Ceyhun Erman
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ceyhun Erman has a total of 76 co-authors. Here are the top co-authors by number of shared publications:
- Tuna Eken
Istanbul Technical University
11 shared publications - Tuncay Taymaz
Department of Geophysical Engineering, The Faculty of Mines, Istanbul Technical University, ITU Ayazağa Campus , Maslak 34469, Sarıyer, İstanbul
11 shared publications - Seda Yolsal-Çevikbilen
Istanbul Technical University
8 shared publications - Tahir Serkan Irmak
Department of Geophysical Engineering, Kocaeli University , Izmit 41001, Kocaeli
6 shared publications Seda Yolsal-Çevikbilen
4 shared publications- Francesco Rappisi
School of Earth and Environment, University of Leeds, Leeds, UK
3 shared publications
Latest Publications
- Open Access
- 26 September 2026
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 247 (3)
Extensional tectonics and magma-driven seismicity across the Santorini–Amorgos basins, south-central Aegean Sea: insights from the 2025 earthquake swarm
SUMMARY: We examined source characteristics of the recent earthquake sequence that occurred in February 2025 between the volcanic fields of Santorini, Kolumbo, Anydros and Amorgos in south-central Aegean. This region lies within the volcanic back-arc domain of the Hellenic subduction zone in the Aegean Sea. During this period, the area experienced intense seismic activity (ten earthquakes 5.0 < Mw < 5.5), with earthquake magnitudes generally increasing towards Amorgos Island. The largest event was the Mw 5.4 earthquake on 2025 February 10, located northeast of Santorini. In this study, we first obtained 4869 earthquakes that occurred between 2024 January 2 and 2025 March 23. We then derived full moment-tensor (MT) solutions for 30 earthquakes (Mw ≥ 4.5) by inverting seismological data sets. In addition, principal stress orientations were calculated by stress tensor inversion to recognize the most recent crustal stress field in the region. The spatio-temporal distribution of the relocated aftershocks indicates that the seismic activity initiated beneath the Santorini and Kolumbo volcanic centres, and subsequently migrated northeastward towards Anydros and Amorgos. Most earthquakes occurred at shallow crustal depths of approximately 5–15 km. Stress-inversion results and the orientation of T-axes highlight a dominant NW–SE extensional regime that characterizes the combined effects of deep geodynamic processes and shallow crustal dynamics in the back-arc area of the Aegean. The full MT solutions reveal predominantly normal, oblique-normal and strike-slip faulting mechanisms, accompanied by significant non-double-couple (non-DC) components. These non-DC signatures strongly suggest tensile processes that are likely related to magma intrusion, fluid migration or hydraulic fracturing. We therefore conclude that the 2025 seismic sequence was largely driven by crack-opening mechanisms and fluid- or magma-induced activity within the crust, consistent with the broader structural framework and volcanic nature of the Santorini–Amorgos region. Overall, this study enhances our knowledge on tectonic characteristics of the 2025 Santorini–Amorgos earthquake activity, which is significant for evaluating and monitoring the potential hazards in the south-central Aegean region.
- 26 September 2026
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 247 (3)
Open AccessExtensional tectonics and magma-driven seismicity across the Santorini–Amorgos basins, south-central Aegean Sea: insights from the 2025 earthquake swarm
SUMMARY: We examined source characteristics of the recent earthquake sequence that occurred in February 2025 between the volcanic fields of Santorini, Kolumbo, Anydros and Amorgos in south-central Aegean. This region lies within the volcanic back-arc domain of the Hellenic subduction zone in the Aegean Sea. During this period, the area experienced intense seismic activity (ten earthquakes 5.0 < Mw < 5.5), with earthquake magnitudes generally increasing towards Amorgos Island. The largest event was the Mw 5.4 earthquake on 2025 February 10, located northeast of Santorini. In this study, we first obtained 4869 earthquakes that occurred between 2024 January 2 and 2025 March 23. We then derived full moment-tensor (MT) solutions for 30 earthquakes (Mw ≥ 4.5) by inverting seismological data sets. In addition, principal stress orientations were calculated by stress tensor inversion to recognize the most recent crustal stress field in the region. The spatio-temporal distribution of the relocated aftershocks indicates that the seismic activity initiated beneath the Santorini and Kolumbo volcanic centres, and subsequently migrated northeastward towards Anydros and Amorgos. Most earthquakes occurred at shallow crustal depths of approximately 5–15 km. Stress-inversion results and the orientation of T-axes highlight a dominant NW–SE extensional regime that characterizes the combined effects of deep geodynamic processes and shallow crustal dynamics in the back-arc area of the Aegean. The full MT solutions reveal predominantly normal, oblique-normal and strike-slip faulting mechanisms, accompanied by significant non-double-couple (non-DC) components. These non-DC signatures strongly suggest tensile processes that are likely related to magma intrusion, fluid migration or hydraulic fracturing. We therefore conclude that the 2025 seismic sequence was largely driven by crack-opening mechanisms and fluid- or magma-induced activity within the crust, consistent with the broader structural framework and volcanic nature of the Santorini–Amorgos region. Overall, this study enhances our knowledge on tectonic characteristics of the 2025 Santorini–Amorgos earthquake activity, which is significant for evaluating and monitoring the potential hazards in the south-central Aegean region.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Crustal Anisotropy Variations Revealed by Local S-wave Splitting in the Source Region of 2023 Kahramanmaraş Earthquakes along the East Anatolian Fault Zone
The 2023 Kahramanmaraş earthquake doublet (Mw 7.8 and Mw 7.7) produced an extensive rupture along several segments of the East Anatolian Faults (EAF), and triggered intense aftershock activity in southeastern Türkiye. This seismic sequence therefore provides an exceptional dataset to investigate the crustal anisotropy in such a complex tectonic area. In this study, we evaluated the crustal anisotropy in the source region of these catastrophic earthquakes by conducting a detailed local S-wave splitting (SWS) analysis on a relocated earthquake catalogue. We have performed shear-wave splitting measurements over several thousand local-S waveforms recordings of 31 permanent broadband seismic stations operated by AFAD (Turkish Earthquake Data Center) that were extracted using precise relocation of aftershock activity. After a visual quality control procedure for each splitting analysis, a total of 486 high-quality measurements were obtained. The results reveal a highly heterogeneous anisotropic pattern, with fast direction oriented from N80°W to N79°E and mean fast direction for the whole dataset of N16°E, reflecting the lateral variations in the regional stress field along the EAF, the Sürgü-Çardak Fault (SÇF), and the Malatya Fault. A transition between stress-induced and structure-related anisotropy is clearly identified across different segments of the EAF. Stations in close proximity to the EAF exhibit a dominant structure-induced anisotropic signature, characterized by the strict alignment of FPDs parallel to the fault geometry. Overall, the obtained results provide a comprehensive perspective on how the upper crust responds to substantial stress release, thus offering critical insights into the mechanical behaviour of complex fault networks where the regional collisional stress regimes and strike-slip faulting systems converge.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessCrustal Anisotropy Variations Revealed by Local S-wave Splitting in the Source Region of 2023 Kahramanmaraş Earthquakes along the East Anatolian Fault Zone
The 2023 Kahramanmaraş earthquake doublet (Mw 7.8 and Mw 7.7) produced an extensive rupture along several segments of the East Anatolian Faults (EAF), and triggered intense aftershock activity in southeastern Türkiye. This seismic sequence therefore provides an exceptional dataset to investigate the crustal anisotropy in such a complex tectonic area. In this study, we evaluated the crustal anisotropy in the source region of these catastrophic earthquakes by conducting a detailed local S-wave splitting (SWS) analysis on a relocated earthquake catalogue. We have performed shear-wave splitting measurements over several thousand local-S waveforms recordings of 31 permanent broadband seismic stations operated by AFAD (Turkish Earthquake Data Center) that were extracted using precise relocation of aftershock activity. After a visual quality control procedure for each splitting analysis, a total of 486 high-quality measurements were obtained. The results reveal a highly heterogeneous anisotropic pattern, with fast direction oriented from N80°W to N79°E and mean fast direction for the whole dataset of N16°E, reflecting the lateral variations in the regional stress field along the EAF, the Sürgü-Çardak Fault (SÇF), and the Malatya Fault. A transition between stress-induced and structure-related anisotropy is clearly identified across different segments of the EAF. Stations in close proximity to the EAF exhibit a dominant structure-induced anisotropic signature, characterized by the strict alignment of FPDs parallel to the fault geometry. Overall, the obtained results provide a comprehensive perspective on how the upper crust responds to substantial stress release, thus offering critical insights into the mechanical behaviour of complex fault networks where the regional collisional stress regimes and strike-slip faulting systems converge.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Tracing Slabs and Mantle Flow in the Mediterranean with 3D Anisotropic Tomography
We present the first comprehensive three-dimensional anisotropic tomographic model of the entire Mediterranean mantle (ani-MR25, Rappisi et al., 2025), obtained through the simultaneous inversion of teleseismic and regional P-wave travel-time combined with SKS splitting intensity measurements. This dual input dataset approach allows us to resolve both isotropic velocity structures and the directional properties of mantle anisotropy, providing a detailed view of lithospheric slabs and surrounding asthenospheric flow. Our results identify fast anomalies associated with retreating, stagnant, and detached slab segments,—including the Alboran, Apennine, Alpine, Dinaric, Carpathian, and Hellenic systems—and slower regions associated with slab windows and back-arc basins, such as in the Tyrrhenian and Hellenic areas. The recovered anisotropic patterns provide crucial markers of the region's tectonic history. We observe a wide range of P-wave fast axis plunge angles, with steeply dipping fabrics correlating with slab tearing, detachment zones, and volcanic provinces. Trench-parallel anisotropy beneath slabs and trench-perpendicular orientations in back-arc regions reflect the imprint of trench retreat and subduction-driven corner flow.By integrating isotropic and anisotropic observations, we construct a detailed 3-D model of Mediterranean slab geometries and surrounding mantle flow, offering new insights into the tectonic evolution and geodynamic processes of this complex region. Rappisi, F., Lo Bue, R., Vanderbeek, B. P., Confal, J. M., Erman, C., Baccheschi, P., ... & Faccenda, M. (2025). 3‐D mantle flow and structure of the Mediterranean from combined P‐wave and splitting intensity anisotropic tomography. Journal of Geophysical Research: Solid Earth, 130(6), e2024JB030883.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessTracing Slabs and Mantle Flow in the Mediterranean with 3D Anisotropic Tomography
We present the first comprehensive three-dimensional anisotropic tomographic model of the entire Mediterranean mantle (ani-MR25, Rappisi et al., 2025), obtained through the simultaneous inversion of teleseismic and regional P-wave travel-time combined with SKS splitting intensity measurements. This dual input dataset approach allows us to resolve both isotropic velocity structures and the directional properties of mantle anisotropy, providing a detailed view of lithospheric slabs and surrounding asthenospheric flow. Our results identify fast anomalies associated with retreating, stagnant, and detached slab segments,—including the Alboran, Apennine, Alpine, Dinaric, Carpathian, and Hellenic systems—and slower regions associated with slab windows and back-arc basins, such as in the Tyrrhenian and Hellenic areas. The recovered anisotropic patterns provide crucial markers of the region's tectonic history. We observe a wide range of P-wave fast axis plunge angles, with steeply dipping fabrics correlating with slab tearing, detachment zones, and volcanic provinces. Trench-parallel anisotropy beneath slabs and trench-perpendicular orientations in back-arc regions reflect the imprint of trench retreat and subduction-driven corner flow.By integrating isotropic and anisotropic observations, we construct a detailed 3-D model of Mediterranean slab geometries and surrounding mantle flow, offering new insights into the tectonic evolution and geodynamic processes of this complex region. Rappisi, F., Lo Bue, R., Vanderbeek, B. P., Confal, J. M., Erman, C., Baccheschi, P., ... & Faccenda, M. (2025). 3‐D mantle flow and structure of the Mediterranean from combined P‐wave and splitting intensity anisotropic tomography. Journal of Geophysical Research: Solid Earth, 130(6), e2024JB030883.
- Open Access
- 11 June 2025
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 130 (6)
3‐D Mantle Flow and Structure of the Mediterranean From Combined P‐Wave and Splitting Intensity Anisotropic Tomography
We present a novel three‐dimensional anisotropic seismic tomography model of the Mediterranean region, achieved through the simultaneous inversion of P‐wave travel‐times and SKS splitting intensity. This dual approach has allowed us to obtain a comprehensive tomographic model that not only delineates the primary structural features of the area but also sheds light on its tectonic evolution. Our findings reveal that the isotropic component of the model is dominated by fast anomalies associated with retreating, stagnant, and detached slab segments including the Alboran, Apennine, and Alpine slabs in the central and western Mediterranean, and the Dinaric, Carpathian, and Hellenic slabs in the east. Slower mantle structures are associated with slab windows and back‐arc basin formation, such as those observed in the Tyrrhenian, Apennine and Hellenic regions. The recovered anisotropic patterns provide crucial insights into the tectonic history of the Mediterranean, highlighting periods of collision and tectonic relaxation. Notably, we observe a range of plunge angles, with both near‐horizontal and steeply dipping anisotropic fabrics present in different regions, reflecting the influence of horizontal and vertical asthenospheric flow. By interpreting the high‐velocity zones as subducting lithosphere, we construct a detailed 3‐D model of the main slabs and analyzed the surrounding P‐wave anisotropic patterns. This work represents the first comprehensive anisotropic tomography study of the entire Mediterranean region.
- 11 June 2025
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 130 (6)
Open Access3‐D Mantle Flow and Structure of the Mediterranean From Combined P‐Wave and Splitting Intensity Anisotropic Tomography
We present a novel three‐dimensional anisotropic seismic tomography model of the Mediterranean region, achieved through the simultaneous inversion of P‐wave travel‐times and SKS splitting intensity. This dual approach has allowed us to obtain a comprehensive tomographic model that not only delineates the primary structural features of the area but also sheds light on its tectonic evolution. Our findings reveal that the isotropic component of the model is dominated by fast anomalies associated with retreating, stagnant, and detached slab segments including the Alboran, Apennine, and Alpine slabs in the central and western Mediterranean, and the Dinaric, Carpathian, and Hellenic slabs in the east. Slower mantle structures are associated with slab windows and back‐arc basin formation, such as those observed in the Tyrrhenian, Apennine and Hellenic regions. The recovered anisotropic patterns provide crucial insights into the tectonic history of the Mediterranean, highlighting periods of collision and tectonic relaxation. Notably, we observe a range of plunge angles, with both near‐horizontal and steeply dipping anisotropic fabrics present in different regions, reflecting the influence of horizontal and vertical asthenospheric flow. By interpreting the high‐velocity zones as subducting lithosphere, we construct a detailed 3‐D model of the main slabs and analyzed the surrounding P‐wave anisotropic patterns. This work represents the first comprehensive anisotropic tomography study of the entire Mediterranean region.
- Open Access
- 22 March 2025
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 130 (3)
Seismic Anisotropy Variations in the Eastern Mediterranean Sea Region Revealed by Splitting Intensity Tomography: Implications on Mantle Dynamics
Reliable knowledge of seismic anisotropy in the mantle can provide invaluable insights into complex tectonics and geodynamics in Anatolia controlled by intricate plate interactions across the region. However, the 3D variations in seismic anisotropy within the crust and upper mantle beneath this area remain poorly constrained. In the present study, we performed splitting intensity (SI) tomography technique, using over 25,000 SI measurements from SKS/SKKS waves recorded at 690 seismic stations, to map lateral and vertical variation of anisotropy that is essential for accurate geodynamic interpretations for Eastern Mediterranean. Our tomographic images show large‐scale mantle flow at asthenospheric depths, oriented in east‐west and northeast‐southwest directions. This flow pattern can be attributed to basal drag forces, which play an important role in driving the westward motion of the Anatolian plate. The strong azimuthal anisotropy in the back‐arc region of the Hellenic subduction zone, with trench‐perpendicular orientation, highlights the significant impact of trench retreat and rollback of the African lithosphere on deformations in the mantle lithosphere and asthenosphere beneath the Aegean region and western Türkiye. The observed weak azimuthal anisotropy, on the other hand, is largely identified across various depths beneath Quaternary volcanoes in the Central and East Anatolian Volcanic Provinces and along the Cyprus subducting slab in the upper mantle. Our numerical tests prove that these weak anomalies may result from plunging/vertical anisotropy associated with upwelling and/or downwelling mantle in central and eastern Anatolia.
- 22 March 2025
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 130 (3)
Open AccessSeismic Anisotropy Variations in the Eastern Mediterranean Sea Region Revealed by Splitting Intensity Tomography: Implications on Mantle Dynamics
Reliable knowledge of seismic anisotropy in the mantle can provide invaluable insights into complex tectonics and geodynamics in Anatolia controlled by intricate plate interactions across the region. However, the 3D variations in seismic anisotropy within the crust and upper mantle beneath this area remain poorly constrained. In the present study, we performed splitting intensity (SI) tomography technique, using over 25,000 SI measurements from SKS/SKKS waves recorded at 690 seismic stations, to map lateral and vertical variation of anisotropy that is essential for accurate geodynamic interpretations for Eastern Mediterranean. Our tomographic images show large‐scale mantle flow at asthenospheric depths, oriented in east‐west and northeast‐southwest directions. This flow pattern can be attributed to basal drag forces, which play an important role in driving the westward motion of the Anatolian plate. The strong azimuthal anisotropy in the back‐arc region of the Hellenic subduction zone, with trench‐perpendicular orientation, highlights the significant impact of trench retreat and rollback of the African lithosphere on deformations in the mantle lithosphere and asthenosphere beneath the Aegean region and western Türkiye. The observed weak azimuthal anisotropy, on the other hand, is largely identified across various depths beneath Quaternary volcanoes in the Central and East Anatolian Volcanic Provinces and along the Cyprus subducting slab in the upper mantle. Our numerical tests prove that these weak anomalies may result from plunging/vertical anisotropy associated with upwelling and/or downwelling mantle in central and eastern Anatolia.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Pattern of Crustal Anisotropy Along the East Anatolian Fault, the Sürgü-Çardak Fault and Surroundings Associated with the 2023 Kahramanmaraş Earthquakes, SE Türkiye
The devastating earthquakes of Mw 7.8 and Mw 7.7 with left-lateral strike-slip mechanisms occurred on the 6th February 2023 along the East Anatolian Fault (EAF) and the Sürgü-Çardak Fault (SÇF) in southeastern Türkiye. Observed intense aftershock activity triggered by the 2023 doublet provides a valuable opportunity to study the upper crustal anisotropy along the EAF, the SÇF, and surrounding rock volumes. In this study, we measured the shear-wave splitting parameters of several local earthquakes that occurred between 1st July 2022 and 31st August 2023 - approximately seven months before and after the 2023 mainshocks. To improve the accuracy of the event locations, we initially relocated 10.823 earthquakes (M > 2) using the HypoDD code, building up a catalogue of high-precision earthquake locations. Subsequently, the splitting parameters, including the fast polarization direction (FPD) and the delay time (DT), were estimated for ~1.615 events recorded at 34 broadband seismic stations operated by AFAD (Turkish National Seismic Network). Only event-station pairs with an incidence angle of less than 45° and an event-station distance of smaller than 1° (~111 km) were considered to be suitable for detailed analysis. The spatial variations in both FPD and DT imply a complex anisotropic structure beneath the study region, likely caused by structure-induced mechanisms. At each station, the fast polarization directions are closely aligned with geometry of mapped faults and active faulting mechanisms which vary along the structurally intricate deforming zones in SE Türkiye. The overall observation suggests that the crustal anisotropy is predominantly controlled by the fault-related structures within the region of study. Besides, the delay times (~0.2s) are significantly larger at stations in close proximity to the active fault-lines.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessPattern of Crustal Anisotropy Along the East Anatolian Fault, the Sürgü-Çardak Fault and Surroundings Associated with the 2023 Kahramanmaraş Earthquakes, SE Türkiye
The devastating earthquakes of Mw 7.8 and Mw 7.7 with left-lateral strike-slip mechanisms occurred on the 6th February 2023 along the East Anatolian Fault (EAF) and the Sürgü-Çardak Fault (SÇF) in southeastern Türkiye. Observed intense aftershock activity triggered by the 2023 doublet provides a valuable opportunity to study the upper crustal anisotropy along the EAF, the SÇF, and surrounding rock volumes. In this study, we measured the shear-wave splitting parameters of several local earthquakes that occurred between 1st July 2022 and 31st August 2023 - approximately seven months before and after the 2023 mainshocks. To improve the accuracy of the event locations, we initially relocated 10.823 earthquakes (M > 2) using the HypoDD code, building up a catalogue of high-precision earthquake locations. Subsequently, the splitting parameters, including the fast polarization direction (FPD) and the delay time (DT), were estimated for ~1.615 events recorded at 34 broadband seismic stations operated by AFAD (Turkish National Seismic Network). Only event-station pairs with an incidence angle of less than 45° and an event-station distance of smaller than 1° (~111 km) were considered to be suitable for detailed analysis. The spatial variations in both FPD and DT imply a complex anisotropic structure beneath the study region, likely caused by structure-induced mechanisms. At each station, the fast polarization directions are closely aligned with geometry of mapped faults and active faulting mechanisms which vary along the structurally intricate deforming zones in SE Türkiye. The overall observation suggests that the crustal anisotropy is predominantly controlled by the fault-related structures within the region of study. Besides, the delay times (~0.2s) are significantly larger at stations in close proximity to the active fault-lines.
- Open Access
- 15 March 2025
- Published by Copernicus GmbH
Monitoring the Variations in Crustal Seismic Velocity and Anisotropy Associated with the 2023 Kahramanmaraş Earthquakes, Türkiye, using Ambient Noise Cross Correlation
On the 6th February 2023 two devastating earthquakes of Mw 7.8 and Mw 7.7 with left-lateral strike-slip mechanisms occurred along the East Anatolian Fault (EAF) and the Sürgü-Çardak Fault (SÇF) in southeastern Türkiye. The doublet nucleated and instantaneously ruptured for ~350 km and ~160 km during the complex network of multi-fault segments reaching a maximum slip of ~8 m and >10 m, respectively. The consecutive large earthquakes are likely to have caused permanent changes in the shallow crustal properties, especially in the vicinity of the fault zone. The variations in crustal velocity and anisotropy during the pre-, co-, and post-seismic periods could be efficiently monitored using the ambient noise data. The primary objective of this work is to monitor isotropic velocity changes for the pre-, co-, and post-seismic periods, as well as rapid changes in seismic anisotropy potentially caused by coseismic stress field rotation beneath the EAFZ. To achieve this, we analyze continuous three-component digital recordings from 52 broadband seismic stations located along the EAF, the SÇF and surroundings that are operated by AFAD (Turkish National Seismic Network) and KOERI (Kandilli Observatory and Earthquake Research Institute). First, we analyze the daily correlation functions of all rotated components (ZZ, TT, RR, ZT, TZ, TR, RT, RZ, and ZR) in order to obtain the isotropic seismic velocity change. Second, we rotate the nine-component cross-correlation tensors (CCTs) to minimize tangential components (TZ, ZT, TR, RT), as expected to be zero for an isotropic medium with randomly distributed noise. This approach enables us to monitor the temporal variations of crustal anisotropy before, after, and during these two devastating earthquakes, effectively. Here we present our preliminary results on the spatiotemporal variations of crustal anisotropy derived from ambient seismic noise cross-correlations between station pairs during the 2023 Kahramanmaraş doublet.
- 15 March 2025
- Published by Copernicus GmbH
Open AccessMonitoring the Variations in Crustal Seismic Velocity and Anisotropy Associated with the 2023 Kahramanmaraş Earthquakes, Türkiye, using Ambient Noise Cross Correlation
On the 6th February 2023 two devastating earthquakes of Mw 7.8 and Mw 7.7 with left-lateral strike-slip mechanisms occurred along the East Anatolian Fault (EAF) and the Sürgü-Çardak Fault (SÇF) in southeastern Türkiye. The doublet nucleated and instantaneously ruptured for ~350 km and ~160 km during the complex network of multi-fault segments reaching a maximum slip of ~8 m and >10 m, respectively. The consecutive large earthquakes are likely to have caused permanent changes in the shallow crustal properties, especially in the vicinity of the fault zone. The variations in crustal velocity and anisotropy during the pre-, co-, and post-seismic periods could be efficiently monitored using the ambient noise data. The primary objective of this work is to monitor isotropic velocity changes for the pre-, co-, and post-seismic periods, as well as rapid changes in seismic anisotropy potentially caused by coseismic stress field rotation beneath the EAFZ. To achieve this, we analyze continuous three-component digital recordings from 52 broadband seismic stations located along the EAF, the SÇF and surroundings that are operated by AFAD (Turkish National Seismic Network) and KOERI (Kandilli Observatory and Earthquake Research Institute). First, we analyze the daily correlation functions of all rotated components (ZZ, TT, RR, ZT, TZ, TR, RT, RZ, and ZR) in order to obtain the isotropic seismic velocity change. Second, we rotate the nine-component cross-correlation tensors (CCTs) to minimize tangential components (TZ, ZT, TR, RT), as expected to be zero for an isotropic medium with randomly distributed noise. This approach enables us to monitor the temporal variations of crustal anisotropy before, after, and during these two devastating earthquakes, effectively. Here we present our preliminary results on the spatiotemporal variations of crustal anisotropy derived from ambient seismic noise cross-correlations between station pairs during the 2023 Kahramanmaraş doublet.
- Open Access
- 23 December 2024
- Published by Wiley
3-D Mantle Flow and Structure of the Mediterranean from Combined P-wave and Splitting Intensity Anisotropic Tomography
We present a novel three-dimensional anisotropic seismic tomography of the Mediterranean region, achieved through the simultaneous inversion of P-wave travel times and SKS splitting intensity. This dual approach has allowed us to obtain a comprehensive tomographic model that not only delineates the primary structural features of the area but also sheds light on its tectonic evolution. Our findings reveal that the isotropic component of the model is dominated by fast anomalies linked to retreating, stagnant, and detached slab segments, while slower mantle structures are associated with slab windows and back-arc basin formation. The recovered anisotropic patterns provide crucial insights into the tectonic history of the Mediterranean, highlighting periods of collision and tectonic relaxation. Notably, we observe a range of plunge angles, with both near-horizontal and steeply dipping fabrics present in different regions, reflecting the influence of horizontal and vertical asthenospheric flows. By interpreting the high-velocity zones as subducting lithosphere, we constructed a detailed 3-D model of the main slabs and analyzed the surrounding P-wave anisotropic patterns. This work represents the first comprehensive anisotropic tomography of the entire Mediterranean, underscoring the significance of seismic anisotropy in constraining the upper mantle structure and elucidating the region's tectonic dynamics throughout its geological history.
- 23 December 2024
- Published by Wiley
Open Access3-D Mantle Flow and Structure of the Mediterranean from Combined P-wave and Splitting Intensity Anisotropic Tomography
We present a novel three-dimensional anisotropic seismic tomography of the Mediterranean region, achieved through the simultaneous inversion of P-wave travel times and SKS splitting intensity. This dual approach has allowed us to obtain a comprehensive tomographic model that not only delineates the primary structural features of the area but also sheds light on its tectonic evolution. Our findings reveal that the isotropic component of the model is dominated by fast anomalies linked to retreating, stagnant, and detached slab segments, while slower mantle structures are associated with slab windows and back-arc basin formation. The recovered anisotropic patterns provide crucial insights into the tectonic history of the Mediterranean, highlighting periods of collision and tectonic relaxation. Notably, we observe a range of plunge angles, with both near-horizontal and steeply dipping fabrics present in different regions, reflecting the influence of horizontal and vertical asthenospheric flows. By interpreting the high-velocity zones as subducting lithosphere, we constructed a detailed 3-D model of the main slabs and analyzed the surrounding P-wave anisotropic patterns. This work represents the first comprehensive anisotropic tomography of the entire Mediterranean, underscoring the significance of seismic anisotropy in constraining the upper mantle structure and elucidating the region's tectonic dynamics throughout its geological history.
- Open Access
- 7 March 2024
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 237 (3) , 1285-1300
The 2020 Mw 7.0 Samos (Eastern Aegean Sea) Earthquake: joint source inversion of multitype data, and tsunami modelling
We present a kinematic slip model and a simulation of the ensuing tsunami for the 2020 Mw 7.0 Néon Karlovásion (Samos, Eastern Aegean Sea) earthquake, generated from a joint inversion of high-rate GNSS, strong ground motion and InSAR data. From the inversion, we find that the source time function has a total duration of ∼20 s with three peaks at ∼4, 7.5 and 15 s corresponding to the development of three asperities. Most of the slip occurs at the west of the hypocenter and ends at the northwest down-dip edge. The peak slip is ∼3.3 m, and the inverted rake angles indicate predominantly normal faulting motion. Compared with previous studies, these slip patterns have essentially similar asperity location, rupture dimension and anti-correlation with aftershocks. Consistent with our study, most published papers show the source duration of ∼20 s with three episodes of increased moment releases. For the ensuing tsunami, the eight available gauge records indicate that the tsunami waves last ∼18-30 hours depending on location, and the response period of tsunami is ∼10-35 min. The initial waves in the observed records and synthetic simulations show good agreement, which indirectly validates the performance of the inverted slip model. However, the synthetic waveforms struggle to generate long-duration tsunami behavior in simulations. Our tests suggest that the resolution of the bathymetry may be a potential factor affecting the simulated tsunami duration and amplitude. It should be noted that the maximum wave height in the records may occur after the decay of synthetic wave amplitudes. This implies that the inability to model long-duration tsunamis could result in underestimation in future tsunami hazard assessments.
- 7 March 2024
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 237 (3) , 1285-1300
Open AccessThe 2020 Mw 7.0 Samos (Eastern Aegean Sea) Earthquake: joint source inversion of multitype data, and tsunami modelling
We present a kinematic slip model and a simulation of the ensuing tsunami for the 2020 Mw 7.0 Néon Karlovásion (Samos, Eastern Aegean Sea) earthquake, generated from a joint inversion of high-rate GNSS, strong ground motion and InSAR data. From the inversion, we find that the source time function has a total duration of ∼20 s with three peaks at ∼4, 7.5 and 15 s corresponding to the development of three asperities. Most of the slip occurs at the west of the hypocenter and ends at the northwest down-dip edge. The peak slip is ∼3.3 m, and the inverted rake angles indicate predominantly normal faulting motion. Compared with previous studies, these slip patterns have essentially similar asperity location, rupture dimension and anti-correlation with aftershocks. Consistent with our study, most published papers show the source duration of ∼20 s with three episodes of increased moment releases. For the ensuing tsunami, the eight available gauge records indicate that the tsunami waves last ∼18-30 hours depending on location, and the response period of tsunami is ∼10-35 min. The initial waves in the observed records and synthetic simulations show good agreement, which indirectly validates the performance of the inverted slip model. However, the synthetic waveforms struggle to generate long-duration tsunami behavior in simulations. Our tests suggest that the resolution of the bathymetry may be a potential factor affecting the simulated tsunami duration and amplitude. It should be noted that the maximum wave height in the records may occur after the decay of synthetic wave amplitudes. This implies that the inability to model long-duration tsunamis could result in underestimation in future tsunami hazard assessments.
- Top Cited Papers
- 19 January 2024
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 383 (6680) , 305-311
Supershear triggering and cascading fault ruptures of the 2023 Kahramanmaraş, Türkiye, earthquake doublet
On 6 February 2023, two large earthquakes (moment magnitude 7.8 and 7.6) shocked a vast area of southeastern Türkiye and northern Syria, leading to heavy casualties and economic loss. To investigate the rupture process over multiple fault segments, we performed a comprehensive analysis of local seismic and geodetic data and determined supershear ruptures on the initial branch and the Pazarcık and Erkenek segments and subshear ruptures on the Amanos segment of event 1. The bilateral rupture of event 2 also presents distinct sub- and supershear velocities. The dynamic stress of the branch fault rupture triggered the Pazarcık segment initial rupture at a point 9 kilometers west of the junction of these two faults, boosting the supershear rupture of the Pazarcık segment of the main fault. The geometry and prestress level of multiple segments controlled the rupture behaviors and influenced the ground shaking intensity.
- 19 January 2024
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 383 (6680) , 305-311
Top Cited PapersSupershear triggering and cascading fault ruptures of the 2023 Kahramanmaraş, Türkiye, earthquake doublet
On 6 February 2023, two large earthquakes (moment magnitude 7.8 and 7.6) shocked a vast area of southeastern Türkiye and northern Syria, leading to heavy casualties and economic loss. To investigate the rupture process over multiple fault segments, we performed a comprehensive analysis of local seismic and geodetic data and determined supershear ruptures on the initial branch and the Pazarcık and Erkenek segments and subshear ruptures on the Amanos segment of event 1. The bilateral rupture of event 2 also presents distinct sub- and supershear velocities. The dynamic stress of the branch fault rupture triggered the Pazarcık segment initial rupture at a point 9 kilometers west of the junction of these two faults, boosting the supershear rupture of the Pazarcık segment of the main fault. The geometry and prestress level of multiple segments controlled the rupture behaviors and influenced the ground shaking intensity.