Lei Xue
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lei Xue has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Yu Xue
College of Engineering, Ocean University of China, Qingdao 266100, China
9 shared publications - Jundong Wang
College of Engineering, Ocean University of China, Qingdao 266100, China
8 shared publications - Liye Zhao
School of Mechatronic Engineering, Shandong Agriculture and Engineering University, Jinan, 250100, China
7 shared publications - Bowen Zheng
China Electric Power Research Institute, Beijing, China
2 shared publications Feifei Cao
2 shared publications- Feixiang Gong
Beijing Key Laboratory of Demand Side Multi-Energy Complementary Optimization and Supply-Demand Interaction Technology, China Electric Power Research Institute Co., Ltd., Beijing 100035, China
2 shared publications
Latest Publications
- Open Access
- 14 November 2026
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 14 (22) , 2162
Computational Analysis of Wind Turbine Blade Flutter and Low-Frequency Aeroacoustic Noise
This study investigates the evolution of blade flutter and the associated low-frequency noise radiation for the flexible blades of the NREL 5 MW wind turbine. Full-process simulations spanning from turbine startup through flutter to tower-strike shutdown are performed using OpenFAST V3.1.0 under a runaway condition, where the pitch controller is disabled and the blade pitch is fixed at 0°. The results show that, during the steady operating phase prior to flutter, the flapwise, edgewise, and torsional degrees of freedom (DoFs) vibrate with a common period and fixed phase differences, with the flapwise motion leading the torsional motion. As the blade passes the tower, transient high-frequency disturbances appear in the torsional displacement. Under a linearly increasing wind speed, the vibration amplitudes grow. The three DoFs remain frequency-locked, but their phase differences gradually diminish and approach zero just before flutter onset. Meanwhile, the tower-passage-induced high-frequency disturbances in torsional displacement increase continuously in amplitude and progressively evolve into sustained vibrations. Upon entering the flutter stage, sustained high-frequency vibrations emerge in the flapwise direction at the same frequency as the high-frequency component of the torsional vibration, thereby forming a flapwise–torsional coupled vibration. In this stage, the torsional phase leads the flapwise phase. As flutter develops further, high-frequency vibrations also appear in the edgewise DoF, culminating in a three-DoF coupled vibration that marks the onset of destructive blade behavior. Furthermore, a fast low-frequency noise prediction model is established. The corrected Blade Element Momentum Theory (BEMT) is employed to compute aerodynamic loads and generate compact loading inputs, and the Ffowcs Williams–Hawkings (FW–H) equation is subsequently solved using a time-domain integration method. Time–frequency analysis demonstrates that the spectrogram of the low-frequency noise at the flutter stage exhibits a pattern similar to that of the structural displacement. Ultimately, this study demonstrates the internal consistency between the aeroacoustic model and structural instability. Given the established effectiveness of vibration monitoring, this physical mapping relationship provides a numerical proof of concept for non-contact acoustic flutter monitoring, though independent experimental validation remains necessary.
- 14 November 2026
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 14 (22) , 2162
Open AccessComputational Analysis of Wind Turbine Blade Flutter and Low-Frequency Aeroacoustic Noise
This study investigates the evolution of blade flutter and the associated low-frequency noise radiation for the flexible blades of the NREL 5 MW wind turbine. Full-process simulations spanning from turbine startup through flutter to tower-strike shutdown are performed using OpenFAST V3.1.0 under a runaway condition, where the pitch controller is disabled and the blade pitch is fixed at 0°. The results show that, during the steady operating phase prior to flutter, the flapwise, edgewise, and torsional degrees of freedom (DoFs) vibrate with a common period and fixed phase differences, with the flapwise motion leading the torsional motion. As the blade passes the tower, transient high-frequency disturbances appear in the torsional displacement. Under a linearly increasing wind speed, the vibration amplitudes grow. The three DoFs remain frequency-locked, but their phase differences gradually diminish and approach zero just before flutter onset. Meanwhile, the tower-passage-induced high-frequency disturbances in torsional displacement increase continuously in amplitude and progressively evolve into sustained vibrations. Upon entering the flutter stage, sustained high-frequency vibrations emerge in the flapwise direction at the same frequency as the high-frequency component of the torsional vibration, thereby forming a flapwise–torsional coupled vibration. In this stage, the torsional phase leads the flapwise phase. As flutter develops further, high-frequency vibrations also appear in the edgewise DoF, culminating in a three-DoF coupled vibration that marks the onset of destructive blade behavior. Furthermore, a fast low-frequency noise prediction model is established. The corrected Blade Element Momentum Theory (BEMT) is employed to compute aerodynamic loads and generate compact loading inputs, and the Ffowcs Williams–Hawkings (FW–H) equation is subsequently solved using a time-domain integration method. Time–frequency analysis demonstrates that the spectrogram of the low-frequency noise at the flutter stage exhibits a pattern similar to that of the structural displacement. Ultimately, this study demonstrates the internal consistency between the aeroacoustic model and structural instability. Given the established effectiveness of vibration monitoring, this physical mapping relationship provides a numerical proof of concept for non-contact acoustic flutter monitoring, though independent experimental validation remains necessary.
- Open Access
- 26 February 2026
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 14 (5) , 438
Stage-Aware Reconstruction of Typhoon Inflow for Offshore Wind Turbines Using WRF and TurbSim
Accurate typhoon inflow characterization is essential for offshore wind turbine safety in typhoon-prone regions. This study presents a physics-informed WRF–TurbSim framework that reconstructs rotor-relevant, stage-aware inflow fields for Typhoon In-Fa (2021) by mapping mesoscale stability and turbulence diagnostics into a User-Defined von Kármán model. Spectral and coherence checks confirm consistency with the imposed constraints and show pronounced regime dependence: low-frequency coherence decay remains near IEC neutral behavior, whereas high-frequency decay weakens substantially during the stable eye stage. The results suggest that neutral coherence assumptions may be unreliable in strongly stable typhoon regimes, motivating stage-aware inflow characterization for engineering applications.
- 26 February 2026
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 14 (5) , 438
Open AccessStage-Aware Reconstruction of Typhoon Inflow for Offshore Wind Turbines Using WRF and TurbSim
Accurate typhoon inflow characterization is essential for offshore wind turbine safety in typhoon-prone regions. This study presents a physics-informed WRF–TurbSim framework that reconstructs rotor-relevant, stage-aware inflow fields for Typhoon In-Fa (2021) by mapping mesoscale stability and turbulence diagnostics into a User-Defined von Kármán model. Spectral and coherence checks confirm consistency with the imposed constraints and show pronounced regime dependence: low-frequency coherence decay remains near IEC neutral behavior, whereas high-frequency decay weakens substantially during the stable eye stage. The results suggest that neutral coherence assumptions may be unreliable in strongly stable typhoon regimes, motivating stage-aware inflow characterization for engineering applications.
- 14 February 2026
- Published by Elsevier in Ocean Engineering
- Vol. 352
Dynamic response of a floating offshore wind turbine under multi-stage typhoon conditions: A case study of super typhoon In-Fa
- 14 February 2026
- Published by Elsevier in Ocean Engineering
- Vol. 352
Dynamic response of a floating offshore wind turbine under multi-stage typhoon conditions: A case study of super typhoon In-Fa
- Open Access
- 8 September 2025
- Published by Elsevier in Applied Energy
- Vol. 401
Statistical analysis of floating hybrid wind–wave energy systems
- 8 September 2025
- Published by Elsevier in Applied Energy
- Vol. 401
Open AccessStatistical analysis of floating hybrid wind–wave energy systems
- Open Access
- 4 November 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (11) , 1988
A Numerical Investigation on the Aeroacoustic Noise Emission from Offshore Wind Turbine Wake Interference
Offshore wind turbine (WT) wake interference will reduce power generation and increase the fatigue loads of downstream WTs. Wake interference detection based on aeroacoustic noise is believed to solve these challenges in offshore wind farms. However, aeroacoustic noise is closely related to the aerodynamics around WT blades, and the acoustic detection method requires the mastery of noise emission characteristics. In this paper, FAST.Farm, combined with the acoustic model in OpenFAST, is utilized to investigate the acoustic noise emission characteristics from two 3.4 MW-130 WTs with wake interference. Multi-microphone positions were investigated for the optimal reception selection under 8 m/s and 12 m/s wind speeds with a typical offshore atmospheric turbulence intensity of 6%. The numerical simulation results indicate that wake deficit reduces the total noise emission by about 6 dBA in the overall sound pressure level (OASPL) at 8 m/s, while wake turbulence marginally increases it and its fluctuation. There is a mutual influence between these effects, and the wake deficit effect can be 100% compensated for in the OASPL at 12 m/s. Additionally, downstream observer locations are suggested based on comparisons. These investigations provide new insights into wake interference in offshore wind farms.
- 4 November 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (11) , 1988
Open AccessA Numerical Investigation on the Aeroacoustic Noise Emission from Offshore Wind Turbine Wake Interference
Offshore wind turbine (WT) wake interference will reduce power generation and increase the fatigue loads of downstream WTs. Wake interference detection based on aeroacoustic noise is believed to solve these challenges in offshore wind farms. However, aeroacoustic noise is closely related to the aerodynamics around WT blades, and the acoustic detection method requires the mastery of noise emission characteristics. In this paper, FAST.Farm, combined with the acoustic model in OpenFAST, is utilized to investigate the acoustic noise emission characteristics from two 3.4 MW-130 WTs with wake interference. Multi-microphone positions were investigated for the optimal reception selection under 8 m/s and 12 m/s wind speeds with a typical offshore atmospheric turbulence intensity of 6%. The numerical simulation results indicate that wake deficit reduces the total noise emission by about 6 dBA in the overall sound pressure level (OASPL) at 8 m/s, while wake turbulence marginally increases it and its fluctuation. There is a mutual influence between these effects, and the wake deficit effect can be 100% compensated for in the OASPL at 12 m/s. Additionally, downstream observer locations are suggested based on comparisons. These investigations provide new insights into wake interference in offshore wind farms.
- Open Access
- 12 April 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (4) , 647
Rapid Estimation Model for Wake Disturbances in Offshore Floating Wind Turbines
The precise wake model is crucial for accurately estimating wind farm loads and power, playing a key role in wake control within wind farms. This study proposes a segmented dual-Gaussian wake model, which is built upon existing dual-Gaussian wake models but places greater emphasis on the influence of initial wake generation and evolution processes on the wind speed profile in the near-wake region. The enhanced model optimizes the wake speed profile in the near-wake region and improves the accuracy of wake diffusion throughout the entire flow field. Furthermore, the optimized dual-Gaussian wake model is utilized to estimate the power output and blade root vibration loads in offshore wind farms. Through comparative analysis of high-fidelity simulation results and actual measurement data, the accuracy of the optimized dual-Gaussian wake model is validated. This approach offers high computational efficiency and provides valuable insights for load fluctuations and power estimation, thereby advancing the development of wake control strategies rapidly.
- 12 April 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (4) , 647
Open AccessRapid Estimation Model for Wake Disturbances in Offshore Floating Wind Turbines
The precise wake model is crucial for accurately estimating wind farm loads and power, playing a key role in wake control within wind farms. This study proposes a segmented dual-Gaussian wake model, which is built upon existing dual-Gaussian wake models but places greater emphasis on the influence of initial wake generation and evolution processes on the wind speed profile in the near-wake region. The enhanced model optimizes the wake speed profile in the near-wake region and improves the accuracy of wake diffusion throughout the entire flow field. Furthermore, the optimized dual-Gaussian wake model is utilized to estimate the power output and blade root vibration loads in offshore wind farms. Through comparative analysis of high-fidelity simulation results and actual measurement data, the accuracy of the optimized dual-Gaussian wake model is validated. This approach offers high computational efficiency and provides valuable insights for load fluctuations and power estimation, thereby advancing the development of wake control strategies rapidly.
- Open Access
- 25 June 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (7) , 1288
Study on Mitigation of Wake Interference by Combined Control of Yaw Misalignment and Pitch
Yaw misalignment can make a wake steer, which is an effective method to increase the power of wind farms but it also increases the fatigue load of the turbines. In this paper, the combination of yaw offset and pitch control (CYMP) is studied to analyse the potential mitigation of wake, focusing on the wind velocity and turbulence of the wake distribution, power increment, and fatigue load reduction. The simulation case study shows that the method of CYMP can reduce the fatigue load by 10.29% and increase the total power by 1.7% compared with only wake steering in FAST.Fram. The Collaborative MPC (CoMPC) method based on CYMP is proposed to the real-time wake control in this research, which can increase power by more than 2% and reduce thrust by more than 4% than greedy control under 10 m/s turbulent wind.
- 25 June 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (7) , 1288
Open AccessStudy on Mitigation of Wake Interference by Combined Control of Yaw Misalignment and Pitch
Yaw misalignment can make a wake steer, which is an effective method to increase the power of wind farms but it also increases the fatigue load of the turbines. In this paper, the combination of yaw offset and pitch control (CYMP) is studied to analyse the potential mitigation of wake, focusing on the wind velocity and turbulence of the wake distribution, power increment, and fatigue load reduction. The simulation case study shows that the method of CYMP can reduce the fatigue load by 10.29% and increase the total power by 1.7% compared with only wake steering in FAST.Fram. The Collaborative MPC (CoMPC) method based on CYMP is proposed to the real-time wake control in this research, which can increase power by more than 2% and reduce thrust by more than 4% than greedy control under 10 m/s turbulent wind.
- Open Access
- 13 June 2023
- Published by MDPI AG in Preprints.org
Study on Mitigation of Wake Interference by Combined Control of Yaw Misalignment and Pitch
Yaw misalignment can make a wake steer, which is an effective method to increase the power of wind farms, but it also increases the fatigue load of the turbines. In this paper, the method of combining yaw misalignment and pitch control (CYMP) is proposed to investigate the potential to mitigate wake interference, the wind velocity distribution and turbulence distribution in the wake, as well as the power and load changes of the wind turbine are studied, focusing on power in-crement and fatigue damage reduction. Although some studies have found that the method of CYMP are beneficial to increase power generation and reduce fatigue loads, there are no papers that have made a detailed analysis of the effects of wake turbulence, wind speed distribution, power, especially fatigue damage under this control. Simulation tool FAST.Farm is used to model and analyze wind farms, obtain the variation details of wake and provide simulation data for calculating power and fatigue load. The pitch control brings bias to the CYMP optimization results was neglected, the case studies show that the method of CYMP can reduce the fatigue load by 10.29% and increase the total power by 1.7% compared with only wake steering. The Model Predictive Control collaborative method based on CYMP is proposed, which can increase power by more than 2% and reduce thrust by more than 4% under 10m/s turbulent wind.
- 13 June 2023
- Published by MDPI AG in Preprints.org
Open AccessStudy on Mitigation of Wake Interference by Combined Control of Yaw Misalignment and Pitch
Yaw misalignment can make a wake steer, which is an effective method to increase the power of wind farms, but it also increases the fatigue load of the turbines. In this paper, the method of combining yaw misalignment and pitch control (CYMP) is proposed to investigate the potential to mitigate wake interference, the wind velocity distribution and turbulence distribution in the wake, as well as the power and load changes of the wind turbine are studied, focusing on power in-crement and fatigue damage reduction. Although some studies have found that the method of CYMP are beneficial to increase power generation and reduce fatigue loads, there are no papers that have made a detailed analysis of the effects of wake turbulence, wind speed distribution, power, especially fatigue damage under this control. Simulation tool FAST.Farm is used to model and analyze wind farms, obtain the variation details of wake and provide simulation data for calculating power and fatigue load. The pitch control brings bias to the CYMP optimization results was neglected, the case studies show that the method of CYMP can reduce the fatigue load by 10.29% and increase the total power by 1.7% compared with only wake steering. The Model Predictive Control collaborative method based on CYMP is proposed, which can increase power by more than 2% and reduce thrust by more than 4% under 10m/s turbulent wind.
- Open Access
- 13 January 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (1) , 212
Progress of Combined Wind and Wave Energy Harvesting Devices and Related Coupling Simulation Techniques
The use of combined wind and wave energy harvesting devices (CWWHDs) is an effective way to synergistically capture offshore wind and wave energy. However, the form of combined energy harvesting and coupled simulation techniques limit the development of CWWHDs. This paper classifies the existing CWWHDs based on wave energy converters and offshore wind turbines, summarizes the theoretical background and implementation forms of the numerical simulation of CWWHDs, and focuses on the technical details of wind-wave coupling and multi-body coupling simulation, which fills the gap in the research of the wind-wave coupling and multi-body coupling numerical simulation of CWWHDs. Finally, the current research focus and development direction of CWWHDs and their numerical simulation technology are summarized to provide a reference for the future development and application of CWWHDs and numerical simulation technology.
- 13 January 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (1) , 212
Open AccessProgress of Combined Wind and Wave Energy Harvesting Devices and Related Coupling Simulation Techniques
The use of combined wind and wave energy harvesting devices (CWWHDs) is an effective way to synergistically capture offshore wind and wave energy. However, the form of combined energy harvesting and coupled simulation techniques limit the development of CWWHDs. This paper classifies the existing CWWHDs based on wave energy converters and offshore wind turbines, summarizes the theoretical background and implementation forms of the numerical simulation of CWWHDs, and focuses on the technical details of wind-wave coupling and multi-body coupling simulation, which fills the gap in the research of the wind-wave coupling and multi-body coupling numerical simulation of CWWHDs. Finally, the current research focus and development direction of CWWHDs and their numerical simulation technology are summarized to provide a reference for the future development and application of CWWHDs and numerical simulation technology.