PDPia Damlin

Pia Damlin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pia Damlin has a total of 58 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Redox-coupled ZnCl2 water-in-salt electrolyte enables high capacity and long-term cycling stability in Ti3C2Tx MXene supercapacitors

    by Ashwini Jadhav, Plawan Kumar Jha, Pia Damlin, Sachin Kochrekar, Sari Granroth, Tuomas Karskela, Mikko Salomäki, Carita Kvarnström

  • Open Access

    Ultrafast ambipolar switching in electrochromic copolymer thin films of zinc( ii ) tetrakis(4-aminophenyl)porphyrin – 3,4-ethylenedioxythiophene

    by Sachin Kochrekar, Subrahmanyam Sappati, Plawan Kumar Jha, Ermei Mäkilä, Ashwini Jadhav, Pia Damlin, Mikko Salomäki, Carita Kvarnström

    Electrocopolymerization of different monomers is a useful approach for developing materials with tailored electrochromic properties and expanded color palettes.


  • Open Access

    Azoniafluorenones: A New Family of Two‐Electron Storage Electrolytes for Sustainable Near‐Neutral pH Aqueous Organic Flow Battery

    by Maxime Artault, Gabriel Gonzalez, Pia Damlin, Juho Toivola, Aaron Mailman, Jenna Hannonen, Petri M Pihko, Pekka Peljo

    Fluorenones are suitable candidates for negolytes in flow batteries, as they demonstrate the ability to store 2 electrons, and can achieve reversibility, solubility, and stability with appropriate molecular design. However, limitations persist such as the use of alkaline media, high redox potentials, and a limited scope for optimization. Herein, azoniafluorenones is reported as a novel class of negolytes. They can be readily accessed in a highly modular fashion from inexpensive commercially available materials (e.g., boronic acids). Variations in the substitution patterns reveal the 3‐substituted N‐alkylated AZON3, which demonstrates excellent solubility at neutral pH (1.64 m) with two low reversible redox potentials (−0.31 and −0.58 V vs Ag/AgCl). AZON3 exhibits high stability when evaluated at high concentration in a neutral supporting electrolyte (1 m in 3 m KCl), paired with BTMAP‐Fc on the positive side. Capacity retentions of 99.95% and 99.91% per cycle (99.35% and 99.21% per day) are achieved when cycling with 1 and 2 electrons, respectively, coupled with high volumetric capacity of 46.4 Ah L−1 (87% of capacity utilization).


  • Open Access

    Expanding sample volume for microscopical detection of nanoplastics

    by Arto Hiltunen, Joona Huopalainen, Ermei Mäkilä, Sirkku Häkkilä, Pia Damlin, Jari Hänninen

    The extent of nanoplastic pollution has raised severe environmental and health concerns. While the means for microplastic detection are abundant, improved tools for nanoplastic detection are called-for. State- of-the-art microscopic techniques can detect nanoplastics down to tens of nanometers, however, only from very small sample sizes (typically ∼10 µl). In this work, we describe a method that enables sampling of 1 liter of seawater by the means of correlative Raman- and SEM-techniques. This is achieved by adapting common microplastic sample purification protocols (i.e. chemical digestion) to suit the nanoplastic study. In addition, we decorate a membrane filter with SERS-property to amplify the Raman signals. Together, the purification method combined with the use of the SERS-activated-membrane-filter enables identification and imaging of individual nanoplastic particles from significantly larger sample sizes than before. In the nanoscale the average recovery rate is 5 %. These results aim to provide useful tools for researchers in the fight against plastic pollution.

  • Open Access

    Optoelectronic enhancement of photocurrent by cyanobacteria on sustainable AP-VPP-fabricated PEDOT electrodes

    by Laura T. Wey, Rahul Yewale, Emilia Hautala, Jenna Hannonen, Kalle Katavisto, Carita Kvarnström, Yagut Allahverdiyeva, Pia Damlin


  • Open Access

    Optoelectronic enhancement of photocurrent by cyanobacteria on sustainable AP-VPP-fabricated PEDOT electrodes

    by Laura T. Wey, Rahul Yewale, Emilia Hautala, Jenna Hannonen, Kalle Katavisto, Carita Kvarnström, Yagut Allahverdiyeva, Pia Damlin

    Photosynthetic microrganisms, including cyanobacteria, can be interfaced with electrodes in biophotovoltaic devices (BPVs) for solar energy conversion. Effective BPV electrodes need to be conductive, transparent, flexible, biocompatible and environmentally friendly, while also being cost-effective, abundant in material and lightweight. The utilization of electrically conducting polymers (CPs), particularly poly(3,4-ethylenedioxythiophene) (PEDOT) fabricated by an atmospheric pressure vapor phase polymerization (AP-VPP) technique, is a promising avenue for BPV applications. However, challenges remain in optimising their performance as CPs are dynamic optoelectronic materials, and their interaction with photosynthetic biocatalysts under a range of conditions has not been explored thoroughly. Here we show that AP-VPP-PEDOT electrodes hold promise for interfacing with cyanobacteria in BPVs to generate green electricity under red and blue light and moderate applied potentials with exogenous electron mediators. The highest non-mediated photocurrent achieved was 0.48 µA cm −2 , with a two-layer PEDOT electrode at 0.5 V applied potential and blue light. The highest mediated photocurrent achieved was 2.73 µA cm −2 , with a one-layer PEDOT electrode at 0.3 V applied potential and blue light and the exogenous electron mediator 2,6-dichloro-1,4-benzoquinone (DCBQ). The proposed approach to fabricating PEDOT electrodes offers a new pathway for developing sustainable electrodes for BPVs and pinpoints strategies for future optimisation for achieving high-performance outcomes. Abstract Figure:

  • Open Access

    Affinity of Tannins to Cellulose: A Chromatographic Tool for Revealing Structure-Activity Patterns

    by Essi Suominen, Santeri Savila, Mimosa Sillanpää, Pia Damlin, Maarit Karonen

    Food, feed and beverage processing brings tannins into contact with macromolecules, such as proteins and polysaccharides, leading to different chemical and physical interactions. The interactions of tannins with proteins are well known but less is known about the affinity of tannins to polysaccharides. We used bacterial cellulose from nata de coco as a model compound to investigate how tannins and cellulose interact by adsorption measurements using UPLC-DAD. We also explored how the structure of tannins influences these interactions. The model tannins included nine individual structurally different hydrolysable tannins (HTs) and eight well-defined proanthocyanidin (PA) fractions with different monomeric units, mean degree of polymerization and both A- and B-type linkages. Tannins were found to have both strong and weak interactions with bacterial cellulose, depending on the exact structure of the tannin. For HTs, the main structural features affecting the interactions were the structural flexibility of the HT molecule and the number of free galloyl groups. For PAs, prodelphinidins were found to have a higher affinity to cellulose than procyanidins. Similarly to HTs, the presence of free galloyl groups in galloylated PAs and the flexibility of the PA molecule led to a stronger interaction. Adsorption measurements by UPLC-DAD proved to be a sensitive and rapid tool to evaluate the affinity of tannins to cellulose.


  • Open Access

    Effect of Oxidants on Properties of Electroactive Ultrathin Polyazulene Films Synthesized by Vapor Phase Polymerization at Atmospheric Pressure

    by Rahul Yewale, Pia Damlin, Carita Kvarnström

    A non-benzenoid aromatic hydrocarbon azulene, naturally found in plants and mushrooms, is known for its derivatives applications in medicines. However, the processability of its chemically synthesized high-capacitance polymer is constrained by the sparingly soluble nature of its polymeric form. Oxidative chemical synthesis on a desirable substrate overcomes this difficulty. In this report, polyazulene (PAz) thin films are synthesized by vapor phase polymerization at atmospheric pressure using oxidants, such as CuCl2, CuBr2, FeCl3, and FeTOS. The effect of oxidants on morphologies of PAz films is studied using atomic force microscopy and microscope imaging. Each oxidant produced distinct microstructures in the films. The films synthesized using Cu(II) salts showed organized and knitted structures, whereas Fe(III) salts formed casted sheet-like disordered arrangements. The films synthesized using CuCl2 created uniform porous film assemblies. The pre-peak formations and their splitting observed in the cyclic voltammograms revealed phase segregations in the films. Oxidant-dependent structural and chemical differences such as charge carrier formation, doping levels, and polymer chain length in the PAz films are studied by using UV-Vis and FTIR spectroscopy. The results indicated that 240 and 180 mM are the optimum concentration of CuCl2 to produce high capacitance and well-organized single- and triple-layered PAz films, respectively.


  • Open Access

    Synthesis and Features of Luminescent Bromo- and Iodohectorite Nanoclay Materials

    by Hellen Silva Santos, Isabella Norrbo, Tero Laihinen, Jari Sinkkonen, Ermei Mäkilä, José M. Carvalho, Pia Damlin, Hermi F. Brito, Jorma Hölsä, Mika Lastusaari

    The smectites represent a versatile class of clay minerals with broad usage in industrial applications, e.g., cosmetics, drug delivery, bioimaging, etc. Synthetic hectorite Na0.7(Mg5.5Li0.3)[Si8O20](OH)4 is a distinct material from this class due to its low-cost production method that allows to design its structure to match better the applications. In the current work, we have synthesized for the first time ever nanoclay materials based on the hectorite structure but with the hydroxyl groups (OH−) replaced by Br− or I−, yielding bromohectorite (Br-Hec) and iodohectorite (I-Hec). It was aimed that these materials would be used as phosphors. Thus, OH− replacement was done to avoid luminescence quenching by multiphonon de-excitation. The crystal structure is similar to nanocrystalline fluorohectorite, having the d001 spacing of 14.30 Å and 3 nm crystallite size along the 00l direction. The synthetic materials studied here show strong potential to act as host lattices for optically active species, possessing mesoporous structure with high specific surface area (385 and 363 m2 g−1 for Br-Hec and I-Hec, respectively) and good thermal stability up to 800 °C. Both materials also present strong blue-green emission under UV radiation and short persistent luminescence (ca. 5 s). The luminescence features are attributed to Ti3+/TiIV impurities acting as the emitting center in these materials.


  • In situ FTIR and Raman spectroelectrochemical characterization of graphene oxide upon electrochemical reduction in organic solvents

    by Antti Viinikanoja, Jussi Kauppila, Pia Damlin, Milla Suominen, Carita Kvarnström

    Electrochemical reduction of solution cast and self-assembled graphene oxide (GO) films on Au surfaces were studied using organic solvents. During the cyclic voltammetry measurements the structural changes in the films were recorded focusing on in situ infrared and Raman techniques. Both FT-Raman and dispersive Raman spectroscopy were utilized for the reduction studies. The spectroelectrochemical results indicate that the changes in the GO structure take place in a quite narrow potential range extending from −1 to −1.7 V. Higher negative potentials gives rise to reversible changes in the spectra and are not due to reduction processes of GO but more related to changes in the electrolyte media.