Qing Cao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Qing Cao has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
Xiaohua Zhang
Institute of Chemistry and Chemical Engineering, Taiyuan University of Technology, Taiyuan, P. R. China
16 shared publicationsLi'E Jin
Institute of Chemistry and Chemical Engineering Taiyuan University of Technology Shanxi 030024 P.R. China
12 shared publicationsQun Wang
Institute of Chemistry and Chemical Engineering, Taiyuan University of Technology, Taiyuan, P. R. China
10 shared publications- Heng-Xiang Li
Shandong Provincial Key Laboratory of Chemical Energy Storage and Novel Cell Technology, School of Chemistry and Chemical Engineering, Liaocheng University, Liaocheng 252059, China
6 shared publications Li’e Jin
Institute of Chemistry and Chemical Engineering, Taiyuan University of Technology, Taiyuan, People’s Republic of China
6 shared publicationsHengxiang Li
Institute of Chemistry and Chemical Engineering, Taiyuan University of Technology, Taiyuan, P. R. China
5 shared publications
Latest Publications
- 30 August 2023
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 62 (36) , 14577-14587
Electricity-Triggered Simultaneous Cesium and Bromide Ion Exchange of BiOBr in an Electrochemically Switched Ion Exchange Process
- 30 August 2023
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 62 (36) , 14577-14587
Electricity-Triggered Simultaneous Cesium and Bromide Ion Exchange of BiOBr in an Electrochemically Switched Ion Exchange Process
- 27 July 2020
- Published by Springer Nature in Fibers and Polymers
- Vol. 21 (7) , 1395-1402
Synthesis and Properties of Cellulose-based Superabsorbent Hydrogel by a New Crosslinker
- 27 July 2020
- Published by Springer Nature in Fibers and Polymers
- Vol. 21 (7) , 1395-1402
Synthesis and Properties of Cellulose-based Superabsorbent Hydrogel by a New Crosslinker
- 16 February 2020
- Published by Taylor & Francis in Journal of Dispersion Science and Technology
- Vol. 42 (7) , 1021-1030
Preparation of bio-oil-based polymer microspheres for adsorption Cu2+ and its adsorption behaviors
Bio oil, a liquid derived from pyrolyzing biomass, which is rich in oxygen and hard to utilize. Herein, a kind of bio-oil-based polymer microspheres for adsorbing Cu2+ was successfully synthesized. Pretreated bio-oil were cross-linked with phenol, formaldehyde into a polymer. Then the polymer was encapsulated into microspheres by sodium alginate sol-gel. In comparison with the microspheres produced without bio-oil and unpretreated bio-oil but under identical steps, the microspheres obtained with pretreated bio-oil had the maximum adsorption capacity of 194.54 mg g−1 for Cu2+ (293 K), which exceeded most capacity reported in the literature. The adsorption process followed pseudo-second-order kinetics, and fitted well with the Langmuir isotherm model. It was also an endothermic and spontaneous process. The structure and morphology were also characterized by fourier transform infrared (FT-IR) spectrometer, thermal gravimetric (TG), N2 adsorption–desorption isotherm analyses, scanning electron microscope (SEM), elemental analyzer, X–ray photoelectron spectroscopy analysis (XPS). This work provides a novel way of utilizing bio-oil and choosing adsorbents for the removal of heavy metals. The bio-oil based polymer microspheres were prepared and exhibited excellent adsorption of Cu2+. This phenomenon was attributed to the fact that the presence of oxygen-containing functional groups such as –OH, and –SO3 in the microspheres provided sites of action for chelation with heavy metal ions.
- 16 February 2020
- Published by Taylor & Francis in Journal of Dispersion Science and Technology
- Vol. 42 (7) , 1021-1030
Preparation of bio-oil-based polymer microspheres for adsorption Cu2+ and its adsorption behaviors
Bio oil, a liquid derived from pyrolyzing biomass, which is rich in oxygen and hard to utilize. Herein, a kind of bio-oil-based polymer microspheres for adsorbing Cu2+ was successfully synthesized. Pretreated bio-oil were cross-linked with phenol, formaldehyde into a polymer. Then the polymer was encapsulated into microspheres by sodium alginate sol-gel. In comparison with the microspheres produced without bio-oil and unpretreated bio-oil but under identical steps, the microspheres obtained with pretreated bio-oil had the maximum adsorption capacity of 194.54 mg g−1 for Cu2+ (293 K), which exceeded most capacity reported in the literature. The adsorption process followed pseudo-second-order kinetics, and fitted well with the Langmuir isotherm model. It was also an endothermic and spontaneous process. The structure and morphology were also characterized by fourier transform infrared (FT-IR) spectrometer, thermal gravimetric (TG), N2 adsorption–desorption isotherm analyses, scanning electron microscope (SEM), elemental analyzer, X–ray photoelectron spectroscopy analysis (XPS). This work provides a novel way of utilizing bio-oil and choosing adsorbents for the removal of heavy metals. The bio-oil based polymer microspheres were prepared and exhibited excellent adsorption of Cu2+. This phenomenon was attributed to the fact that the presence of oxygen-containing functional groups such as –OH, and –SO3 in the microspheres provided sites of action for chelation with heavy metal ions.
- 27 November 2019
- Published by Wiley in ChemElectroChem
- Vol. 6 (23) , 5896-5905
Synthesis of a Novel Petal‐Shaped Biomass‐Derived Carbon Material with Controlled Pore Structure and Nitrogen Content for Use in Supercapacitors
Controllably adjusting the porosity and the heteroatom content has become extremely attractive for increasing the energy storage capacity of carbon materials. In this work, petal‐shaped N‐doping carbon materials with super‐high specific surface area (2752 m2 g−1) and enriched micropores (90.1 %) have been synthesized by using renewable spikes of terminalia catappa as raw materials via a facile and feasible method. The results confirmed that the prepared N‐doping carbon material exhibits outstanding electrochemical performances. The specific capacitance reaches up to 503 F g−1 at 0.5 A g−1 and 306 F g−1 at 50 A g−1; cycling stability maintains 100.2 % after 10000 cycles. The fabricated symmetric supercapacitor shows an attractive energy density of 30.5 W h Kg−1 at a power density of 492.4 W Kg−1 in 1 M Na2SO4 electrolyte. Moreover, this study opens up a new way to enhance the micropore proportion and N content of carbon materials and displays the unique petal‐shaped nano‐flakes morphology that can maximally expose the surface of carbon materials.
- 27 November 2019
- Published by Wiley in ChemElectroChem
- Vol. 6 (23) , 5896-5905
Synthesis of a Novel Petal‐Shaped Biomass‐Derived Carbon Material with Controlled Pore Structure and Nitrogen Content for Use in Supercapacitors
Controllably adjusting the porosity and the heteroatom content has become extremely attractive for increasing the energy storage capacity of carbon materials. In this work, petal‐shaped N‐doping carbon materials with super‐high specific surface area (2752 m2 g−1) and enriched micropores (90.1 %) have been synthesized by using renewable spikes of terminalia catappa as raw materials via a facile and feasible method. The results confirmed that the prepared N‐doping carbon material exhibits outstanding electrochemical performances. The specific capacitance reaches up to 503 F g−1 at 0.5 A g−1 and 306 F g−1 at 50 A g−1; cycling stability maintains 100.2 % after 10000 cycles. The fabricated symmetric supercapacitor shows an attractive energy density of 30.5 W h Kg−1 at a power density of 492.4 W Kg−1 in 1 M Na2SO4 electrolyte. Moreover, this study opens up a new way to enhance the micropore proportion and N content of carbon materials and displays the unique petal‐shaped nano‐flakes morphology that can maximally expose the surface of carbon materials.
- 4 November 2019
- Published by Wiley in Journal of Chemical Technology & Biotechnology
- Vol. 95 (3) , 770-780
Catalytic hydrolysis of cellulose to total reducing sugars with superior recyclable magnetic multifunctional MCMB‐based solid acid as a catalyst
BACKGROUND: Effective cellulose hydrolysis has a huge potential for producing high value‐added biomass‐based platform chemicals, such as glucose, hydroxymethylfurfural, levulinic acid, and total reducing sugars (TRS). Particularly, a magnetic multifunctional solid acid catalyst (Fe3O4/Cl–MCMB–SO3H) was synthesized by loading the active groups on the magnetic mesocarbon microbead (MCMB) derived from the co‐calcination of coal tar pitch and ferroferric oxide, which was applied as a catalyst in the conversion of cellulose into TRS.RESULTS: Given the superior properties of MCMB, a novel magnetic MCMB‐based solid acid with cellulose‐binding domain (–Cl group) and catalytic domain (–SO3H group) was successfully prepared. Results indicated that this catalyst exhibited superior catalytic activity, recyclability and regenerability, and easy separation from the reactant. The acidic densities of –SO3H and –Cl in Fe3O4/Cl–MCMB–SO3H reached 1.77 and 1.32 mmol/g, respectively. The 68.6% TRS yield can be obtained from cellulose at 140 °C for 3 h in distilled water by using Fe3O4/Cl‐MCMB‐SO3H as the catalyst. The TRS yield still reached 61.1% after the catalyst was used six times. Importantly, through catalyst regeneration, the –SO3H density and TRS yield still reached 1.69 mmol/g and 67.3%, indicating that the catalyst exhibited excellent regenerability.CONCLUSION: Such multifunctional magnetic catalyst would be a promising catalyst in the conversion of cellulose into biofuels, which was attributed to the efficient catalytic performance, magnetism, and excellent recyclability and regenerability. © 2019 Society of Chemical Industry
- 4 November 2019
- Published by Wiley in Journal of Chemical Technology & Biotechnology
- Vol. 95 (3) , 770-780
Catalytic hydrolysis of cellulose to total reducing sugars with superior recyclable magnetic multifunctional MCMB‐based solid acid as a catalyst
BACKGROUND: Effective cellulose hydrolysis has a huge potential for producing high value‐added biomass‐based platform chemicals, such as glucose, hydroxymethylfurfural, levulinic acid, and total reducing sugars (TRS). Particularly, a magnetic multifunctional solid acid catalyst (Fe3O4/Cl–MCMB–SO3H) was synthesized by loading the active groups on the magnetic mesocarbon microbead (MCMB) derived from the co‐calcination of coal tar pitch and ferroferric oxide, which was applied as a catalyst in the conversion of cellulose into TRS.RESULTS: Given the superior properties of MCMB, a novel magnetic MCMB‐based solid acid with cellulose‐binding domain (–Cl group) and catalytic domain (–SO3H group) was successfully prepared. Results indicated that this catalyst exhibited superior catalytic activity, recyclability and regenerability, and easy separation from the reactant. The acidic densities of –SO3H and –Cl in Fe3O4/Cl–MCMB–SO3H reached 1.77 and 1.32 mmol/g, respectively. The 68.6% TRS yield can be obtained from cellulose at 140 °C for 3 h in distilled water by using Fe3O4/Cl‐MCMB‐SO3H as the catalyst. The TRS yield still reached 61.1% after the catalyst was used six times. Importantly, through catalyst regeneration, the –SO3H density and TRS yield still reached 1.69 mmol/g and 67.3%, indicating that the catalyst exhibited excellent regenerability.CONCLUSION: Such multifunctional magnetic catalyst would be a promising catalyst in the conversion of cellulose into biofuels, which was attributed to the efficient catalytic performance, magnetism, and excellent recyclability and regenerability. © 2019 Society of Chemical Industry
- 4 October 2019
- Published by Springer Nature in Cellulose
- Vol. 27 (1) , 285-300
Study on the hydrolysis of cellulose with the regenerable and recyclable multifunctional solid acid as a catalyst and its catalytic hydrolytic kinetics
- 4 October 2019
- Published by Springer Nature in Cellulose
- Vol. 27 (1) , 285-300
Study on the hydrolysis of cellulose with the regenerable and recyclable multifunctional solid acid as a catalyst and its catalytic hydrolytic kinetics
- 6 March 2019
- Published by Wiley in ChemElectroChem
- Vol. 6 (7) , 2064-2073
Rational Design of Highly Conductive Nitrogen‐Doped Hollow Carbon Microtubes Derived from Willow Catkin for Supercapacitor Applications
The rational design of carbon materials with high electrical conductivity, low tortuosity, large specific surface area, and sufficient heteroatom doping for high‐performance supercapacitor application is highly desired but remains as a major challenge. Herein, by templating the natural microtubular and thin‐walled structure of willow catkin, a highly conductive nitrogen‐doped hollow carbon microtube material was synthesized through an integrated procedure including polymerization, pyrolysis, and activation. Robust N‐doped crosslinked graphene was grafted on the internal and external walls of carbonized hollow catkin to form a sandwich structure of the derived carbon. The obtained carbon microtubes exhibit a large specific surface area (2608 m2 g−1), short and unimpeded ion‐diffusion paths, high‐level heteroatom doping (O: 12.5 at %, N: 3.4 at %), and excellent electrical conductivity (128 S m−1). Benefitting from its desirable textural properties and favorable elemental composition, the derived electrode, without the addition of conductive additives, delivers impressive capacitance values of 408 F g−1 (0.5 A g−1) in 6 M KOH electrolyte and 420.8 F g−1 (1 A g−1) in 1 M H2SO4, as well as an outstanding rate capability and excellent cycling stability. In addition, the assembled symmetric supercapacitor displays an ultrahigh energy density of 27.3 Wh kg−1 at 182 W kg−1 in 1 M Na2SO4 electrolyte. These advanced characteristics ensure the carbon microtubes hold great promise for energy storage/conversion applications.
- 6 March 2019
- Published by Wiley in ChemElectroChem
- Vol. 6 (7) , 2064-2073
Rational Design of Highly Conductive Nitrogen‐Doped Hollow Carbon Microtubes Derived from Willow Catkin for Supercapacitor Applications
The rational design of carbon materials with high electrical conductivity, low tortuosity, large specific surface area, and sufficient heteroatom doping for high‐performance supercapacitor application is highly desired but remains as a major challenge. Herein, by templating the natural microtubular and thin‐walled structure of willow catkin, a highly conductive nitrogen‐doped hollow carbon microtube material was synthesized through an integrated procedure including polymerization, pyrolysis, and activation. Robust N‐doped crosslinked graphene was grafted on the internal and external walls of carbonized hollow catkin to form a sandwich structure of the derived carbon. The obtained carbon microtubes exhibit a large specific surface area (2608 m2 g−1), short and unimpeded ion‐diffusion paths, high‐level heteroatom doping (O: 12.5 at %, N: 3.4 at %), and excellent electrical conductivity (128 S m−1). Benefitting from its desirable textural properties and favorable elemental composition, the derived electrode, without the addition of conductive additives, delivers impressive capacitance values of 408 F g−1 (0.5 A g−1) in 6 M KOH electrolyte and 420.8 F g−1 (1 A g−1) in 1 M H2SO4, as well as an outstanding rate capability and excellent cycling stability. In addition, the assembled symmetric supercapacitor displays an ultrahigh energy density of 27.3 Wh kg−1 at 182 W kg−1 in 1 M Na2SO4 electrolyte. These advanced characteristics ensure the carbon microtubes hold great promise for energy storage/conversion applications.
- 17 January 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (7) , 3298-3306
Direct synthesis of porous graphitic carbon sheets grafted on carbon fibers for high-performance supercapacitors
Porous graphitic carbon sheets grafted on microfibers were synthesized with the aid of a green activating–graphitizing agent K3[Fe(C2O4)3].
- 17 January 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (7) , 3298-3306
Direct synthesis of porous graphitic carbon sheets grafted on carbon fibers for high-performance supercapacitors
Porous graphitic carbon sheets grafted on microfibers were synthesized with the aid of a green activating–graphitizing agent K3[Fe(C2O4)3].
- 25 December 2018
- Published by Taylor & Francis in Fullerenes, Nanotubes and Carbon Nanostructures
- Vol. 27 (2) , 97-105
Preparation of large-sized graphene from needle coke and the adsorption for malachite green with its graphene oxide
With needle coke (NC) as an initial material, large-sized graphene was successfully prepared through an oxidation–exfoliation–thermal reduction process. The prepared graphene was characterized by SEM, TEM, AFM, FTIR, XRD, Raman, and XPS, respectively. Results showed that the morphology of graphene from NC was different from that of natural graphite although the spectroscopic properties of graphene from NC are very similar to those from natural graphite. The lateral size of the prepared graphene is concentrated in 3–8 µm, which was considerably larger than that of natural graphite, multiwalled carbon nanotubes (MWCNTs) and stacked graphene nanofibers (SGNFs). In addition, the adsorption capacity of graphene oxide from NC for malachite green was investigated to confirm the size of graphene indirectly. The equilibrium adsorption capacity of 437.7 mg/g for malachite green was considerably higher than that from natural graphite whose adsorption capacity was 209.5 mg/g under identical conditions. All results confirm that NC is a better alternative for the preparation of graphene than natural graphite.
- 25 December 2018
- Published by Taylor & Francis in Fullerenes, Nanotubes and Carbon Nanostructures
- Vol. 27 (2) , 97-105
Preparation of large-sized graphene from needle coke and the adsorption for malachite green with its graphene oxide
With needle coke (NC) as an initial material, large-sized graphene was successfully prepared through an oxidation–exfoliation–thermal reduction process. The prepared graphene was characterized by SEM, TEM, AFM, FTIR, XRD, Raman, and XPS, respectively. Results showed that the morphology of graphene from NC was different from that of natural graphite although the spectroscopic properties of graphene from NC are very similar to those from natural graphite. The lateral size of the prepared graphene is concentrated in 3–8 µm, which was considerably larger than that of natural graphite, multiwalled carbon nanotubes (MWCNTs) and stacked graphene nanofibers (SGNFs). In addition, the adsorption capacity of graphene oxide from NC for malachite green was investigated to confirm the size of graphene indirectly. The equilibrium adsorption capacity of 437.7 mg/g for malachite green was considerably higher than that from natural graphite whose adsorption capacity was 209.5 mg/g under identical conditions. All results confirm that NC is a better alternative for the preparation of graphene than natural graphite.