Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mengen Dong has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Finite Element Analysis of Split Sleeve Cold Expansion Process on Multiple Hole Aluminum Alloy

    by Yuan Lv, Meng’en Dong, Teng Zhang, Changkai Wang, Bo Hou, Changfan Li

    Multiple cold expansion holes are widely used in connection areas of aircraft structures, in order to achieve uniform load transfer of the skin or connection parts. Split sleeve cold expansion (SSCE) is widely used to enhance the fatigue life of fastener holes by applying compressive residual stresses around the holes. In this study, the finite element method (FEM) was used to research the distribution and variation of residual stresses along the hole edges of 7075AA single-hole and multi-hole cold expansion (CE) specimens. Full-field strain measurements of single-hole and multi-hole specimens were performed using two-dimensional digital image correlation (DIC), and the residual stress and strain at the hole edge of the specimens measured by FEM and DIC were compared. FEM results shows that the maximum circumferential and radial residual stresses of three-hole specimens with three-hole spacing are increased by 5.37% and 31.53% compared with single-hole specimens. The maximum circumferential residual stress of three-hole specimens with four-hole spacing increases by 7.25% compared with a single hole, but the radial residual stress decreases by 12.98%. In addition, for three-hole specimens with hole spacing three times the hole diameter, the strengthening effect of SSCE in the order of middle hole, then left hole, and, finally, right hole is better than that of SSCE in the order of left to right hole. FEM and DIC full-field strain results are basically consistent.


  • Open Access

    Surface Mechanical Properties and Micro-Structure Evolution of 7075 Aluminum Alloy Sheet for 2-Dimension Ellipse Ultrasonic Vibration Incremental Forming: A Pretreatment for Laser Shock Peening

    by Yuan Lv, Mengen Dong, Xixiang Pan, Cong Yi, Jiaqi Su

    In this paper, a composite technique of ultrasonic incremental forming and laser shock peeing is proposed. The former process is mainly used for the manufacturing of complex-shaped sheet and strengthening coating that is prepared for subsequent laser treatment. The latter is applied for secondary surface reinforcement with ultra-high energy. This work focused on the novel ultrasonic incremental forming method and its effects on surface mechanical properties and micro-structure of a 7075 aluminum alloy. First, a kind of 2-dimension ellipse ultrasonic vibration incremental forming process and the unique double-mechanism method of sectionalized cooperative control of plastic deformation and mechanical performance were designed. Second, the single-point incremental forming, the longitudinal ultrasonic vibration incremental forming, and the 2 dimension ellipse ultrasonic vibration incremental forming were performed for the manufacture of conical components of 7075 aluminum alloy. Third, the Vickers micro-hardness testing results and images of the fracture morphology of the machined part for the novel technique confirm that softening mechanisms become dominant inside the metal sheet. Furthermore, a strengthening coating with excellent mechanical properties and a residual compressive stress field were created on its surface simultaneously. In a word, the research shows potential values of the proposed technique for the manufacture of aircraft panels of complex shape and excellent surface properties.