Jooheon Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jooheon Kim has a total of 122 co-authors. Here are the top co-authors by number of shared publications:
Dabin Park
Department of Mechanical and Aerospace Engineering, University of California, Irvine, CA 92679, USA
44 shared publicationsHyun Ju
33 shared publicationsMinsu Kim
School of Chemical Engineering Chung‐Ang University Seoul Republic of Korea
25 shared publicationsMyeongjin Kim
25 shared publicationsWondu Lee
16 shared publicationsSubin Lee
15 shared publications
Latest Publications
- 10 November 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (67) , 46187-46203
MOF-derived confinement of defect-rich CeO 2− x /VN heterointerfaces for durable high-current alkaline water electrolysis
Defect-rich CeO 2− x /VN heterointerfaces accelerate water dissociation and optimize hydrogen adsorption, enabling durable high-current alkaline hydrogen evolution.
- 10 November 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (67) , 46187-46203
MOF-derived confinement of defect-rich CeO 2− x /VN heterointerfaces for durable high-current alkaline water electrolysis
Defect-rich CeO 2− x /VN heterointerfaces accelerate water dissociation and optimize hydrogen adsorption, enabling durable high-current alkaline hydrogen evolution.
- 19 October 2026
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 13 (20) , 10422-10431
Polysilazane-impregnated high-entropy LDH-grown cellulose nanofiber aerogels for flame-resistant thermal insulation
Hierarchical integration of HE-LDH, CNFA, and polysilazane enables lightweight thermal insulation with enhanced fire resistance and structural stability.
- 19 October 2026
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 13 (20) , 10422-10431
Polysilazane-impregnated high-entropy LDH-grown cellulose nanofiber aerogels for flame-resistant thermal insulation
Hierarchical integration of HE-LDH, CNFA, and polysilazane enables lightweight thermal insulation with enhanced fire resistance and structural stability.
- Open Access
- 14 October 2026
- Published by Elsevier in Materials & Design
- Vol. 271
Multifunctional phase-change thermal interface composite integrating a natural cotton-derived NiFe2O4–carbon network with AlN
- 14 October 2026
- Published by Elsevier in Materials & Design
- Vol. 271
Open AccessMultifunctional phase-change thermal interface composite integrating a natural cotton-derived NiFe2O4–carbon network with AlN
- 28 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (19) , 12988-12996
Dual-Layer Microencapsulated Phase Change Material Composite with Enthalpy-Active Shell for Thermal Absorption and Directional Heat Management
Localized heat accumulation in electronic devices degrades performance, safety, and cycle life. Phase change materials (PCMs) have been widely investigated for passive thermal regulation; however, conventional core–shell encapsulated PCMs often exhibit limited effective heat absorption because shell materials remain thermally inactive and heat transport in composite systems remains uncontrolled. In this study, the naturally derived materials gum arabic and gelatin were used as shell materials. The gum arabic/gelatin shell exhibited endothermic reactions over a wider range, providing additional heat absorption beyond the intrinsic phase change enthalpy of the PCM core. Two functionally differentiated composite systems were developed. To mitigate localized heat accumulation, two differentiated composites were developed to address localized heat generation in electronic devices. An insulation-oriented heptadecane and silica aerogel (SA) based composite (BPA/Heptadecane/SA) exhibits a through-plane thermal conductivity of 0.15 W/mK and a heat absorption capacity of 54.7 J/g, whereas eicosane and a heat-spreading-expanded graphite (EG) based composite (BPA/Eicosane/EG) exhibits an in-plane thermal conductivity of 4.80 W/mK and a heat absorption capacity of 59.3 J/g. The results confirm that the proposed enthalpy-enhanced shell structure functions as an active thermal damper and that the hierarchical composite architecture enables simultaneous thermal insulation and directional heat management to mitigate localized heating.
- 28 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (19) , 12988-12996
Dual-Layer Microencapsulated Phase Change Material Composite with Enthalpy-Active Shell for Thermal Absorption and Directional Heat Management
Localized heat accumulation in electronic devices degrades performance, safety, and cycle life. Phase change materials (PCMs) have been widely investigated for passive thermal regulation; however, conventional core–shell encapsulated PCMs often exhibit limited effective heat absorption because shell materials remain thermally inactive and heat transport in composite systems remains uncontrolled. In this study, the naturally derived materials gum arabic and gelatin were used as shell materials. The gum arabic/gelatin shell exhibited endothermic reactions over a wider range, providing additional heat absorption beyond the intrinsic phase change enthalpy of the PCM core. Two functionally differentiated composite systems were developed. To mitigate localized heat accumulation, two differentiated composites were developed to address localized heat generation in electronic devices. An insulation-oriented heptadecane and silica aerogel (SA) based composite (BPA/Heptadecane/SA) exhibits a through-plane thermal conductivity of 0.15 W/mK and a heat absorption capacity of 54.7 J/g, whereas eicosane and a heat-spreading-expanded graphite (EG) based composite (BPA/Eicosane/EG) exhibits an in-plane thermal conductivity of 4.80 W/mK and a heat absorption capacity of 59.3 J/g. The results confirm that the proposed enthalpy-enhanced shell structure functions as an active thermal damper and that the hierarchical composite architecture enables simultaneous thermal insulation and directional heat management to mitigate localized heating.
- Open Access
In Situ‐Grown Graphdiyne Interfaces on Cu‐Retained CoCuFe Phosphide‐Like Octahedra for Overall Water Splitting
A Cu‐retention‐assisted precursor‐conversion strategy is developed to construct a graphdiyne (GDY)‐coupled CoCuFe phosphide‐like heterostructure for alkaline water electrolysis. Octahedral Cu 2 O directs the particle morphology and serves as a Cu source, whereas the CoFe Prussian blue analogue (PBA) shell supplies the Co and Fe species required to form the multimetal phosphide‐like framework. In situ growth of GDY preserves the precursor‐derived architecture and establishes interfacial contact between the π‐conjugated GDY layer and the phosphide‐like domain. The resulting GDY@P‐CoCuFe requires overpotentials of 211 and 88.5 mV to reach 10 mA cm −2 for the oxygen and hydrogen evolution reactions, respectively, in 1.0 M KOH. When employed as both the anode and cathode in a symmetric electrolyzer, GDY@P‐CoCuFe delivers 10 mA cm −2 at a cell voltage of 1.45 V and maintains stable operation for 100 h. Spectroscopic analyses and density functional theory calculations suggest that interfacial charge redistribution and the formation of Cu‐adjacent P sites contribute to favorable hydrogen adsorption. Post‐operation characterization further reveals partial oxyhydroxide‐like surface reconstruction during OER, while the underlying phosphide‐like framework and GDY structure remain largely preserved. These findings demonstrate that combining controlled Cu retention with direct GDY interfacial growth provides an effective route for developing efficient and durable bifunctional electrocatalysts.
Open AccessIn Situ‐Grown Graphdiyne Interfaces on Cu‐Retained CoCuFe Phosphide‐Like Octahedra for Overall Water Splitting
A Cu‐retention‐assisted precursor‐conversion strategy is developed to construct a graphdiyne (GDY)‐coupled CoCuFe phosphide‐like heterostructure for alkaline water electrolysis. Octahedral Cu 2 O directs the particle morphology and serves as a Cu source, whereas the CoFe Prussian blue analogue (PBA) shell supplies the Co and Fe species required to form the multimetal phosphide‐like framework. In situ growth of GDY preserves the precursor‐derived architecture and establishes interfacial contact between the π‐conjugated GDY layer and the phosphide‐like domain. The resulting GDY@P‐CoCuFe requires overpotentials of 211 and 88.5 mV to reach 10 mA cm −2 for the oxygen and hydrogen evolution reactions, respectively, in 1.0 M KOH. When employed as both the anode and cathode in a symmetric electrolyzer, GDY@P‐CoCuFe delivers 10 mA cm −2 at a cell voltage of 1.45 V and maintains stable operation for 100 h. Spectroscopic analyses and density functional theory calculations suggest that interfacial charge redistribution and the formation of Cu‐adjacent P sites contribute to favorable hydrogen adsorption. Post‐operation characterization further reveals partial oxyhydroxide‐like surface reconstruction during OER, while the underlying phosphide‐like framework and GDY structure remain largely preserved. These findings demonstrate that combining controlled Cu retention with direct GDY interfacial growth provides an effective route for developing efficient and durable bifunctional electrocatalysts.
- Open Access
- 13 July 2026
- Published by Wiley in Advanced Electronic Materials
- Vol. 12 (20)
3D MXene Aerogel Frameworks With In Situ‐Grown BiFeO 3 for Synergistically Enhanced Thermoelectric Performance
Three‐dimensional BiFeO 3 @MXene aerogel composites with enhanced thermoelectric performance were developed through in situ interfacial engineering. The MXene aerogel provides continuous electrical transport pathways and intrinsically low thermal conductivity, while uniformly grown BiFeO 3 delivers high thermopower and modulates carrier transport via heterointerfaces. As a result, the composites exhibit a significantly enhanced Seebeck coefficient while maintaining moderate electrical conductivity and reduced thermal conductivity. The optimized composite with a BiFeO 3 ‐to‐MXene mass ratio of 1:1 (B1M1) exhibited a Seebeck coefficient of 192.7 µV/K, an electrical conductivity of 181.3 S/cm, and a low thermal conductivity of 0.32 W/m∙K, leading to a maximum power factor of 612.1 µW/m∙K 2 and a peak figure of merit ( ZT ) of 0.53 at 400 K. In addition, the composite showed good environmental stability under humid air conditions and stable thermoelectric output at the device level. This study demonstrates that in situ growth of oxide phases within a 3D MXene aerogel is an effective strategy for overcoming thermoelectric trade‐offs and enabling the development of lightweight, high‐performance thermoelectric materials.
- 13 July 2026
- Published by Wiley in Advanced Electronic Materials
- Vol. 12 (20)
Open Access3D MXene Aerogel Frameworks With In Situ‐Grown BiFeO 3 for Synergistically Enhanced Thermoelectric Performance
Three‐dimensional BiFeO 3 @MXene aerogel composites with enhanced thermoelectric performance were developed through in situ interfacial engineering. The MXene aerogel provides continuous electrical transport pathways and intrinsically low thermal conductivity, while uniformly grown BiFeO 3 delivers high thermopower and modulates carrier transport via heterointerfaces. As a result, the composites exhibit a significantly enhanced Seebeck coefficient while maintaining moderate electrical conductivity and reduced thermal conductivity. The optimized composite with a BiFeO 3 ‐to‐MXene mass ratio of 1:1 (B1M1) exhibited a Seebeck coefficient of 192.7 µV/K, an electrical conductivity of 181.3 S/cm, and a low thermal conductivity of 0.32 W/m∙K, leading to a maximum power factor of 612.1 µW/m∙K 2 and a peak figure of merit ( ZT ) of 0.53 at 400 K. In addition, the composite showed good environmental stability under humid air conditions and stable thermoelectric output at the device level. This study demonstrates that in situ growth of oxide phases within a 3D MXene aerogel is an effective strategy for overcoming thermoelectric trade‐offs and enabling the development of lightweight, high‐performance thermoelectric materials.
- 10 July 2026
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 366
Harnessing Activated Carbon Pores as Growth Templates for Low-Thermal-Conductive Thermoelectric Films
- 10 July 2026
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 366
Harnessing Activated Carbon Pores as Growth Templates for Low-Thermal-Conductive Thermoelectric Films
- 9 July 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 691
CNT-confined W2N and NiCo nanodomains for bifunctional ORR/OER air cathodes in rechargeable Zn–air batteries
- 9 July 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 691
CNT-confined W2N and NiCo nanodomains for bifunctional ORR/OER air cathodes in rechargeable Zn–air batteries
- 10 June 2026
- Published by Elsevier in Surfaces and Interfaces
- Vol. 95
Phase change assisted passive daytime radiative cooling using hollow SiO2 fillers in a PEG-PDMS matrix
- 10 June 2026
- Published by Elsevier in Surfaces and Interfaces
- Vol. 95
Phase change assisted passive daytime radiative cooling using hollow SiO2 fillers in a PEG-PDMS matrix