Seunghyun Lim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Seunghyun Lim has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Dongwon Yun
Daegu Gyeongbuk Institute of Science and Technology (DGIST)
6 shared publications - Jinhyeok Song
Department of Robotics and Mechatronics Engineering Daegu Gyeongbuk Institute of Science and Technology (DGIST) Daegu 42988 Republic of Korea
3 shared publications - Junmo Yang
Yeungnam University
2 shared publications Geonhee Sim
College of Transdisciplinary Studies, DGIST, Daegu, Republic of Korea
1 shared publicationGwanjun Shin
Interdisciplinary Program in Artificial Intelligence, Seoul National University, Seoul, Republic of Korea
1 shared publication- Jeyoung Park
Daegu Gyeongbuk Institute of Science and Technology (DGIST)
1 shared publication
Latest Publications
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (10) , 12136-12143
3-DoF Snake Robot Head Stabilization for Visual Navigation Using a Coaxial Spherical Parallel Manipulator
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (10) , 12136-12143
3-DoF Snake Robot Head Stabilization for Visual Navigation Using a Coaxial Spherical Parallel Manipulator
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (10) , 12144-12151
mono-MORP: Monocular Traversability Representation and Motion Planner for Topological Visual Navigation
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (10) , 12144-12151
mono-MORP: Monocular Traversability Representation and Motion Planner for Topological Visual Navigation
- Open Access
- 19 June 2024
- Published by Wiley in Advanced Intelligent Systems
- Vol. 6 (11) , 2400131
Development of Flexure‐Based Supernumerary Robotic Finger for Hand Function Augmentation
This study introduces a flexure‐based supernumerary robotic finger (FBSF) inspired by the proportions of the human thumb, aiming to overcome existing limitations in robotic finger design. In pursuit of seamless cooperation with the user's hand, human finger proportions are replicated. Finite element analysis of all five fingers indicates that the thumb‐mimicking configuration offers the largest workspace and bending angle. The FBSF, featuring a polycarbonate paired crossed flexural hinge structure and high impact polystyrene links, closely mirrors the human thumb. Weighing 59 g (main body) and 170 g (control box), the FBSF enables user‐driven control and decoupled actuation based on user intent, utilizing the electromyographic signal of the extensor carpi ulnaris via isometric contractions. An experimental protocol, including task blocks (releasing, clenching), confirms the FBSF's responsiveness to user intentions. When utilizing FBSF, it has been verified using a motion capture camera system that it is possible to extend the existing hand workspace by approximately 29.72%. Performance tests demonstrate the FBSF's capability to grasp various objects and assist in tasks, with a maximum load‐bearing capacity of 2.6 kg experimentally verified. This study demonstrates the potential of the developed FBSF to augment hand functionality in diverse applications.
- 19 June 2024
- Published by Wiley in Advanced Intelligent Systems
- Vol. 6 (11) , 2400131
Open AccessDevelopment of Flexure‐Based Supernumerary Robotic Finger for Hand Function Augmentation
This study introduces a flexure‐based supernumerary robotic finger (FBSF) inspired by the proportions of the human thumb, aiming to overcome existing limitations in robotic finger design. In pursuit of seamless cooperation with the user's hand, human finger proportions are replicated. Finite element analysis of all five fingers indicates that the thumb‐mimicking configuration offers the largest workspace and bending angle. The FBSF, featuring a polycarbonate paired crossed flexural hinge structure and high impact polystyrene links, closely mirrors the human thumb. Weighing 59 g (main body) and 170 g (control box), the FBSF enables user‐driven control and decoupled actuation based on user intent, utilizing the electromyographic signal of the extensor carpi ulnaris via isometric contractions. An experimental protocol, including task blocks (releasing, clenching), confirms the FBSF's responsiveness to user intentions. When utilizing FBSF, it has been verified using a motion capture camera system that it is possible to extend the existing hand workspace by approximately 29.72%. Performance tests demonstrate the FBSF's capability to grasp various objects and assist in tasks, with a maximum load‐bearing capacity of 2.6 kg experimentally verified. This study demonstrates the potential of the developed FBSF to augment hand functionality in diverse applications.
- Open Access
- 16 May 2024
- Published by Wiley in Advanced Intelligent Systems
- Vol. 6 (5)
A Study on the Effect of Belly‐Dragging Locomotion on a Robot that Mimics a Heavy Reptile
- 16 May 2024
- Published by Wiley in Advanced Intelligent Systems
- Vol. 6 (5)
Open AccessA Study on the Effect of Belly‐Dragging Locomotion on a Robot that Mimics a Heavy Reptile
- Open Access
- 8 March 2024
- Published by Wiley in Advanced Intelligent Systems
- Vol. 6 (5)
A Study on the Effect of Belly‐Dragging Locomotion on a Robot that Mimics a Heavy Reptile
This study investigates the effect of tortoise‐inspired locomotion on enhancing energy efficiency in legged robots. Tortoises, known for their high locomotion efficiency, provide a unique model for robot and gait design, where their specific gait and posture significantly contribute to energy efficiency. This study hypothesizes that the gait and belly‐dragging posture of tortoises can improve the energy efficiency of robots. To test this hypothesis, a quadruped robot mimicking these tortoise characteristics is developed, utilizing the cost of transport (CoT) as a measure of energy efficiency. Dynamic simulations and real‐world experiments are conducted, varying parameters like robot size, mass, friction coefficient, and Froude number, to validate the generality of the findings. The results indicate that both belly dragging, a postural characteristic of tortoises, and their diagonal gait significantly lower the robot's CoT. This suggests that the energy‐efficient locomotion of tortoises, specifically the diagonal gait with belly dragging, is transferable to robotic platforms to enhance energy efficiency. The tortoise‐inspired robot design offers significant potential in applications such as search and rescue operations, space exploration, and payload transportation. Furthermore, the tortoise‐inspired locomotion strategy can be effectively integrated with other research focusing on energy efficiency improvements through mechanical structures or control strategies.
- 8 March 2024
- Published by Wiley in Advanced Intelligent Systems
- Vol. 6 (5)
Open AccessA Study on the Effect of Belly‐Dragging Locomotion on a Robot that Mimics a Heavy Reptile
This study investigates the effect of tortoise‐inspired locomotion on enhancing energy efficiency in legged robots. Tortoises, known for their high locomotion efficiency, provide a unique model for robot and gait design, where their specific gait and posture significantly contribute to energy efficiency. This study hypothesizes that the gait and belly‐dragging posture of tortoises can improve the energy efficiency of robots. To test this hypothesis, a quadruped robot mimicking these tortoise characteristics is developed, utilizing the cost of transport (CoT) as a measure of energy efficiency. Dynamic simulations and real‐world experiments are conducted, varying parameters like robot size, mass, friction coefficient, and Froude number, to validate the generality of the findings. The results indicate that both belly dragging, a postural characteristic of tortoises, and their diagonal gait significantly lower the robot's CoT. This suggests that the energy‐efficient locomotion of tortoises, specifically the diagonal gait with belly dragging, is transferable to robotic platforms to enhance energy efficiency. The tortoise‐inspired robot design offers significant potential in applications such as search and rescue operations, space exploration, and payload transportation. Furthermore, the tortoise‐inspired locomotion strategy can be effectively integrated with other research focusing on energy efficiency improvements through mechanical structures or control strategies.
- Open Access
- 5 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 127871-127881
An Open-Source Low-Cost Mobile Robot System With an RGB-D Camera and Efficient Real-Time Navigation Algorithm
Currently, mobile robots are developing rapidly and are finding numerous applications in the industry. However, several problems remain related to their practical use, such as the need for expensive hardware and high power consumption levels. In this study, we build a low-cost indoor mobile robot platform that does not include a LiDAR or a GPU. Then, we design an autonomous navigation architecture that guarantees real-time performance on our platform with an RGB-D camera and a low-end off-the-shelf single board computer. The overall system includes SLAM, global path planning, ground segmentation, and motion planning. The proposed ground segmentation approach extracts a traversability map from raw depth images for the safe driving of low-body mobile robots. We apply both rule-based and learning-based navigation policies using the traversability map. Running sensor data processing and other autonomous driving components simultaneously, our navigation policies perform rapidly at a refresh rate of 18 Hz for control command, whereas other systems have slower refresh rates. Our methods show better performances than current state-of-the-art navigation approaches within limited computation resources as shown in 3D simulation tests. In addition, we demonstrate the applicability of our mobile robot system through successful autonomous driving in an indoor environment.
- 5 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 127871-127881
Open AccessAn Open-Source Low-Cost Mobile Robot System With an RGB-D Camera and Efficient Real-Time Navigation Algorithm
Currently, mobile robots are developing rapidly and are finding numerous applications in the industry. However, several problems remain related to their practical use, such as the need for expensive hardware and high power consumption levels. In this study, we build a low-cost indoor mobile robot platform that does not include a LiDAR or a GPU. Then, we design an autonomous navigation architecture that guarantees real-time performance on our platform with an RGB-D camera and a low-end off-the-shelf single board computer. The overall system includes SLAM, global path planning, ground segmentation, and motion planning. The proposed ground segmentation approach extracts a traversability map from raw depth images for the safe driving of low-body mobile robots. We apply both rule-based and learning-based navigation policies using the traversability map. Running sensor data processing and other autonomous driving components simultaneously, our navigation policies perform rapidly at a refresh rate of 18 Hz for control command, whereas other systems have slower refresh rates. Our methods show better performances than current state-of-the-art navigation approaches within limited computation resources as shown in 3D simulation tests. In addition, we demonstrate the applicability of our mobile robot system through successful autonomous driving in an indoor environment.