Huan He
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Huan He has a total of 90 co-authors. Here are the top co-authors by number of shared publications:
Guoping Chen
State Key Laboratory of Mechanic and Control for Aerospace Structures, Nanjing University of Aeronautics and Astronautics, Nanjing, China
13 shared publicationsTao Wang
8 shared publicationsWeiting Chen
7 shared publicationsHanbo Shao
School of Mechanical and Electronic Engineering, Nanjing Forestry University, Nanjing, China
5 shared publicationsXing Tan
State Key Laboratory of Mechanics and Control for Aerospace Structures, Nanjing University of Aeronautics and Astronautics, Nanjing, China
5 shared publications- Cheng He
State Key Laboratory of Mechanic and Control for Aerospace Structures, Nanjing University of Aeronautics and Astronautics 1 , Nanjing 210016
4 shared publications
Latest Publications
- Open Access
- 1 August 2026
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 160 (2) , 1096-1110
Surrogate-guided parametric inverse design of periodic labyrinthine ventilated acoustic metamaterials
Labyrinthine ventilated acoustic metamaterials (LVAMs) enable simultaneous sound insulation and air ventilation but remain difficult to design due to their geometric complexity. This study develops a surrogate-guided inverse design framework for LVAMs with target phononic bandgaps. A parametric LVAM model is constructed, and a large finite element dataset is generated to link geometry with band structure. The framework integrates a finite-element–trained forward predictor with an inverse generator, allowing feasible designs to be directly generated from target bandgaps without repeated simulations during inverse training. Numerical and experimental results show high design accuracy, with R2=0.9975 and 0.9908 for the lower and upper bandgap bounds, respectively, surpassing a baseline inverse model. The results demonstrate that the proposed framework provides an efficient surrogate-guided approach for the parametric inverse design of complex acoustic metamaterials.
- 1 August 2026
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 160 (2) , 1096-1110
Open AccessSurrogate-guided parametric inverse design of periodic labyrinthine ventilated acoustic metamaterials
Labyrinthine ventilated acoustic metamaterials (LVAMs) enable simultaneous sound insulation and air ventilation but remain difficult to design due to their geometric complexity. This study develops a surrogate-guided inverse design framework for LVAMs with target phononic bandgaps. A parametric LVAM model is constructed, and a large finite element dataset is generated to link geometry with band structure. The framework integrates a finite-element–trained forward predictor with an inverse generator, allowing feasible designs to be directly generated from target bandgaps without repeated simulations during inverse training. Numerical and experimental results show high design accuracy, with R2=0.9975 and 0.9908 for the lower and upper bandgap bounds, respectively, surpassing a baseline inverse model. The results demonstrate that the proposed framework provides an efficient surrogate-guided approach for the parametric inverse design of complex acoustic metamaterials.
- 20 July 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (19) , 17394-17406
Effects of Temperature and Fiber Orientation on the Tensile and Joining Behavior of Short Carbon Fiber Reinforced PA6T Composites
Short carbon fiber reinforced polyamide 6 T (SCF/PA6T) composites possess superior mechanical performance and molding efficiency, showing great application potential in aerospace load‐bearing components. This work explored the temperature and fiber orientation effects on tensile behavior, and the interactive effects of fiber orientation and edge distance on the failure modes of bolted joints. The results indicate obvious temperature sensitivity and anisotropy in tensile performance. Matrix softening at elevated temperatures markedly degrades tensile strength and elastic modulus, while 0° specimens retain superior mechanical properties through axial fiber loading. Interfacial debonding dominates the fracture of 0° specimens, whereas 90° specimens fail mainly through matrix rupture. For single‐lap bolted joints, edge distance and fiber orientation jointly determine failure modes. Increasing edge distance weakens the anisotropic difference in joint performance, and the transverse fiber arrangement in 90° specimens effectively suppresses crack initiation and propagation near the hole edge, whereas 0° specimens are susceptible to hole‐edge cracking under constrained edge distances. This study reveals the multi‐factor coupling mechanism of mechanical and joining behavior, and provides experimental support for the structural joint design and engineering application of SCF/PA6T composites.
- 20 July 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (19) , 17394-17406
Effects of Temperature and Fiber Orientation on the Tensile and Joining Behavior of Short Carbon Fiber Reinforced PA6T Composites
Short carbon fiber reinforced polyamide 6 T (SCF/PA6T) composites possess superior mechanical performance and molding efficiency, showing great application potential in aerospace load‐bearing components. This work explored the temperature and fiber orientation effects on tensile behavior, and the interactive effects of fiber orientation and edge distance on the failure modes of bolted joints. The results indicate obvious temperature sensitivity and anisotropy in tensile performance. Matrix softening at elevated temperatures markedly degrades tensile strength and elastic modulus, while 0° specimens retain superior mechanical properties through axial fiber loading. Interfacial debonding dominates the fracture of 0° specimens, whereas 90° specimens fail mainly through matrix rupture. For single‐lap bolted joints, edge distance and fiber orientation jointly determine failure modes. Increasing edge distance weakens the anisotropic difference in joint performance, and the transverse fiber arrangement in 90° specimens effectively suppresses crack initiation and propagation near the hole edge, whereas 0° specimens are susceptible to hole‐edge cracking under constrained edge distances. This study reveals the multi‐factor coupling mechanism of mechanical and joining behavior, and provides experimental support for the structural joint design and engineering application of SCF/PA6T composites.
- Open Access
- 25 April 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (9) , 4210
Design and Optimization of Expansion-Tube Energy-Absorbing Structures with Gradient Stiffness
Conventional uniform-thickness expansion-tube energy-absorbing structures suffer from excessively high initial peak crushing forces (IPCFs) and sub-optimal energy absorption efficiency. Inspired by the gradient stiffness characteristics of the inter node-to-node structure in Buddha’s Belly Bamboo, this study proposed an expansion-tube energy-absorbing structure design featuring a gradient stiffness. An LS-DYNA finite element simulation model was first established, validated through experimental results, and subsequently subjected to multi-objective optimization. The analysis results demonstrate that the stiffness-gradient expansion-type energy-absorbing structure designed in this study not only effectively reduces the IPCF during energy absorption but also further enhances its buffering and specific energy absorption (SEA).
- 25 April 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (9) , 4210
Open AccessDesign and Optimization of Expansion-Tube Energy-Absorbing Structures with Gradient Stiffness
Conventional uniform-thickness expansion-tube energy-absorbing structures suffer from excessively high initial peak crushing forces (IPCFs) and sub-optimal energy absorption efficiency. Inspired by the gradient stiffness characteristics of the inter node-to-node structure in Buddha’s Belly Bamboo, this study proposed an expansion-tube energy-absorbing structure design featuring a gradient stiffness. An LS-DYNA finite element simulation model was first established, validated through experimental results, and subsequently subjected to multi-objective optimization. The analysis results demonstrate that the stiffness-gradient expansion-type energy-absorbing structure designed in this study not only effectively reduces the IPCF during energy absorption but also further enhances its buffering and specific energy absorption (SEA).
- 23 April 2026
- Published by Elsevier in Engineering Failure Analysis
- Vol. 193
Damage-equivalent stress amplitude PDF model for random vibration fatigue life prediction over a wide temperature range
- 23 April 2026
- Published by Elsevier in Engineering Failure Analysis
- Vol. 193
Damage-equivalent stress amplitude PDF model for random vibration fatigue life prediction over a wide temperature range
- 4 April 2026
- Published by Elsevier in Mechanical Systems and Signal Processing
- Vol. 251
A stability-switch analysis framework for virtual shaker voltage-based fixed frequency continuation test
- 4 April 2026
- Published by Elsevier in Mechanical Systems and Signal Processing
- Vol. 251
A stability-switch analysis framework for virtual shaker voltage-based fixed frequency continuation test
- 28 January 2026
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 313
High-temperature fatigue curve estimation and random vibration fatigue failure
- 28 January 2026
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 313
High-temperature fatigue curve estimation and random vibration fatigue failure
- Open Access
- 1 January 2026
- Published by AIP Publishing in AIP Advances
- Vol. 16 (1)
Reducing initial peak force through chamfered triggers: A study on thin-walled tubular structures for energy absorption and crash protection
Thin-walled tubular structures play a significant role in energy absorption owing to their lightweight nature, low cost, and high specific energy absorption, which are widely applied in crash resistance in aerospace and vehicle fields. However, the structures always denote a high initial peak force; thus, triggers have attracted tremendous attention. In this study, a chamfer trigger has been presented to decrease the peak crushing force, and a thin-walled structure has been designed to absorb energy. First, the proposed trigger has been verified by finite element analysis. Then, a square conical thin-walled multi-cell structure is designed and analyzed by experimental tests and finite element analysis. Moreover, the parametric analysis and multi-objective optimization design have been applied to figure out the influences of structural parameters on the energy-absorbing performance. Finally, a horizontal crash test has been carried out to verify the availability of the designed structure. The chamfer trigger proposed can be used in thin-walled tubular structures to decrease the initial peak force, and the designed structure can be utilized in high-speed helicopter and automotive fields.
- 1 January 2026
- Published by AIP Publishing in AIP Advances
- Vol. 16 (1)
Open AccessReducing initial peak force through chamfered triggers: A study on thin-walled tubular structures for energy absorption and crash protection
Thin-walled tubular structures play a significant role in energy absorption owing to their lightweight nature, low cost, and high specific energy absorption, which are widely applied in crash resistance in aerospace and vehicle fields. However, the structures always denote a high initial peak force; thus, triggers have attracted tremendous attention. In this study, a chamfer trigger has been presented to decrease the peak crushing force, and a thin-walled structure has been designed to absorb energy. First, the proposed trigger has been verified by finite element analysis. Then, a square conical thin-walled multi-cell structure is designed and analyzed by experimental tests and finite element analysis. Moreover, the parametric analysis and multi-objective optimization design have been applied to figure out the influences of structural parameters on the energy-absorbing performance. Finally, a horizontal crash test has been carried out to verify the availability of the designed structure. The chamfer trigger proposed can be used in thin-walled tubular structures to decrease the initial peak force, and the designed structure can be utilized in high-speed helicopter and automotive fields.
- 5 May 2025
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 113 (15) , 19241-19257
The influence of quasi-zero stiffness system parameters on response stability under quasi-periodic excitation
- 5 May 2025
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 113 (15) , 19241-19257
The influence of quasi-zero stiffness system parameters on response stability under quasi-periodic excitation
- 25 March 2025
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Mechanical Engineering
- Vol. 49 (3) , 1531-1545
Design and Optimization of a Snap-Fit Structure for Energy Absorbing
- 25 March 2025
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Mechanical Engineering
- Vol. 49 (3) , 1531-1545
Design and Optimization of a Snap-Fit Structure for Energy Absorbing