Michael Schröter
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Michael Schröter has a total of 90 co-authors. Here are the top co-authors by number of shared publications:
- Markus Müller
Chair for Electron Devices and Integrated Circuits, Technical University Dresden, Dresden, Germany
11 shared publications - Anibal Pacheco-Sanchez
Departamento de Electrnica y Tecnologa de Computadores, Universidad de Granada, Granada, Spain
5 shared publications Paulius Sakalas
Chair for Electron Devices and Integrated Circuits (CEDIC), Technische Universitt Dresden, Dresden, Germany
5 shared publications- Xiaodi Jin
Chair for Electron Devices and Integrated Circuits, Dresden University of Technology (TU Dresden), Dresden, Germany
5 shared publications - Christoph Jungemann
RWTH Aachen University
4 shared publications - Manojkumar Annamalai
Chair for Electron Devices and Integrated Circuits (CEDIC), Technische Universitt Dresden, Dresden, Germany
4 shared publications
Latest Publications
- 22 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. 26 (2) , 549-555
Aiding Thermal-Aware Design of HBTs Through Nonlinear Electrothermal Modeling
This paper deals with compact electrothermal (ET) models accounting for nonlinear thermal effects in heterojunction bipolar transistors (HBTs). In a previous investigation, the Authors have demonstrated that the thermal resistance formulations embedded in advanced compact bipolar transistor models fall short in describing such nonlinear effects over wide ranges of operative conditions. Here, a formulation based on the single-semiconductor theory is proposed and implemented in HICUM/L2, the most adopted compact model in the radiofrequency (RF) industry. The accuracy of the proposed modeling approach is experimentally verified by comparison with measurements performed on a state-of-the-art InP/InGaAs HBT for RF applications. Once the accuracy of such a formulation is assessed, the improved HICUM/L2 is exploited to estimate the safe operating area (SOA) and the junction temperature of the HBT under test.
- 22 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. 26 (2) , 549-555
Aiding Thermal-Aware Design of HBTs Through Nonlinear Electrothermal Modeling
This paper deals with compact electrothermal (ET) models accounting for nonlinear thermal effects in heterojunction bipolar transistors (HBTs). In a previous investigation, the Authors have demonstrated that the thermal resistance formulations embedded in advanced compact bipolar transistor models fall short in describing such nonlinear effects over wide ranges of operative conditions. Here, a formulation based on the single-semiconductor theory is proposed and implemented in HICUM/L2, the most adopted compact model in the radiofrequency (RF) industry. The accuracy of the proposed modeling approach is experimentally verified by comparison with measurements performed on a state-of-the-art InP/InGaAs HBT for RF applications. Once the accuracy of such a formulation is assessed, the improved HICUM/L2 is exploited to estimate the safe operating area (SOA) and the junction temperature of the HBT under test.
- 7 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (6) , 2898-2905
Analysis of Multivalley Phenomena in InP/GaAsSb DHBTs Using the Boltzmann Transport Equation
Electron transport in an indium phosphide (InP)/GaAsSb double heterojunction bipolar transistor (DHBT) is investigated by means of self-consistent Boltzmann transport equation (BTE) simulations. For this purpose, the doping profile and material parameters were calibrated to measurement data of a reference technology, leading to very good agreement between simulated and measured terminal characteristics. A rigorous analysis of the transit time components reveals a dominant role of base (τmB) and BC depletion region transit time (τBCi). It is shown that intervalley transfer (ivt) between $\Gv$ and $\Lv$ valley significantly increases τmB, a useful insight for future technology optimization. Small-signal analysis is leveraged to understand the fundamental high-frequency limitations of the technology.
- 7 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (6) , 2898-2905
Analysis of Multivalley Phenomena in InP/GaAsSb DHBTs Using the Boltzmann Transport Equation
Electron transport in an indium phosphide (InP)/GaAsSb double heterojunction bipolar transistor (DHBT) is investigated by means of self-consistent Boltzmann transport equation (BTE) simulations. For this purpose, the doping profile and material parameters were calibrated to measurement data of a reference technology, leading to very good agreement between simulated and measured terminal characteristics. A rigorous analysis of the transit time components reveals a dominant role of base (τmB) and BC depletion region transit time (τBCi). It is shown that intervalley transfer (ivt) between $\Gv$ and $\Lv$ valley significantly increases τmB, a useful insight for future technology optimization. Small-signal analysis is leveraged to understand the fundamental high-frequency limitations of the technology.
- 28 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (7) , 1045-1048
A 232–282 GHz Frequency Quadrupler in 130-nm SiGe HBT SG13G3Cu Technology
A 232–282 frequency quadrupler has been designed and fabricated using Leibniz Institute for High Performance Microelectronics (IHP’s) highest performance 130-nm SiGe BiCMOS technology, featuring $f_{T}$ / $f_{\text {MAX}}$ values of 470/650 GHz. It consists of stacked Gilbert-cell (GC) doublers, with neutralization capacitances in the transconductance pair to enhance conversion gain (CG), and a miniaturized balun structure for the low frequency differential input signal generation. The frequency quadrupler achieves a peak output power of –4.5dBm, corresponding to a 3.5 dB CG at 236 GHz, with a 0.56% dc-to-RF efficiency and a 3 dB bandwidth of 50 GHz ranging from 232 to 282 GHz. This performance is realized with a dc power consumption of only 63 mW and a chip area of 0.49 mm2.
- 28 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (7) , 1045-1048
A 232–282 GHz Frequency Quadrupler in 130-nm SiGe HBT SG13G3Cu Technology
A 232–282 frequency quadrupler has been designed and fabricated using Leibniz Institute for High Performance Microelectronics (IHP’s) highest performance 130-nm SiGe BiCMOS technology, featuring $f_{T}$ / $f_{\text {MAX}}$ values of 470/650 GHz. It consists of stacked Gilbert-cell (GC) doublers, with neutralization capacitances in the transconductance pair to enhance conversion gain (CG), and a miniaturized balun structure for the low frequency differential input signal generation. The frequency quadrupler achieves a peak output power of –4.5dBm, corresponding to a 3.5 dB CG at 236 GHz, with a 0.56% dc-to-RF efficiency and a 3 dB bandwidth of 50 GHz ranging from 232 to 282 GHz. This performance is realized with a dc power consumption of only 63 mW and a chip area of 0.49 mm2.
- 17 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 25 (10) , 38-53
Indium-Phosphide Transistors: A Review of Current State and Suitability for Commercial > 100-GHz Wireless Communication Systems
Carriers are currently introducing 5G wireless systems at sub-6, 28, 38, 57–71, and 71–86 GHz. As 5G is commercially deployed, research into the next-generation communication systems (6G), expected to be 100–340 GHz, is beginning. Power-efficient systems operating at such high frequencies require RF front ends with transistor RF figures of merit (FOMs) such as transit frequency ${f}_{\tau}$ and maximum oscillation frequency ${f}_{\max}$ in excess of 500 GHz. Indium-phosphide (InP) heterojunction bipolar transistors (HBTs) and high-electron mobility transistors (HEMTs) are promising technologies for these extreme frequency applications.
- 17 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 25 (10) , 38-53
Indium-Phosphide Transistors: A Review of Current State and Suitability for Commercial > 100-GHz Wireless Communication Systems
Carriers are currently introducing 5G wireless systems at sub-6, 28, 38, 57–71, and 71–86 GHz. As 5G is commercially deployed, research into the next-generation communication systems (6G), expected to be 100–340 GHz, is beginning. Power-efficient systems operating at such high frequencies require RF front ends with transistor RF figures of merit (FOMs) such as transit frequency ${f}_{\tau}$ and maximum oscillation frequency ${f}_{\max}$ in excess of 500 GHz. Indium-phosphide (InP) heterojunction bipolar transistors (HBTs) and high-electron mobility transistors (HEMTs) are promising technologies for these extreme frequency applications.
- Open Access
- 4 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (8) , 1003-1006
Record 35% Power-Added Efficiency at 170 GHz in 300-nm InP/GaAsSb DHBTs
We report the 170-GHz power performance of multifinger common–emitter (CE) 300-nm indium phosphide (InP)/GaAsSb double heterojunction bipolar transistors (DHBTs). Devices with one-, two-, and four-finger(s) with 7.5-, 10-, or 12.5- $\mu$ m-long emitter fingers were simultaneously fabricated. A record power-added efficiency PAE $=$ 35% is measured for single-finger 7.5- $\mu$ m-long DHBTs with a saturated matched output power $P_{\mathrm{OUT,SAT}}$ $=$ 9.5 dBm. A $P_{\mathrm{OUT,SAT}}$ $>$ 12 and $>$ 14.5 dBm with peak PAE $=$ 25% and 22% is delivered from two-and four-finger 10- $\mu$ m-long DHBTs, respectively. To the best of our knowledge, 35% is the highest PAE reported for any PA/PA cell in any transistor technology over the entire G-band range. We attribute the high efficiency achieved in this study to the exceptionally high gain transistors in the (sub)-millimeter-wave (mm-wave) range, as well as the advantageous combination of high breakdown and low knee voltages. This work details the first G-band power characterization of single-and multi-finger GaAsSb-based DHBTs—it is also the first such study in any InP DHBT. An all-technology record Class-A G-band PAE is achieved with a minimal reduction with respect to W-band peak PAE levels. An HICUM-based large-signal model verifies the mm-wave RF measurements.
- 4 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (8) , 1003-1006
Open AccessRecord 35% Power-Added Efficiency at 170 GHz in 300-nm InP/GaAsSb DHBTs
We report the 170-GHz power performance of multifinger common–emitter (CE) 300-nm indium phosphide (InP)/GaAsSb double heterojunction bipolar transistors (DHBTs). Devices with one-, two-, and four-finger(s) with 7.5-, 10-, or 12.5- $\mu$ m-long emitter fingers were simultaneously fabricated. A record power-added efficiency PAE $=$ 35% is measured for single-finger 7.5- $\mu$ m-long DHBTs with a saturated matched output power $P_{\mathrm{OUT,SAT}}$ $=$ 9.5 dBm. A $P_{\mathrm{OUT,SAT}}$ $>$ 12 and $>$ 14.5 dBm with peak PAE $=$ 25% and 22% is delivered from two-and four-finger 10- $\mu$ m-long DHBTs, respectively. To the best of our knowledge, 35% is the highest PAE reported for any PA/PA cell in any transistor technology over the entire G-band range. We attribute the high efficiency achieved in this study to the exceptionally high gain transistors in the (sub)-millimeter-wave (mm-wave) range, as well as the advantageous combination of high breakdown and low knee voltages. This work details the first G-band power characterization of single-and multi-finger GaAsSb-based DHBTs—it is also the first such study in any InP DHBT. An all-technology record Class-A G-band PAE is achieved with a minimal reduction with respect to W-band peak PAE levels. An HICUM-based large-signal model verifies the mm-wave RF measurements.
- Open Access
- 28 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (5) , 544-547
A Low-Power W-Band SiGe-HBT Double-Balanced Up-Conversion Mixer With an Integrated Second-Order IF Low-Pass Filter
A low-power $W$ -band (75–110 GHz) double-balanced up-conversion mixer using a 0.13 $\mu$ m SiGe:C BiCMOS technology with $f_\mathrm{T}/f_\mathrm{max}=250/370~\mathrm{GHz}$ is presented. The mixer includes on-chip transformer baluns at the LO and RF ports for on-wafer characterization. At 91.3 GHz, the active mixer achieves a single sideband (SSB) power conversion gain of 4.1 dB with a 3-dB RF bandwidth (BW) of 30 GHz from 78.1 to 108.3 GHz, covering almost the entire $W$ -band. The linearity performance, characterized by $\mathrm{OP}_{1\mathrm{dB}}$ and $P_{\mathrm{sat}}$ , is 0.6 and 1.8 dBm, respectively while consuming only 11 mW from a 1.8 V supply. Moreover, a second-order IF $LC$ low-pass filter (LPF) with a cutoff frequency of 1.4 GHz is integrated to provide an additional spurious suppression of $\sim$ 12 and $\sim$ 19 dB at the second and third harmonic of the fundamental IF (i.e., 1.25 GHz). The overall chip area, including the IF LPF is 990 $\times$ 540 $\mu$ m (0.53 mm $^2$ ). To the best of authors’ knowledge, the active up-conversion mixer achieves the lowest power consumption along with the highest $\mathrm{OP}_{1\mathrm{dB}}$ / $P_{\mathrm{sat}}$ and 3-dB RF BW reported among all prior published $W$ -band SiGe-HBT up-conversion mixers.
- 28 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (5) , 544-547
Open AccessA Low-Power W-Band SiGe-HBT Double-Balanced Up-Conversion Mixer With an Integrated Second-Order IF Low-Pass Filter
A low-power $W$ -band (75–110 GHz) double-balanced up-conversion mixer using a 0.13 $\mu$ m SiGe:C BiCMOS technology with $f_\mathrm{T}/f_\mathrm{max}=250/370~\mathrm{GHz}$ is presented. The mixer includes on-chip transformer baluns at the LO and RF ports for on-wafer characterization. At 91.3 GHz, the active mixer achieves a single sideband (SSB) power conversion gain of 4.1 dB with a 3-dB RF bandwidth (BW) of 30 GHz from 78.1 to 108.3 GHz, covering almost the entire $W$ -band. The linearity performance, characterized by $\mathrm{OP}_{1\mathrm{dB}}$ and $P_{\mathrm{sat}}$ , is 0.6 and 1.8 dBm, respectively while consuming only 11 mW from a 1.8 V supply. Moreover, a second-order IF $LC$ low-pass filter (LPF) with a cutoff frequency of 1.4 GHz is integrated to provide an additional spurious suppression of $\sim$ 12 and $\sim$ 19 dB at the second and third harmonic of the fundamental IF (i.e., 1.25 GHz). The overall chip area, including the IF LPF is 990 $\times$ 540 $\mu$ m (0.53 mm $^2$ ). To the best of authors’ knowledge, the active up-conversion mixer achieves the lowest power consumption along with the highest $\mathrm{OP}_{1\mathrm{dB}}$ / $P_{\mathrm{sat}}$ and 3-dB RF BW reported among all prior published $W$ -band SiGe-HBT up-conversion mixers.
- 15 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. 24 (1) , 20-32
Characterization, Analysis, and Modeling of Long-Term RF Reliability and Degradation of SiGe HBTs for High Power Density Applications
This paper aims at determining RF operating limits of SiGe HBTs. Long-term stress tests consisting of RF large-signal stress and periodic measurements of small-signal parameters are performed. Reliable dynamic large-signal transistor operation is demonstrated beyond conventional static safe operating limits. In addition, RF operating limits are identified and degradation of SiGe HBTs accelerated by extreme RF stress is systematically characterized, analyzed and modeled. RF-stress-caused degradation is shown to significantly affect the collector current and demonstrated to be different from electrothermal breakdown caused by DC stress. A modeling approach for estimating SiGe HBT degradation under RF large-signal operating conditions is proposed and shown to agree very well with experimental data.
- 15 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. 24 (1) , 20-32
Characterization, Analysis, and Modeling of Long-Term RF Reliability and Degradation of SiGe HBTs for High Power Density Applications
This paper aims at determining RF operating limits of SiGe HBTs. Long-term stress tests consisting of RF large-signal stress and periodic measurements of small-signal parameters are performed. Reliable dynamic large-signal transistor operation is demonstrated beyond conventional static safe operating limits. In addition, RF operating limits are identified and degradation of SiGe HBTs accelerated by extreme RF stress is systematically characterized, analyzed and modeled. RF-stress-caused degradation is shown to significantly affect the collector current and demonstrated to be different from electrothermal breakdown caused by DC stress. A modeling approach for estimating SiGe HBT degradation under RF large-signal operating conditions is proposed and shown to agree very well with experimental data.
- 15 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (1) , 61-64
A Cryogenic 561 μW Ultralow-Power 56–62 GHz Low Noise Amplifier in 130-nm SiGe HBTs
An ultralow-power millimeter-wave (mm-wave) cryogenic low noise amplifier (LNA) has been designed and fabricated in a 130 nm SiGe HBT technology. Measurements at 4.3 K show a peak gain of 18.3 dB at 58 GHz and a simulated average noise figure of 1.28 dB across the 56–62 GHz frequency band. The respective power consumption of just 561 $\mu$ W is, to the best of the authors’ knowledge, the lowest one reported so far for a cryogenic mm-wave LNA. The circuit design has been enabled by a HICUM/L2 compact model with various physics-based extensions for capturing the low-temperature HBT behavior. The model shows good accuracy over a large bias and frequency range for temperatures down to 4.3 K.
- 15 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (1) , 61-64
A Cryogenic 561 μW Ultralow-Power 56–62 GHz Low Noise Amplifier in 130-nm SiGe HBTs
An ultralow-power millimeter-wave (mm-wave) cryogenic low noise amplifier (LNA) has been designed and fabricated in a 130 nm SiGe HBT technology. Measurements at 4.3 K show a peak gain of 18.3 dB at 58 GHz and a simulated average noise figure of 1.28 dB across the 56–62 GHz frequency band. The respective power consumption of just 561 $\mu$ W is, to the best of the authors’ knowledge, the lowest one reported so far for a cryogenic mm-wave LNA. The circuit design has been enabled by a HICUM/L2 compact model with various physics-based extensions for capturing the low-temperature HBT behavior. The model shows good accuracy over a large bias and frequency range for temperatures down to 4.3 K.
- 3 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (1) , 30-36
A Physics-Based Compact Model for the Static Drain Current in Heterojunction Barrier CNTFETs—Part II: Scattering, High-Field Effects, and Model Verification
In this second part, the drain-current formulation for hetero-barrier (HB) carbon nanotube field-effect transistors (CNTFETs) is extended by considering the impact of phonon scattering along the channel. Computationally efficient expressions for the scattering-related transmission factor and the energy-averaged mean free path (MFP) are derived. Drain-induced barrier lowering (DIBL) is also accounted for in the model. The new drain-current formulation is then compared to data from both augmented drift diffusion (DD)–based device simulations of a CNTFET unit cell structure and measurements of multitube high-frequency (HF) CNTFETs. A dc Gummel symmetry test (GST) has been successfully performed.
- 3 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (1) , 30-36
A Physics-Based Compact Model for the Static Drain Current in Heterojunction Barrier CNTFETs—Part II: Scattering, High-Field Effects, and Model Verification
In this second part, the drain-current formulation for hetero-barrier (HB) carbon nanotube field-effect transistors (CNTFETs) is extended by considering the impact of phonon scattering along the channel. Computationally efficient expressions for the scattering-related transmission factor and the energy-averaged mean free path (MFP) are derived. Drain-induced barrier lowering (DIBL) is also accounted for in the model. The new drain-current formulation is then compared to data from both augmented drift diffusion (DD)–based device simulations of a CNTFET unit cell structure and measurements of multitube high-frequency (HF) CNTFETs. A dc Gummel symmetry test (GST) has been successfully performed.
- 1 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (1) , 23-29
A Physics-Based Compact Model for the Static Drain Current in Heterojunction Barrier CNTFETs—Part I: Barrier-Related Current
A physics-based compact analytical formulation for the static drain current in heterojunction barrier (HB) carbon nanotube field-effect transistors is derived by incorporating the tunneling current through the barriers. This enables to capture the distinct curve shapes of device characteristics as compared to devices without HBs. For solving the Landauer integral a Gaussian-shaped surrogate function for the energy-dependent integrand is utilized. Moreover, the impact of multiple reflections between source and drain barrier is accounted for. The new formulation includes a smooth transition from thermionic emission-based transport in the subthreshold region to tunneling-dominated transport in the above-threshold regime.
- 1 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (1) , 23-29
A Physics-Based Compact Model for the Static Drain Current in Heterojunction Barrier CNTFETs—Part I: Barrier-Related Current
A physics-based compact analytical formulation for the static drain current in heterojunction barrier (HB) carbon nanotube field-effect transistors is derived by incorporating the tunneling current through the barriers. This enables to capture the distinct curve shapes of device characteristics as compared to devices without HBs. For solving the Landauer integral a Gaussian-shaped surrogate function for the energy-dependent integrand is utilized. Moreover, the impact of multiple reflections between source and drain barrier is accounted for. The new formulation includes a smooth transition from thermionic emission-based transport in the subthreshold region to tunneling-dominated transport in the above-threshold regime.