Neetu Goel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Neetu Goel has a total of 70 co-authors. Here are the top co-authors by number of shared publications:
Mayank Khera
Department of Chemistry and Biochemistry, Thapar Institute of Engineering and Technology, Patiala, India
8 shared publicationsNavjot Kaur
Faculty of Science, SGT University, Gurugram 122505, India
8 shared publicationsSonam
8 shared publicationsSonal Singhal
Theoretical and Computational Chemistry Group Department of Chemistry Centre of Advanced Studies in Chemistry Panjab University Chandigarh 160014 India
7 shared publications- Shivangi Garg
Wrocław University of Science and Technology
6 shared publications - Sonal Singhal
Department of Chemistry, Panjab University, Chandigarh 160014, India
6 shared publications
Latest Publications
- 5 October 2026
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 50 (38) , 16486-16497
First-principles investigation of CrS 2 monolayer as promising anode material for rechargeable aluminium-ion batteries
A comprehensive first-principles investigation uncovers the Al-storage characteristics of the 2H-CrS 2 monolayer, highlighting its high storage capacity, fast diffusion kinetics, reasonable average OCV, and robust structural stability.
- 5 October 2026
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 50 (38) , 16486-16497
First-principles investigation of CrS 2 monolayer as promising anode material for rechargeable aluminium-ion batteries
A comprehensive first-principles investigation uncovers the Al-storage characteristics of the 2H-CrS 2 monolayer, highlighting its high storage capacity, fast diffusion kinetics, reasonable average OCV, and robust structural stability.
- 6 April 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
From screening to stepwise lithiation: computational insights into Fe-porphyrin for Li-ion batteries
Computational screening reveals Fe-porphyrin as an efficient Li-storage framework, accommodating up to seven Li atoms (515 mAh g-1) with progressive band-gap collapse and enhanced conductivity. Energy decomposition and topological analyses identify cooperative ionic-dispersive interactions governing stepwise lithiation, highlighting Fe-porphyrin as a promising molecular electrode for lithium-ion batteries.
- 6 April 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
From screening to stepwise lithiation: computational insights into Fe-porphyrin for Li-ion batteries
Computational screening reveals Fe-porphyrin as an efficient Li-storage framework, accommodating up to seven Li atoms (515 mAh g-1) with progressive band-gap collapse and enhanced conductivity. Energy decomposition and topological analyses identify cooperative ionic-dispersive interactions governing stepwise lithiation, highlighting Fe-porphyrin as a promising molecular electrode for lithium-ion batteries.
- 25 February 2026
- Published by Springer Nature in Journal of Chemical Sciences
- Vol. 138 (1) , 19
Weaker noncovalent interactions of second transition metal series: A density functional study
- 25 February 2026
- Published by Springer Nature in Journal of Chemical Sciences
- Vol. 138 (1) , 19
Weaker noncovalent interactions of second transition metal series: A density functional study
- 5 January 2026
- Published by Wiley in ChemistrySelect
- Vol. 11 (1)
Density Functional Study on Interactions of Ti‐Porphyrin and its Derivative With Pharmaceutical Drugs for Wastewater Remediation
Pharmaceutical pollutants pose a significant environmental threat due to their persistence in water bodies and potential ecological hazards. This study explores the adsorption and sensing capabilities of titanium porphyrin (TP) and its carboxyphenyl‐functionalized derivative (TCP) for removing four pharmaceutical drugs: 5‐fluorouracil (5‐FU), metronidazole (MNZ), flutamide (FLU), and favipiravir (FVR). Using Density Functional Theory (DFT) calculations, key adsorption parameters, such as adsorption energy, charge transfer, and electronic structure modifications, were analyzed to understand drug‐adsorbent interactions. The results demonstrate that both TP and TCP exhibit strong adsorption affinities, with TCP showing enhanced performance as the functional groups facilitate additional interactions between the drug and the porphyrin system. Quantum theory of atoms in molecules (QTAIM) and non‐covalent interaction (NCI) analysis confirm the presence of significant charge redistribution and stabilizing interactions. Moreover, solvation studies confirm the stability and efficiency of TP and TCP in aqueous environments, reinforcing its potential as a promising adsorbent for pharmaceutical pollutants. The observed red shift in absorbance spectra for all investigated drugs by applying the TD‐DFT approach corroborate the sensing performance of TP and its functionalized derivative.
- 5 January 2026
- Published by Wiley in ChemistrySelect
- Vol. 11 (1)
Density Functional Study on Interactions of Ti‐Porphyrin and its Derivative With Pharmaceutical Drugs for Wastewater Remediation
Pharmaceutical pollutants pose a significant environmental threat due to their persistence in water bodies and potential ecological hazards. This study explores the adsorption and sensing capabilities of titanium porphyrin (TP) and its carboxyphenyl‐functionalized derivative (TCP) for removing four pharmaceutical drugs: 5‐fluorouracil (5‐FU), metronidazole (MNZ), flutamide (FLU), and favipiravir (FVR). Using Density Functional Theory (DFT) calculations, key adsorption parameters, such as adsorption energy, charge transfer, and electronic structure modifications, were analyzed to understand drug‐adsorbent interactions. The results demonstrate that both TP and TCP exhibit strong adsorption affinities, with TCP showing enhanced performance as the functional groups facilitate additional interactions between the drug and the porphyrin system. Quantum theory of atoms in molecules (QTAIM) and non‐covalent interaction (NCI) analysis confirm the presence of significant charge redistribution and stabilizing interactions. Moreover, solvation studies confirm the stability and efficiency of TP and TCP in aqueous environments, reinforcing its potential as a promising adsorbent for pharmaceutical pollutants. The observed red shift in absorbance spectra for all investigated drugs by applying the TD‐DFT approach corroborate the sensing performance of TP and its functionalized derivative.
- 12 December 2025
- Published by American Chemical Society (ACS) in Langmuir
Adsorption and Sensing of Cyanide Gases over Transition Metal (Mn and Fe)-Decorated CrS 2 Monolayers: Insights from DFT and AIMD Simulations
The present study proposes to comprehensively investigate the adsorption of toxic cyanide gases (HCN, CNF, CNCl, CNBr, and NCCN) on pristine and transition-metal (TM)-decorated CrS2 monolayers using van der Waals-corrected density functional theory. The weak adsorption capability of pristine CrS2 renders it unsuitable for use as a gas sensor; therefore, the monolayer was decorated with TMs, Mn, and Fe. Among the plausible decoration sites, TMs prefer to bind on the TCr site of the CrS2. The energetic stability of the modified monolayers is ensured by high negative values of binding energies, i.e., -5.530 eV for Mn and -5.358 eV for Fe-CrS2. The Mn and Fe decoration significantly improves the surface activity of the intrinsic CrS2 by reducing the band gap (0.080 eV for Mn and 0.610 eV for Fe) and work function (4.945 eV for Mn and 5.173 eV for Fe). Compared with pristine CrS2, the gas adsorption energy of the modified monolayers is greatly improved, and the adsorption distance is enormously reduced, indicating that modification of the monolayer with the TMs enhances the gas sensitivity of CrS2 for toxic cyanide gases. The adsorption energy order is CNBr > CNF > NCCN > CNCl > HCN and NCCN > CNBr > CNF > CNCl > HCN for Mn and Fe-CrS2 monolayers, respectively. The adsorption effects of the target gases were compared and analyzed from the perspectives of the change of band gap, charge density difference, energy band structures, and partial density of states plots. The efficacy of the decorated monolayers for gas sensing was assessed in terms of work function, recovery time, and sensitivity measurements. The comparative analysis revealed that the Mn-CrS2 exhibits high adsorption strength and hence prolonged recovery times for the cyanide gases, signifying its potential as an effective adsorbent. On the contrary, the Fe-CrS2 monolayer shows optimum adsorption strength and faster recovery behavior, emerging as a reusable gas sensor. Overall, this study provides a theoretical framework and opens up new avenues for the design and experimental investigation of high-performance CrS2-based gas sensors to detect hazardous cyanide gases.
- 12 December 2025
- Published by American Chemical Society (ACS) in Langmuir
Adsorption and Sensing of Cyanide Gases over Transition Metal (Mn and Fe)-Decorated CrS 2 Monolayers: Insights from DFT and AIMD Simulations
The present study proposes to comprehensively investigate the adsorption of toxic cyanide gases (HCN, CNF, CNCl, CNBr, and NCCN) on pristine and transition-metal (TM)-decorated CrS2 monolayers using van der Waals-corrected density functional theory. The weak adsorption capability of pristine CrS2 renders it unsuitable for use as a gas sensor; therefore, the monolayer was decorated with TMs, Mn, and Fe. Among the plausible decoration sites, TMs prefer to bind on the TCr site of the CrS2. The energetic stability of the modified monolayers is ensured by high negative values of binding energies, i.e., -5.530 eV for Mn and -5.358 eV for Fe-CrS2. The Mn and Fe decoration significantly improves the surface activity of the intrinsic CrS2 by reducing the band gap (0.080 eV for Mn and 0.610 eV for Fe) and work function (4.945 eV for Mn and 5.173 eV for Fe). Compared with pristine CrS2, the gas adsorption energy of the modified monolayers is greatly improved, and the adsorption distance is enormously reduced, indicating that modification of the monolayer with the TMs enhances the gas sensitivity of CrS2 for toxic cyanide gases. The adsorption energy order is CNBr > CNF > NCCN > CNCl > HCN and NCCN > CNBr > CNF > CNCl > HCN for Mn and Fe-CrS2 monolayers, respectively. The adsorption effects of the target gases were compared and analyzed from the perspectives of the change of band gap, charge density difference, energy band structures, and partial density of states plots. The efficacy of the decorated monolayers for gas sensing was assessed in terms of work function, recovery time, and sensitivity measurements. The comparative analysis revealed that the Mn-CrS2 exhibits high adsorption strength and hence prolonged recovery times for the cyanide gases, signifying its potential as an effective adsorbent. On the contrary, the Fe-CrS2 monolayer shows optimum adsorption strength and faster recovery behavior, emerging as a reusable gas sensor. Overall, this study provides a theoretical framework and opens up new avenues for the design and experimental investigation of high-performance CrS2-based gas sensors to detect hazardous cyanide gases.
- 16 November 2025
- Published by Elsevier in Surface Science
- Vol. 766
Surface chemistry of monochloramine catalyzed by Fe(111)
- 16 November 2025
- Published by Elsevier in Surface Science
- Vol. 766
Surface chemistry of monochloramine catalyzed by Fe(111)
- 26 August 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (36) , 19016-19029
A transition metal (Ti, V, and Mn)-decorated CrS 2 monolayer as a propitious gas scavenger for SF 6 decomposition remnants: acumen from density functional theory simulations
The present study, based on the first-principles calculations, reveals the gas-sensitive properties of the four SF 6 decomposition gases (H 2 S, SO 2 , SO 2 F 2 , and SOF 2 ) over the pristine and TM (Ti, V, and Mn) decoarted CrS 2 monolayer at the quantum level.
- 26 August 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (36) , 19016-19029
A transition metal (Ti, V, and Mn)-decorated CrS 2 monolayer as a propitious gas scavenger for SF 6 decomposition remnants: acumen from density functional theory simulations
The present study, based on the first-principles calculations, reveals the gas-sensitive properties of the four SF 6 decomposition gases (H 2 S, SO 2 , SO 2 F 2 , and SOF 2 ) over the pristine and TM (Ti, V, and Mn) decoarted CrS 2 monolayer at the quantum level.
- 22 May 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (21) , 13249-13263
Ultrasonically Driven Structural Evolution of Bimetallic Heterostructures for Construction of an ElectroTrace Analyzer
Bimetallic heterostructure materials (BHMs) have garnered significant attention due to their exceptional synergistic electrocatalytic properties. However, challenges persist in developing precise, scalable synthetic methods and understanding their underlying mechanisms. Here, we develop an ultrasonic-assisted anchoring strategy to fabricate BHMs on multiwalled carbon nanotubes (MWCNTs). First, a multifunctional polyaromatic organic receptor (MPOR), featuring urea and imine functional groups, was physisorbed onto MWCNTs (MWCNTs@MPOR), inducing structural coiling. Subsequent interaction with Hg metal ions led to the reorganization of MWCNTs (MWCNTs@MPOR/Hg), followed by ultrasonic treatment that facilitated Mn ion anchoring at the free imine sites, yielding the final BHMs MWCNTs@MPOR/Hg/Mn. Notably, the structural changes and nature of interactions were thoroughly studied by density functional theory (DFT) simulations. Experimental results and first-principles calculations revealed remarkably enhanced electrochemical activity with a charge transfer of -0.179e in MWCNTs@MPOR/Hg/Mn. Further, we introduced a portable "ElectroTrace Analyzer" based on MWCNTs@MPOR/Hg/Mn for real-time detection and quantification of atrazine (herbicide). Our ultrasonically assisted strategy for BHM synthesis offers a fascinating avenue for the advanced development of useful BHMs for real-world applications.
- 22 May 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (21) , 13249-13263
Ultrasonically Driven Structural Evolution of Bimetallic Heterostructures for Construction of an ElectroTrace Analyzer
Bimetallic heterostructure materials (BHMs) have garnered significant attention due to their exceptional synergistic electrocatalytic properties. However, challenges persist in developing precise, scalable synthetic methods and understanding their underlying mechanisms. Here, we develop an ultrasonic-assisted anchoring strategy to fabricate BHMs on multiwalled carbon nanotubes (MWCNTs). First, a multifunctional polyaromatic organic receptor (MPOR), featuring urea and imine functional groups, was physisorbed onto MWCNTs (MWCNTs@MPOR), inducing structural coiling. Subsequent interaction with Hg metal ions led to the reorganization of MWCNTs (MWCNTs@MPOR/Hg), followed by ultrasonic treatment that facilitated Mn ion anchoring at the free imine sites, yielding the final BHMs MWCNTs@MPOR/Hg/Mn. Notably, the structural changes and nature of interactions were thoroughly studied by density functional theory (DFT) simulations. Experimental results and first-principles calculations revealed remarkably enhanced electrochemical activity with a charge transfer of -0.179e in MWCNTs@MPOR/Hg/Mn. Further, we introduced a portable "ElectroTrace Analyzer" based on MWCNTs@MPOR/Hg/Mn for real-time detection and quantification of atrazine (herbicide). Our ultrasonically assisted strategy for BHM synthesis offers a fascinating avenue for the advanced development of useful BHMs for real-world applications.
- 29 March 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (14) , 6776-6787
Affinity of MoP (001) and MoP (010) Surfaces toward Nucleobases: A DFT Outlook
- 29 March 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (14) , 6776-6787
Affinity of MoP (001) and MoP (010) Surfaces toward Nucleobases: A DFT Outlook
- 14 November 2024
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 26 (47) , 29311-29327
Engineering highly efficient porphyrin sensitizers through metal, ligand and bridge modification: a DFT study
This work presents a systematic investigation of porphyrin sensitizers for application in dye-sensitized solar cells (DSSCs). Density functional theory calculations, including both static and time-dependent methods, were employed to evaluate a series of candidate dyes for their potential to achieve high power conversion efficiency. The well-established SM315 dye, known for its record-breaking PCE of 13%, was adopted as a reference point. A range of metal atoms including alkaline-earth and 3d transition metals were screened, Ca was identified as the most promising metal for light capture and conversion. Ca–porphyrin-based sensitizer was further modified by introducing different axial ligands and four distinct bridging units. The designed dyes exhibit red-shifted absorption spectra and optimal frontier orbital alignment with the semiconductor's conduction band, promoting efficient light capture and charge transfer. In addition to these core parameters, a comprehensive analysis of light harvesting efficiency (LHE), reorganization energy (λ), short-circuit current density (JSC), exciton binding energy (EBE), open-circuit voltage (VOC), electron transfer rate (k), polarization (α) and hyperpolarization (βtot) collectively paint a clear picture of superior light capture, efficient charge transport dynamics, and minimized energy losses within the designed dyes. This ultimately translates to the remarkable power conversion efficiency (PCE) exceeding 27% achieved by the specifically designed dye with the Ca as metal atom, 4,4′-bipyridine as axial ligands and cyclopenta-1,3-diene as bridging unit, surpassing the performance of SM315 dye (13% PCE). This systematic study combines the design of high-performance porphyrin sensitizers through molecular engineering with a comprehensive investigation of their impact on DSSC function using advanced computational methods.
- 14 November 2024
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 26 (47) , 29311-29327
Engineering highly efficient porphyrin sensitizers through metal, ligand and bridge modification: a DFT study
This work presents a systematic investigation of porphyrin sensitizers for application in dye-sensitized solar cells (DSSCs). Density functional theory calculations, including both static and time-dependent methods, were employed to evaluate a series of candidate dyes for their potential to achieve high power conversion efficiency. The well-established SM315 dye, known for its record-breaking PCE of 13%, was adopted as a reference point. A range of metal atoms including alkaline-earth and 3d transition metals were screened, Ca was identified as the most promising metal for light capture and conversion. Ca–porphyrin-based sensitizer was further modified by introducing different axial ligands and four distinct bridging units. The designed dyes exhibit red-shifted absorption spectra and optimal frontier orbital alignment with the semiconductor's conduction band, promoting efficient light capture and charge transfer. In addition to these core parameters, a comprehensive analysis of light harvesting efficiency (LHE), reorganization energy (λ), short-circuit current density (JSC), exciton binding energy (EBE), open-circuit voltage (VOC), electron transfer rate (k), polarization (α) and hyperpolarization (βtot) collectively paint a clear picture of superior light capture, efficient charge transport dynamics, and minimized energy losses within the designed dyes. This ultimately translates to the remarkable power conversion efficiency (PCE) exceeding 27% achieved by the specifically designed dye with the Ca as metal atom, 4,4′-bipyridine as axial ligands and cyclopenta-1,3-diene as bridging unit, surpassing the performance of SM315 dye (13% PCE). This systematic study combines the design of high-performance porphyrin sensitizers through molecular engineering with a comprehensive investigation of their impact on DSSC function using advanced computational methods.