CZChi Zhang

Chi Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chi Zhang has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Novel Design of Low-PAPR OFDM-DCSK Waveform With Riemann Matrix-Based G-SLM for ISAC

    by Cheng Peng, Yanhua Tan, Dingfei Ma, Zhaojie Yang, Chi Zhang, Yi Fang

    This letter introduces an orthogonal frequency division multiplexing differential chaos shift keying (OFDM-DCSK) waveform for communication-centric integrated sensing and communication (ISAC), which simultaneously enables reliable noncoherent communication and robust sensing capabilities. To further address the high peak-to-average power ratio (PAPR) issue of OFDM-based waveforms, a Riemann matrix–based group selected mapping (G-SLM) scheme is incorporated to reduce PAPR under ISAC sensing constraints. The proposed G-SLM achieves significant PAPR improvement compared with conventional SLM methods while requiring no side information at the receiver. Closed-form expressions are derived for the ambiguity function and bit error rate (BER) in the proposed systems with and without G-SLM. Both analytical and simulation results verify that the OFDM-DCSK waveform integrated with G-SLM maintains communication reliability and sensing accuracy compared to the conventional OFDM-DCSK waveform, while reducing the PAPR with only slight main lobes broadening and modest side lobes elevation. These features make the proposed scheme particularly suitable for ISAC applications in complex wireless environments under low and moderate mobility conditions.


  • Signal Compression for Wireless Communication and Sensing: A General Approach Utilizing Pretrained Wireless Foundation Models

    by Liwen Jing, Tingting Yang, Han Zhang, Yuxuan Shi, Chi Zhang, Bowen Zhang

    Artificial intelligence is expected to play a central role in enabling future 6 G networks. Developing foundation models that support a wide range of downstream tasks is critical for advancing 6 G standardization. This paper proposes a general framework for compressing wireless channel state information (CSI) using pretrained wireless foundation models. The foundation model is pre-trained using self-supervised learning with a masked reconstruction objective, achieving a normalized mean square error on the order of $10^{-3}$ during pretraining. The model is evaluated on a range of wireless communication and sensing tasks, including classification tasks where compressed CSI is directly used for prediction, and regression tasks that require full CSI reconstruction. For regression tasks such as massive MIMO CSI feedback, the pre-compressed output from the foundation model is used as an auxiliary input to the downstream compressor, effectively enhancing the reconstruction quality. Compared to the Type-I codebook with comparable number of feedback bits, our method improves SGCS by 16.22% and reduces NMSE by 93.24%. Additionally, it achieves comparable SGCS performance to the Type-II codebook while using only 29% of the feedback bits. Comparison with existing research further confirms the contribution of the foundation model's compressed output in improving CSI compression performance. For classification tasks such as WiFi-based human activity recognition and human identification, the compressed representations produced by the foundation model can be directly utilized without additional fine-tuning. These representations achieve over 97% accuracy, outperforming conventional AI-based methods even under higher compression ratios. These findings demonstrate that leveraging a pretrained wireless foundation model consistently enhances performance across both classification and regression tasks, underscoring its versatility and potential in wireless CSI processing.


  • Advanced Spatial Modulation-Aided Integrated Sensing and Backscatter Communication: System Design and Performance Analysis

    by Dingfei Ma, Junxiang Yang, Jia Zhan, Chi Zhang, Qingfeng Zhang, Yi Fang

    This paper proposes an innovative framework that integrates electromagnetic inverse scattering with improved quadrature spatial modulation (IQSM) to simultaneously accomplish sensing, identification, and backscatter communication. Specifically tailored for energy- and spectrum-efficient wireless operations in highly cluttered environments, the proposed system employs distinct load impedance modulation at the tags to effectively separate structural and antenna mode signatures. Structural mode signals are processed using inverse scattering combined with compressive sensing techniques, enabling precise localization of both tags and surrounding clutter. Concurrently, antenna mode signals are utilized for accurate tag identification. In addition, the antenna mode enables the acquisition of the reliable channel state information (CSI), facilitating the integration of IQSM schemes into the backscatter communication module. Furthermore, we present a theoretical analysis by deriving the bit error probability (BEP) for the proposed system. The proposed system is validated through a proof-of-concept experimental setup consisting of transmit and receive arrays, each configured as a 3×3 uniform linear antenna array (ULA). Both simulation and experimental results confirm that the inverse scattering-based approach achieves high-precision sensing and accurate identification of tags individually or in combination. Additionally, the integration of IQSM significantly enhances spectral efficiency (SE) and data throughput, compared with the state-of-the-art systems that do not incorporate spatial modulation (SM) techniques. These findings highlight the effectiveness and practical viability of the proposed integrated sensing and communication system for challenging clutter-rich scenarios.

  • Frequency-Diverse Integrated Sensing and Backscatter Communication System Utilizing High Scanning-Rate Slot Array Antenna With Inverse Scattering Approach

    by Dingfei Ma, Wentao Xu, Chi Zhang, Hongxin Zhou, Shanpu Shen, Qingfeng Zhang, Yi Fang

    In this paper, we propose an integrated sensing and backscatter communication system utilizing high scanning-rate slot array antennas (SAAs) in a frequency-diverse configuration, leveraging an inverse scattering approach. This system employs a frequency diversity scheme to facilitate rapid spatial data acquisition, significantly outperforming traditional mechanical and electronic scanning methods in terms of speed and cost-efficiency. The proposed integrated system achieves simultaneous localization, identification, and backscatter communication of tags within cluttered environments. Our approach analyzes backscatter process based on the structural and antenna modes of tags, as well as the presence of clutter scatterers. By modulating the tags between open-circuit and short-circuit states, we effectively extract the structural and antenna mode components. The structural mode component allows us to sense both the tags and the surrounding clutter scatterers, while the antenna mode component is used for precise tag identification by incorporating both inverse scattering and compressive sensing (CS) algorithms. During these processes, channel state information (CSI) is gathered through the antenna mode, enhancing the backscatter communication capability of the system. Additionally, the efficacy of backscatter communication is assessed using the bit error rate (BER) with the maximum ratio combining (MRC) technique. Simulations and experimental results demonstrate that our proposed system can accurately sense and identify tags amidst clutter scatterers while maintaining robust backscatter communication over a 40 MHz bandwidth within the 3.98-4.02 GHz range. These results highlight the significant advantages of employing the proposed frequency-diverse antennas and the inverse scattering approach in integrated backscatter communication and sensing applications.


  • A Phaseless Framework for Integrated Sensing and Backscatter Communication System Based on Inverse Scattering Technique

    by Dingfei Ma, Honxin Zhou, Junxiang Yang, Jia Zhan, Chi Zhang, Qingfeng Zhang, Yi Fang

    In this paper, we present a novel phaseless system that seamlessly integrates sensing and backscatter communication through inverse scattering techniques, enabling effective collaboration between the two functionalities. Specifically, backscatter communication enhances tag identification, while sensing facilitates reliable data transmission by enabling the acquisition of channel state information (CSI). The proposed system enables simultaneous localization, identification, and backscatter communication of tags in complex environments using the received signal strength indicator (RSSI), thereby eliminating the need for phase information. By dynamically modulating the load impedance of the tags, the system separates the RSSI components into structural and antenna modes. The structural mode RSSI, combined with inverse scattering and compressive sensing (CS) techniques, is employed to localize both tags and clutter scatterers, while the antenna mode RSSI ensures precise tag identification. Additionally, CSI is acquired during the localization and identification process, and the backscatter communication performance of the proposed system is analyzed in terms of bit error rate (BER) by employing the zero-forcing (ZF) technique. Simulation results demonstrate that the proposed phaseless integrated system can accurately localize and identify tags, both individually and collectively, while maintaining reliable data communication in challenging and cluttered environments. These findings highlight the potential of leveraging inverse scattering and phaseless techniques to advance IoT applications.


  • Compact Millimeter Wave Massive MIMO System Utilizing ESPAR

    by Chi Zhang, Shanpu Shen, Hongyu Li, Dingfei Ma, Zixiang Han, Jun Qian, Bruno Clerckx, Ross Murch

    In this work, we propose a compact millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) system utilizing electronically steerable parasitic array radiator (ESPAR). We analyze the system and channel models for the compact mmWave massive MIMO system using a beamspace formulation and demonstrate that we can optimize the spectral efficiency of the compact mmWave massive MIMO system by jointly adjusting the variable reactive loads in the ESPAR with a digital beamformer. We formulate the compact mmWave massive MIMO system optimization problem to maximize spectral efficiency and propose an unconstrained optimization based algorithm with an initialization method. The spectral and energy efficiencies of the compact mmWave massive MIMO system are evaluated in comparison to conventional mmWave massive MIMO systems of the same antenna size using full-digital, fully-connected hybrid, and partially-connected hybrid beamforming. The results show that the compact mmWave massive MIMO system provides higher spectral efficiency than partially-connected hybrid beamforming. On top of this, it can provide higher energy efficiencies of around 3.21, 2.88, and 1.22 times compared to full-digital, fully-connected hybrid, and partially-connected hybrid beamforming but with lower hardware complexity and lower cost. Therefore, compact mmWave massive MIMO systems are a promising and effective alternative to conventional massive MIMO systems in millimeter wave (mmWave) communications.


  • Integrated Sensing, Identification, and Backscatter Communication System Utilizing Inverse Scattering Approach

    by Dingfei Ma, Shanpu Shen, Hongxin Zhou, Chi Zhang, Qingfeng Zhang, Ross Murch

    This paper presents a novel integrated sensing, identification, and backscatter communication system that incorporates techniques based on inverse scattering. The proposed system enables simultaneous localization, identification and backscatter communication of tags in cluttered environments. We formulate the backscatter in terms of the tag’s structural and antenna modes and clutter scatterers. By modulating the tags with opencircuit and short-circuit states, we extract the structural and antenna mode components separately. Utilizing the structural mode component, we sense both the tag and clutter scatterers and perform tag identification using the antenna mode component. To conduct sensing and identification both inverse scattering and compressive sensing (CS) algorithms are employed. This enables recovery of high-dimensional imaging information but also significantly reduces the number of transceivers required. In addition, channel state information (CSI) can be acquired by utilizing the antenna mode during the sensing and identification stage, and the backscatter communication performance is evaluated using the bit error rate (BER) based on the maximum ratio combining (MRC) technique. A proof-of-principle illustrative system is developed based on one transmit and one receive array equipped with 3×3 uniform linear antennas (ULA) configuration. Results of sensing, identification and backscatter communication are provided to verify that the proposed system with inverse scattering can accurately locate and identify the tags separately or in combination, while maintaining data communications in challenging cluttered environments.


  • Analog Beamforming Using ESPAR for Single-RF Precoding Systems

    by Chi Zhang, Shanpu Shen, Zixiang Han, Ross Murch

    A novel analog beamforming technique that utilizes single radio frequency (single-RF) electronically steerable parasitic array radiator (ESPAR) antennas is proposed. The ESPAR beamforming techniques are aimed at precoding in multiple antenna wireless communication systems using the single or hybrid RF approach. One advantage of ESPAR analog beamforming compared to conventional analog beamforming using phase shifters is that arbitrary patterns can be straightforwardly formed. Therefore, ESPAR analog beamforming can provide performance almost identical to digital beamforming. More importantly, ESPAR analog beamforming does not require phase shifters and power splitters, overcoming implementation challenges of conventional analog beamforming. It also has a more compact size compared to conventional beamforming using uniform antenna arrays. We analyze and optimize ESPAR analog beamforming and propose a channel approach based on beamspace pilot transmission to acquire channel state information (CSI). In addition, we propose limited feedback ESPAR analog beamforming based on a beamforming selection strategy. Simulation results for average gain show that ESPAR analog beamforming has almost identical performance to digital beamforming and better performance than analog beamforming using phase shifters. Energy efficiency simulations show that the technique has the highest efficiency among all the beamforming techniques. Therefore, ESPAR analog beamforming has near optimal performance, high energy efficiency, low circuit complexity, low cost, compact size and can be an effective alternative to conventional analog beamforming.