Ke Xiang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ke Xiang has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Alfrendo Satyanaga
Department of Civil and Environmental Engineering, School of Engineering and Digital Sciences, Nazarbayev University, Nur-Sultan 010000, Kazakhstan
6 shared publications - Qian Zhai
School of Civil Engineering, Southeast University, Nanjing 211189, China
3 shared publications - Guoliang Dai
School of Civil Engineering, Southeast University, Nanjing 211189, China
2 shared publications - Jin Tao
Bridge Engineering Research Center, Southeast University, Nanjing 210096, China
2 shared publications - Qiang Zhou
China Construction Infrastructure Co., Ltd., Beijing 100029, China
2 shared publications - Ruize Zhang
School of Civil Engineering, Southeast University, Nanjing 210096, China
2 shared publications
Latest Publications
- Open Access
Seismic Behavior of Cluster-Connected Prefabricated Shear Walls under Different Axial Compression Ratios
This study analyzes the nonlinear seismic behavior of cluster-connected prefabricated shear walls under varying axial compression ratios. The investigation focuses on the connectivity of shear wall segments assembled using cluster connections rather than separate walls connected by beams. Using the finite element software ABAQUS, this study simulates monotonic horizontal displacement loading to evaluate the yield strength, peak strength, and deformation capacity of the shear walls. The results demonstrate that the horizontal load-bearing capacity of the shear wall significantly improves with an increase in axial compression ratio, while the axial compression ratio also influences ductility. The numerical simulations are validated against experimental data, confirming the accuracy of the model. These findings provide essential insights for optimizing the seismic design of precast shear walls.
Open AccessSeismic Behavior of Cluster-Connected Prefabricated Shear Walls under Different Axial Compression Ratios
This study analyzes the nonlinear seismic behavior of cluster-connected prefabricated shear walls under varying axial compression ratios. The investigation focuses on the connectivity of shear wall segments assembled using cluster connections rather than separate walls connected by beams. Using the finite element software ABAQUS, this study simulates monotonic horizontal displacement loading to evaluate the yield strength, peak strength, and deformation capacity of the shear walls. The results demonstrate that the horizontal load-bearing capacity of the shear wall significantly improves with an increase in axial compression ratio, while the axial compression ratio also influences ductility. The numerical simulations are validated against experimental data, confirming the accuracy of the model. These findings provide essential insights for optimizing the seismic design of precast shear walls.
- Open Access
Numerical Simulation of Cluster-Connected Shear Wall Structures under Seismic Loading
The reinforced part at the bottom of high-rise assembled monolithic concrete shear wall structures generally uses cast-in-place concrete due to high elastic–plastic deformation capacity requirements, which limits the advantages of prefabricated shear wall structures. This study investigates the feasibility of using cluster connections to assemble integral shear wall structures at the bottom by modifying the vertical reinforcement of the cluster connection. Numerical simulations using ABAQUS (Version 2019) were validated with laboratory test results. The seismic performance of prefabricated shear walls with cluster connections was examined under varying axial compression ratios. Results indicate that the prefabricated shear wall demonstrates higher bearing and deformation capacity compared to cast-in-place shear walls. The degradation of strength and equivalent stiffness in prefabricated walls is slower, showing better seismic performance under higher axial compression ratios. The cluster connection ensures effective force transmission, maintaining wall integrity. After optimization, the prefabricated shear wall with cluster connection meets the expected seismic performance, providing a basis for its application in reinforced bottom sections.
Open AccessNumerical Simulation of Cluster-Connected Shear Wall Structures under Seismic Loading
The reinforced part at the bottom of high-rise assembled monolithic concrete shear wall structures generally uses cast-in-place concrete due to high elastic–plastic deformation capacity requirements, which limits the advantages of prefabricated shear wall structures. This study investigates the feasibility of using cluster connections to assemble integral shear wall structures at the bottom by modifying the vertical reinforcement of the cluster connection. Numerical simulations using ABAQUS (Version 2019) were validated with laboratory test results. The seismic performance of prefabricated shear walls with cluster connections was examined under varying axial compression ratios. Results indicate that the prefabricated shear wall demonstrates higher bearing and deformation capacity compared to cast-in-place shear walls. The degradation of strength and equivalent stiffness in prefabricated walls is slower, showing better seismic performance under higher axial compression ratios. The cluster connection ensures effective force transmission, maintaining wall integrity. After optimization, the prefabricated shear wall with cluster connection meets the expected seismic performance, providing a basis for its application in reinforced bottom sections.
- Open Access
- 25 September 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (19) , 14163
Evaluation of the Performance of the Horizontal Drain in Drainage of the Infiltrated Water from Slope Soil under Rainfall Conditions
It is known that rainwater infiltration is crucial for rainfall-induced slope failure because the infiltrated water can significantly weaken the shear strength of unsaturated soil. Horizontal drains are commonly used to provide appropriate drainage for the rainwater that percolates out of a slope. However, the effects of the length and location of the subsoil pipe on the performance of horizontal drains have not been extensively investigated. In this paper, a parametric analysis by using a numerical model was adopted to investigate the distribution of pore-water pressure in a slope. The results reveal that an inclination angle of 10–15 degrees and strategic placement at the slope toe and mid-slope provide optimal drainage performance, as compared to the effect of pipe length. Multi-layers of horizontal drain (based on 10 m length) are recommended for slopes with a height of more than 15 m.
- 25 September 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (19) , 14163
Open AccessEvaluation of the Performance of the Horizontal Drain in Drainage of the Infiltrated Water from Slope Soil under Rainfall Conditions
It is known that rainwater infiltration is crucial for rainfall-induced slope failure because the infiltrated water can significantly weaken the shear strength of unsaturated soil. Horizontal drains are commonly used to provide appropriate drainage for the rainwater that percolates out of a slope. However, the effects of the length and location of the subsoil pipe on the performance of horizontal drains have not been extensively investigated. In this paper, a parametric analysis by using a numerical model was adopted to investigate the distribution of pore-water pressure in a slope. The results reveal that an inclination angle of 10–15 degrees and strategic placement at the slope toe and mid-slope provide optimal drainage performance, as compared to the effect of pipe length. Multi-layers of horizontal drain (based on 10 m length) are recommended for slopes with a height of more than 15 m.
- Open Access
- 18 April 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (8) , 6797
Analysis of Excavation Parameters on Face Stability in Small Curvature Shield Tunnels
This study investigates the face stability of small curvature shield tunnels during excavation and its relationship with various excavation parameters. The stability of the excavation face is critical to the safety and efficiency of underground construction projects. Despite the increase in the use of small curvature shield tunnels in urban areas, research works on this type of tunnel are limited and the existing literature focuses only on straight shield tunnels. This study addresses this research gap through numerical simulations, analyzing the effects of different excavation parameters such as jacking force, cutting speed, and soil conditioning on face stability. The results of the study show that the excavation parameters significantly affect face stability. The findings can be used to optimize the performance of small curvature shield tunnels and support their continued development in urban areas.
- 18 April 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (8) , 6797
Open AccessAnalysis of Excavation Parameters on Face Stability in Small Curvature Shield Tunnels
This study investigates the face stability of small curvature shield tunnels during excavation and its relationship with various excavation parameters. The stability of the excavation face is critical to the safety and efficiency of underground construction projects. Despite the increase in the use of small curvature shield tunnels in urban areas, research works on this type of tunnel are limited and the existing literature focuses only on straight shield tunnels. This study addresses this research gap through numerical simulations, analyzing the effects of different excavation parameters such as jacking force, cutting speed, and soil conditioning on face stability. The results of the study show that the excavation parameters significantly affect face stability. The findings can be used to optimize the performance of small curvature shield tunnels and support their continued development in urban areas.
- Open Access
- 18 January 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (3) , 1822
Effect of the Wetting Hydraulic Property of Soil on 1-D Water Infiltration
Rainwater infiltration is primarily governed by the soil-water characteristic curve (SWCC) and hydraulic conductivity function (HCF) of soil. Both the SWCC and the HCF are hysteretic during the drying and wetting processes. In a numerical simulation, different seepage results can be obtained by incorporating different hydraulic conductivity functions of soil. In practice, the wetting HCF is commonly estimated from the wetting SWCC using the statistical method, which is named HCFswcc,w in this note. However, there is no study that has verified the results from seepage analyses using HCFswcc,w. Therefore, the objective of this study is to investigate the influence of wetting SWCC and wetting HCF on 1-D water infiltration. The results from the numerical simulations were verified with the instrumentation reading from a soil column. It was observed that the results from the model using wetting HCFPSDF, which defines the wetting HCF estimated using the concept of pore-size distribution function, gave better agreement with the instrumented data. Therefore, both wetting SWCC and wetting HCFPSDF are advised to be used as input information for the numerical simulation of rainwater infiltration.
- 18 January 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (3) , 1822
Open AccessEffect of the Wetting Hydraulic Property of Soil on 1-D Water Infiltration
Rainwater infiltration is primarily governed by the soil-water characteristic curve (SWCC) and hydraulic conductivity function (HCF) of soil. Both the SWCC and the HCF are hysteretic during the drying and wetting processes. In a numerical simulation, different seepage results can be obtained by incorporating different hydraulic conductivity functions of soil. In practice, the wetting HCF is commonly estimated from the wetting SWCC using the statistical method, which is named HCFswcc,w in this note. However, there is no study that has verified the results from seepage analyses using HCFswcc,w. Therefore, the objective of this study is to investigate the influence of wetting SWCC and wetting HCF on 1-D water infiltration. The results from the numerical simulations were verified with the instrumentation reading from a soil column. It was observed that the results from the model using wetting HCFPSDF, which defines the wetting HCF estimated using the concept of pore-size distribution function, gave better agreement with the instrumented data. Therefore, both wetting SWCC and wetting HCFPSDF are advised to be used as input information for the numerical simulation of rainwater infiltration.
- Open Access
- 5 December 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (23) , 16230
Evaluation of the Ground Settlement in an Urban Area Resulting from a Small Curvature Tunneling Construction
The transportation system is one of the major infrastructures in urban areas, and it serves 56% of the world’s population. Nowadays, metro lines are developing fast in urban areas. Due to the restrictions of urban fields, metro lines are usually not planned straight, and a curved line is required to connect stations in different locations in a city. As a result, small curvature tunnels are commonly constructed in urban areas. The tunneling construction in a city area may cause ground settlement, which is sensitive to surrounding buildings and underground utilities. The aim of this study is to explore the impact of curvature alignment on the ground settlement. In this paper, ground settlements induced by small curvature shield tunneling were evaluated by using a numerical analysis. A total of six cases were selected for the analysis. The results obtained from the numerical simulations were compared with Peck’s equation. It is observed that Peck’s equation can be used for the estimation of the maximum settlement. However, the ground settlements on both sides of the central axis of the curved tunnel are asymmetrical, and Peck’s equation, which provides a symmetrical settlement, may not be applicable in the case of small curvature tunnels.
- 5 December 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (23) , 16230
Open AccessEvaluation of the Ground Settlement in an Urban Area Resulting from a Small Curvature Tunneling Construction
The transportation system is one of the major infrastructures in urban areas, and it serves 56% of the world’s population. Nowadays, metro lines are developing fast in urban areas. Due to the restrictions of urban fields, metro lines are usually not planned straight, and a curved line is required to connect stations in different locations in a city. As a result, small curvature tunnels are commonly constructed in urban areas. The tunneling construction in a city area may cause ground settlement, which is sensitive to surrounding buildings and underground utilities. The aim of this study is to explore the impact of curvature alignment on the ground settlement. In this paper, ground settlements induced by small curvature shield tunneling were evaluated by using a numerical analysis. A total of six cases were selected for the analysis. The results obtained from the numerical simulations were compared with Peck’s equation. It is observed that Peck’s equation can be used for the estimation of the maximum settlement. However, the ground settlements on both sides of the central axis of the curved tunnel are asymmetrical, and Peck’s equation, which provides a symmetrical settlement, may not be applicable in the case of small curvature tunnels.