Matthias Kruck
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Matthias Kruck has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Benjamin Wolfgang Schick
Institute of Electrochemistry Ulm University Albert-Einstein-Allee 47 89081 Ulm Germany
5 shared publications - Matthias Uhl
Institute of Electrochemistry Ulm University Albert-Einstein-Allee 47 89081 Ulm Germany
5 shared publications - Timo Jacob
Institute of Electrochemistry Ulm University Ulm Germany
5 shared publications - Erik Jaemstorp Berg
Uppsala University
3 shared publications - Xu Hou
Department of Chemistry – Ångström Laboratory Structural Chemistry Uppsala University Lägerhyddsvägen 1 752 37 Uppsala Sweden
3 shared publications - Alexander Fuoss
Institute of Electrochemistry Ulm University Albert-Einstein-Allee 47 89081 Ulm Germany
2 shared publications
Latest Publications
- Open Access
- 19 November 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (52)
Einfluss von Chlorid und Elektrolytstabilität auf die Bildung von Passivierungsschichten an der Negativen Elektrode von Mg Batterien: eine operando EQCM‐D Studie
Wieder aufladbare Magnesium Batterien sind vielversprechend für die zukünftige Energiespeicherung. Ihre praktische Anwendung wird jedoch unter anderem durch niedrige Coulomb'sche Effizienzen bei der Magnesiumabscheidung und ‐auflösung behindert. Grundlegende Prozesse wie die Bildung, Struktur und Stabilität von Passivierungsschichten und der Einfluss verschiedener Elektrolytbestandteile auf diese sind immer noch nicht vollständig verstanden. In dieser Studie erhalten wir einzigartige Einblicke in die ersten Magnesiumabscheidungs‐ und auflösungszyklen, indem wir Magnesium bis(trifluoromethansulfonyl)imid (Mg(TFSI)2)‐ und Magnesium tetrakis(hexafluoroisopropyloxy)borat (Mg[B(hfip)4]2)‐basierte Elektrolyte, jeweils mit und ohne MgCl2, operando auf Goldelektroden mittels hochempfindlicher elektrochemischer Quarzmikrowaage mit Dissipationsmessung (EQCM−D) unter Anwendung hydrodynamischer Spektroskopie vergleichen. Mit den stabilen Mg[B(hfip)4]2‐basierten Elektrolyten ist hocheffizientes und Interphasen‐freies Zyklieren möglich, während die Bildung von Passivierungsschichten Elektrolytverunreinigungen zugerechnet werden kann. Diese bilden sich und degradieren während des sogenannten Konditionierungsprozesses. Mit dem reaktiveren Mg(TFSI)2‐basierten Elektrolyten wachsen während des Zyklierens dicke Passivierungsschichten mit kleinen Poren. Wir zeigen, dass die Zugabe von MgCl2 bei diesen Elektrolyten die Menge an passiviertem Mg verringert und die stromlose Auflösung der Passivierungsschicht beschleunigt. Dies hat einen positiven Effekt, da wir das effizienteste Zyklieren und die gleichmäßigste Abscheidung beobachten, wenn sich keine Interphase auf der Elektrode befindet.
- 19 November 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (52)
Open AccessEinfluss von Chlorid und Elektrolytstabilität auf die Bildung von Passivierungsschichten an der Negativen Elektrode von Mg Batterien: eine operando EQCM‐D Studie
Wieder aufladbare Magnesium Batterien sind vielversprechend für die zukünftige Energiespeicherung. Ihre praktische Anwendung wird jedoch unter anderem durch niedrige Coulomb'sche Effizienzen bei der Magnesiumabscheidung und ‐auflösung behindert. Grundlegende Prozesse wie die Bildung, Struktur und Stabilität von Passivierungsschichten und der Einfluss verschiedener Elektrolytbestandteile auf diese sind immer noch nicht vollständig verstanden. In dieser Studie erhalten wir einzigartige Einblicke in die ersten Magnesiumabscheidungs‐ und auflösungszyklen, indem wir Magnesium bis(trifluoromethansulfonyl)imid (Mg(TFSI)2)‐ und Magnesium tetrakis(hexafluoroisopropyloxy)borat (Mg[B(hfip)4]2)‐basierte Elektrolyte, jeweils mit und ohne MgCl2, operando auf Goldelektroden mittels hochempfindlicher elektrochemischer Quarzmikrowaage mit Dissipationsmessung (EQCM−D) unter Anwendung hydrodynamischer Spektroskopie vergleichen. Mit den stabilen Mg[B(hfip)4]2‐basierten Elektrolyten ist hocheffizientes und Interphasen‐freies Zyklieren möglich, während die Bildung von Passivierungsschichten Elektrolytverunreinigungen zugerechnet werden kann. Diese bilden sich und degradieren während des sogenannten Konditionierungsprozesses. Mit dem reaktiveren Mg(TFSI)2‐basierten Elektrolyten wachsen während des Zyklierens dicke Passivierungsschichten mit kleinen Poren. Wir zeigen, dass die Zugabe von MgCl2 bei diesen Elektrolyten die Menge an passiviertem Mg verringert und die stromlose Auflösung der Passivierungsschicht beschleunigt. Dies hat einen positiven Effekt, da wir das effizienteste Zyklieren und die gleichmäßigste Abscheidung beobachten, wenn sich keine Interphase auf der Elektrode befindet.
- Open Access
- 19 November 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 63 (52) , e202413058
Influence of Chloride and Electrolyte Stability on Passivation Layer Evolution at the Negative Electrode of Mg Batteries Revealed by operando EQCM‐D
Rechargeable magnesium batteries are promising for future energy storage. However, among other challenges, their practical application is hindered by low coulombic efficiencies of magnesium plating and stripping. Fundamental processes such as the formation, structure, and stability of passivation layers and the influence of different electrolyte components on them are still not fully understood. In this work, we gain unique insights into the initial Mg plating and stripping cycles by comparing magnesium bis(trifluoromethanesulfonyl)imide (Mg(TFSI) 2 )‐ and magnesium tetrakis(hexafluoroisopropyloxy)borate (Mg[B(hfip) 4 ] 2 )‐based electrolytes, each with and without MgCl 2 , on gold electrodes by highly sensitive operando electrochemical quartz crystal microbalance with dissipation monitoring (EQCM−D) applying hydrodynamic spectroscopy. With the stable Mg[B(hfip) 4 ] 2 ‐based electrolytes, highly efficient and interphase‐free cycling is possible and passivation layers are attributed to electrolyte contaminants. These are forming and degrading during the so‐called initial conditioning process. With the more reactive Mg(TFSI) 2 ‐based electrolyte, thick passivation layers with small pores are growing during cycling. We demonstrate that the addition of chloride lowers the amount of passivated Mg deposits in these electrolytes and accelerates the currentless dissolution of the passivation layer. This has a positive effect since we observe the most efficient cycling and uniform deposition when no interphase is present on the electrode.
- 19 November 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 63 (52) , e202413058
Open AccessInfluence of Chloride and Electrolyte Stability on Passivation Layer Evolution at the Negative Electrode of Mg Batteries Revealed by operando EQCM‐D
Rechargeable magnesium batteries are promising for future energy storage. However, among other challenges, their practical application is hindered by low coulombic efficiencies of magnesium plating and stripping. Fundamental processes such as the formation, structure, and stability of passivation layers and the influence of different electrolyte components on them are still not fully understood. In this work, we gain unique insights into the initial Mg plating and stripping cycles by comparing magnesium bis(trifluoromethanesulfonyl)imide (Mg(TFSI) 2 )‐ and magnesium tetrakis(hexafluoroisopropyloxy)borate (Mg[B(hfip) 4 ] 2 )‐based electrolytes, each with and without MgCl 2 , on gold electrodes by highly sensitive operando electrochemical quartz crystal microbalance with dissipation monitoring (EQCM−D) applying hydrodynamic spectroscopy. With the stable Mg[B(hfip) 4 ] 2 ‐based electrolytes, highly efficient and interphase‐free cycling is possible and passivation layers are attributed to electrolyte contaminants. These are forming and degrading during the so‐called initial conditioning process. With the more reactive Mg(TFSI) 2 ‐based electrolyte, thick passivation layers with small pores are growing during cycling. We demonstrate that the addition of chloride lowers the amount of passivated Mg deposits in these electrolytes and accelerates the currentless dissolution of the passivation layer. This has a positive effect since we observe the most efficient cycling and uniform deposition when no interphase is present on the electrode.
- Open Access
- 22 November 2023
- Published by Wiley in ChemSusChem
- Vol. 17 (4) , e202301269
Revealing the Structural Evolution of Electrode/Electrolyte Interphase Formation during Magnesium Plating and Stripping with operando EQCM‐D
Rechargeable magnesium batteries could provide future energy storage systems with high energy density. One remaining challenge is the development of electrolytes compatible with the negative Mg electrode, enabling uniform plating and stripping with high Coulombic efficiencies. Often improvements are hindered by a lack of fundamental understanding of processes occurring during cycling, as well as the existence and structure of a formed interphase layer at the electrode/electrolyte interface. Here, a magnesium model electrolyte based on magnesium bis(trifluoromethanesulfonyl)imide (Mg(TFSI)2) and MgCl2 with a borohydride as additive, dissolved in dimethoxyethane (DME), was used to investigate the initial galvanostatic plating and stripping cycles operando using electrochemical quartz crystal microbalance with dissipation monitoring (EQCM‐D). We show that side reactions lead to the formation of an interphase of irreversibly deposited Mg during the initial cycles. EQCM‐D based hydrodynamic spectroscopy reveals the growth of a porous layer during Mg stripping. After the first cycles, the interphase layer is in a dynamic equilibrium between the formation of the layer and its dissolution, resulting in a stable thickness upon further cycling. This study provides operando information of the interphase formation, its changes during cycling and the dynamic behavior, helping to rationally develop future electrolytes and electrode/electrolyte interfaces and interphases.
- 22 November 2023
- Published by Wiley in ChemSusChem
- Vol. 17 (4) , e202301269
Open AccessRevealing the Structural Evolution of Electrode/Electrolyte Interphase Formation during Magnesium Plating and Stripping with operando EQCM‐D
Rechargeable magnesium batteries could provide future energy storage systems with high energy density. One remaining challenge is the development of electrolytes compatible with the negative Mg electrode, enabling uniform plating and stripping with high Coulombic efficiencies. Often improvements are hindered by a lack of fundamental understanding of processes occurring during cycling, as well as the existence and structure of a formed interphase layer at the electrode/electrolyte interface. Here, a magnesium model electrolyte based on magnesium bis(trifluoromethanesulfonyl)imide (Mg(TFSI)2) and MgCl2 with a borohydride as additive, dissolved in dimethoxyethane (DME), was used to investigate the initial galvanostatic plating and stripping cycles operando using electrochemical quartz crystal microbalance with dissipation monitoring (EQCM‐D). We show that side reactions lead to the formation of an interphase of irreversibly deposited Mg during the initial cycles. EQCM‐D based hydrodynamic spectroscopy reveals the growth of a porous layer during Mg stripping. After the first cycles, the interphase layer is in a dynamic equilibrium between the formation of the layer and its dissolution, resulting in a stable thickness upon further cycling. This study provides operando information of the interphase formation, its changes during cycling and the dynamic behavior, helping to rationally develop future electrolytes and electrode/electrolyte interfaces and interphases.
- Open Access
- 7 December 2022
- Published by Wiley in Angewandte Chemie
- Vol. 135 (2)
Kombination von Deep Eutectic Solvents mit TEMPO‐basierten Polymerelektroden: Einfluss des Molaren Verhältnisses auf das Elektrodenverhalten**
Vollorganische Batterien auf Grundlage redoxaktiver Polymere versprechen eine Alternative zu Lithium‐Ionen‐Batterien für die nachhaltige Energiespeicherung zu werden. Polymere tragen bisher als Elektroden oder als feste Elektrolyte zum Ziel einer rein organischen Zelle bei. Hier ersetzen wir den Elektrolyten durch ein Deep Eutectic Solvent (DES), das aus Natriumbis(trifluormethansulfonyl)imid (NaTFSI) und N‐Methylacetamid (NMA) besteht, und verwenden Poly(2,2,6,6‐tetramethylpiperidin‐1‐yl‐oxylmethacrylat) (PTMA) als Kathode. Von der erfolgreichen Kombination eines DES mit einer Polymerelektrode wird hier zum ersten Mal berichtet. Die elektrochemische Stabilität von PTMA‐Elektroden im DES ist beim eutektischen Stoffmengenverhältnis von 1 : 6 mit herkömmlichen Batterieelektrolyten vergleichbar. Viskosere Elektrolyte mit höherer Salzkonzentration können das Zykeln bei hohen Raten behindern. Eine niedrigere Salzkonzentration führt zu sinkenden Kapazitäten und schnellerer Zersetzung. Die eutektische Mischung von 1 : 6 ist am besten geeignet, um hohe Stabilität und moderate Viskosität zu vereinen.
- 7 December 2022
- Published by Wiley in Angewandte Chemie
- Vol. 135 (2)
Open AccessKombination von Deep Eutectic Solvents mit TEMPO‐basierten Polymerelektroden: Einfluss des Molaren Verhältnisses auf das Elektrodenverhalten**
Vollorganische Batterien auf Grundlage redoxaktiver Polymere versprechen eine Alternative zu Lithium‐Ionen‐Batterien für die nachhaltige Energiespeicherung zu werden. Polymere tragen bisher als Elektroden oder als feste Elektrolyte zum Ziel einer rein organischen Zelle bei. Hier ersetzen wir den Elektrolyten durch ein Deep Eutectic Solvent (DES), das aus Natriumbis(trifluormethansulfonyl)imid (NaTFSI) und N‐Methylacetamid (NMA) besteht, und verwenden Poly(2,2,6,6‐tetramethylpiperidin‐1‐yl‐oxylmethacrylat) (PTMA) als Kathode. Von der erfolgreichen Kombination eines DES mit einer Polymerelektrode wird hier zum ersten Mal berichtet. Die elektrochemische Stabilität von PTMA‐Elektroden im DES ist beim eutektischen Stoffmengenverhältnis von 1 : 6 mit herkömmlichen Batterieelektrolyten vergleichbar. Viskosere Elektrolyte mit höherer Salzkonzentration können das Zykeln bei hohen Raten behindern. Eine niedrigere Salzkonzentration führt zu sinkenden Kapazitäten und schnellerer Zersetzung. Die eutektische Mischung von 1 : 6 ist am besten geeignet, um hohe Stabilität und moderate Viskosität zu vereinen.
- Open Access
- 7 December 2022
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 62 (2)
Combining Deep Eutectic Solvents with TEMPO‐based Polymer Electrodes: Influence of Molar Ratio on Electrode Performance**
For sustainable energy storage, all‐organic batteries based on redox‐active polymers promise to become an alternative to lithium ion batteries. Yet, polymers contribute to the goal of an all‐organic cell as electrodes or as solid electrolytes. Here, we replace the electrolyte with a deep eutectic solvent (DES) composed of sodium bis(trifluoromethanesulfonyl)imide (NaTFSI) and N‐methylacetamide (NMA), while using poly(2,2,6,6‐tetramethylpiperidin‐1‐yl‐oxyl methacrylate) (PTMA) as cathode. The successful combination of a DES with a polymer electrode is reported here for the first time. The electrochemical stability of PTMA electrodes in the DES at the eutectic molar ratio of 1 : 6 is comparable to conventional battery electrolytes. More viscous electrolytes with higher salt concentration can hinder cycling at high rates. Lower salt concentration leads to decreasing capacities and faster decomposition. The eutectic mixture of 1 : 6 is best suited uniting high stability and moderate viscosity.
- 7 December 2022
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 62 (2)
Open AccessCombining Deep Eutectic Solvents with TEMPO‐based Polymer Electrodes: Influence of Molar Ratio on Electrode Performance**
For sustainable energy storage, all‐organic batteries based on redox‐active polymers promise to become an alternative to lithium ion batteries. Yet, polymers contribute to the goal of an all‐organic cell as electrodes or as solid electrolytes. Here, we replace the electrolyte with a deep eutectic solvent (DES) composed of sodium bis(trifluoromethanesulfonyl)imide (NaTFSI) and N‐methylacetamide (NMA), while using poly(2,2,6,6‐tetramethylpiperidin‐1‐yl‐oxyl methacrylate) (PTMA) as cathode. The successful combination of a DES with a polymer electrode is reported here for the first time. The electrochemical stability of PTMA electrodes in the DES at the eutectic molar ratio of 1 : 6 is comparable to conventional battery electrolytes. More viscous electrolytes with higher salt concentration can hinder cycling at high rates. Lower salt concentration leads to decreasing capacities and faster decomposition. The eutectic mixture of 1 : 6 is best suited uniting high stability and moderate viscosity.