Álvaro Muñoz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Álvaro Muñoz has a total of 1 co-authors. Here are the top co-authors by number of shared publications:
- Pablo García-Fogeda
Department of Aircraft and Space Vehicles, ETSIAE, Universidad Politécnica de Madrid, 28040 Madrid, Spain
3 shared publications
Latest Publications
- Open Access
- 14 November 2025
- Published by Universidad Politecnica de Madrid - University Library
Aeroservoelastic Control of a Highly Coupled Dynamic System with Nonlinear Additions
The increasing use of high-aspect-ratio wings in UAVs has opened new opportunities in long-endurance and high-altitude operations, but has also introduced significant aeroelastic challenges. The structural flexibility inherent to these aircraft makes them particularly vulnerable to aeroelastic instabilities. To address these issues, the application of active flutter suppression (AFS) techniques has gained growing interest, offering the potential to extend flight envelopes and improve safety margins in flexible aircraft. This thesis presents the modelling, simulation, and control design of an AFS system based on an H-infinity controller applied to a high-aspect-ratio aircraft. The research focuses on developing a complete time-domain aeroservoelastic simulator and using it to synthesise and test a robust stabilisation strategy. The aircraft model used as a case study was designed to exhibit representative flexible behaviour while remaining within the linear deformation range. The time simulator is constructed from first principles and integrates structural, aerodynamic and actuator models. The structural dynamics are modelled using a finite element stick approach, and an original algorithm is developed to explicitly preserve rigid-body modes while expressing the entire system in modal coordinates. Aerodynamic loads are derived in the Laplace domain for subsonic, transonic, sonic, and supersonic regimes using two-dimensional aerodynamic theories. These loads are projected onto the modal basis and converted to the time domain through Rogers rational function approximation (RFA). A reduced basis is introduced to mitigate the numerical stiffness caused by the large number of augmented aerodynamic states. Additional contributions include the modelling of actuator lags and simplified thrust dynamics. A nonlinear state-space model is formulated and integrated using stiff numerical solvers. Trimmed flight conditions are computed, and the system is linearized around the equilibrium point to enable controller design. The aeroelastic poles evolution reveals that the flutter mechanism involves a coupling between the antisymmetric torsional mode and the roll mode. In order to stablish the feedback loop, first the optimal sensor placement problem is solved using modified observability Gramians for unstable systems, and a Luenberger observer is developed to estimate modal states from sensor data. Then, a strongly stabilising H-infinity controller is synthesised, designed to independently address the symmetric and antisymmetric subsystems. The resulting controller is implemented in the nonlinear time-domain simulator and is shown to suppress flutter effectively. The system maintains attitude controllability, testing its response through a parallel autopilot at speeds beyond the original flutter boundary, demonstrating the feasibility of active stabilisation without sacrificing control authority. In conclusion, this thesis proposes a comprehensive framework for the analysis and control of flexible aircraft, highlighting the importance of realistic physical modelling, sensor optimisation and robust controller synthesis. The formulation of the aerodynamic loads directly in the Laplace domain and the implementation of strong stabilisation methods represent key contributions to the state of the art in aeroservoelastic control. RESUMEN El uso creciente de alas de gran alargamiento en UAVs ha abierto nuevas oportunidades para misiones de larga duración y gran altitud, pero también ha introducido importantes desafíos aeroelásticos. La flexibilidad estructural inherente a estas aeronaves las hace particularmente vulnerables a inestabilidades aeroelásticas. Para abordar estos problemas, la aplicación de técnicas de supresión activa de flameo (AFS) ha despertado un interés renovado, al permitir ampliar la envuelta de vuelo y mejorar los márgenes de seguridad en aeronaves flexibles. Esta tesis presenta el modelado, simulación e implementación de un sistema AFS basado en un controlador tipo H-infinito, aplicado a una aeronave con un ala de gran alargamiento. La investigación se centra en el desarrollo de un simulador aeroservoelástico completo en el dominio del tiempo y en su utilización para sintetizar y validar una estrategia de estabilización robusta. El modelo de la aeronave empleada como caso de estudio fue diseñado para exhibir un comportamiento flexible representativo, permaneciendo dentro del rango lineal de deformación. El simulador temporal se construye desde los principios básicos e integra los modelos estructural, aerodinámico y de actuadores. La dinámica estructural se modeliza mediante elementos finitos de tipo viga, y para ello se desarrolla un algoritmo original que conserva explícitamente los modos propios de cuerpo rígido al expresar todo el sistema en coordenadas modales. Las cargas aerodinámicas se calculan en el dominio de Laplace para regímenes subsónico, transónico, sónico y supersónico, utilizando teorías aerodinámicas bidimensionales. Estas cargas se proyectan sobre la base modal y se transforman al dominio temporal mediante el uso de la aproximación por funciones racionales (RFA) de Roger. Adicionalmente, se introduce una base reducida para mitigar la rigidez numérica provocada por el gran número de estados aerodinámicos adicionales. Otras contribuciones incluyen el modelado de los retardos de los actuadores y un modelo de empuje del motor simplificado. Se formula un modelo no lineal en espacio de los estados, que se integra utilizando métodos numéricos para sistemas rígidos. Se calculan condiciones de vuelo trimadas, y se linealiza el sistema en torno al punto de equilibrio para permitir el diseño del controlador. La evolución de los polos aeroelásticos revela que el mecanismo de...
- 14 November 2025
- Published by Universidad Politecnica de Madrid - University Library
Open AccessAeroservoelastic Control of a Highly Coupled Dynamic System with Nonlinear Additions
The increasing use of high-aspect-ratio wings in UAVs has opened new opportunities in long-endurance and high-altitude operations, but has also introduced significant aeroelastic challenges. The structural flexibility inherent to these aircraft makes them particularly vulnerable to aeroelastic instabilities. To address these issues, the application of active flutter suppression (AFS) techniques has gained growing interest, offering the potential to extend flight envelopes and improve safety margins in flexible aircraft. This thesis presents the modelling, simulation, and control design of an AFS system based on an H-infinity controller applied to a high-aspect-ratio aircraft. The research focuses on developing a complete time-domain aeroservoelastic simulator and using it to synthesise and test a robust stabilisation strategy. The aircraft model used as a case study was designed to exhibit representative flexible behaviour while remaining within the linear deformation range. The time simulator is constructed from first principles and integrates structural, aerodynamic and actuator models. The structural dynamics are modelled using a finite element stick approach, and an original algorithm is developed to explicitly preserve rigid-body modes while expressing the entire system in modal coordinates. Aerodynamic loads are derived in the Laplace domain for subsonic, transonic, sonic, and supersonic regimes using two-dimensional aerodynamic theories. These loads are projected onto the modal basis and converted to the time domain through Rogers rational function approximation (RFA). A reduced basis is introduced to mitigate the numerical stiffness caused by the large number of augmented aerodynamic states. Additional contributions include the modelling of actuator lags and simplified thrust dynamics. A nonlinear state-space model is formulated and integrated using stiff numerical solvers. Trimmed flight conditions are computed, and the system is linearized around the equilibrium point to enable controller design. The aeroelastic poles evolution reveals that the flutter mechanism involves a coupling between the antisymmetric torsional mode and the roll mode. In order to stablish the feedback loop, first the optimal sensor placement problem is solved using modified observability Gramians for unstable systems, and a Luenberger observer is developed to estimate modal states from sensor data. Then, a strongly stabilising H-infinity controller is synthesised, designed to independently address the symmetric and antisymmetric subsystems. The resulting controller is implemented in the nonlinear time-domain simulator and is shown to suppress flutter effectively. The system maintains attitude controllability, testing its response through a parallel autopilot at speeds beyond the original flutter boundary, demonstrating the feasibility of active stabilisation without sacrificing control authority. In conclusion, this thesis proposes a comprehensive framework for the analysis and control of flexible aircraft, highlighting the importance of realistic physical modelling, sensor optimisation and robust controller synthesis. The formulation of the aerodynamic loads directly in the Laplace domain and the implementation of strong stabilisation methods represent key contributions to the state of the art in aeroservoelastic control. RESUMEN El uso creciente de alas de gran alargamiento en UAVs ha abierto nuevas oportunidades para misiones de larga duración y gran altitud, pero también ha introducido importantes desafíos aeroelásticos. La flexibilidad estructural inherente a estas aeronaves las hace particularmente vulnerables a inestabilidades aeroelásticas. Para abordar estos problemas, la aplicación de técnicas de supresión activa de flameo (AFS) ha despertado un interés renovado, al permitir ampliar la envuelta de vuelo y mejorar los márgenes de seguridad en aeronaves flexibles. Esta tesis presenta el modelado, simulación e implementación de un sistema AFS basado en un controlador tipo H-infinito, aplicado a una aeronave con un ala de gran alargamiento. La investigación se centra en el desarrollo de un simulador aeroservoelástico completo en el dominio del tiempo y en su utilización para sintetizar y validar una estrategia de estabilización robusta. El modelo de la aeronave empleada como caso de estudio fue diseñado para exhibir un comportamiento flexible representativo, permaneciendo dentro del rango lineal de deformación. El simulador temporal se construye desde los principios básicos e integra los modelos estructural, aerodinámico y de actuadores. La dinámica estructural se modeliza mediante elementos finitos de tipo viga, y para ello se desarrolla un algoritmo original que conserva explícitamente los modos propios de cuerpo rígido al expresar todo el sistema en coordenadas modales. Las cargas aerodinámicas se calculan en el dominio de Laplace para regímenes subsónico, transónico, sónico y supersónico, utilizando teorías aerodinámicas bidimensionales. Estas cargas se proyectan sobre la base modal y se transforman al dominio temporal mediante el uso de la aproximación por funciones racionales (RFA) de Roger. Adicionalmente, se introduce una base reducida para mitigar la rigidez numérica provocada por el gran número de estados aerodinámicos adicionales. Otras contribuciones incluyen el modelado de los retardos de los actuadores y un modelo de empuje del motor simplificado. Se formula un modelo no lineal en espacio de los estados, que se integra utilizando métodos numéricos para sistemas rígidos. Se calculan condiciones de vuelo trimadas, y se linealiza el sistema en torno al punto de equilibrio para permitir el diseño del controlador. La evolución de los polos aeroelásticos revela que el mecanismo de...
- Open Access
Active Flutter Suppression of a Wing Section in the Subsonic, Sonic and Supersonic Regimes by the H∞ Control Method
This paper compares various procedures for determining the optimal control law for a wing section in compressible flow. The flow regime includes subsonic, sonic and supersonic flows. For the evolution of the system in the Laplace plane, the present method makes use of the exact unsteady aerodynamic forces in this plane once the control law is established. This is a great advantage over other results previously published, where the unsteady aerodynamics in the Laplace plane are merely approximations of the curve-fitted values in the frequency domain (imaginary axis). A comparison of different control techniques like pole placement, LQR and H-infinity control demonstrates that the H-infinity controller is the optimal choice, exhibiting an H-infinity norm approximately two orders of magnitude lower than the LQR case. Furthermore, the H-infinity controller demonstrates lower pole values than those of the pole placement and LQR compensator, showing the advantage of the H-infinity controller in terms of economic efficiency.
Open AccessActive Flutter Suppression of a Wing Section in the Subsonic, Sonic and Supersonic Regimes by the H∞ Control Method
This paper compares various procedures for determining the optimal control law for a wing section in compressible flow. The flow regime includes subsonic, sonic and supersonic flows. For the evolution of the system in the Laplace plane, the present method makes use of the exact unsteady aerodynamic forces in this plane once the control law is established. This is a great advantage over other results previously published, where the unsteady aerodynamics in the Laplace plane are merely approximations of the curve-fitted values in the frequency domain (imaginary axis). A comparison of different control techniques like pole placement, LQR and H-infinity control demonstrates that the H-infinity controller is the optimal choice, exhibiting an H-infinity norm approximately two orders of magnitude lower than the LQR case. Furthermore, the H-infinity controller demonstrates lower pole values than those of the pole placement and LQR compensator, showing the advantage of the H-infinity controller in terms of economic efficiency.
- Open Access
- 6 November 2023
- Published by MDPI AG in Preprints.org
Optimal Control Law for the Flutter Suppression of a Wing Section in Compressible Flows
This paper presents various procedures for determining the optimal control law for a wing section in compressible flow. The flow regime includes subsonic as well as supersonic flows. For the evolution of the system in the Laplace plane the present method makes use of the exact unsteady aerodynamic forces in the Laplace plane once the control law is established. This is a great advantage against other results previously published, where the unsteady aerodynamics in the Laplace plane are just approximations of the curve-fitted values in the frequency domain (imaginary axis). Different control techniques are investigated like pole-placement, LQR and H-infinity norm. Among these, the H-infinity norm emerges as the optimal choice, exhibiting a norm magnitude approximately two orders of magnitude lower than the LQR case. Furthermore, the H-infinity controller demonstrates lower pole values that those of the pole placement and LQR compensator, showing the advantage of the H-infinity controller in terms of economic efficiency.
- 6 November 2023
- Published by MDPI AG in Preprints.org
Open AccessOptimal Control Law for the Flutter Suppression of a Wing Section in Compressible Flows
This paper presents various procedures for determining the optimal control law for a wing section in compressible flow. The flow regime includes subsonic as well as supersonic flows. For the evolution of the system in the Laplace plane the present method makes use of the exact unsteady aerodynamic forces in the Laplace plane once the control law is established. This is a great advantage against other results previously published, where the unsteady aerodynamics in the Laplace plane are just approximations of the curve-fitted values in the frequency domain (imaginary axis). Different control techniques are investigated like pole-placement, LQR and H-infinity norm. Among these, the H-infinity norm emerges as the optimal choice, exhibiting a norm magnitude approximately two orders of magnitude lower than the LQR case. Furthermore, the H-infinity controller demonstrates lower pole values that those of the pole placement and LQR compensator, showing the advantage of the H-infinity controller in terms of economic efficiency.
- Open Access
Active Flutter Suppression of a Wing Section in a Compressible Flow
In this paper, a unified method for the computation of the unsteady aerodynamic forces in the Laplace domain for a wing section in subsonic, sonic and supersonic potential flows is presented. The subsonic solution is a new development based on the pressure mode method. The unsteady aerodynamic forces are evaluated in the Laplace domain by an efficient method for computing the kernel. The sonic potential flow solution is an extension of the solution for the frequency domain to the Laplace domain. Analytical expressions for the unsteady pressure coefficient and the unsteady aerodynamic forces in the Laplace domain are obtained for this flow regime. The method is validated in these regimes with existing theories in the frequency domain, and its application to flutter computation is provided for different Mach numbers by the use of the p-method. Active flutter suppression for a wing section with three degrees of freedom has been studied, and an adequate control law has been obtained. Using the proposed approach allows to calculate the unsteady aerodynamic forces directly in the Laplace domain, avoiding the inconvenience of the curve fitting from the frequency to the Laplace domain. In particular, this work can be used as a base for the application of other procedures for flutter suppression in the transonic regime.
Open AccessActive Flutter Suppression of a Wing Section in a Compressible Flow
In this paper, a unified method for the computation of the unsteady aerodynamic forces in the Laplace domain for a wing section in subsonic, sonic and supersonic potential flows is presented. The subsonic solution is a new development based on the pressure mode method. The unsteady aerodynamic forces are evaluated in the Laplace domain by an efficient method for computing the kernel. The sonic potential flow solution is an extension of the solution for the frequency domain to the Laplace domain. Analytical expressions for the unsteady pressure coefficient and the unsteady aerodynamic forces in the Laplace domain are obtained for this flow regime. The method is validated in these regimes with existing theories in the frequency domain, and its application to flutter computation is provided for different Mach numbers by the use of the p-method. Active flutter suppression for a wing section with three degrees of freedom has been studied, and an adequate control law has been obtained. Using the proposed approach allows to calculate the unsteady aerodynamic forces directly in the Laplace domain, avoiding the inconvenience of the curve fitting from the frequency to the Laplace domain. In particular, this work can be used as a base for the application of other procedures for flutter suppression in the transonic regime.