Sungho Park
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sungho Park has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Gun Rae Cho
Autonomous Systems R&D Division, Korea Institute of Robotics & Technology Convergence, Jigok-Ro 39, Nam-gu, Pohang 37666, Republic of Korea
5 shared publications - Chulhee Bae
Korea Institute of Robotics & Technology Convergence, Pohang 37666, Republic of Korea
3 shared publications - Eui-Jung Jung
Human-Robot Interaction Center, Korea Institute of Robotics & Technology Convergence (KIRO), Pohang 37553, Republic of Korea
3 shared publications - Jong-Ho Bae
Korea Institute of Robotics & Technology Convergence, Pohang 37666, Republic of Korea
3 shared publications - Hyunseok Shin
Korea Institute of Robotics and Technology Convergence
2 shared publications - Kwang-Woo Jeon
Korea Institute of Robotics and Technology Convergence, Pohang 37666, Republic of Korea
2 shared publications
Latest Publications
- Open Access
Cylindrical Scan Context: A Multi-Channel Descriptor for Vertical-Structure-Aware LiDAR Localization
This study introduces Cylindrical Scan Context (CSC), a novel LiDAR descriptor designed to improve robustness and efficiency in GPS-denied or degraded outdoor environments. Unlike the conventional Scan Context (SC), which relies on azimuth–range projection, CSC employs an azimuth–height representation that preserves vertical structural information and incorporates multiple physical channels—range, point density, and reflectance intensity—to capture both geometric and radiometric characteristics of the environment. This multi-channel cylindrical formulation enhances descriptor distinctiveness and robustness against viewpoint, elevation, and trajectory variations. To validate the effectiveness of CSC, real-world experiments were conducted using both self-collected coastal–forest datasets and the public MulRan–KAIST dataset. Mapping was performed using LIO-SAM with LiDAR, IMU, and GPS measurements, after which LiDAR-only localization was evaluated independently. A total of approximately 700 query scenes (1 m ground-truth threshold) were used in the self-collected experiments, and about 1200 scenes (3 m threshold) were evaluated in the MulRan–KAIST experiments. Comparative analyses between SC and CSC were performed using Precision–Recall (PR) curves, Detection Recall (DR) curves, Root Mean Square Error (RMSE), and Top-K retrieval accuracy. The results show that CSC consistently yields lower RMSE—particularly in the vertical and lateral directions—and demonstrates faster recall growth and higher stability in global retrieval. Across datasets, CSC maintains superior DR performance in high-confidence regions and achieves up to 45% reduction in distance RMSE in large-scale campus environments. These findings confirm that the cylindrical multi-channel formulation of CSC significantly improves geometric consistency and localization reliability, offering a practical and robust LiDAR-only localization framework for challenging unstructured outdoor environments.
Open AccessCylindrical Scan Context: A Multi-Channel Descriptor for Vertical-Structure-Aware LiDAR Localization
This study introduces Cylindrical Scan Context (CSC), a novel LiDAR descriptor designed to improve robustness and efficiency in GPS-denied or degraded outdoor environments. Unlike the conventional Scan Context (SC), which relies on azimuth–range projection, CSC employs an azimuth–height representation that preserves vertical structural information and incorporates multiple physical channels—range, point density, and reflectance intensity—to capture both geometric and radiometric characteristics of the environment. This multi-channel cylindrical formulation enhances descriptor distinctiveness and robustness against viewpoint, elevation, and trajectory variations. To validate the effectiveness of CSC, real-world experiments were conducted using both self-collected coastal–forest datasets and the public MulRan–KAIST dataset. Mapping was performed using LIO-SAM with LiDAR, IMU, and GPS measurements, after which LiDAR-only localization was evaluated independently. A total of approximately 700 query scenes (1 m ground-truth threshold) were used in the self-collected experiments, and about 1200 scenes (3 m threshold) were evaluated in the MulRan–KAIST experiments. Comparative analyses between SC and CSC were performed using Precision–Recall (PR) curves, Detection Recall (DR) curves, Root Mean Square Error (RMSE), and Top-K retrieval accuracy. The results show that CSC consistently yields lower RMSE—particularly in the vertical and lateral directions—and demonstrates faster recall growth and higher stability in global retrieval. Across datasets, CSC maintains superior DR performance in high-confidence regions and achieves up to 45% reduction in distance RMSE in large-scale campus environments. These findings confirm that the cylindrical multi-channel formulation of CSC significantly improves geometric consistency and localization reliability, offering a practical and robust LiDAR-only localization framework for challenging unstructured outdoor environments.
- Open Access
- 20 November 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (11) , 2214
Robust Relative Space Motion Control of Underwater Vehicles Using Time Delay Estimation
This paper presents a robust trajectory-tracking control framework for underwater vehicles operating in a relative coordinate system. Unlike conventional methods that define trajectories in the world frame, the proposed approach formulates the control problem directly in a moving reference frame, enabling accurate motion control with respect to dynamic and drifting objects affected by environmental disturbances such as ocean currents and waves. This relative-space formulation is particularly advantageous for tasks including diver guidance, floating-object inspection, and docking, where the reference itself is nonstationary. A coordinate transformation is introduced to consistently express the vehicle dynamics in the relative frame. Based on the transformed dynamics, a Time Delay Control (TDC) law is applied to estimate unmodeled dynamics and external disturbances without requiring precise system parameters. Theoretical stability analysis shows that the stability condition of the proposed controller is consistent with that of conventional TDC, allowing similar gain-tuning procedures. Simulation results demonstrate that the proposed controller achieves robust and smooth trajectory tracking even when the reference frame undergoes motion induced by ocean currents.
- 20 November 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (11) , 2214
Open AccessRobust Relative Space Motion Control of Underwater Vehicles Using Time Delay Estimation
This paper presents a robust trajectory-tracking control framework for underwater vehicles operating in a relative coordinate system. Unlike conventional methods that define trajectories in the world frame, the proposed approach formulates the control problem directly in a moving reference frame, enabling accurate motion control with respect to dynamic and drifting objects affected by environmental disturbances such as ocean currents and waves. This relative-space formulation is particularly advantageous for tasks including diver guidance, floating-object inspection, and docking, where the reference itself is nonstationary. A coordinate transformation is introduced to consistently express the vehicle dynamics in the relative frame. Based on the transformed dynamics, a Time Delay Control (TDC) law is applied to estimate unmodeled dynamics and external disturbances without requiring precise system parameters. Theoretical stability analysis shows that the stability condition of the proposed controller is consistent with that of conventional TDC, allowing similar gain-tuning procedures. Simulation results demonstrate that the proposed controller achieves robust and smooth trajectory tracking even when the reference frame undergoes motion induced by ocean currents.
- 28 February 2025
- Published by The Korea Robotics Society in Journal of Korea Robotics Society
- Vol. 20 (1) , 94-103
Advancements in Amphibious Reconnaissance Robots with Screw Wheel Propulsion
- 28 February 2025
- Published by The Korea Robotics Society in Journal of Korea Robotics Society
- Vol. 20 (1) , 94-103
Advancements in Amphibious Reconnaissance Robots with Screw Wheel Propulsion
- 13 February 2025
- Published by Springer Nature
- p. 425-439
Multi-agent Path Planning for Logistics Cargo Environment Using LSTM Based Reinforcement Learning
- 13 February 2025
- Published by Springer Nature
- p. 425-439
Multi-agent Path Planning for Logistics Cargo Environment Using LSTM Based Reinforcement Learning
- Open Access
Development of an In-Pipe Inspection Robot for Large-Diameter Water Pipes
This paper describes the development of an in-pipe inspection robot system designed for large-diameter water pipes. The robot is equipped with a Magnetic Flux Leakage (MFL) sensor module. The robot system is intended for pipes with diameters ranging from 900 mm to 1200 mm. The structure of the in-pipe inspection robot consists of the front and rear driving parts, with the inspection module located centrally. The robot is powered by 22 motors, including eight wheels with motors positioned at both the bottom and the top for propulsion. To ensure that the robot’s center aligns with that of the pipeline during operation, lifting units have been incorporated. The robot is equipped with cameras and LiDAR sensors at the front and rear to monitor the internal environment of the pipeline. Pipeline inspection is conducted using the MFL inspection modules, and the robot’s driving mechanism is designed to execute spiral maneuvers while maintaining contact with the pipeline surface during rotation. The in-pipe inspection robot is configured with wireless communication modules and batteries, allowing for wireless operation. Following its development, the inspection robot underwent driving experiments in actual pipelines to validate its performance. The field test bed used for these experiments is approximately 1 km in length. Results from the driving experiments on the field test bed confirmed the robot’s ability to navigate various curvatures and obstacles within the pipeline. It is posited that the use of the developed in-pipe inspection robot can reduce economic costs and enhance the safety of inspectors when examining aging pipes.
Open AccessDevelopment of an In-Pipe Inspection Robot for Large-Diameter Water Pipes
This paper describes the development of an in-pipe inspection robot system designed for large-diameter water pipes. The robot is equipped with a Magnetic Flux Leakage (MFL) sensor module. The robot system is intended for pipes with diameters ranging from 900 mm to 1200 mm. The structure of the in-pipe inspection robot consists of the front and rear driving parts, with the inspection module located centrally. The robot is powered by 22 motors, including eight wheels with motors positioned at both the bottom and the top for propulsion. To ensure that the robot’s center aligns with that of the pipeline during operation, lifting units have been incorporated. The robot is equipped with cameras and LiDAR sensors at the front and rear to monitor the internal environment of the pipeline. Pipeline inspection is conducted using the MFL inspection modules, and the robot’s driving mechanism is designed to execute spiral maneuvers while maintaining contact with the pipeline surface during rotation. The in-pipe inspection robot is configured with wireless communication modules and batteries, allowing for wireless operation. Following its development, the inspection robot underwent driving experiments in actual pipelines to validate its performance. The field test bed used for these experiments is approximately 1 km in length. Results from the driving experiments on the field test bed confirmed the robot’s ability to navigate various curvatures and obstacles within the pipeline. It is posited that the use of the developed in-pipe inspection robot can reduce economic costs and enhance the safety of inspectors when examining aging pipes.
- 1 March 2023
- Published by The Korea Robotics Society in Journal of Korea Robotics Society
- Vol. 18 (1) , 93-98
Development of Autonomous Driving Electric Vehicle for Logistics with a Robotic Arm
- 1 March 2023
- Published by The Korea Robotics Society in Journal of Korea Robotics Society
- Vol. 18 (1) , 93-98
Development of Autonomous Driving Electric Vehicle for Logistics with a Robotic Arm
- 1 December 2022
- Published by The Korea Robotics Society in Journal of Korea Robotics Society
- Vol. 17 (4) , 417-424
Development of a Single-Arm Robotic System for Unloading Boxes in Cargo Truck
- 1 December 2022
- Published by The Korea Robotics Society in Journal of Korea Robotics Society
- Vol. 17 (4) , 417-424
Development of a Single-Arm Robotic System for Unloading Boxes in Cargo Truck
- 30 June 2022
- Published by The Korean Society of Marine Environment and Safety in Journal of the Korean Society of Marine Environment & Safety
- Vol. 28 (4) , 567-576
A Comparative Study on Seafarers' Industrial Accident Compensation System
- 30 June 2022
- Published by The Korean Society of Marine Environment and Safety in Journal of the Korean Society of Marine Environment & Safety
- Vol. 28 (4) , 567-576
A Comparative Study on Seafarers' Industrial Accident Compensation System
- 30 July 2021
- Published by Korean Institute of Maritime Law in Maritime Law Review
- Vol. 33 (2) , 227-254
A Legislative Study for strengthening of Ship Cyber Security
In modern ships, advanced information and communication technology is applied to the ship navigation system, which brings economic efficiency, safety, and eco-friendliness to ship navigation, while increasing the risk to ship cybersecurity, ultimately providing the cause of cybersecurity accidents. Such ship cybersecurity incidents can disrupt the operating systems of ships and ports, which incurs enormous time and cost damage. Therefore, the purpose of this study is to prepare a basis for countermeasures through reorganization of related laws in order to strengthen ship cybersecurity. Recently, the International Maritime Organization and classifications of each country have developed and distributed guidelines on ship cyber security to strengthen ship cyber security, and enforced them to be enforced by law. However, there is currently no legal system related to ship cyber security in Korea, and as a result, systematic responses to ship cyber security incidents are insufficient. Therefore, in order to prepare the legal basis for ship cyber security, it is absolutely necessary to reorganize the amendment of the ship cyber security-related legislation. In this study, trends of the International Maritime Organization, classification, shipping industry, and major shipping countries were investigated to examine international responses to ship cybersecurity. Therefore, the results of this study can be utilized for the amendment of the ship cyber security-related laws in the future.
- 30 July 2021
- Published by Korean Institute of Maritime Law in Maritime Law Review
- Vol. 33 (2) , 227-254
A Legislative Study for strengthening of Ship Cyber Security
In modern ships, advanced information and communication technology is applied to the ship navigation system, which brings economic efficiency, safety, and eco-friendliness to ship navigation, while increasing the risk to ship cybersecurity, ultimately providing the cause of cybersecurity accidents. Such ship cybersecurity incidents can disrupt the operating systems of ships and ports, which incurs enormous time and cost damage. Therefore, the purpose of this study is to prepare a basis for countermeasures through reorganization of related laws in order to strengthen ship cybersecurity. Recently, the International Maritime Organization and classifications of each country have developed and distributed guidelines on ship cyber security to strengthen ship cyber security, and enforced them to be enforced by law. However, there is currently no legal system related to ship cyber security in Korea, and as a result, systematic responses to ship cyber security incidents are insufficient. Therefore, in order to prepare the legal basis for ship cyber security, it is absolutely necessary to reorganize the amendment of the ship cyber security-related legislation. In this study, trends of the International Maritime Organization, classification, shipping industry, and major shipping countries were investigated to examine international responses to ship cybersecurity. Therefore, the results of this study can be utilized for the amendment of the ship cyber security-related laws in the future.
- 3 April 2018
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Improvement of Tire Development Process Through Study of Tire Test Procedure and Vehicle Correlation
The tire is the vital element in vehicle dynamics, as its contact patch transmits all forces and moments to the ground (accelerating, braking, cornering, rolling).Over the recent decades tire development for passenger cars has been continuously improved and optimized in order to achieve a good overall vehicle performance in R&H that is in balance with all other tire performances (Wear, Durability, NVH, RR, Miles). This general development process has to be suitable for various vehicle types from regular passenger cars over eco-friendly hybrid or electric vehicles to high performance sport cars. The balance between Ride and Handling performance is further adjusted to local customer preferences that are usually distinguished by markets (US, EU, Asia).The tire development process, which is embedded in the overall vehicle development, is usually realized in a mutual collaboration between OEM and tire supplier.This process starts with the definition of tire performance targets, which are regularly checked and aligned with the overall vehicle performance during the development phase until the final joint evaluation that confirms the target achievement level at end of the development.There are two evaluation methods for tire performance:subjective evaluation of R&H performances from full vehicle experimentsobjective measurements from subcomponent and full vehicle experiments.In detail of tire evaluation, tire performances are historically evaluated during subjective test drives on R&H manoeuvers/tracks. The subjective evaluation could show a level of both good and bad, but it is not easy way to keep a consistency of evaluation and guide a clear direction of improvement depend on evaluator’s skill level and external effects such as road condition and weather condition.Objective measurements that represent realistic driving conditions could be used to make the development process more robust and support the initial target setting and guarantee coherence of evaluation throughout the entire process.This paper goal is to expand objective evaluation’s contribution into the tire development process. For it, the test of objective evaluation should be reliable to represent realistic driving conditions, repeatable for repetition test, robust for noise effect which would be happen during test. And tire characteristics values from extracting force and moment of tire have to get a good correlation with vehicle handling performances. Then objective evaluation could be used more active in the tire development process than before. This paper would like to introduce what kinds of activities are necessary to be reliable tire test measurement and how to prove the correlation between tire characteristics and vehicle performance.In the following studies four improvements of the objective measurements and their extracted key characteristics have been achieved. The first improvement focused on tire measurements, by applying realistic conditions for pretest and measurements of tire characteristics. The second dealt with the alignment of measurement procedures between OEMs and tire makers. In order to establish robust standards that can be evaluated in terms of measurement repeatability and deviation. The third improvement was a large study of correlation between tire characteristics and vehicle performances; using simulation. And the last improvement consisted of storing tire characteristics values in a centralized database in order to set robust tire targets, based on performance prediction and continuous quality control.The above mentioned improvements of test procedures and key characteristics, have increased pace and efficiency of the tire development process.
- 3 April 2018
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Improvement of Tire Development Process Through Study of Tire Test Procedure and Vehicle Correlation
The tire is the vital element in vehicle dynamics, as its contact patch transmits all forces and moments to the ground (accelerating, braking, cornering, rolling).Over the recent decades tire development for passenger cars has been continuously improved and optimized in order to achieve a good overall vehicle performance in R&H that is in balance with all other tire performances (Wear, Durability, NVH, RR, Miles). This general development process has to be suitable for various vehicle types from regular passenger cars over eco-friendly hybrid or electric vehicles to high performance sport cars. The balance between Ride and Handling performance is further adjusted to local customer preferences that are usually distinguished by markets (US, EU, Asia).The tire development process, which is embedded in the overall vehicle development, is usually realized in a mutual collaboration between OEM and tire supplier.This process starts with the definition of tire performance targets, which are regularly checked and aligned with the overall vehicle performance during the development phase until the final joint evaluation that confirms the target achievement level at end of the development.There are two evaluation methods for tire performance:subjective evaluation of R&H performances from full vehicle experimentsobjective measurements from subcomponent and full vehicle experiments.In detail of tire evaluation, tire performances are historically evaluated during subjective test drives on R&H manoeuvers/tracks. The subjective evaluation could show a level of both good and bad, but it is not easy way to keep a consistency of evaluation and guide a clear direction of improvement depend on evaluator’s skill level and external effects such as road condition and weather condition.Objective measurements that represent realistic driving conditions could be used to make the development process more robust and support the initial target setting and guarantee coherence of evaluation throughout the entire process.This paper goal is to expand objective evaluation’s contribution into the tire development process. For it, the test of objective evaluation should be reliable to represent realistic driving conditions, repeatable for repetition test, robust for noise effect which would be happen during test. And tire characteristics values from extracting force and moment of tire have to get a good correlation with vehicle handling performances. Then objective evaluation could be used more active in the tire development process than before. This paper would like to introduce what kinds of activities are necessary to be reliable tire test measurement and how to prove the correlation between tire characteristics and vehicle performance.In the following studies four improvements of the objective measurements and their extracted key characteristics have been achieved. The first improvement focused on tire measurements, by applying realistic conditions for pretest and measurements of tire characteristics. The second dealt with the alignment of measurement procedures between OEMs and tire makers. In order to establish robust standards that can be evaluated in terms of measurement repeatability and deviation. The third improvement was a large study of correlation between tire characteristics and vehicle performances; using simulation. And the last improvement consisted of storing tire characteristics values in a centralized database in order to set robust tire targets, based on performance prediction and continuous quality control.The above mentioned improvements of test procedures and key characteristics, have increased pace and efficiency of the tire development process.