PYPan Yan

Pan Yan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pan Yan has a total of 58 co-authors. Here are the top co-authors by number of shared publications:

  • Zhiyong Xiao

    Planetary Environmental and Astrobiological Research Laboratory School of Atmospheric Sciences, Sun Yat‐Sen University Zhuhai China

    9 shared publications
  • Yunhua Wu

    Planetary Environmental and Astrobiological Research Laboratory, School of Atmospheric Sciences, Sun Yat-sen University, Zhuhai 519082, China

    8 shared publications
  • Qing Pan

    Planetary Environmental and Astrobiological Research Laboratory School of Atmospheric Sciences Sun Yat‐sen University Zhuhai China

    5 shared publications
  • Yanxue Wu

    Analysis and Test Center Guangdong University of Technology Guangzhou China

    5 shared publications
  • Hejiu Hui

    State Key Laboratory of Critical Earth Material Cycling and Mineral Deposits & Lunar and Planetary Science Institute, School of Earth Sciences and Engineering, Nanjing University , Nanjing 210023

    2 shared publications
  • L. Pan

    School of Earth Sciences and Engineering Sun Yat‐sen University Zhuhai China

    2 shared publications

Latest Publications

  • Open Access

    Surface Roughness of the Chang’E-5 and Chang’E-6 Lunar Samples: Implications for the Microscopic Processes Shaping the Lunar Surface

    by Jun Du, Jianxin Tian, Yang Liu, Pan Yan, Chenxiang Li, Yazhou Yang, Minge Liu, Huimin Shao, Liying Huang, Mengyuan Zhang, et al.

    Although lunar surface roughness was studied extensively above micrometers before, it has not been investigated at smaller scales. In this study, we measured the surface topography of the Chang’E-5 and Chang’E-6 lunar samples by using atomic force microscopy. The obtained elevation datasets have a resolution of 117 nm pix –1 , and their power spectral densities were calculated to evaluate the surface roughness. The resulting topographic power decreases with increasing wavevector, indicating the surface becomes smoother at smaller scales. Depending on the distribution of strength weakness and impact condition, fragmentation processes can produce surfaces with various roughness, whereas melt cooling can produce smooth, curved surfaces. Surface roughness does not vary significantly among different crystalline minerals, but is systematically lower for glasses. Self-similarity of the sample surfaces was then examined by the Hurst exponent of topographic powers. Flat surfaces show the least self-similar pattern due to their smooth texture, whereas surfaces with rectangular features are the most self-similar linked to their highly ordered weakness planes. Notably, lunar grains can exhibit Hurst exponents greater than 1, which indicates a strength-dominated fragmentation regime rarely seen on larger-scale lunar surfaces. In the visible wavelengths, the single-scattering albedo decreases and the depolarization effect increases from spherical to prolate and rough grains. In the thermal infrared wavelengths, the absorption band depths of the selected samples may vary by 6%–21% due to different surface roughness. This study offers new insights into the microscopic processes shaping the Moon and contributes to a more accurate interpretation of lunar remote sensing data.

  • Microstructures on Surfaces of Impact Glass Beads in Chang'e‐6 Regolith

    by Pan Yan, Zhi Cao, Zhiyong Xiao, Yanxue Wu, Yunhua Wu, Mingchao Xiong, Zilei Chen, Lifeng Zhong, Dengfeng Li, Qiaofen Liu

    Microstructures are widespread on the surfaces of impact glasses in lunar regolith, recording intricate physical and chemical processes of regolith gardening. The Chang'e‐6 mission returned the first regolith sample from the lunar farside, permitting investigation of regolith gardening on the farside and comparison with that on the nearside. Among over 400 glass particles handpicked from 1,500 mg of Chang'e‐6 regolith, we investigated 178 impact glass beads, which were recognized based on their morphology, internal structure and geochemistry. The morphology and chemical compositions of microstructures on their surfaces are cataloged and compared with those reported on surfaces of lunar nearside samples, especially Chang'e‐5 impact glasses. The various types of microstructures on surfaces of Chang'e‐5 impact glasses are also observed on Chang'e‐6 impact glasses, although the latter frequently exhibit a greater diversity of morphology and composition. The observations suggest that physical processes of regolith gardening are similar on the nearside and farside, which involve vapor, melt and/or solid phases, and with collision speeds much lower than those of extralunar impactors. On the other hand, there are other morphological types of microstructures on the surfaces of Chang'e‐6 impact glass beads that were absent or rare on Chang'e‐5 glasses, but they were reported on Apollo and Luna impact glasses. Their origin may be related to the older emplacement ages and/or more abundant exotic components in the protolith of Chang'e‐6 regolith than that of Chang'e‐5 regolith. During regolith gardening, chemical alterations of protoliths are nonuniform across the Moon, which are related to the contents of exotic components in the regolith.


  • Early Partial Melting and Formation of Na‐Rich Asteroidal Crust Revealed by the Albite‐Rich Achondrite Erg Atouila 001

    by Y. Wu, X. Che, L. Pan, P. Yan, Z. Xiao

    Elucidating the extent of early magmatic diversity on asteroids is crucial for understanding the planetary formation processes. While our knowledge of early asteroidal differentiation is predominantly based on basaltic components due to the relatively large number of basaltic achondrites discovered, the recent identification of high‐Si achondrites offers a new opportunity to investigate the origin and evolution of felsic magmas on asteroids. In this study, we conducted detailed petrological, mineralogical, and in situ phosphate chronological analyses on Erg Atouila (EA) 001, an ungrouped achondrite recognized for its high SiO2 and alkali contents. Our findings suggest that EA 001 could derive from low degree partial melting of an oxidized parent body, involving extensive segregation of Fe–Ni‐S melts and potential degassing of volatiles. Impact heating may play an important role in the thermal evolution of its parent body. Geochemical modeling of rare earth element concentrations indicates that EA 001 could have originated from <15% fractional melting of chondritic precursors (e.g., Acapulco‐like, Lewis Cliff 88763‐like), with apatite playing a crucial role. Although the oxygen isotopic composition of EA 001 is similar to that of the acapulcoites‐lodranites clan and some FeO‐rich achondrites, other petrological and geochemical features suggest formation from different source materials. The diversity among high‐Si achondrites implies that partial melts of feldspar‐rich components are more common than previously thought on asteroids and are important constituents of crustal components. This process likely occurred on various asteroidal parent bodies with different initial compositions, oxidation conditions, degassing scenarios, and differentiation extents.


  • Adhesion of Silicate Impact Melts on Impact Glasses of Chang'e‐5 Regolith

    by Pan Yan, Zhiyong Xiao, Yanxue Wu, Yunhua Wu, Mingchao Xiong, Qing Pan

    Microscopic silicate melts are ubiquitous on surfaces of lunar regolith particles, and they record physicochemical processes of regolith reworking on the Moon. Similar microstructures are visible on surfaces of the Chang'e‐5 lunar impact glass particles, which are predominantly sourced from local mare deposits. Therefore, the microscopic silicate melts provide an invaluable opportunity to study the movements, provenances, and chemical alterations of substances involved in regolith reworking. However, the small lateral sizes and thicknesses of the surface silicate melts are a challenge for quantifying their internal structures and geochemical compositions, hampering interpretations of their origin. Here we report structural and geochemical characteristics for microscopic silicate pancakes, domes and foams on surfaces of Chang'e‐5 impact glass particles. Based on the contact and compositional differences between the surface microscopic silicate melts and their host glass, we reveal that these microstructures are consistent with being formed during impact bombardment in regolith via adhesion of impact melts to earlier‐existing glasses. Most of the microscopic silicate melts have minor compositional differences with the host glass. Our mixing calculations for compositions of impact melt formed from various proportions of local regolith minerals at the landing site reveal a dominant precursor from the local mare deposits. Few portions of the microscopic silicate melts have exotic compositions that are different from the local regolith materials, confirming that ejecta from the other geochemical terrains is minor at the landing site. Our results show that regolith formation and reworking at the Chang'e‐5 sampling site mainly involved local mare deposits.


  • Hydrothermal Fluid Activity on Mars Recorded in Phosphates of the Gabbroic Shergottite Northwest Africa 13581

    by Y. Wu, Z. Xiao, L. Pan, P. Yan, S. Liao, Q. Pan, S. Li, Y. Li, W. Hsu

    Apatites record crucial information on the origin, composition, and chemical evolution of volatiles on terrestrial planets. As a martian intrusive rock, the gabbroic shergottite Northwest Africa (NWA) 13581 provides key information on the volatile evolution related to magmatic processes in the interior, shedding light on the intricate volatile circulation on Mars. The textural and chemical characteristics of the phosphates in NWA 13581 indicate a complex formation history involving fractional crystallization, degassing, and fluid interaction. Degassing of the NWA 13581 parent melt is capable of exsolving chlorine‐rich fluids, resulting in the formation of notably fluorine‐rich apatite with a high x‐site occupancy of fluorine up to 90%. The degassed/exsolved volatile‐rich fluids could subsequently continue to migrate and interact with surrounding magmatic suites, leading to highly heterogeneous compositions of active fluids. The crystallization of apatite is initiated by the interaction of fluids with merrillite at the late stage of the magmatic process, leading to the formation of phosphate intergrowths. Influenced by the composition and chemical evolution of volatiles in fluids and melts, apatite exhibits notable variability in chlorine compositions both within individual grains and among different grains. Moreover, the presence of magnetite associated with phosphate intergrowth highlights the transportation of metallic components in addition to volatiles from deep layers to shallower depths or to the surface of Mars. This process, which is observed in young shergottites, indicates the persistent presence of hydrothermal systems until recent geological periods, contributing to the generation and circulation of volatiles within the martian interior and on the surface.


  • Iron‐Rich Grain‐Decorated Depressions on Surfaces of Lunar Impact Glasses

    by Pan Yan, Zhiyong Xiao, Yanxue Wu, Qing Pan, Yunhua Wu

    Iron‐rich particles are widespread on the surfaces and interiors of lunar impact glasses, and they record delicate physicochemical processes during space weathering and regolith gardening on the Moon. Different from nanophase iron in amorphous rims of regolith minerals, iron‐rich particles in lunar impact glasses are mostly larger than 10 nm and are spherical and semi‐hemispherical in shape. In regolith samples returned by Luna, Apollo and Chang'E‐5 missions, a special form of microscopic iron‐rich structure commonly exists on surfaces of impact glasses, which appear as rimless depressions that are filled with nano‐sized grains. Termed grain‐decorated iron‐rich depressions, their possible origin is elusive. Here we perform detailed observations of the morphology, composition and crystallography of these microstructures, showing that they are not degassing pits that were later filled with nano‐sized grains as has been previously considered. They are hemispherical integrated compounds of α‐Fe and troilite that have variable area proportion. The surface grains are dominated by α‐Fe, which mainly develop on top of vesiculated surfaces of the underlying troilite. The α‐Fe grains are mainly formed by desulphurization of troilite due to radiation and heating. While iron‐rich grain‐decorated depressions have larger diameters and different surface morphologies compared to other iron‐rich microstructures in lunar impact glasses, their identical occurrences and phase components (α‐Fe and troilite) suggest a common origin caused by liquid immiscibility between Fe‐S melt and silicate melt. Their diverse surface morphology is mainly caused by heterogeneous S contents and local ratios of Fe and S in silicate impact melt.


  • Impact-related chemical modifications of the Chang’E-5 lunar regolith

    by Yunhua Wu, Shiyong Liao, Pan Yan, Zhiyong Xiao, Zongjun Yin, Wei Yang, Hao Wang, Hengci Tian, Hejiu Hui, Lili Pan, et al.


  • Open Access

    Magnetite in Muong Nong‐Type Australasian Tektites From South China

    by Qing Pan, Zhiyong Xiao, Yanxue Wu, Yunhua Wu, Pan Yan

    South China belongs to the northern geographic branch of the Australasian strewn field (AASF) of tektites and microtektites, and this area is assumed to be part of the uprange region of the putative impactor trajectory that formed the yet undiscovered source crater. Ferromagnetic minerals in impact glass may record the magnetization process and thermal history of impact melt, but the possible identity of ferromagnetic minerals in AASF tektites from South China is elusive. Here, we perform a rock magnetism and crystallography study of iron‐sulfur spherules in Muong Nong‐type tektites from South China, revealing abundant single‐domain and pseudo single‐domain nano‐grains of magnetite within the spherules. This result is consistent with the detection of magnetic signals caused by single‐domain and pseudo single‐domain magnetite in these samples. Compared to the large value ranges of magnetic properties of tektites in the entire strewn field, individual specimens of both Muong Nong‐type and single splash‐form tektites have relatively homogeneous magnetic properties in terms of magnetic susceptibility, natural remanent magnetization (NRM), saturation isothermal remanent magnetization (SIRM) and NRM/SIRM ratio. The results indicate that the impact melt that formed each tektite specimen experienced similar thermal history, and most AASF tektites from South China were cooled in an ambient magnetic field that is the same order of magnitude as the Earth's magnetic field.


  • Magnetic Properties of Australasian Tektites From South China

    by Qing Pan, Zhiyong Xiao, Yunhua Wu, Taiheng Shi, Zongjun Yin, Pan Yan, Ye Li

    South China, the northern part of the Australasian strewn field (AASF) of tektites and microtektites is located at the uprange of the hypothesized source crater that is still unconfirmed. Magnetic properties of impact glasses are an important indicator of their source materials and thermal history. Extensive magnetic investigations have been performed on various AASF tektites sampled from both the Indochina Peninsula and further south, but such information remains sparse for those sampled from South China. Here, we present a detailed rock magnetism study for both Muong Nong‐type and splash‐form AASF tektites from South China, showing that all the tektites have rather weak remanent magnetization, but ferromagnetic information can be extracted from their dominating paramagnetic signal. Signals caused by superparamagnetic particles are elusive, but those of single domain magnetite are detected in the splash‐form tektites, and signals of pseudo‐single domain magnetite are discovered in the Muong Nong‐type tektites. Each morphological type of tektites from a same geographic area exhibits large dispersions in their magnetic properties. Across the entire AASF, the Muong Nong‐type tektites from South China exhibit the lowest average magnetic susceptibility, and the splash‐form tektites exhibit the smallest average natural remanent magnetization and ratio of equivalent magnetization. The observed heterogeneous magnetic properties are mainly caused by the different contents and sizes of magnetic particles, which can be explained by the different shock level and/or cooling history of the tektite melts. Micro‐sized immiscible Fe‐S spherules in the Muong Nong‐type tektites from South China were likely originated from the pre‐impact target.


  • Intricate Regolith Reworking Processes Revealed by Microstructures on Lunar Impact Glasses

    by Pan Yan, Zhiyong Xiao, Yunhua Wu, Wei Yang, Jin‐Hua Li, Li‐Xin Gu, Shiyong Liao, Zongjun Yin, Hao Wang, Heng‐Ci Tian, et al.

    Glasses cooled from impact melt and vapor are a common component in lunar regolith, carrying important information about protolith composition, regolith formation, and impact flux on the Moon. Interpretations, however, are frequently challenged due to widespread ambiguity in determining their provenances. Regolith samples returned by China's Chang’E‐5 mission provide a unique opportunity to study the microscopic mechanism of regolith reworking on the Moon, because as evidenced by the coherent radioisotope ages and petrographic characteristics of basaltic clasts in the regolith, the Chang’E‐5 regolith was mainly evolved from local mare materials, containing minor exotic components. Here, we report 153 glass particles larger than 20 μm in diameters that were screened from 500 mg of Chang’E‐5 regolith. Most glass particles have rotational shapes and contain structural and/or compositional heterogeneities in interiors, and geochemical analyses reveal a dominant origin as impact melt of local mare materials. Surfaces of the impact glasses are observed to have abundant protruded and dented microstructures, which are classified as different groups based on their morphology and geochemistry. Similar microstructures were observed on impact spherules collected by the Apollo and Luna missions, but those on the Chang’E‐5 impact glasses were formed without substantial involvement of exotic ejecta. Microstructures such as silicate melt pancakes that frequently exhibit flow spikes at margins, nano‐phase iron‐rich mounds that are arranged with semi‐equidistant spaces in curves and patches, spatially clustered microcraters that are indicative of secondary impacts, and blunt linear scratches with terminal particles all suggest that regolith reworking mainly occurred among local materials at low speeds.