Gabriela Kazimiera Warden
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gabriela Kazimiera Warden has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Marisa Di Sabatino
Norwegian University of Science and Technology
4 shared publications Bartłomiej Adam Gaweł
3 shared publicationsMari Juel
SINTEF Industry
3 shared publicationsAndreas Erbe
2 shared publications- Bartłomiej Adam Gaweł
The Quartz Corp, Hellandsveien 14, 8270 Drag, Norway
2 shared publications Benny Hallam
2 shared publications
Latest Publications
- 5 July 2026
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 306
Role of bubble growth on glass viscosity of crucibles used in Czochralski process
- 5 July 2026
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 306
Role of bubble growth on glass viscosity of crucibles used in Czochralski process
- Open Access
- 19 May 2026
- Published by Elsevier in SSRN Electronic Journal
Role of Bubble Growth for Mechanical Stability of Crucibles in the Czochralski Process
The Czochralski (Cz) process is widely used to produce monocrystalline silicon ingots for photovoltaic and semiconductors applications. During crystal pulling, molten silicon is kept in fused quartz glass crucibles that must withstand temperatures up to 1500 °C for hundred hours without deformation. The mechanical stability of the crucibles can be compromised by the expansion of bubbles in the bubble-containing (BC) layer of the crucible. The influence of such bubble growth on structural integrity remains unclear.In this study, the viscosity of the BC layer was correlated with bubble content and size. Results show a strong relationship between bubble volume fraction and apparent viscosity, with higher bubble content leading to reduced viscosity and greater risk of crucible deformation. This agrees with viscosity models for bubbly liquids, where large deformable bubbles significantly decrease viscosity.These findings demonstrate that controlling bubble size and growth is critical for extending crucibles longevity, thereby reducing production costs in monocrystalline silicon manufacturing for photovoltaic and semiconductor applications.
- 19 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessRole of Bubble Growth for Mechanical Stability of Crucibles in the Czochralski Process
The Czochralski (Cz) process is widely used to produce monocrystalline silicon ingots for photovoltaic and semiconductors applications. During crystal pulling, molten silicon is kept in fused quartz glass crucibles that must withstand temperatures up to 1500 °C for hundred hours without deformation. The mechanical stability of the crucibles can be compromised by the expansion of bubbles in the bubble-containing (BC) layer of the crucible. The influence of such bubble growth on structural integrity remains unclear.In this study, the viscosity of the BC layer was correlated with bubble content and size. Results show a strong relationship between bubble volume fraction and apparent viscosity, with higher bubble content leading to reduced viscosity and greater risk of crucible deformation. This agrees with viscosity models for bubbly liquids, where large deformable bubbles significantly decrease viscosity.These findings demonstrate that controlling bubble size and growth is critical for extending crucibles longevity, thereby reducing production costs in monocrystalline silicon manufacturing for photovoltaic and semiconductor applications.
- Open Access
- 20 January 2026
- Published by TIB Open Publishing in SiliconPV Conference Proceedings
- Vol. 3
Fused Quartz Crucibles for PV Applications: The Role of Czochralski Process Parameters and Sand Quality on the Bubble Formation and Growth
Monocrystalline silicon ingots are grown in a Czochralski (Cz) furnace by melting high purity silicon feedstock in a fused quartz crucible. As the standard solar cell size is getting larger, silicon ingots manufacturers have increased their demands on crucibles size and properties. Among other factors, the formation of bubbles and their growth affect the crucible`s properties and performance, which in turn are affected by the process parameters. The mechanisms of these bubbles formation and growth are still not well understood. In this study, we investigate the bubble formation and growth in three different types of crucibles before and after use in a Cz process. The crucibles have different sand qualities, -size and -chemistries. The content of hydroxyl (OH) is measured by Fourier Transform Infrared Spectroscopy (FTIR), while bubble size and distribution are measured by X-ray tomography and optical microscopy, respectively. The results indicate that a reduction in OH content correlates with increasing bubble growth. The reference crucible, which has coarse particle size distribution and standard chemistry, has the largest variation in bubble content and the largest average bubble growth for the samples investigated. The crucible with the finest particle size distribution and high purity seems to be the best choice for silicon ingot production as it experiences, on average, the lowest bubble growth in the bubble free (BF) layer. The results also show that the crucible quality (e.g. the manufacturing process and chemistry) affect the bubble content as well as the OH level.
- 20 January 2026
- Published by TIB Open Publishing in SiliconPV Conference Proceedings
- Vol. 3
Open AccessFused Quartz Crucibles for PV Applications: The Role of Czochralski Process Parameters and Sand Quality on the Bubble Formation and Growth
Monocrystalline silicon ingots are grown in a Czochralski (Cz) furnace by melting high purity silicon feedstock in a fused quartz crucible. As the standard solar cell size is getting larger, silicon ingots manufacturers have increased their demands on crucibles size and properties. Among other factors, the formation of bubbles and their growth affect the crucible`s properties and performance, which in turn are affected by the process parameters. The mechanisms of these bubbles formation and growth are still not well understood. In this study, we investigate the bubble formation and growth in three different types of crucibles before and after use in a Cz process. The crucibles have different sand qualities, -size and -chemistries. The content of hydroxyl (OH) is measured by Fourier Transform Infrared Spectroscopy (FTIR), while bubble size and distribution are measured by X-ray tomography and optical microscopy, respectively. The results indicate that a reduction in OH content correlates with increasing bubble growth. The reference crucible, which has coarse particle size distribution and standard chemistry, has the largest variation in bubble content and the largest average bubble growth for the samples investigated. The crucible with the finest particle size distribution and high purity seems to be the best choice for silicon ingot production as it experiences, on average, the lowest bubble growth in the bubble free (BF) layer. The results also show that the crucible quality (e.g. the manufacturing process and chemistry) affect the bubble content as well as the OH level.
- Open Access
- 6 December 2024
- Published by TIB Open Publishing in SiliconPV Conference Proceedings
- Vol. 2
Cristobalite Formation in Fused Quartz Crucibles for Czochralski Silicon Production in Different Conditions
Cristobalite is one of the quartz crystalline polymorphs that forms at above 1470 °C in its pure form and above 1000 °C for quartz glass. Its formation during the Czochralski process is therefore inevitable, and is usually controlled by doping the quartz sand with barium or barium-based coatings. The formation of cristobalite can lead to significant structural defects in silicon ingots. In this work, we studied the influence of various materials (graphite, silicon carbide and alumina) on the formation and properties of the cristobalite layer. In our study we investigated glass samples extracted from a commercially produced fused quartz crucible. The samples were heat-treated in different furnaces with different contact materials: alumina, silicon carbide and graphite. The furnace with alumina as contact material was an open-air furnace, while the two others were purged with argon. All of the heat treatment experiments lasted for 3 hours at a temperature of 1500 °C, which is the approximate temperature of the Czochralski process. After the heat treatment, the samples were investigated by light microscopy and X-ray diffraction. The results showed that the contact material is the most determining factor for the cristobalite layer’s thickness and morphology. The enhancement of cristobalite formation is the greatest by using graphite as the contact material, followed by alumina. Results indicate a retardation in phase transformation in comparison to other materials. These findings are an important step to further understanding of the cristobalite formation kinetics in fused quartz crucibles during the Czochralski process.
- 6 December 2024
- Published by TIB Open Publishing in SiliconPV Conference Proceedings
- Vol. 2
Open AccessCristobalite Formation in Fused Quartz Crucibles for Czochralski Silicon Production in Different Conditions
Cristobalite is one of the quartz crystalline polymorphs that forms at above 1470 °C in its pure form and above 1000 °C for quartz glass. Its formation during the Czochralski process is therefore inevitable, and is usually controlled by doping the quartz sand with barium or barium-based coatings. The formation of cristobalite can lead to significant structural defects in silicon ingots. In this work, we studied the influence of various materials (graphite, silicon carbide and alumina) on the formation and properties of the cristobalite layer. In our study we investigated glass samples extracted from a commercially produced fused quartz crucible. The samples were heat-treated in different furnaces with different contact materials: alumina, silicon carbide and graphite. The furnace with alumina as contact material was an open-air furnace, while the two others were purged with argon. All of the heat treatment experiments lasted for 3 hours at a temperature of 1500 °C, which is the approximate temperature of the Czochralski process. After the heat treatment, the samples were investigated by light microscopy and X-ray diffraction. The results showed that the contact material is the most determining factor for the cristobalite layer’s thickness and morphology. The enhancement of cristobalite formation is the greatest by using graphite as the contact material, followed by alumina. Results indicate a retardation in phase transformation in comparison to other materials. These findings are an important step to further understanding of the cristobalite formation kinetics in fused quartz crucibles during the Czochralski process.
- Open Access
- 7 December 2022
- Published by Elsevier in Open Ceramics
- Vol. 13
Recent developments on manufacturing and characterization of fused quartz crucibles for monocrystalline silicon for photovoltaic applications
- 7 December 2022
- Published by Elsevier in Open Ceramics
- Vol. 13
Open AccessRecent developments on manufacturing and characterization of fused quartz crucibles for monocrystalline silicon for photovoltaic applications