TWTianlei Wang

Tianlei Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Tianlei Wang has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Design and Analysis of an Anti-Collision Spacer Ring and Installation Robot for Overhead Transmission Lines

    by Tianlei Wang, Huize Lian, Tianhui Cheng

    Overhead transmission lines often suffer from mutual collisions between adjacent conductors in windy weather, which can cause power failures to villages. To solve this problem, this paper introduces a spacer ring and a teleoperated robot for the installation and retrieval of the ring. The spacer ring and robot address the installation challenges of the anti-collision devices and enhance transmission line maintenance. Fixed by the locking mechanism, the spacer ring can isolate adjacent conductors to avoid collisions. The structure and working principle of the spacer ring and installation robot are introduced. Static analysis and finite element analysis (FEA) are conducted to analyze the output force of the locking mechanism, which is then validated through experiments. Experimental results show that the locking mechanism can generate a strong output force of up to 2000 N with about 6.0 N·m of input torque, providing a secure installation for the spacer ring. Diverse installation tests have validated the robot’s capability for live-line operations on transmission lines. Field tests indicate that the installation robot can travel at 0.3 m/s on a 15° slope and successfully install the spacer rings.

  • Open Access

    Optimal Design of Anti-Collision Spacer Ring for Power Transmission Lines

    by Tianlei Wang, Tianhui Cheng, Huize Lian

    Electrical power transmission relies heavily on power transmission lines. The swinging of the lines during windy weather can cause conductor collision between adjacent lines, which can result in severe electrical accidents. To solve this problem, this paper proposes an anti-collision spacer ring and its structure optimization method. Topology optimization, as a structural optimization method, is used to design the spacer ring to achieve maximum stiffness and minimum mass. The model is redesigned based on the optimized results, and its performance is subsequently assessed through static analysis and electrostatic field analysis. The results before and after optimization show that the maximum equivalent stress on the spacer ring is reduced by 34.4% and the mass is decreased by 10.5%. It realizes the lightweight design of the spacer ring, and provides theoretical basis and technical support for the structural design of the spacer ring.

  • Open Access

    Visual-Aided Shared Control of Semi-Autonomous Underwater Vehicle for Efficient Underwater Grasping

    by Tianlei Wang, Fei Ding, Zhenxing Sun

    Human intelligence has the advantage for making high-level decisions in the remote control of underwater vehicles, while autonomous control is superior for accurate and fast close-range pose adjustment. Combining the advantages of both remote and autonomous control, this paper proposes a visual-aided shared-control method for a semi-autonomous underwater vehicle (sAUV) to conduct flexible, efficient and stable underwater grasping. The proposed method utilizes an arbitration mechanism to assign the authority weights of the human command and the automatic controller according to the attraction field (AF) generated by the target objects. The AF intensity is adjusted by understanding the human intention, and the remote-operation command is fused with a visual servo controller. The shared controller is designed based on the kinematic and dynamic models, and model parameter uncertainties are also addressed. Efficient and stable control performance is validated by both simulation and experiment. Faster and accurate dynamic positioning in front of the target object is achieved using the shared-control method. Compared to the pure remote operation mode, the shared-control mode significantly reduces the average time consumption on grasping tasks for both skilled and unskilled operators.


  • Open Access

    Two-Step Adaptive Control for Planar Type Docking of Autonomous Underwater Vehicle

    by Tianlei Wang, Zhenxing Sun, Yun Ke, Chaochao Li, Jiwei Hu

    Planar type docking enables a convenient underwater energy supply for irregularly shaped autonomous underwater vehicles (AUVs), but the corresponding control method is still challenging. Conventional control methods for torpedo-shaped AUVs are not suitable for planar type docking due to the significant differences in system structures and motion characteristics. This paper proposes a two-step adaptive control method to solve the planar type docking problem. The method makes a seamless combination of horizontal dynamic positioning and visual servo docking considering ocean current disturbance. The current disturbance is estimated and canceled in the pre-docking step using a current observer, and the positioning error is further compensated for by the vertical visual servo technique in the docking step. Reduced order dynamic models are distinctively established for different docking steps according to the motion characteristics, based on which the dynamic controllers are designed considering the model parameter uncertainties. Simulation is conducted with an initial distance of 10 m in the horizontal direction and 3 m in depth. Stable and accurate dynamic positioning under up to 0.4 m/s of current disturbances with different directions is validated. A 0.5 m lateral positioning error is successfully compensated for by the visual servo docking step. The proposed control method provides a valuable reference for similar types of docking application.


  • Design and Gesture Optimization of a Soft-Rigid Robotic Hand for Adaptive Grasping

    by Tianlei Wang, Wenhua Jiao, Zhenxing Sun, Xinghua Zhang

    Soft robotic hands are inherently safer and more compliant in robot–environment interaction than rigid manipulators, but their flexibility and versatility still need improving. In this article, a gesture adaptive soft-rigid robotic hand is proposed. The robotic hand has three pneumatic two-segment fingers. Each finger segment is driven independently for flexible gesture adjustment to match up with different object shapes. The palm is constructed by a rigid skeleton driven by a soft pneumatic spring. It provides a firm support, large workspace, and independent force control for the fingers. Geometry model of the robotic hand is established, based on which a grasping gesture optimization algorithm is adopted. The fingers achieve optimal contact with objects by performing maximal curving similarity with the object outlines. Experiment shows that the soft-rigid robotic hand provides adaptive and reliable grasping for objects of different sizes, shapes, and materials with optimized gestures.


  • Sea anemone-like zinc-cobalt oxysulfides grown on Ni foam as a battery-type electrode with admirable performance

    by Yuqing Kuai, Meitang Liu, Tianlei Wang, Yu Fu, Hongwen Ma, Qun Jiang, Chao Guan, Kunran Hu