Lambert J. Geerligs
Research Subjects
Lambert J. Geerligs has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Erik Christian Garnett
LMPV-Sustainable Energy Materials Department, AMOLF Institute, Science Park 104, Amsterdam, 1098XG, The Netherlands
3 shared publications - Gianluca Coletti
School of Photovoltaic and Renewable Energy Engineering
3 shared publications - Sarah C. Gillespie
LMPV-Sustainable Energy Materials Department, AMOLF Institute, Science Park 104, Amsterdam, 1098XG, The Netherlands
3 shared publications - Veronique S. Gevaerts
TNO Department Solar Energy, Westerduinweg 3, Petten, 1755LE, The Netherlands
3 shared publications - Bart Macco
Department of Applied Physics and Science Education Eindhoven University of Technology Eindhoven The Netherlands
2 shared publications - Bruno Ehrler
AMOLF, Science Park 104, 1098 XG Amsterdam, The Netherlands
2 shared publications
Latest Publications
- 24 March 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (4) , 3330-3339
Photoluminescence Mapping of Mobile and Fixed Defects in Halide Perovskite Films
- 24 March 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (4) , 3330-3339
Photoluminescence Mapping of Mobile and Fixed Defects in Halide Perovskite Films
- Open Access
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in EES Solar
Resolving mobile halide diffusion in perovskite films with frequency-domain photoluminescence
Intensity-modulated photoluminescence spectroscopy (IMPLS) is a frequency-domain, fully optical technique that probes ionic processes in halide perovskites.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in EES Solar
Open AccessResolving mobile halide diffusion in perovskite films with frequency-domain photoluminescence
Intensity-modulated photoluminescence spectroscopy (IMPLS) is a frequency-domain, fully optical technique that probes ionic processes in halide perovskites.
- Open Access
- 18 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (43) , 59476-59485
Excitation Intervals Enhance Performance in Perovskite Solar Cells
Halide perovskites face intrinsic stability challenges primarily due to light- and bias-induced ion migration. To mitigate ion-mediated degradation on operationally relevant time scales, this work investigates how introducing brief periodic intervals of light and darkness (LD cycling) can stabilize the average efficiency of perovskite films and devices. Systematic photoluminescence (PL) studies reveal that dark intervals on the order of seconds significantly suppress nonradiative recombination and slow degradation. The extent of PL enhancement depends on the duration of the dark time, the material composition, and critically, the sample's age. Remarkably, LD cycling increases PL by more than 7-fold even in aged samples that would otherwise undergo photodarkening under continuous illumination. Moreover, the PL kinetics under LD cycling mirror the corresponding open-circuit voltage dynamics in full solar cells, showing that local emission changes provide a direct measure of device-level behavior. Device measurements similarly show that LD cycling enhances the power conversion efficiency compared to continuous illumination and mitigates deterioration over extended operation. This strategy highlights a potential pathway to dynamically preserve or even improve perovskite performance in future optoelectronic applications.
- 18 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (43) , 59476-59485
Open AccessExcitation Intervals Enhance Performance in Perovskite Solar Cells
Halide perovskites face intrinsic stability challenges primarily due to light- and bias-induced ion migration. To mitigate ion-mediated degradation on operationally relevant time scales, this work investigates how introducing brief periodic intervals of light and darkness (LD cycling) can stabilize the average efficiency of perovskite films and devices. Systematic photoluminescence (PL) studies reveal that dark intervals on the order of seconds significantly suppress nonradiative recombination and slow degradation. The extent of PL enhancement depends on the duration of the dark time, the material composition, and critically, the sample's age. Remarkably, LD cycling increases PL by more than 7-fold even in aged samples that would otherwise undergo photodarkening under continuous illumination. Moreover, the PL kinetics under LD cycling mirror the corresponding open-circuit voltage dynamics in full solar cells, showing that local emission changes provide a direct measure of device-level behavior. Device measurements similarly show that LD cycling enhances the power conversion efficiency compared to continuous illumination and mitigates deterioration over extended operation. This strategy highlights a potential pathway to dynamically preserve or even improve perovskite performance in future optoelectronic applications.
- 18 November 2024
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 33 (12) , 1387-1399
Potential for Recycled Silicon Solar Cells as Feedstock for New Ingot Growth
This paper investigates, by modeling, the potential for high‐value recycling of silicon wafers recovered from end‐of‐life PV modules. Technology for PV module recycling is making steady progress, both at recycling companies and R&D institutes, and it is possible that as a result, soon a stream of wafers or wafer fragments recovered from waste modules will become commercially available. Recycling the silicon for manufacturing of new PV modules is an opportunity both for reduction of cost and reduction of environmental footprint of PV. In this paper, we analyze possibilities for recycling of wafer fragments as feedstock for new silicon ingot growth . This could save up to about 0.16 kWh/Wp energy for production of the new PV system. Compared with lower value applications of the recovered silicon, the potential value and energy savings when used as feedstock for ingot growth are considerably higher. This paper presents the possibilities and challenges for recycling wafer fragments from the point of view of dopant type and resistivity control, and mitigation of the impact of recombination activity from possible increased impurity levels or related to boron. Because in current PV production a rapid transition to n‐type wafer doping is taking place, the paper also considers the question what can be done with p‐type doped recycled wafer material. We illustrate how application for perovskite–silicon tandem cells helps to mitigate possible performance loss from metallic impurities or boron. The application in tandem cells is perhaps the only realistic approach to make economically worthwhile use of recycled B‐doped silicon as feedstock for silicon ingot growth.
- 18 November 2024
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 33 (12) , 1387-1399
Potential for Recycled Silicon Solar Cells as Feedstock for New Ingot Growth
This paper investigates, by modeling, the potential for high‐value recycling of silicon wafers recovered from end‐of‐life PV modules. Technology for PV module recycling is making steady progress, both at recycling companies and R&D institutes, and it is possible that as a result, soon a stream of wafers or wafer fragments recovered from waste modules will become commercially available. Recycling the silicon for manufacturing of new PV modules is an opportunity both for reduction of cost and reduction of environmental footprint of PV. In this paper, we analyze possibilities for recycling of wafer fragments as feedstock for new silicon ingot growth . This could save up to about 0.16 kWh/Wp energy for production of the new PV system. Compared with lower value applications of the recovered silicon, the potential value and energy savings when used as feedstock for ingot growth are considerably higher. This paper presents the possibilities and challenges for recycling wafer fragments from the point of view of dopant type and resistivity control, and mitigation of the impact of recombination activity from possible increased impurity levels or related to boron. Because in current PV production a rapid transition to n‐type wafer doping is taking place, the paper also considers the question what can be done with p‐type doped recycled wafer material. We illustrate how application for perovskite–silicon tandem cells helps to mitigate possible performance loss from metallic impurities or boron. The application in tandem cells is perhaps the only realistic approach to make economically worthwhile use of recycled B‐doped silicon as feedstock for silicon ingot growth.
- Open Access
- 18 August 2023
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 261
Atomic layer deposition of NiO applied in a monolithic perovskite/PERC tandem cell
- 18 August 2023
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 261
Open AccessAtomic layer deposition of NiO applied in a monolithic perovskite/PERC tandem cell
- Open Access
- 28 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 12 (6) , 1377-1385
Effective Hydrogenation of Poly-Si Passivating Contacts by Atomic-Layer-Deposited Nickel Oxide
In recent years, passivating contacts based on SiO 2 /poly-Si have proven to be an enabling technology for Si solar cells. Effective hydrogenation of the interfacial SiO 2 is vital for realizing efficient contacts. Hydrogen-rich dielectrics, such as SiN x and Al 2 O 3 , are commonly employed for hydrogenation, whereas also recently, n -type conductive oxides, such as In 2 O 3 :Sn and ZnO, have been demonstrated to yield excellent hydrogenation. This study presents the use of a p -type metal oxide, specifically NiO, as a suitable hydrogenation source. The p -type character of NiO makes it an interesting candidate for hydrogenation because of its potential use in selective contacting structures. Herein, we show that NiO, synthesized by atomic layer deposition (ALD), can be used to hydrogenate poly-Si/SiO 2 contacts effectively. Furthermore, we benchmark its hydrogenation performance to the established ALD ZnO/Al 2 O 3 stack and provide insights into the hydrogenation process. On planar surfaces, NiO yields almost as excellent results as ZnO/Al 2 O 3 stacks, whereas it lags behind on more challenging textured surfaces. Interestingly, even though elastic recoil detection analysis reveals that ALD NiO is rich in hydrogen, secondary ion mass spectrometry measurements show that, when NiO is compared to the ZnO/Al 2 O 3 stack, less hydrogen is present at the Si/SiO 2 interface after annealing. This is explained from effusion measurements, which show substantial effusion of hydrogen from NiO around 300 °C. Hence, Al 2 O 3 capping is further employed to prevent hydrogen loss and on textured wafers, the NiO/Al 2 O 3 stacks on poly-Si achieve an implied open-circuit voltage of 728 mV, confirming the excellent hydrogenation from ALD metal oxides.
- 28 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 12 (6) , 1377-1385
Open AccessEffective Hydrogenation of Poly-Si Passivating Contacts by Atomic-Layer-Deposited Nickel Oxide
In recent years, passivating contacts based on SiO 2 /poly-Si have proven to be an enabling technology for Si solar cells. Effective hydrogenation of the interfacial SiO 2 is vital for realizing efficient contacts. Hydrogen-rich dielectrics, such as SiN x and Al 2 O 3 , are commonly employed for hydrogenation, whereas also recently, n -type conductive oxides, such as In 2 O 3 :Sn and ZnO, have been demonstrated to yield excellent hydrogenation. This study presents the use of a p -type metal oxide, specifically NiO, as a suitable hydrogenation source. The p -type character of NiO makes it an interesting candidate for hydrogenation because of its potential use in selective contacting structures. Herein, we show that NiO, synthesized by atomic layer deposition (ALD), can be used to hydrogenate poly-Si/SiO 2 contacts effectively. Furthermore, we benchmark its hydrogenation performance to the established ALD ZnO/Al 2 O 3 stack and provide insights into the hydrogenation process. On planar surfaces, NiO yields almost as excellent results as ZnO/Al 2 O 3 stacks, whereas it lags behind on more challenging textured surfaces. Interestingly, even though elastic recoil detection analysis reveals that ALD NiO is rich in hydrogen, secondary ion mass spectrometry measurements show that, when NiO is compared to the ZnO/Al 2 O 3 stack, less hydrogen is present at the Si/SiO 2 interface after annealing. This is explained from effusion measurements, which show substantial effusion of hydrogen from NiO around 300 °C. Hence, Al 2 O 3 capping is further employed to prevent hydrogen loss and on textured wafers, the NiO/Al 2 O 3 stacks on poly-Si achieve an implied open-circuit voltage of 728 mV, confirming the excellent hydrogenation from ALD metal oxides.
- 10 August 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 01608371,p. 1257-1260
N-type multicrystalline silicon: material for solar cell processes with high efficiency potential
We present the characterisation of directionally solidified n-type Si ingots. Three ingots with a range of bulk resistivities and different n-type doping elements (Sb, P and As) were studied. We show from Hall measurements that the mc-Si material has excellent electrical transport properties. The mobilities are close to the theoretical limit, which is given mainly by scattering at acoustical phonons. Mobilities so close to the theoretical value have, to our knowledge, not been demonstrated for comparable p-type mc-Si wafers. Additional measurements on high quality p-type mc-Si material support this statement. This means that other scattering mechanisms reduce the mobility in p-type mc-Si material, but are not present in n-type silicon. Lifetime measurements were conducted by /spl mu/W-PCD using an iodine-ethanol surface passivation. This passivation was used preferably to SiN/sub x/, as in some experiments the hydrogen from the PECVD SiN seemed to passivate the bulk at deposition temperatures. Average values in excess of 120 /spl mu/s over large areas were measured. In order to exploit the good material properties of n-type mc-Si, solar cell concepts must be developed and the processes optimised. B-diffusion is the most problematic step as it is considered to be both destructive to material quality and energy consuming. In this paper, we show that a BBr/sub 3/-emitter diffusion is possible at moderate temperatures without degrading the carrier lifetime of the mc-Si material. An additional contribution from Libal et al. on solar cell processing is included in this conference.
- 10 August 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 01608371,p. 1257-1260
N-type multicrystalline silicon: material for solar cell processes with high efficiency potential
We present the characterisation of directionally solidified n-type Si ingots. Three ingots with a range of bulk resistivities and different n-type doping elements (Sb, P and As) were studied. We show from Hall measurements that the mc-Si material has excellent electrical transport properties. The mobilities are close to the theoretical limit, which is given mainly by scattering at acoustical phonons. Mobilities so close to the theoretical value have, to our knowledge, not been demonstrated for comparable p-type mc-Si wafers. Additional measurements on high quality p-type mc-Si material support this statement. This means that other scattering mechanisms reduce the mobility in p-type mc-Si material, but are not present in n-type silicon. Lifetime measurements were conducted by /spl mu/W-PCD using an iodine-ethanol surface passivation. This passivation was used preferably to SiN/sub x/, as in some experiments the hydrogen from the PECVD SiN seemed to passivate the bulk at deposition temperatures. Average values in excess of 120 /spl mu/s over large areas were measured. In order to exploit the good material properties of n-type mc-Si, solar cell concepts must be developed and the processes optimised. B-diffusion is the most problematic step as it is considered to be both destructive to material quality and energy consuming. In this paper, we show that a BBr/sub 3/-emitter diffusion is possible at moderate temperatures without degrading the carrier lifetime of the mc-Si material. An additional contribution from Libal et al. on solar cell processing is included in this conference.
- 1 January 1991
- Published by Springer Nature
- p. 511-530
Vortices and Charges in Tunnel Junction Networks
- 1 January 1991
- Published by Springer Nature
- p. 511-530
Vortices and Charges in Tunnel Junction Networks