JLJiayuan Li

Jiayuan Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jiayuan Li has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Optimizing Parameters with FEM Model for 20CrMnTi Laser Shocking

    by Jie Sun, Jiayuan Li, Xiuyu Chen, Zhilong Xu, Yuru Lin, Qingshan Jiang, Junying Chen, Yi Li

    As a new surface treatment technology, laser shock peening (LSP) is a multi-point overlay process of single-point laser shock. In this study, the finite element method (FEM) was used to build a model of single-point laser shock, and the model was verified by experiments. The difference in residual stresses between the experimental and simulated results was less than 20%. Then, the effects of the stress field and deformation of 20CrMnTi with different laser shock parameters were simulated and analyzed. According to the mechanical response of 20CrMnTi to different laser shock parameters, the optimal shocking process parameters for single-point shocking via LSP were determined to be a shock energy of 5 J, a laser pulse width of 20 ns, and an impact number of 5. Lastly, a simulation of multi-point laser shock was performed with the optimal parameters, and the residual compressive stress values of multi-point impacts are close to those of single-point impacts under the same process conditions.


  • Open Access

    Optimization of Laser Shock Process Parameters for 40Cr Steel

    by Xiuyu Chen, Jie Sun, Zhilong Xu, Junying Chen, Qingshan Jiang, Yi Li, Jiayuan Li, Jun Cheng

    Laser shock peening (LSP) process parameters have an important influence on the strengthening effect. In this study, theoretical calculations were used to determine a suitable range of stress wave peaks (5.09 GPa–6.36 GPa) for laser shocking, which consider the material properties of alloy steel 40Cr. In addition to theoretical calculations, the finite element numerical simulation of a single-point laser shock was also performed. The residual stresses of specimens under different shock pressure waves were simulated, and then the optimal pulse width was determined as 20 ns and the optimal pulse energy was determined as 10 J. Finally, the influences of different pulse energies on the microhardness, residual stress, microstructure, and shock-affected layer thickness of metallic materials were comprehensively investigated through experiments, and the optimization of the laser shock energy was proved to be 10 J. An optimized combination of parameters of a single-point laser shock for 40Cr was obtained, in which the spot diameter was 3 mm, the pulse width was 20 ns, and the pulse energy was 10 J. The study has implications for the selection of LSP process parameters for alloy steels.