Paweł Dudziec
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Paweł Dudziec has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Mariusz Jerzy Stolarski
Department of Plant Breeding and Bioresource Engineering, Faculty of Agriculture and Forestry, University of Warmia and Mazury in Olsztyn, 10-724 Olsztyn, Poland
11 shared publications - Ewelina Olba-Zięty
Department of Plant Breeding and Bioresource Engineering, Faculty of Agriculture and Forestry, University of Warmia and Mazury in Olsztyn, 10-724 Olsztyn, Poland
5 shared publications - Kazimierz Warmiński
Centre for Bioeconomy and Renewable Energies, University of Warmia and Mazury in Olsztyn, 10-727 Olsztyn, Poland
4 shared publications - Michał Krzyżaniak
Department of Genetics, Plant Breeding and Bioresource Engineering, Faculty of Agriculture and Forestry, Centre for Bioeconomy and Renewable Energies, University of Warmia and Mazury in Olsztyn, 10-724 Olsztyn, Poland
4 shared publications - Paweł Stachowicz
Department of Genetics, Plant Breeding and Bioresource Engineering, Faculty of Agriculture and Forestry, Centre for Bioeconomy and Renewable Energies, University of Warmia and Mazury in Olsztyn, Plac Łódzki 3, 10-724 Olsztyn, Poland
2 shared publications - Adam Nocoń
Chamber of Commerce for Renewable Energy Devices, 41-250 Czeladź, Poland
1 shared publication
Latest Publications
- Open Access
Direct Energy Inputs for Milk Production in Polish Dairy Farms
Increasing milk production efficiency, along with the ongoing consolidation and mechanization of farms, is making efficient energy use more critical than ever. Therefore, this study aimed to determine the direct energy inputs for milk production at the farm level in Poland, based on diesel fuel and electricity consumption in production processes and in milk collection and storage. The study used data from 75 dairy farms in Poland, classified into three farm-size categories based on total farm area: small farms (–1 of milk, diesel fuel consumption of 0.272 kWh kg–1 of milk, and total direct energy consumption of 0.317 kWh kg–1 of milk. Medium-sized farms had the lowest electricity consumption (0.041 kWh kg–1 of milk). For small and large farms, this indicator was 7.3% and 19.5% higher, respectively, than for medium-sized farms. Medium-sized farms also showed the lowest diesel fuel consumption, at 0.261 kWh kg–1 of milk. For small and large farms, this indicator was 2.7% and 11.5% higher, respectively. Accordingly, medium-sized farms had the lowest direct energy consumption, at 0.302 kWh kg–1 of milk. For small farms, this indicator was 3.3% higher, whereas for large farms, it was 12.6% higher than for medium-sized farms. The unadjusted differences in direct energy intensity between farm size categories were not statistically significant. However, after accounting for milk yield per cow in the ANCOVA analysis, a significant effect of farm size category was observed (p = 0.0134), with small farms showing significantly lower adjusted total direct energy intensity than large farms (Holm-adjusted p = 0.011). Nevertheless, sensitivity analyses showed that the farm-size effect was no longer statistically significant after additionally accounting for grassland area (p = 0.097) or arable land area (p = 0.149). These results should therefore be interpreted only as a characterization and analysis of statistical relationships within the surveyed farms, rather than as evidence of causal relationships or a representative assessment of all dairy farms in Poland.
Open AccessDirect Energy Inputs for Milk Production in Polish Dairy Farms
Increasing milk production efficiency, along with the ongoing consolidation and mechanization of farms, is making efficient energy use more critical than ever. Therefore, this study aimed to determine the direct energy inputs for milk production at the farm level in Poland, based on diesel fuel and electricity consumption in production processes and in milk collection and storage. The study used data from 75 dairy farms in Poland, classified into three farm-size categories based on total farm area: small farms (–1 of milk, diesel fuel consumption of 0.272 kWh kg–1 of milk, and total direct energy consumption of 0.317 kWh kg–1 of milk. Medium-sized farms had the lowest electricity consumption (0.041 kWh kg–1 of milk). For small and large farms, this indicator was 7.3% and 19.5% higher, respectively, than for medium-sized farms. Medium-sized farms also showed the lowest diesel fuel consumption, at 0.261 kWh kg–1 of milk. For small and large farms, this indicator was 2.7% and 11.5% higher, respectively. Accordingly, medium-sized farms had the lowest direct energy consumption, at 0.302 kWh kg–1 of milk. For small farms, this indicator was 3.3% higher, whereas for large farms, it was 12.6% higher than for medium-sized farms. The unadjusted differences in direct energy intensity between farm size categories were not statistically significant. However, after accounting for milk yield per cow in the ANCOVA analysis, a significant effect of farm size category was observed (p = 0.0134), with small farms showing significantly lower adjusted total direct energy intensity than large farms (Holm-adjusted p = 0.011). Nevertheless, sensitivity analyses showed that the farm-size effect was no longer statistically significant after additionally accounting for grassland area (p = 0.097) or arable land area (p = 0.149). These results should therefore be interpreted only as a characterization and analysis of statistical relationships within the surveyed farms, rather than as evidence of causal relationships or a representative assessment of all dairy farms in Poland.
- Open Access
Short-Rotation Coppice Pellets as Biofuels in a Modern Boiler with an Electrostatic Precipitator: Particulate Matter and Carbon Monoxide Emissions
Alternative pellet feedstocks must be evaluated for energy performance and air pollutant emissions. This study assessed particulate matter (PM) and carbon monoxide (CO) emissions from short-rotation coppice (SRC) pellets combusted in a pellet boiler equipped with an electrostatic precipitator (ESP). Pine and birch pellets served as references. Emissions were measured with and without the ESP and expressed per flue gas volume, fuel energy, and fuel mass. Pellet species significantly affected PM and CO, whereas the ESP significantly reduced PM but did not significantly affect CO. The ESP reduced mean PM concentrations by 52.5%, from 53.81 to 25.54 mg m−3. The highest PM concentration occurred for willow without the ESP (90.96 mg m−3), and the lowest for pine with the ESP (17.51 mg m−3); the highest value was 419.5% greater. Poplar produced relatively low PM but the highest CO emissions. Among SRC fuels, black locust provided the most balanced profile, combining relatively low PM and CO with the highest combustion efficiency (93.20%). Pine and birch, particularly with the ESP, produced the lowest emissions. These findings indicate that SRC pellets showed emission suitability for use in the tested boiler based on PM and CO emission levels.
Open AccessShort-Rotation Coppice Pellets as Biofuels in a Modern Boiler with an Electrostatic Precipitator: Particulate Matter and Carbon Monoxide Emissions
Alternative pellet feedstocks must be evaluated for energy performance and air pollutant emissions. This study assessed particulate matter (PM) and carbon monoxide (CO) emissions from short-rotation coppice (SRC) pellets combusted in a pellet boiler equipped with an electrostatic precipitator (ESP). Pine and birch pellets served as references. Emissions were measured with and without the ESP and expressed per flue gas volume, fuel energy, and fuel mass. Pellet species significantly affected PM and CO, whereas the ESP significantly reduced PM but did not significantly affect CO. The ESP reduced mean PM concentrations by 52.5%, from 53.81 to 25.54 mg m−3. The highest PM concentration occurred for willow without the ESP (90.96 mg m−3), and the lowest for pine with the ESP (17.51 mg m−3); the highest value was 419.5% greater. Poplar produced relatively low PM but the highest CO emissions. Among SRC fuels, black locust provided the most balanced profile, combining relatively low PM and CO with the highest combustion efficiency (93.20%). Pine and birch, particularly with the ESP, produced the lowest emissions. These findings indicate that SRC pellets showed emission suitability for use in the tested boiler based on PM and CO emission levels.
- Open Access
- 2 September 2026
- Published by Elsevier in Industrial Crops and Products
- Vol. 252
Impact of flower harvest during flowering on yield components in various cultivars of industrial hemp
- 2 September 2026
- Published by Elsevier in Industrial Crops and Products
- Vol. 252
Open AccessImpact of flower harvest during flowering on yield components in various cultivars of industrial hemp
- Open Access
- 10 August 2026
- Published by Elsevier in Industrial Crops and Products
- Vol. 251
Energy efficiency in industrial hemp stalk production depending on cultivar and flower harvest
- 10 August 2026
- Published by Elsevier in Industrial Crops and Products
- Vol. 251
Open AccessEnergy efficiency in industrial hemp stalk production depending on cultivar and flower harvest
- Open Access
- 18 May 2026
- Published by Elsevier in Industrial Crops and Products
- Vol. 247
How do cultivar, year, and flower harvest affect industrial hemp stalk quality?
- 18 May 2026
- Published by Elsevier in Industrial Crops and Products
- Vol. 247
Open AccessHow do cultivar, year, and flower harvest affect industrial hemp stalk quality?
- Open Access
- 30 August 2025
- Published by Elsevier in Industrial Crops and Products
- Vol. 235
Industrial hemp solid hydro-distillation residue-properties and diversity
- 30 August 2025
- Published by Elsevier in Industrial Crops and Products
- Vol. 235
Open AccessIndustrial hemp solid hydro-distillation residue-properties and diversity
- Open Access
- 30 July 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (15) , 8446
The Carbon Footprint of Milk Production on a Farm
The environmental impact of milk production, particularly its share of greenhouse gas (GHG) emissions, is a topic under investigation in various parts of the world. This paper presents an overview of current knowledge on the carbon footprint (CF) of milk production at the farm level, with a particular focus on technological, environmental and organisational factors affecting emission levels. The analysis is based on a review of, inter alia, 46 peer-reviewed publications and 11 environmental reports, legal acts and databases concerning the CF in different regions and under various production systems. This study identifies the main sources of emissions, including enteric fermentation, manure management, and the production and use of feed and fertiliser. It also demonstrates the significant variability of the CF values, which range, on average, from 0.78 to 3.20 kg CO2 eq kg−1 of milk, determined by the farm scale, nutritional strategies, local environmental and economic determinants, and the methodology applied. Moreover, this study stresses that higher production efficiency and integrated farm management could reduce the CF per milk unit, with further intensification having, however, diminishing effects. The application of life cycle assessment (LCA) methods is essential for a reliable assessment and comparison of the CF between systems. Ultimately, an effective CF reduction requires a comprehensive approach that combines improved nutritional practices, efficient use of resources, and implementation of technological innovations adjusted to regional and farm-specific determinants. The solutions presented in this paper may serve as guidelines for practitioners and decision-makers with regard to reducing GHG emissions.
- 30 July 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (15) , 8446
Open AccessThe Carbon Footprint of Milk Production on a Farm
The environmental impact of milk production, particularly its share of greenhouse gas (GHG) emissions, is a topic under investigation in various parts of the world. This paper presents an overview of current knowledge on the carbon footprint (CF) of milk production at the farm level, with a particular focus on technological, environmental and organisational factors affecting emission levels. The analysis is based on a review of, inter alia, 46 peer-reviewed publications and 11 environmental reports, legal acts and databases concerning the CF in different regions and under various production systems. This study identifies the main sources of emissions, including enteric fermentation, manure management, and the production and use of feed and fertiliser. It also demonstrates the significant variability of the CF values, which range, on average, from 0.78 to 3.20 kg CO2 eq kg−1 of milk, determined by the farm scale, nutritional strategies, local environmental and economic determinants, and the methodology applied. Moreover, this study stresses that higher production efficiency and integrated farm management could reduce the CF per milk unit, with further intensification having, however, diminishing effects. The application of life cycle assessment (LCA) methods is essential for a reliable assessment and comparison of the CF between systems. Ultimately, an effective CF reduction requires a comprehensive approach that combines improved nutritional practices, efficient use of resources, and implementation of technological innovations adjusted to regional and farm-specific determinants. The solutions presented in this paper may serve as guidelines for practitioners and decision-makers with regard to reducing GHG emissions.
- 27 February 2024
- Published by Elsevier in Renewable Energy
- Vol. 224
How do key for the bioenergy industry properties of baled biomass change over two years of storage?
- 27 February 2024
- Published by Elsevier in Renewable Energy
- Vol. 224
How do key for the bioenergy industry properties of baled biomass change over two years of storage?
- 4 December 2022
- Published by Elsevier in Renewable Energy
- Vol. 202, 822-833
Diversity of properties of sawmill residues used as feedstock for energy generation
- 4 December 2022
- Published by Elsevier in Renewable Energy
- Vol. 202, 822-833
Diversity of properties of sawmill residues used as feedstock for energy generation
- Open Access
Forest Dendromass as Energy Feedstock: Diversity of Properties and Composition Depending on Systematic Genus and Organ
Exhaustion of fossil fuel resources, shrinking forest areas, with accompanying deterioration of their quality and striving (also of the society) to make forests perform their ecological function, with simultaneous development and propagation of the biomass conversion technologies—all of this necessitates research of forest biomass diversification. It is a consequence of the fact that its properties and composition depend not only on the genus but also on the plant organ, and they each time determine its usability as a raw biomaterial in a wide range of thermal, physical, or chemical conversion processes. This study reviewed and analysed selected qualitative and quantitative features of forest dendromass, taking into account the genus and a plant organ/morphological part, followed by a group of trees (coniferous and deciduous) and without the latter differentiation. The study involved an analysis of data covering 15 selected qualitative-quantitative features of forest dendromass within three main and nine additional plant organs/morphological parts and 21 genera (5 coniferous and 16 deciduous) typical of the temperate climate.
Open AccessForest Dendromass as Energy Feedstock: Diversity of Properties and Composition Depending on Systematic Genus and Organ
Exhaustion of fossil fuel resources, shrinking forest areas, with accompanying deterioration of their quality and striving (also of the society) to make forests perform their ecological function, with simultaneous development and propagation of the biomass conversion technologies—all of this necessitates research of forest biomass diversification. It is a consequence of the fact that its properties and composition depend not only on the genus but also on the plant organ, and they each time determine its usability as a raw biomaterial in a wide range of thermal, physical, or chemical conversion processes. This study reviewed and analysed selected qualitative and quantitative features of forest dendromass, taking into account the genus and a plant organ/morphological part, followed by a group of trees (coniferous and deciduous) and without the latter differentiation. The study involved an analysis of data covering 15 selected qualitative-quantitative features of forest dendromass within three main and nine additional plant organs/morphological parts and 21 genera (5 coniferous and 16 deciduous) typical of the temperate climate.