Mansoor Khan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mansoor Khan has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Luqman Ali Shah
Polymer Laboratory, National Centre of Excellence in Physical Chemistry, University of Peshawar, Peshawar, 25120, Pakistan
5 shared publications Fanghua Ning
Institute for Sustainable Energy, College of Sciences, Shanghai University, Shanghai, 200444, China
2 shared publicationsHyeong-Min Yoo
2 shared publications- Hyeong-Min Yoo
School of Mechanical Engineering Kookmin University Seoul Republic of Korea
2 shared publications - Jin Yi
Shanghai University
2 shared publications - Jun Fu
Key Laboratory of Polymeric Composite and Functional Materials, School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou 510275, China
2 shared publications
Latest Publications
- 19 October 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (21) , 14165-14178
Ion–Dipole Interaction Engineering in Weakly Solvated Polymer Electrolytes for Stable Li-O2 Batteries
The development of lithium-oxygen (Li-O2) batteries, which possess high theoretical energy density, has long been hindered by safety issues and parasitic reactions arising from conventional liquid electrolytes. Gel polymer electrolytes (GPEs) have emerged as a promising alternative to settle these issues; however, their practical application is still limited by poor interfacial compatibility and insufficient oxidative stability. Herein, we design GPEs that uniquely integrate a weakly solvating siloxane network, 3-(trimethoxysilyl)propyl methacrylate (MAPTMS), with a polar carbonate matrix of vinyl ethylene carbonate (VEC) via in situ copolymerization. The siloxane framework enhances structural stability and interfacial compatibility, while polar side chains promote efficient ion dissociation and transport. The optimized poly(VEC-co-MAPTMS) (PMVL) electrolyte exhibits a high ionic conductivity of 0.255 mS cm–1 at room temperature and an electrochemical stability window up to 4.96 V. Combined spectroscopic characterization and molecular dynamics (MD) simulations reveal that MAPTMS incorporation modulates polymer crystallinity and Li+ coordination environments, driving the formation of abundant aggregate (AGG) microdomains. This anion-rich solvation structure not only accelerates ion transport and lowers the Li+ desolvation barrier to enable uniform lithium deposition but also steers the formation of a thin, inorganic-rich solid electrolyte interphase (SEI). Leveraging this anion-rich solvation environment, a symmetric cell with PMVL achieves an extended cycle life of 4000 h at 0.1 mA cm–2 and 0.1 mAh cm–2 capacity. Furthermore, the Li-O2 battery using PMVL delivers stable operation for 140 cycles at 25 °C under a fixed capacity of 500 mAh g–1. This work demonstrates that the molecular-level synergy between weakly solvating and strongly polar segments offers a universal strategy to concurrently address ionic conductivity, interfacial stability, and oxidation resistance challenges in high-energy-density polymer electrolyte batteries.
- 19 October 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (21) , 14165-14178
Ion–Dipole Interaction Engineering in Weakly Solvated Polymer Electrolytes for Stable Li-O2 Batteries
The development of lithium-oxygen (Li-O2) batteries, which possess high theoretical energy density, has long been hindered by safety issues and parasitic reactions arising from conventional liquid electrolytes. Gel polymer electrolytes (GPEs) have emerged as a promising alternative to settle these issues; however, their practical application is still limited by poor interfacial compatibility and insufficient oxidative stability. Herein, we design GPEs that uniquely integrate a weakly solvating siloxane network, 3-(trimethoxysilyl)propyl methacrylate (MAPTMS), with a polar carbonate matrix of vinyl ethylene carbonate (VEC) via in situ copolymerization. The siloxane framework enhances structural stability and interfacial compatibility, while polar side chains promote efficient ion dissociation and transport. The optimized poly(VEC-co-MAPTMS) (PMVL) electrolyte exhibits a high ionic conductivity of 0.255 mS cm–1 at room temperature and an electrochemical stability window up to 4.96 V. Combined spectroscopic characterization and molecular dynamics (MD) simulations reveal that MAPTMS incorporation modulates polymer crystallinity and Li+ coordination environments, driving the formation of abundant aggregate (AGG) microdomains. This anion-rich solvation structure not only accelerates ion transport and lowers the Li+ desolvation barrier to enable uniform lithium deposition but also steers the formation of a thin, inorganic-rich solid electrolyte interphase (SEI). Leveraging this anion-rich solvation environment, a symmetric cell with PMVL achieves an extended cycle life of 4000 h at 0.1 mA cm–2 and 0.1 mAh cm–2 capacity. Furthermore, the Li-O2 battery using PMVL delivers stable operation for 140 cycles at 25 °C under a fixed capacity of 500 mAh g–1. This work demonstrates that the molecular-level synergy between weakly solvating and strongly polar segments offers a universal strategy to concurrently address ionic conductivity, interfacial stability, and oxidation resistance challenges in high-energy-density polymer electrolyte batteries.
- 10 September 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (39) , 33762-33774
Autonomously adhesive and anti-freezing MXene-organohydrogel bionic sensor for wearable interfaces and silent speech recognition
An autonomous adhesion MXene-organohydrogel sensor enables real-time monitoring and silent speech recognition for wearable electronics in diverse environments.
- 10 September 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (39) , 33762-33774
Autonomously adhesive and anti-freezing MXene-organohydrogel bionic sensor for wearable interfaces and silent speech recognition
An autonomous adhesion MXene-organohydrogel sensor enables real-time monitoring and silent speech recognition for wearable electronics in diverse environments.
- 18 March 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 13 (16) , 4796-4808
CNC-mediated functionalized MWCNT-reinforced double-network conductive hydrogels as smart, flexible strain and epidermic sensors for human motion monitoring
Soft, stretchable, and smart strain-sensing hydrogels have attracted significant attention due to their broad applicability in emerging fields. However, developing hydrogel-based strain-sensing materials with finely tuned mechanical and sensing properties remains challenging, primarily due to the inherent brittleness of traditionally fabricated hydrogels. In this study, a novel flexible strain- and epidermis-sensitive sensor was designed using a cellulose nanocrystal (CNC)-mediated acid functionalized multiwalled carbon nanotube (A-MWCNT)-reinforced double-network conductive hydrogel. This dual-network hydrogel system was fabricated by integrating a covalently crosslinked acrylamide (Amm) and [2-(acryloyloxy) ethyl] trimethyl-ammonium chloride (AETAC) with a physically crosslinked network of A-MWCNTs, which were uniformly dispersed via CNCs. Incorporating hydrogen bonding and strong electrostatic interactions within the physical network introduced reversible sacrificial bonds, significantly enhancing the hydrogel's mechanical strength. The hydrogel exhibited mechanical and sensing performance, including sufficient stretchability (431.6%), remarkable sensitivity, a gauge factor (GF) of 4.32 at 400% strain, toughness of 65.6 kJ m−3, Young's modulus of 1.5 kPa, and rapid response and recovery times of 100 msec. Furthermore, it demonstrated excellent cycling stability over 100 cycles and effective sensing capabilities across a broad strain range, from small deformations (5%) to large strains (400%). The conductivity of 0.09 S m−1, facilitated by the formation of conduction pathways through the AETAC and A-MWCNTs, further enhanced its performance. Moreover, the hydrogel exhibited practical applicability in detecting various large-scale and physiological human movements. Functioning as a wearable electronic skin, it represents a highly flexible and adaptable material suitable for applications in soft robotics, flexible sensors, and health monitoring devices.
- 18 March 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 13 (16) , 4796-4808
CNC-mediated functionalized MWCNT-reinforced double-network conductive hydrogels as smart, flexible strain and epidermic sensors for human motion monitoring
Soft, stretchable, and smart strain-sensing hydrogels have attracted significant attention due to their broad applicability in emerging fields. However, developing hydrogel-based strain-sensing materials with finely tuned mechanical and sensing properties remains challenging, primarily due to the inherent brittleness of traditionally fabricated hydrogels. In this study, a novel flexible strain- and epidermis-sensitive sensor was designed using a cellulose nanocrystal (CNC)-mediated acid functionalized multiwalled carbon nanotube (A-MWCNT)-reinforced double-network conductive hydrogel. This dual-network hydrogel system was fabricated by integrating a covalently crosslinked acrylamide (Amm) and [2-(acryloyloxy) ethyl] trimethyl-ammonium chloride (AETAC) with a physically crosslinked network of A-MWCNTs, which were uniformly dispersed via CNCs. Incorporating hydrogen bonding and strong electrostatic interactions within the physical network introduced reversible sacrificial bonds, significantly enhancing the hydrogel's mechanical strength. The hydrogel exhibited mechanical and sensing performance, including sufficient stretchability (431.6%), remarkable sensitivity, a gauge factor (GF) of 4.32 at 400% strain, toughness of 65.6 kJ m−3, Young's modulus of 1.5 kPa, and rapid response and recovery times of 100 msec. Furthermore, it demonstrated excellent cycling stability over 100 cycles and effective sensing capabilities across a broad strain range, from small deformations (5%) to large strains (400%). The conductivity of 0.09 S m−1, facilitated by the formation of conduction pathways through the AETAC and A-MWCNTs, further enhanced its performance. Moreover, the hydrogel exhibited practical applicability in detecting various large-scale and physiological human movements. Functioning as a wearable electronic skin, it represents a highly flexible and adaptable material suitable for applications in soft robotics, flexible sensors, and health monitoring devices.
- 14 January 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (10) , 5041-5055
Ex situ synergistic reinforcement of a MOF-based supramolecular polymer enables tough, highly flexible, and responsive artificial epidermis-inspired hydrogels
Metal–organic frameworks (MOFs) have numerous applications, such as energy storage, medical delivery, and wastewater remediation. Nevertheless, their applications to conductive hydrogels are restricted due to their limited dispersion, and aggregation within the network leading to limited stretchability, susceptibility to damage during cyclic activities, and reduction in the lifetime of the sensor. To overcome these issues, the selection of a suitable solvent medium, surfactant, and surface chemistry of the polymer chain in the hydrogel network are the primary factors. Herein, we created a flexible and tough, poly(lauryl methacrylate-acrylamide)@cobalt-manganese metal organic framework supramolecular composite hydrogel. Cetyltrimethylammonium bromide (CTAB), a cationic surfactant, and polymer chains facilitated the uniform distribution of the Co-Mn-MOFs. Hydrophobic interaction along with the other supramolecular interactions leads to synergistic reinforcement of the MOFs leading to uniform dispersion of the MOFs. The subsequently produced Co-Mn-MOF-based supramolecular hydrogels display remarkable anti-fatigue resistance, ultra-stretchability (1655%), toughness (447 kJ m−3), high conductivity of 0.33 S m−1, and a strain detection range from minute to large (0.5–700%) with a gauge factor of 9.47, and can be sculpted in diverse 3d-like designs. A sensor was developed and utilized to detect various human actions, and varied levels of strain and pressure, and was applied as an artificial epidermis. We believe that this approach has potential for creating wearable strain sensors, artificial skin, and MOF-based smart electronics.
- 14 January 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (10) , 5041-5055
Ex situ synergistic reinforcement of a MOF-based supramolecular polymer enables tough, highly flexible, and responsive artificial epidermis-inspired hydrogels
Metal–organic frameworks (MOFs) have numerous applications, such as energy storage, medical delivery, and wastewater remediation. Nevertheless, their applications to conductive hydrogels are restricted due to their limited dispersion, and aggregation within the network leading to limited stretchability, susceptibility to damage during cyclic activities, and reduction in the lifetime of the sensor. To overcome these issues, the selection of a suitable solvent medium, surfactant, and surface chemistry of the polymer chain in the hydrogel network are the primary factors. Herein, we created a flexible and tough, poly(lauryl methacrylate-acrylamide)@cobalt-manganese metal organic framework supramolecular composite hydrogel. Cetyltrimethylammonium bromide (CTAB), a cationic surfactant, and polymer chains facilitated the uniform distribution of the Co-Mn-MOFs. Hydrophobic interaction along with the other supramolecular interactions leads to synergistic reinforcement of the MOFs leading to uniform dispersion of the MOFs. The subsequently produced Co-Mn-MOF-based supramolecular hydrogels display remarkable anti-fatigue resistance, ultra-stretchability (1655%), toughness (447 kJ m−3), high conductivity of 0.33 S m−1, and a strain detection range from minute to large (0.5–700%) with a gauge factor of 9.47, and can be sculpted in diverse 3d-like designs. A sensor was developed and utilized to detect various human actions, and varied levels of strain and pressure, and was applied as an artificial epidermis. We believe that this approach has potential for creating wearable strain sensors, artificial skin, and MOF-based smart electronics.
- 27 December 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 504
Ultra-adhesive iontronic hydrogels strengthened by folded protein for flexible transducer with language recognition capabilities
- 27 December 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 504
Ultra-adhesive iontronic hydrogels strengthened by folded protein for flexible transducer with language recognition capabilities