Letícia Gracyelle Alexandre Costa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Letícia Gracyelle Alexandre Costa has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Carlos Alberto Martinez Huitle
Renewable Energies and Environmental Sustainability Research Group Institute of Chemistry Federal University of Rio Grande do Norte Natal Rio Grande do Norte Brazil
4 shared publications - Elisama Vieira dos Santos
Renewable Energies and Environmental Sustainability Research Group Institute of Chemistry Federal University of Rio Grande do Norte Natal Rio Grande do Norte Brazil
3 shared publications - Sergio Ferro
Ecas4 Australia Pty, Ltd., Mile End South, SA 5031, Australia
2 shared publications - Amanda Duarte Gondim
Institute of Chemistry, Federal University of Rio Grande do Norte, Natal 59078-970, RN, Brazil
1 shared publication - Aruzza Mabel de Morais Araújo
Renewable Energies and Environmental Sustainability Research Group, Institute of Chemistry, Federal University of Rio Grande do Norte, Campus Universitário, Av. Salgado Filho 3000, Lagoa Nova, Natal CEP 59078-970, RN, Brazil
1 shared publication - Djalma Ribeiro da Silva
Universidade Federal do Rio Grande do Norte
1 shared publication
Latest Publications
- Open Access
Effective Endotoxin Reduction in Hospital Reverse Osmosis Water Using eBooster™ Electrochemical Technology
Endotoxins, lipopolysaccharides released from the outer membrane of Gram-negative bacteria, pose a significant risk in healthcare environments, particularly in Central Sterile Supply Departments (CSSDs), where the delivery of sterile pyrogen-free medical devices is critical for patient safety. Traditional methods for controlling endotoxins in water systems, such as ultraviolet (UV) disinfection, have proven ineffective at reducing endotoxin concentrations to comply with regulatory standards (90% endotoxin reduction (from 1.2 EU/mL to 2. Additional real-world testing at three hospitals showed that the eBooster™ unit, when installed in the RO tank recirculation loop, consistently reduced endotoxin levels from 0.76 EU/mL (with UV) to eBooster™ demonstrated superior performance in low-conductivity environments without added chemicals or significant maintenance. These findings highlight the strength and novelty of eBooster™ as a reliable, chemical-free, and maintenance-friendly alternative to traditional UV disinfection systems, offering a promising solution for critical water treatment applications in healthcare environments.
Open AccessEffective Endotoxin Reduction in Hospital Reverse Osmosis Water Using eBooster™ Electrochemical Technology
Endotoxins, lipopolysaccharides released from the outer membrane of Gram-negative bacteria, pose a significant risk in healthcare environments, particularly in Central Sterile Supply Departments (CSSDs), where the delivery of sterile pyrogen-free medical devices is critical for patient safety. Traditional methods for controlling endotoxins in water systems, such as ultraviolet (UV) disinfection, have proven ineffective at reducing endotoxin concentrations to comply with regulatory standards (90% endotoxin reduction (from 1.2 EU/mL to 2. Additional real-world testing at three hospitals showed that the eBooster™ unit, when installed in the RO tank recirculation loop, consistently reduced endotoxin levels from 0.76 EU/mL (with UV) to eBooster™ demonstrated superior performance in low-conductivity environments without added chemicals or significant maintenance. These findings highlight the strength and novelty of eBooster™ as a reliable, chemical-free, and maintenance-friendly alternative to traditional UV disinfection systems, offering a promising solution for critical water treatment applications in healthcare environments.
- Open Access
- 14 May 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (10) , 5504
Comparison of Chromatographic and Electrochemical Methods for Detecting and Quantifying Sunscreen Agents and Their Degradation Products in Water Matrices
Comparing electroanalysis and chromatography, this study highlights that electroanalysis, specifically using a glassy carbon sensor (GCS), is the most appropriate choice for quantifying recalcitrant organic compounds. Octocrylene (OC), an organic compound commonly found in sunscreens, is of particular concern in swimming pool water monitoring, as its presence above legal limits poses health risks. OC quantification was performed using both high performance liquid chromatography (HPLC) and electroanalysis in sunscreen formulations and water matrices. The limits of detection (LODs) and quantification (LOQ) for OC were approximately 0.11 ± 0.01 mg L−1 and 0.86 ± 0.04 mg L−1 by electroanalysis, and 0.35 ± 0.02 mg L−1 and 2.86 ± 0.12 mg L−1 by HPLC. Electroanalysis successfully quantified OC in real sunscreen samples, and the results were comparable to those obtained by HPLC. The matrices tested—swimming pool water and distilled water (containing 0.002 M Cl−) contaminated with 0.4 ± 0.2 g L−1 of sunscreen (based on a maximum concentration in sunscreen and cosmetic formulations of 10%)—showed OC concentrations below 10% in the formulation, with no significant differences observed between the two techniques. GCS was further utilized to monitor OC degradation via anodic oxidation at current densities of 5 and 10 mA cm−2, using a boron-doped diamond (BDD) anode. The combined approach demonstrated high efficacy in both detecting and eliminating OC from various water matrices, making it a reliable and efficient alternative for environmental and water quality monitoring.
- 14 May 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (10) , 5504
Open AccessComparison of Chromatographic and Electrochemical Methods for Detecting and Quantifying Sunscreen Agents and Their Degradation Products in Water Matrices
Comparing electroanalysis and chromatography, this study highlights that electroanalysis, specifically using a glassy carbon sensor (GCS), is the most appropriate choice for quantifying recalcitrant organic compounds. Octocrylene (OC), an organic compound commonly found in sunscreens, is of particular concern in swimming pool water monitoring, as its presence above legal limits poses health risks. OC quantification was performed using both high performance liquid chromatography (HPLC) and electroanalysis in sunscreen formulations and water matrices. The limits of detection (LODs) and quantification (LOQ) for OC were approximately 0.11 ± 0.01 mg L−1 and 0.86 ± 0.04 mg L−1 by electroanalysis, and 0.35 ± 0.02 mg L−1 and 2.86 ± 0.12 mg L−1 by HPLC. Electroanalysis successfully quantified OC in real sunscreen samples, and the results were comparable to those obtained by HPLC. The matrices tested—swimming pool water and distilled water (containing 0.002 M Cl−) contaminated with 0.4 ± 0.2 g L−1 of sunscreen (based on a maximum concentration in sunscreen and cosmetic formulations of 10%)—showed OC concentrations below 10% in the formulation, with no significant differences observed between the two techniques. GCS was further utilized to monitor OC degradation via anodic oxidation at current densities of 5 and 10 mA cm−2, using a boron-doped diamond (BDD) anode. The combined approach demonstrated high efficacy in both detecting and eliminating OC from various water matrices, making it a reliable and efficient alternative for environmental and water quality monitoring.
- Open Access
Electro-Refinery in Organics to Produce Energy Carriers: Co-Generation of Green Hydrogen and Carboxylic Acids by Glycerol Electrooxidation Using Dimensionally Stable Anode
The urgency to decarbonize fuels has contributed to a rise in biofuel production, which has culminated in a significant increase in the waste quantity of glycerol produced. Therefore, to convert glycerol waste into high-value products, electrochemical oxidation (EO) is a viable alternative for the co-generation of carboxylic acids, such as formic acid (FA) and green hydrogen (H2), which are considered energy carriers. The aim of this study is the electroconversion of glycerol into FA by EO using a divided electrochemical cell, driven by a photovoltaic (PV) system, with a dimensionally stable anode (DSA, Ti/TiO2-RuO2-IrO2) electrode as an anode and Ni-Fe stainless steel (SS) mesh as a cathode. To optimize the experimental conditions, studies were carried out evaluating the effects of applied current density (j), electrolyte concentration, electrolysis time, and electrochemical cell configuration (undivided and divided). According to the results, the optimum experimental conditions were achieved at 90 mA cm−2, 0.1 mol L−1 of Na2SO4 as a supporting electrolyte, and 480 min of electrolysis. In this condition, 256.21 and 211.17 mg L−1 of FA were obtained for the undivided and divided cells, respectively, while the co-generation of 6.77 L of dry H2 was achieved in the divided cell. The electroconversion process under the optimum conditions was also carried out with a real sample, where organic acids like formic and acetic acids were co-produced simultaneously with green H2. Based on the preliminary economic analysis, the integrated-hybrid process is an economically viable and promising alternative when it is integrated with renewable energy sources such as solar energy.
Open AccessElectro-Refinery in Organics to Produce Energy Carriers: Co-Generation of Green Hydrogen and Carboxylic Acids by Glycerol Electrooxidation Using Dimensionally Stable Anode
The urgency to decarbonize fuels has contributed to a rise in biofuel production, which has culminated in a significant increase in the waste quantity of glycerol produced. Therefore, to convert glycerol waste into high-value products, electrochemical oxidation (EO) is a viable alternative for the co-generation of carboxylic acids, such as formic acid (FA) and green hydrogen (H2), which are considered energy carriers. The aim of this study is the electroconversion of glycerol into FA by EO using a divided electrochemical cell, driven by a photovoltaic (PV) system, with a dimensionally stable anode (DSA, Ti/TiO2-RuO2-IrO2) electrode as an anode and Ni-Fe stainless steel (SS) mesh as a cathode. To optimize the experimental conditions, studies were carried out evaluating the effects of applied current density (j), electrolyte concentration, electrolysis time, and electrochemical cell configuration (undivided and divided). According to the results, the optimum experimental conditions were achieved at 90 mA cm−2, 0.1 mol L−1 of Na2SO4 as a supporting electrolyte, and 480 min of electrolysis. In this condition, 256.21 and 211.17 mg L−1 of FA were obtained for the undivided and divided cells, respectively, while the co-generation of 6.77 L of dry H2 was achieved in the divided cell. The electroconversion process under the optimum conditions was also carried out with a real sample, where organic acids like formic and acetic acids were co-produced simultaneously with green H2. Based on the preliminary economic analysis, the integrated-hybrid process is an economically viable and promising alternative when it is integrated with renewable energy sources such as solar energy.
- Open Access
Application of a Zero-Valent Iron/Cork as Permeable Reactive Barrier for In Situ Remediation of Phenanthrene in Soil
This paper proposes an eco-efficient treatment technology for removing phenanthrene (PHE) from kaolinite soil, incorporating a permeable reactive barrier (PRB) in an electrokinetic (EK) remediation system, which was made by modifying the granulated cork (GC) with Fe@Fe2O3, identified as EK/Fe@Fe2O3/GC. The novel product Fe@Fe2O3/GC was characterized by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray analysis, and element mapping. EK tests were conducted to investigate the performance of the EK/Fe@Fe2O3/GC for removal of PHE from soil. The results showed that PHE was driven by the electro-osmotic flow toward the cathode and reacted with the EK/Fe@Fe2O3/GC. Further, the removal efficiency of PHE in the soil was higher in the presence of H2O2 due to the additional reactions achieved. The results were discussed in light of the existing literature.
Open AccessApplication of a Zero-Valent Iron/Cork as Permeable Reactive Barrier for In Situ Remediation of Phenanthrene in Soil
This paper proposes an eco-efficient treatment technology for removing phenanthrene (PHE) from kaolinite soil, incorporating a permeable reactive barrier (PRB) in an electrokinetic (EK) remediation system, which was made by modifying the granulated cork (GC) with Fe@Fe2O3, identified as EK/Fe@Fe2O3/GC. The novel product Fe@Fe2O3/GC was characterized by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray analysis, and element mapping. EK tests were conducted to investigate the performance of the EK/Fe@Fe2O3/GC for removal of PHE from soil. The results showed that PHE was driven by the electro-osmotic flow toward the cathode and reacted with the EK/Fe@Fe2O3/GC. Further, the removal efficiency of PHE in the soil was higher in the presence of H2O2 due to the additional reactions achieved. The results were discussed in light of the existing literature.