Chao Zhang

Chao Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chao Zhang has a total of 49 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Local wavenumber based damage imaging for C/SiC composites using adaptive selection for frequency and mode of guided wave

    by Jinxin Chen, Chao Zhang, Keji Pang, Jinhao Qiu, Xukun Yang, Qiang Qu

    1 C/SiC composites have received more and more attention for their high stiffness, low density, and excellent heat resistance [1,2]. These properties make C/SiC highly suitable for demanding enviro...

  • Open Access

    Identification of surface defects in thermal protection system under aerodynamic heating

    by Tingting Wu, Chao Zhang, Jinhao Qiu

    The thermal protection system (TPS) is vital to hypersonic flight safety. To monitor possible surface impact defects for TPS, a robust and efficient approach for surface defect identification is proposed in this paper. Surface aerodynamic heating distribution caused by the defect is considered, which is complex during actual flights. First, the aerodynamic heating distribution is investigated, and the influence of different defect sizes on the heating distribution is analyzed. Next, the Levenberg‑Marquardt (LM) algorithm is employed to identify surface defects using temperature measurements acquired from the accessible surface. To improve computational efficiency, an approximate model is established for solving the direct problems during the identification process. Finally, numerical examples are provided to verify the effectiveness and robustness of the present method.

  • Enhancing predictive performance of artificial neural network modelling composite stiffness degradation with virtual samples

    by Chongcong Tao, Yuxiang Huang, Yiyue Ma, Chao Zhang, Hongli Ji, Jinhao Qiu

    This paper proposes a methodology for generating virtual samples of stiffness degradation of composite laminates to facilitate the training of artificial neural network (ANN)-based predictive models. Considering the impact of matrix cracks, delamination, and fiber fracture on the stiffness of laminated panels, a finite element model driven by the physical mechanism of fatigue damage is established for generating virtual samples of fatigue evolution. The stiffness and evolution of virtual samples for [0/90 3 /0/90 3 ] S glass fiber reinforced polymer (GFRP) laminates are obtained. By employing the fatigue evolution prediction method based on β -variational autoencoder ( β -VAE) and neural ordinary differential equation networks (Neural ODE), the proposed approach effectively learns the underlying mechanisms in fatigue evolution data and shows good correlation to experimental observation. The results indicate that physics-driven virtual sample generation significantly enhances the predictive accuracy and robustness of neural network models, broadening their practical applicability.


  • Open Access

    Research on Active Interference Technology Based on Piezoelectric Flexible Structure

    by Chaoyan Wang, Xiaodong Zhou, Chao Zhang, Hongli Ji, Jinhao Qiu

    To address the issue of voice leakage during the rapid deployment of meeting rooms, a piezoelectric flexible interference structure (PFIS) for active sound masking is developed in this paper. The PFIS uses rubber as the base, allowing it to bend or fold, offering good flexibility. The PFIS generates vibration through direct contact with the target object, without the need for adhesives or installation, fulfilling the need for rapid deployment. The experiment studied the driving of PFIS under three types of interference signals, analyzing the interference performance of PFIS by combining the vibration response of the surface of the table. The results show that the vibration response generated by PFIS on the surface of the table is significantly greater than when only a human voice is present. When a 3.5 kg weight is added to the surface of PFIS, its vibration performance increases by 5.6 times. Furthermore, increasing the voltage enhances the vibration interference effect of the PFIS across the entire frequency range; after adding weight, the vibration interference performance of the PFIS is significantly improved for frequencies above 2500 Hz. It has been verified that PFIS has strong vibration interference performance, effectively masking the vibrations of objects under human voice, providing a new technical solution for information security protection in sensitive areas.

  • High-speed Z-shaped Laser Point Scanning for Thermographic Detection of CFRP Defects

    by Shuaishuai Gao, Chao Zhang, Chenghao Yang, Ziwen Chen, Jinhao Qiu

  • A Stiffness Degradation Model for FRP Laminates Under Biaxial Fatigue Loading

    by Zelin Zha, Chao Zhang, Fuqiang Wu, Chongcong Tao, Jinhao Qiu, Weixing Yao

    A stiffness degradation model for fiber‐reinforced polymer (FRP) laminates under biaxial fatigue loading is presented in this paper. The degradation of biaxial stiffness in the FRP laminate due to matrix cracking is computed using a mesoscopic matrix crack damage model, and these results constitute the “Damage domain.” Subsequently, a new stiffness degradation model, termed the “Damage searching algorithm,” is applied within the “Damage domain” to forecast biaxial stiffness degradation in tandem with the damage evolution process. The model's validity is confirmed through a comparison of predictions with the combined tension‐torsion fatigue test results of tube specimens. The findings demonstrate that the predicted axial and torsional stiffness degradation align well with experimental results. Furthermore, the projected matrix crack density evolution corresponds closely to the observation in the experiment, further affirming the effectiveness and rationality of the proposed model.


  • Open Access

    Research on TPS damage identification method after thermal vibration cycles

    by Nanjing University of Aeronautics and Astronautics (NUAA), Haodong Zhong, Chao Zhang, Jinhao Qiu, Chongcong Tao, Hongli Ji, HIWING Technology Academy, Yupeng Zhang

    Thermal Protection Structure (TPS) plays an important role in reusable vehicles, ensuring the safety of internal structures and systems. Structural Health Monitoring (SHM) based on guided wave is a widely used method for structural damage diagnosis, where guided waves are analyzed to evaluate the structural state through wave excitation and reception by a sparse sensor array. However, the impact of thermal vibration cycles on structures can bring changes in the guided wave signals, leading to misjudgments in the monitoring results. In this study, thermal vibration cycle experiments are carried out to examine the impact of thermal vibration cycles on guided waves. The Multiscale Fuzzy Entropy (MFE) method is employed for feature extraction and Mahalanobis distance is used to detect outliers in the MFE. Experimental results on the TPS show that MFE effectively extracts damage-sensitive features, and Mahalanobis distance accurately distinguishes between healthy and damaged features.

  • Open Access

    The Application of Negative Poisson’s Ratio Metamaterials in the Optimization of a Variable Area Wing

    by Haifeng Wang, Chao Zhang, Chen Wang, Jinhao Qiu

    Mechanical metamaterials, especially the cells with a negative Poisson’s ratio (NPR), have received much attention since they offer more deformability potential in morphing wings. This paper proposes a strategy for regulating the deformation of metamaterial cells based on the deformation form of the wing planform. The deformation of the wing shape was achieved through this strategy, with the main control factor of NPR. In light of the strategy, taking bi-directional re-entrant anti-tetrachiral (BRATC) metamaterial cells with NPR as an example, a scheme for BRATC metamaterial cells to regulate NPR is proposed. Driven by the same increase in wingspan (Δspan = 5%), the wing models, which are constructed based on the BRATC metamaterial cells with NPR characteristics at the different chord length increment at wing root (Δchord = 20%, 25%, and 30%), achieved an acceptable object-contour shape error (K = 1.29%, 1.40%, and 2.10%) with corresponding relative area increases (Ar = 15.5%, 18.13%, and 20.75%). Finally, the feasibility of the method is verified by experimentally measuring the deformation of the wing model.


  • Design of trailing edge flap based on MFC and prediction of deformation and aerodynamic performance using BP neural network

    by Yulong Niu, Hongli Ji, Chongcong Tao, Chao Zhang, Yipeng Wu, Jinhao Qiu

    In terms of vibration and noise reduction for helicopter, Active Control Flap (ACF) rotor technology, leveraging smart materials, stands out as a promising and advantageous approach. This paper focuses on the design, modeling, and simulation of a novel structure integrated with trailing-edge flap and composite rotor blade driven by Macro Fiber Composite (MFC) actuators. A 3D model is employed to simulate the deformation response of the flap under different driving voltage levels. The results were validated by experimental data. Additionally, Fluid-Structure Interaction (FSI) analysis is applied to explore the deflections of the trailing-edge flap under various flight conditions and its corresponding aerodynamic characteristics. The findings reveal that the designed trailing-edge flap significantly influences the aerodynamic lift and pitch moment of the airfoil at operational speed and angle of attack of the helicopter blade. Finally, a Back Propagation (BP) Neural Network is introduced to establish a fast predictive model for the intricate nonlinear response characteristics of the ACF rotor. The network is trained and tested with appropriately chosen sample data, demonstrating high prediction accuracy and reliability. This model serves as a theoretical reference for subsequent application of ACF technology in vibration and noise reduction, providing valuable insights for further research and development.