Song-Song Qian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Song-Song Qian has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Wen Wu
Nanjing University of Science and Technology
4 shared publications - Zhi-Yuan Zong
Key Laboratory of Near-Range RF Sensing ICs and Microsystems, Ministry of Education, School of Electronic and Optical Engineering, Nanjing University of Science and Technology (NJUST), Nanjing, China
4 shared publications - Xiang Wang
Nanjing University of Science and Technology
3 shared publications - Boyu Sima
School of Electronic and Optical Engineering, Nanjing University of Science and Technology, Nanjing, China
2 shared publications - Huangyan Li
Nanjing University of Science and Technology
2 shared publications - Jing Xia
Jiangsu University
2 shared publications
Latest Publications
- 24 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. PP (15361225) , 1-5
A Multi-Beam Synthesis Method for Uniform Sparse Arrays Based on Visible Region Analysis
This paper proposes a multi-beam synthesis method for uniform sparse arrays based on visible region analysis. By analyzing the distribution characteristics of the array pattern within the visible region, the number and arrangement of the sparse array elements are determined. The element excitations are then calculated using either the pseudo-inverse method or convex optimization, and mutual coupling effects can be further incorporated by introducing the active element patterns. The designed array features a symmetrical structure and maximized uniformity, which effectively reduces system complexity and implementation cost. Validation through several one- and two-dimensional multi-beam synthesis examples demonstrates that this method achieves high sparsity, a compact aperture, and a large minimum element spacing while preserving shaped beam performance. Meanwhile, its synthesis efficiency is significantly superior to fully numerical optimization methods, indicating strong potential for engineering applications.
- 24 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. PP (15361225) , 1-5
A Multi-Beam Synthesis Method for Uniform Sparse Arrays Based on Visible Region Analysis
This paper proposes a multi-beam synthesis method for uniform sparse arrays based on visible region analysis. By analyzing the distribution characteristics of the array pattern within the visible region, the number and arrangement of the sparse array elements are determined. The element excitations are then calculated using either the pseudo-inverse method or convex optimization, and mutual coupling effects can be further incorporated by introducing the active element patterns. The designed array features a symmetrical structure and maximized uniformity, which effectively reduces system complexity and implementation cost. Validation through several one- and two-dimensional multi-beam synthesis examples demonstrates that this method achieves high sparsity, a compact aperture, and a large minimum element spacing while preserving shaped beam performance. Meanwhile, its synthesis efficiency is significantly superior to fully numerical optimization methods, indicating strong potential for engineering applications.
- 25 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (5) , 1960-1964
A Wideband Low-Pass Frequency Selective Surface With Sharp Roll-Off and Extensive Deep Stopband
This paper presents a wideband lowpass frequency selective surface (FSS) with wide stopband of deep rejection and sharp roll-off for high selectivity. The proposed structure employs a triple-layer structural configuration separated by two supporting honeycomb layers, which facilitates the strategic distribution of three transmission poles and four transmission zeros, enabling high frequency selectivity and wide stopband performance. An equivalent circuit model is developed to elucidate the operational mechanism, showing excellent agreement with full-wave simulations. The FSS exhibits a low insertion loss of less than 1.67 dB within the lowpass band up to 12.26 GHz, while maintaining a transmission coefficient below -10 dB from 12.45 GHz to 21.11 GHz. A remarkably narrow transition band of only 160 MHz between -3 dB and -10 dB underscores its steep roll-off characteristic. A prototype is fabricated and measured, demonstrating good agreement with simulations and stable performance under both TE and TM polarizations for incident angles up to 45°.
- 25 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (5) , 1960-1964
A Wideband Low-Pass Frequency Selective Surface With Sharp Roll-Off and Extensive Deep Stopband
This paper presents a wideband lowpass frequency selective surface (FSS) with wide stopband of deep rejection and sharp roll-off for high selectivity. The proposed structure employs a triple-layer structural configuration separated by two supporting honeycomb layers, which facilitates the strategic distribution of three transmission poles and four transmission zeros, enabling high frequency selectivity and wide stopband performance. An equivalent circuit model is developed to elucidate the operational mechanism, showing excellent agreement with full-wave simulations. The FSS exhibits a low insertion loss of less than 1.67 dB within the lowpass band up to 12.26 GHz, while maintaining a transmission coefficient below -10 dB from 12.45 GHz to 21.11 GHz. A remarkably narrow transition band of only 160 MHz between -3 dB and -10 dB underscores its steep roll-off characteristic. A prototype is fabricated and measured, demonstrating good agreement with simulations and stable performance under both TE and TM polarizations for incident angles up to 45°.
- 27 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (1) , 753-767
Analysis and Design of a Broadband Filtering Doherty Power Amplifier Incorporating Harmonic Suppression Post-Matching Network
This article proposes a comprehensive design methodology for a broadband filtering Doherty power amplifier (FDPA) incorporating an integrated harmonic suppression network (IHSN) as post-matching network (PMN). First, unlike the conventional Wilkinson power divider, the input stage of the proposed Doherty power amplifier (DPA) employs a third-order cascaded trisection (CT) filtering power divider (FPD) network, implemented using a twelfth circular SIW (TCSIW) resonator. The proposed structure exhibits a bandpass response featuring a transmission zero at the upper stopband. Moreover, the physical footprint of the FPD is significantly decreased to 36.2% of its original size through the integration of L-shaped slots into the circular SIW, achieving a more compact design. Second, the PMN at the output of the DPA incorporates a pair of radial stubs and high-impedance short-circuited microstrip lines. The combination exhibits a bandpass response with an extended stopband to mitigate the high-order harmonic components generated by the nonlinearity of the DPA. Finally, to expand the bandwidth, a quarter-wavelength transmission line is added to the output of the peaking amplifier as an integrated compensating reactance (ICR). For verification and comparison, two types of DPAs are designed and fabricated: a conventional DPA with a Wilkinson power divider and a stepped-impedance PMN, and a filtering DPA with enhanced harmonic suppression characteristics. Measurement results reveal that the proposed DPA exhibits a filtering response with a wide suppression band up to the fifth harmonic frequency. Meanwhile, the proposed FDPA maintains a 6-dB back-off efficiency of 45%–55% and a saturated efficiency of 57%–69% over the operational frequency band of 1.8–2.6 GHz (36.4% fractional bandwidth), with a saturated output power exceeding 42.5 dBm. Furthermore, the proposed DPA achieves a maximum suppression level of 34 and 71 dBc for the second- and third-harmonic components.
- 27 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (1) , 753-767
Analysis and Design of a Broadband Filtering Doherty Power Amplifier Incorporating Harmonic Suppression Post-Matching Network
This article proposes a comprehensive design methodology for a broadband filtering Doherty power amplifier (FDPA) incorporating an integrated harmonic suppression network (IHSN) as post-matching network (PMN). First, unlike the conventional Wilkinson power divider, the input stage of the proposed Doherty power amplifier (DPA) employs a third-order cascaded trisection (CT) filtering power divider (FPD) network, implemented using a twelfth circular SIW (TCSIW) resonator. The proposed structure exhibits a bandpass response featuring a transmission zero at the upper stopband. Moreover, the physical footprint of the FPD is significantly decreased to 36.2% of its original size through the integration of L-shaped slots into the circular SIW, achieving a more compact design. Second, the PMN at the output of the DPA incorporates a pair of radial stubs and high-impedance short-circuited microstrip lines. The combination exhibits a bandpass response with an extended stopband to mitigate the high-order harmonic components generated by the nonlinearity of the DPA. Finally, to expand the bandwidth, a quarter-wavelength transmission line is added to the output of the peaking amplifier as an integrated compensating reactance (ICR). For verification and comparison, two types of DPAs are designed and fabricated: a conventional DPA with a Wilkinson power divider and a stepped-impedance PMN, and a filtering DPA with enhanced harmonic suppression characteristics. Measurement results reveal that the proposed DPA exhibits a filtering response with a wide suppression band up to the fifth harmonic frequency. Meanwhile, the proposed FDPA maintains a 6-dB back-off efficiency of 45%–55% and a saturated efficiency of 57%–69% over the operational frequency band of 1.8–2.6 GHz (36.4% fractional bandwidth), with a saturated output power exceeding 42.5 dBm. Furthermore, the proposed DPA achieves a maximum suppression level of 34 and 71 dBc for the second- and third-harmonic components.
- 30 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (11) , 1247-1250
Broadband Filtering Power Divider Employing Hybrid Quarter Circular/Cambered SIW Cavity and MSL Resonators
In this letter, a broadband filtering power divider (FPD) based on a quarter circular/cambered substrate integrated waveguide (QCCSIW) cavity and microstrip line (MSL) resonators is proposed. First, a second-order bandpass filter (BPF) is designed based on the arc-shaped coupling of the QCCSIW. Second, a pair of quarter-wavelength ( $\lambda $ /4) MSL resonators are integrated into the QCCSIW cavity to form a fourth-order asymmetric BPF with a pair of transmission zeros (TZs). Finally, a hybrid QCCSIW and MSL FPD with isolation is investigated. For verification, all BPFs and FPD are simulated, fabricated, and measured. The proposed FPD demonstrates a center frequency of 4.99 GHz, a 3-dB fractional bandwidth (FBW) of 37.11% (1.85 GHz), and an insertion loss (IL) of 0.8 dB. The port isolation is greater than 11 dB within the entire passband. Meanwhile, a pair of TZs are generated at 3.62 and 6.35 GHz respectively. The proposed hybrid QCCSIW and MSL FPD possesses an overall size of 1.73 $\times$ 1.74 $\lambda_{{g}}$ , featuring advantages of broad bandwidth, compact size, and superior selectivity.
- 30 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (11) , 1247-1250
Broadband Filtering Power Divider Employing Hybrid Quarter Circular/Cambered SIW Cavity and MSL Resonators
In this letter, a broadband filtering power divider (FPD) based on a quarter circular/cambered substrate integrated waveguide (QCCSIW) cavity and microstrip line (MSL) resonators is proposed. First, a second-order bandpass filter (BPF) is designed based on the arc-shaped coupling of the QCCSIW. Second, a pair of quarter-wavelength ( $\lambda $ /4) MSL resonators are integrated into the QCCSIW cavity to form a fourth-order asymmetric BPF with a pair of transmission zeros (TZs). Finally, a hybrid QCCSIW and MSL FPD with isolation is investigated. For verification, all BPFs and FPD are simulated, fabricated, and measured. The proposed FPD demonstrates a center frequency of 4.99 GHz, a 3-dB fractional bandwidth (FBW) of 37.11% (1.85 GHz), and an insertion loss (IL) of 0.8 dB. The port isolation is greater than 11 dB within the entire passband. Meanwhile, a pair of TZs are generated at 3.62 and 6.35 GHz respectively. The proposed hybrid QCCSIW and MSL FPD possesses an overall size of 1.73 $\times$ 1.74 $\lambda_{{g}}$ , featuring advantages of broad bandwidth, compact size, and superior selectivity.
- Open Access
- 24 July 2023
- Published by Wiley
A wideband cylindrical conformal microstrip mimo antenna array
In this paper, a wideband cylindrical conformal microstrip antenna array employing a proximity-coupled feeding mechanism with a cavity-backed configuration is designed and fabricated. Compared with other conformal microstrip patch antennas by using linear subarrays assembled piecewise, this design uses Teflon instead of traditional dielectric layers, and makes it possible to process the whole conformal array without splicing, obtaining the freedom in unit size and array radius adjustment except ease of manufacturing and assemblage. Combined with the optimization of the cavity size, an array with 44 elements is obtained which has a bandwidth of 40% from 8 to 12GHz and a gain of 16.4 dB.
- 24 July 2023
- Published by Wiley
Open AccessA wideband cylindrical conformal microstrip mimo antenna array
In this paper, a wideband cylindrical conformal microstrip antenna array employing a proximity-coupled feeding mechanism with a cavity-backed configuration is designed and fabricated. Compared with other conformal microstrip patch antennas by using linear subarrays assembled piecewise, this design uses Teflon instead of traditional dielectric layers, and makes it possible to process the whole conformal array without splicing, obtaining the freedom in unit size and array radius adjustment except ease of manufacturing and assemblage. Combined with the optimization of the cavity size, an array with 44 elements is obtained which has a bandwidth of 40% from 8 to 12GHz and a gain of 16.4 dB.
- 9 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 19 (8) , 1345-1349
Flexible and Transparent W-Band Absorber Fabricated by EHD Printing Technology
A mechanically-flexible and optically-transparent millimeter-wave broadband absorber was proposed and fabricated. The absorber showed >90% absorption in (73.5-110) GHz, covering the whole W-band. The key frequency selective surface (FSS) used a concise metal mesh structure fabricated by the electrohydrodynamics (EHD) printing technology, which formed a classic sandwich structure together with a transparent dielectric layer and a transparent and conductive backplane. The transmittance of the sample in the visible light region was 58.1%. To testify the flexibility, the absorber was conformed to cylinders with radius of 34 mm and 16 mm, respectively. The measured normalized S11 increased with bending. Simulation results also showed that the absorption over W-band was >80% within (0-45) ° incident angle, and was insensitive to the polarization angle.
- 9 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 19 (8) , 1345-1349
Flexible and Transparent W-Band Absorber Fabricated by EHD Printing Technology
A mechanically-flexible and optically-transparent millimeter-wave broadband absorber was proposed and fabricated. The absorber showed >90% absorption in (73.5-110) GHz, covering the whole W-band. The key frequency selective surface (FSS) used a concise metal mesh structure fabricated by the electrohydrodynamics (EHD) printing technology, which formed a classic sandwich structure together with a transparent dielectric layer and a transparent and conductive backplane. The transmittance of the sample in the visible light region was 58.1%. To testify the flexibility, the absorber was conformed to cylinders with radius of 34 mm and 16 mm, respectively. The measured normalized S11 increased with bending. Simulation results also showed that the absorption over W-band was >80% within (0-45) ° incident angle, and was insensitive to the polarization angle.