Chunlong Li
Research Subjects
Chunlong Li has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Dengfeng Ju
Electric Power Intelligent Sensing Technology and Application State Grid Corporation Joint Laboratory, State Grid Smart Grid Research Institute Co., Ltd., Beijing 102209, China
2 shared publications - Hongjing Liu
State Grid Beijing Electric Power Research Institute, Beijing 100075, China
2 shared publications - Kewen Liu
State Grid Beijing Electric Power Company, Beijing 100051, China
2 shared publications - Dengfeng Ju
Institute of Electric Power Sensing Technology, State Grid Smart Grid Research Institute Co., LTD., Beijing 102209, China
1 shared publication - Hongjing Liu
Electric Power Research Institute, State Grid Beijing Electric Power Company, Beijing 100192, China
1 shared publication - Hui Huang
State Grid Smart Grid Research Institute Co., Ltd., Beijing 102209, China
1 shared publication
Latest Publications
- Open Access
A Review of Electromagnetic Wind Energy Harvesters Based on Flow-Induced Vibrations
The urgent demand of wireless sensor nodes for long-life and maintenance-free miniature electrical sources with output power ranging from microwatts to milliwatts has accelerated the development of energy harvesting technologies. For the abundant and renewable nature of wind in environments, flow-induced vibration (FIV)-based wind energy harvesting has emerged as a promising approach. Electromagnetic FIV wind energy harvesters (WEHs) show great potential for realistic applications due to their excellent durability and stability. However, electromagnetic WEHs remain less studied than piezoelectric WEHs, with few dedicated review articles available. This review analyzes the working principle, device structure, and performance characteristics of electromagnetic WEHs based on vortex-induced vibration, galloping, flutter, wake galloping vibration, and Helmholtz resonator. The methods to improve the output power, broaden the operational wind speed range, broaden the operational wind direction range, and enhance the durability are then discussed, providing some suggestions for the development of high-performance electromagnetic FIV WEHs.
Open AccessA Review of Electromagnetic Wind Energy Harvesters Based on Flow-Induced Vibrations
The urgent demand of wireless sensor nodes for long-life and maintenance-free miniature electrical sources with output power ranging from microwatts to milliwatts has accelerated the development of energy harvesting technologies. For the abundant and renewable nature of wind in environments, flow-induced vibration (FIV)-based wind energy harvesting has emerged as a promising approach. Electromagnetic FIV wind energy harvesters (WEHs) show great potential for realistic applications due to their excellent durability and stability. However, electromagnetic WEHs remain less studied than piezoelectric WEHs, with few dedicated review articles available. This review analyzes the working principle, device structure, and performance characteristics of electromagnetic WEHs based on vortex-induced vibration, galloping, flutter, wake galloping vibration, and Helmholtz resonator. The methods to improve the output power, broaden the operational wind speed range, broaden the operational wind direction range, and enhance the durability are then discussed, providing some suggestions for the development of high-performance electromagnetic FIV WEHs.
- Open Access
- 18 October 2023
- Published by MDPI AG in Preprints.org
The Influence of Ferroelectric Dipoles on the Output Performance of Triboelectric Nanogenerator
A method based on ferroelectric dipole to enhance surface charge density of triboelectric generator was proposed. By using the ferroelectric properties of polyvinylidene fluoride (PVDF), a positive charge trap was formed in the triboelectric layer to enhance the electric generating performance of the triboelectric material, so as to improve the surface charge density of the triboelectric nanogenerator. The PVDF film was fabricated by casting and uniaxial tensile process, and integrated into the triboelectric nanogenerator with vertical separation structure. The influences of the embedding direction, thickness and polarization intensity of the PVDF film on the output of the triboelectric nanogenerator were systematically studied. The results showed that the embedded PVDF piezoelectric film with a thickness of 100 µm and a maximum polarization electric field of 90 MV/m increased the peak power of the triboelectric nanogenerator by 2.6 times. This work has provided a new insight into regulating the properties of the triboelectric nanogenerator.
- 18 October 2023
- Published by MDPI AG in Preprints.org
Open AccessThe Influence of Ferroelectric Dipoles on the Output Performance of Triboelectric Nanogenerator
A method based on ferroelectric dipole to enhance surface charge density of triboelectric generator was proposed. By using the ferroelectric properties of polyvinylidene fluoride (PVDF), a positive charge trap was formed in the triboelectric layer to enhance the electric generating performance of the triboelectric material, so as to improve the surface charge density of the triboelectric nanogenerator. The PVDF film was fabricated by casting and uniaxial tensile process, and integrated into the triboelectric nanogenerator with vertical separation structure. The influences of the embedding direction, thickness and polarization intensity of the PVDF film on the output of the triboelectric nanogenerator were systematically studied. The results showed that the embedded PVDF piezoelectric film with a thickness of 100 µm and a maximum polarization electric field of 90 MV/m increased the peak power of the triboelectric nanogenerator by 2.6 times. This work has provided a new insight into regulating the properties of the triboelectric nanogenerator.
- 23 March 2023
- Published by Springer Nature
- p. 496-505
A Switchable Modular AC~DC Buck-Boost Converter for the Wide Input Range in Energy Harvesting
- 23 March 2023
- Published by Springer Nature
- p. 496-505
A Switchable Modular AC~DC Buck-Boost Converter for the Wide Input Range in Energy Harvesting
- Open Access
Frequency Modulation Approach for High Power Density 100 Hz Piezoelectric Vibration Energy Harvester
Piezoelectric vibration energy harvester (PVEH) is a promising device for sustainable power supply of wireless sensor nodes (WSNs). PVEH is resonant and generates power under constant frequency vibration excitation of mechanical equipment. However, it cannot output high power through off-resonance if it has frequency offset in manufacturing, assembly and use. To address this issue, this paper designs and optimizes a PVEH to harvest power specifically from grid transformer vibration at 100 Hz with high power density of 5.28 μWmm−3g−2. Some resonant frequency modulation methods of PVEH are discussed by theoretical analysis and experiment, such as load impedance, additional mass, glue filling, axial and transverse magnetic force frequency modulation. Finally, efficient energy harvesting of 6.1 V output in 0.0226 g acceleration is tested in grid transformer reactor field application. This research has practical value for the design and optimization process of tunable PVEH for a specific vibration source.
Open AccessFrequency Modulation Approach for High Power Density 100 Hz Piezoelectric Vibration Energy Harvester
Piezoelectric vibration energy harvester (PVEH) is a promising device for sustainable power supply of wireless sensor nodes (WSNs). PVEH is resonant and generates power under constant frequency vibration excitation of mechanical equipment. However, it cannot output high power through off-resonance if it has frequency offset in manufacturing, assembly and use. To address this issue, this paper designs and optimizes a PVEH to harvest power specifically from grid transformer vibration at 100 Hz with high power density of 5.28 μWmm−3g−2. Some resonant frequency modulation methods of PVEH are discussed by theoretical analysis and experiment, such as load impedance, additional mass, glue filling, axial and transverse magnetic force frequency modulation. Finally, efficient energy harvesting of 6.1 V output in 0.0226 g acceleration is tested in grid transformer reactor field application. This research has practical value for the design and optimization process of tunable PVEH for a specific vibration source.