Huiyi Guo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Huiyi Guo has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Yan-Ge Liu
Nankai University
4 shared publications - Zhi Wang
Nankai University
4 shared publications - Yundong Hao
Institute of Modern Optics, Nankai University, Tianjin 300350, China
2 shared publications - Zekun Shi
Institute of Modern Optics, Tianjin Key Laboratory of Micro-scale Optical Information Science and Technology, Nankai University, Tianjin, China
2 shared publications - Baiwei Mao
Tianjin Key Laboratory of Micro-scale Optical Information Science and Technology, Institute of Modern Optics, Nankai University, Tianjin, China
1 shared publication - Hongwei Zhang
Institute of Modern Optics, Nankai University, 12538 Tianjin, Tianjin China
1 shared publication
Latest Publications
- 11 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (23) , 8399-8404
High-Order Mode Conversion Employing a Fiber Bundle Scheme
In this paper, a transplantable, low-loss, high-purity, and ultra-broadband mode conversion scheme employing a fiber bundle constructed with one single-mode fiber and multiple coreless fibers is proposed. The feasibility of the mode conversion scheme is theoretically demonstrated and experimentally verified through a 9-core LP41 mode converter. The purity of selectively excited LP41 mode group is estimated to be 88.74%. The insertion loss of the LP41 converter is less than 0.40 dB within a measurement bandwidth exceeding 280 nm. And the transplantability of the mode conversion scheme is verified through a 13-core LP61 mode converter with an insertion loss less than 0.70 dB at 1550 nm, which is the highest order mode conversion achieved so far with an all-fiber structure to the best of our knowledge. This work provides a new implementation scheme for mode converters, which will undoubtedly promote the development of space-division multiplexing technology.
- 11 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (23) , 8399-8404
High-Order Mode Conversion Employing a Fiber Bundle Scheme
In this paper, a transplantable, low-loss, high-purity, and ultra-broadband mode conversion scheme employing a fiber bundle constructed with one single-mode fiber and multiple coreless fibers is proposed. The feasibility of the mode conversion scheme is theoretically demonstrated and experimentally verified through a 9-core LP41 mode converter. The purity of selectively excited LP41 mode group is estimated to be 88.74%. The insertion loss of the LP41 converter is less than 0.40 dB within a measurement bandwidth exceeding 280 nm. And the transplantability of the mode conversion scheme is verified through a 13-core LP61 mode converter with an insertion loss less than 0.70 dB at 1550 nm, which is the highest order mode conversion achieved so far with an all-fiber structure to the best of our knowledge. This work provides a new implementation scheme for mode converters, which will undoubtedly promote the development of space-division multiplexing technology.
- Open Access
- 15 April 2024
- Published by Wiley in Nanophotonics
- Vol. 13 (16) , 2925-2936
Simultaneous generation of first‐ to fourth‐order OAM modes based on a cascaded preset‐twist long‐period fiber grating
We propose and demonstrate the simulation and fabrication of an all‐fiber orbital angular momentum (OAM) mode converter capable of generating first‐ to fourth‐order modes simultaneously, which is realized by inscribing a cascaded preset‐twist long‐period fiber grating (CPT‐LPFG) in a six‐mode fiber utilizing a CO 2 laser. A new segmented Runge–Kutta method is proposed to simulate the preset‐twist long‐period fiber gratings. By calculating the twist angle and relative coupling coefficient for each pitch and then solving the coupled mode equations utilizing the Runge–Kutta algorithm. The simulation illustrates that the preset‐twist method significantly improves the coupling coefficient of higher‐order modes, thereby reducing coupling difficulty. In the experiment, by twisting the fiber at an angle of 1080° and fabricating cascaded gratings with periods of 745 μm, 310 μm, 204 μm, and 146 μm, it is feasible to generate first‐ to fourth‐order OAM modes simultaneously, at wavelengths of 1635 nm, 1548 nm, 1460 nm, and 1334 nm, respectively. The insertion loss is less than 1 dB, and the mode purity is over 90 %. To the best of our knowledge, this is the first time that first‐ to fourth‐order OAM modes are simultaneously generated utilizing a single long‐period fiber grating.
- 15 April 2024
- Published by Wiley in Nanophotonics
- Vol. 13 (16) , 2925-2936
Open AccessSimultaneous generation of first‐ to fourth‐order OAM modes based on a cascaded preset‐twist long‐period fiber grating
We propose and demonstrate the simulation and fabrication of an all‐fiber orbital angular momentum (OAM) mode converter capable of generating first‐ to fourth‐order modes simultaneously, which is realized by inscribing a cascaded preset‐twist long‐period fiber grating (CPT‐LPFG) in a six‐mode fiber utilizing a CO 2 laser. A new segmented Runge–Kutta method is proposed to simulate the preset‐twist long‐period fiber gratings. By calculating the twist angle and relative coupling coefficient for each pitch and then solving the coupled mode equations utilizing the Runge–Kutta algorithm. The simulation illustrates that the preset‐twist method significantly improves the coupling coefficient of higher‐order modes, thereby reducing coupling difficulty. In the experiment, by twisting the fiber at an angle of 1080° and fabricating cascaded gratings with periods of 745 μm, 310 μm, 204 μm, and 146 μm, it is feasible to generate first‐ to fourth‐order OAM modes simultaneously, at wavelengths of 1635 nm, 1548 nm, 1460 nm, and 1334 nm, respectively. The insertion loss is less than 1 dB, and the mode purity is over 90 %. To the best of our knowledge, this is the first time that first‐ to fourth‐order OAM modes are simultaneously generated utilizing a single long‐period fiber grating.
- Open Access
- 19 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 15 (6) , 1-8
Wideband Low Loss Bending-Resistance Hollow-Core Fiber With Hybrid Claddings of Antiresonance and Photonic Bandgap Guidance Mechanisms
Hollow-core anti-resonant fibers (HC-ANF) have the advantages of low scattering loss, wide bandwidth and simplicity of preparation, but are sensitive to bend, which limits their practical applications. On the contrary, hollow-core photonic bandgap (HC-PBGF) fibers have lower confinement loss and more robust bending characteristic, but exhibit unavoidable high scattering loss, influence of surface modes and stricter manufacturing processes. In this paper, a novel hollow-core hybrid cladding fiber (HC-HBCF) which consists of anti-resonant circular tubes of inner cladding and periodically arranged air holes of outer cladding is proposed and investigated numerically. The results show that combining the claddings of antiresonance and photonic bandgap guidance mechanisms can effectively reduce the mode confinement loss by five and six orders of magnitude compared to the fibers with two claddings alone respectively. The proposed HC-HBCF exhibits similar excellent low scattering loss and spectral flatness as the single-tube anti-resonant fiber. Specifically, the proposed HC-HBCF exhibits the confinement loss of 5×10 -5 dB/km at 1550 nm and a total loss of 0.1 dB/km from 1430 nm to 1770 nm. Meanwhile, the hybrid cladding fiber has an outstanding bending property with a bending loss of 0.16 dB/km at a small bending radius of 2 cm. The mode properties of HC-HBCF are also calculated and analyzed, indicating that the hybrid cladding fiber has a unique potential in controlling modal content.
- 19 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 15 (6) , 1-8
Open AccessWideband Low Loss Bending-Resistance Hollow-Core Fiber With Hybrid Claddings of Antiresonance and Photonic Bandgap Guidance Mechanisms
Hollow-core anti-resonant fibers (HC-ANF) have the advantages of low scattering loss, wide bandwidth and simplicity of preparation, but are sensitive to bend, which limits their practical applications. On the contrary, hollow-core photonic bandgap (HC-PBGF) fibers have lower confinement loss and more robust bending characteristic, but exhibit unavoidable high scattering loss, influence of surface modes and stricter manufacturing processes. In this paper, a novel hollow-core hybrid cladding fiber (HC-HBCF) which consists of anti-resonant circular tubes of inner cladding and periodically arranged air holes of outer cladding is proposed and investigated numerically. The results show that combining the claddings of antiresonance and photonic bandgap guidance mechanisms can effectively reduce the mode confinement loss by five and six orders of magnitude compared to the fibers with two claddings alone respectively. The proposed HC-HBCF exhibits similar excellent low scattering loss and spectral flatness as the single-tube anti-resonant fiber. Specifically, the proposed HC-HBCF exhibits the confinement loss of 5×10 -5 dB/km at 1550 nm and a total loss of 0.1 dB/km from 1430 nm to 1770 nm. Meanwhile, the hybrid cladding fiber has an outstanding bending property with a bending loss of 0.16 dB/km at a small bending radius of 2 cm. The mode properties of HC-HBCF are also calculated and analyzed, indicating that the hybrid cladding fiber has a unique potential in controlling modal content.
- 20 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. PP (07338724) , 1
An accurate method for measuring the proportions of degenerated spatial modes in fibers
As a fundamental issue, determining the proportions of spatial modes in multimode fibers has been continuously discussed over the past few years. People have successfully measured the components of spatial modes with different orders but have rarely addressed the measurement of degenerated modes under these spatial modes. In this paper, we propose an interference method to measure the proportions of these degenerated modes. This method is based on the discussion of coherent superposition of degenerated modes in multimode fibers. In the experiment, we randomly generate spatial states in two-mode fibers and simulate these phenomena according to the proposed method, which agrees well with the experiment. This measuring method improves the accuracy of mode measurement from mode groups to degenerated modes and may provide a unique perspective for the field of multimode fibers.
- 20 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. PP (07338724) , 1
An accurate method for measuring the proportions of degenerated spatial modes in fibers
As a fundamental issue, determining the proportions of spatial modes in multimode fibers has been continuously discussed over the past few years. People have successfully measured the components of spatial modes with different orders but have rarely addressed the measurement of degenerated modes under these spatial modes. In this paper, we propose an interference method to measure the proportions of these degenerated modes. This method is based on the discussion of coherent superposition of degenerated modes in multimode fibers. In the experiment, we randomly generate spatial states in two-mode fibers and simulate these phenomena according to the proposed method, which agrees well with the experiment. This measuring method improves the accuracy of mode measurement from mode groups to degenerated modes and may provide a unique perspective for the field of multimode fibers.