Kai Zuo
Research Subjects
Kai Zuo has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Baolong Li
CNOOC Ener Tech-Drilling & Production Co., Tianjin 300452, China
2 shared publications - Binggang Wang
Key Laboratory for Offshore Completion, CNOOC Energy Technology & Services Limited, Tianjin 300452, China
2 shared publications - Haitao Qi
Key Laboratory for Offshore Completion, CNOOC Energy Technology & Services Limited, Tianjin 300452, China
2 shared publications - Mingxuan Zhang
Department of Offshore Oil and Gas Engineering, School of Petroleum Engineering, China University of Petroleum (Beijing), Beijing 102249, China
2 shared publications - Yi Hong
CNOOC (China) Limited Zhanjiang Branch, Zhanjiang 524057, China
2 shared publications - Cheng Wang
Engineering Technology Branch, CNOOC Energy Development Co., Ltd., Tianjin 300450, China
1 shared publication
Latest Publications
- Open Access
Gravel-Bed Evolution and Flow-Field Feedback Mechanisms in a Horizontal Concentric Annulus
Gravel transport and deposition strongly influence packing integrity in horizontal-well gravel packing. A three-dimensional two-way coupled CFD–DEM model was developed to investigate particle-bed evolution and flow-field feedback in a horizontal concentric annulus. For the particle-size comparisons, the generation rate was fixed at 6.0 × 105 particles/s, resulting in nearly tenfold higher solid mass and volume input rates for the 1.72 mm case than for the 0.80 mm case. Particle-bed development was characterized by axial spreading and vertical accumulation. Increasing the inlet velocity from 0.5 to 1.5 and 5.0 m/s increased the normalized bed-front position from 0.249 to 0.654 and 0.983, respectively, indicating enhanced axial bed spreading at higher velocities. Across the particle-size cases, late-stage bed-front positions were comparable, whereas mean normalized projected bed heights differed, reflecting the combined influence of particle size and solid loading. Bed formation reduced the effective flow passage and redistributed the local velocity and pressure fields, supporting a coupled feedback pathway among particle transport, bed development, and flow-field response. Field-case observations of pumping-rate regulation and pressure response provided a qualitative physical analogy to the flow-field trends observed in the simulations. These findings provide a physical basis for understanding particle-bed evolution and flow-field feedback during horizontal-well gravel packing.
Open AccessGravel-Bed Evolution and Flow-Field Feedback Mechanisms in a Horizontal Concentric Annulus
Gravel transport and deposition strongly influence packing integrity in horizontal-well gravel packing. A three-dimensional two-way coupled CFD–DEM model was developed to investigate particle-bed evolution and flow-field feedback in a horizontal concentric annulus. For the particle-size comparisons, the generation rate was fixed at 6.0 × 105 particles/s, resulting in nearly tenfold higher solid mass and volume input rates for the 1.72 mm case than for the 0.80 mm case. Particle-bed development was characterized by axial spreading and vertical accumulation. Increasing the inlet velocity from 0.5 to 1.5 and 5.0 m/s increased the normalized bed-front position from 0.249 to 0.654 and 0.983, respectively, indicating enhanced axial bed spreading at higher velocities. Across the particle-size cases, late-stage bed-front positions were comparable, whereas mean normalized projected bed heights differed, reflecting the combined influence of particle size and solid loading. Bed formation reduced the effective flow passage and redistributed the local velocity and pressure fields, supporting a coupled feedback pathway among particle transport, bed development, and flow-field response. Field-case observations of pumping-rate regulation and pressure response provided a qualitative physical analogy to the flow-field trends observed in the simulations. These findings provide a physical basis for understanding particle-bed evolution and flow-field feedback during horizontal-well gravel packing.
- Open Access
Erosion Behavior and Prediction Model of Intelligent Filling Tools Under Flow-Path Switching Conditions
Flow-path switching is a key operating condition that enables flow regulation, zonal conversion, and filling-path redirection in sand-control completions. The associated flow characteristics directly govern the operational stability and service reliability of intelligent filling tools. Most existing studies have addressed erosion only under simple geometries such as pipe contractions and expansions, leaving the dominant erosion-controlling factors and rapid erosion-rate prediction methods for sand-control filling tools under flow-path switching conditions insufficiently understood. This study developed a Fluent-based numerical model of solid–liquid two-phase erosion for intelligent filling tools and characterizes the wall-erosion distribution pattern during flow-path switching. Guided by field practice, multi-factor simulations were performed over the reduction angle, cutting particle size, inlet flow capacity, flow-switching direction, opening area, and structural form. On this basis, a maximum-erosion-rate prediction model was constructed using a logarithmic transformation combined with a stepwise quadratic response-surface method. This regression-based approach was deliberately chosen over machine-learning black-box models, whose limited interpretability and small-sample reliability make it difficult to reveal the underlying physical mechanisms; in contrast, the proposed model yields an explicit algebraic expression whose significant interaction and quadratic terms directly reflect the coupling between structural and operating parameters, while the logarithmic transformation accommodates erosion-rate fluctuations spanning several orders of magnitude. The results show that the factors rank in influence as follows: flow-switching direction > opening area > reduction angle > inlet flow capacity > cutting particle size > structural form. The established prediction model attained a coefficient of determination of about 0.951 and an adjusted coefficient of determination of about 0.901; combined with the significance test and a residual analysis, the model can effectively characterize the coupling influence of structural parameters and operating parameters on the erosion rate. These findings provide quantitative guidance for the erosion-resistant structural design, field operating-parameter selection, and preliminary service-life assessment of intelligent filling tools in offshore sand-control well-completion operations. The prediction model is further validated through jetting-erosion bench tests; the measured erosion rates agree closely with the model-predicted values, confirming the practical reliability of the model and its capability to serve as an engineering reference for the erosion-resistant design and service-life assessment of intelligent filling tools in sand-control well-completion operations.
Open AccessErosion Behavior and Prediction Model of Intelligent Filling Tools Under Flow-Path Switching Conditions
Flow-path switching is a key operating condition that enables flow regulation, zonal conversion, and filling-path redirection in sand-control completions. The associated flow characteristics directly govern the operational stability and service reliability of intelligent filling tools. Most existing studies have addressed erosion only under simple geometries such as pipe contractions and expansions, leaving the dominant erosion-controlling factors and rapid erosion-rate prediction methods for sand-control filling tools under flow-path switching conditions insufficiently understood. This study developed a Fluent-based numerical model of solid–liquid two-phase erosion for intelligent filling tools and characterizes the wall-erosion distribution pattern during flow-path switching. Guided by field practice, multi-factor simulations were performed over the reduction angle, cutting particle size, inlet flow capacity, flow-switching direction, opening area, and structural form. On this basis, a maximum-erosion-rate prediction model was constructed using a logarithmic transformation combined with a stepwise quadratic response-surface method. This regression-based approach was deliberately chosen over machine-learning black-box models, whose limited interpretability and small-sample reliability make it difficult to reveal the underlying physical mechanisms; in contrast, the proposed model yields an explicit algebraic expression whose significant interaction and quadratic terms directly reflect the coupling between structural and operating parameters, while the logarithmic transformation accommodates erosion-rate fluctuations spanning several orders of magnitude. The results show that the factors rank in influence as follows: flow-switching direction > opening area > reduction angle > inlet flow capacity > cutting particle size > structural form. The established prediction model attained a coefficient of determination of about 0.951 and an adjusted coefficient of determination of about 0.901; combined with the significance test and a residual analysis, the model can effectively characterize the coupling influence of structural parameters and operating parameters on the erosion rate. These findings provide quantitative guidance for the erosion-resistant structural design, field operating-parameter selection, and preliminary service-life assessment of intelligent filling tools in offshore sand-control well-completion operations. The prediction model is further validated through jetting-erosion bench tests; the measured erosion rates agree closely with the model-predicted values, confirming the practical reliability of the model and its capability to serve as an engineering reference for the erosion-resistant design and service-life assessment of intelligent filling tools in sand-control well-completion operations.
- Open Access
Production Parameter Optimization for Complex-Structured Wells Considering Net Present Value
Offshore reservoirs are commonly characterized by complex geology, constrained operations, and high per-well investment. Improving economic performance while maintaining deliverability is therefore a pressing need during field development. By combining multilateral wellbores with staged hydraulic fracturing, complex-structured wells can markedly enhance well–reservoir connectivity; however, for fishbone-type complex-structured wells, published studies still provide limited case-based discussion on how branch-junction loss, completion staging, fracture parameters, and the economic metric jointly affect the final design outcome. In this study, a semi-analytical productivity model for complex-structured fractured wells is developed, accounting for a multi-scale coupling among the reservoir, fractures, and the wellbore. The wellbore and fractures are discretized to quantify the contribution of each completion stage and fracture element to overall productivity. An economic metric with net present value (NPV) as the objective function is then introduced, and a genetic-algorithm-based joint optimization method is established for completion staging parameters and fracture-geometry parameters, enabling an automatic search for the key design variables. The model is validated against water–electric analogy experiments and a field case, demonstrating good predictive accuracy. Case studies show that, with a reasonable parameter configuration, complex-structured fractured wells can significantly increase the cumulative oil production and the NPV under a limited increase in cost; the optimized NPV is improved by approximately 20.2%, illustrating the potential interaction among completion staging, fracture parameters, and the NPV metric under the studied reservoir and economic conditions.
Open AccessProduction Parameter Optimization for Complex-Structured Wells Considering Net Present Value
Offshore reservoirs are commonly characterized by complex geology, constrained operations, and high per-well investment. Improving economic performance while maintaining deliverability is therefore a pressing need during field development. By combining multilateral wellbores with staged hydraulic fracturing, complex-structured wells can markedly enhance well–reservoir connectivity; however, for fishbone-type complex-structured wells, published studies still provide limited case-based discussion on how branch-junction loss, completion staging, fracture parameters, and the economic metric jointly affect the final design outcome. In this study, a semi-analytical productivity model for complex-structured fractured wells is developed, accounting for a multi-scale coupling among the reservoir, fractures, and the wellbore. The wellbore and fractures are discretized to quantify the contribution of each completion stage and fracture element to overall productivity. An economic metric with net present value (NPV) as the objective function is then introduced, and a genetic-algorithm-based joint optimization method is established for completion staging parameters and fracture-geometry parameters, enabling an automatic search for the key design variables. The model is validated against water–electric analogy experiments and a field case, demonstrating good predictive accuracy. Case studies show that, with a reasonable parameter configuration, complex-structured fractured wells can significantly increase the cumulative oil production and the NPV under a limited increase in cost; the optimized NPV is improved by approximately 20.2%, illustrating the potential interaction among completion staging, fracture parameters, and the NPV metric under the studied reservoir and economic conditions.
- Open Access
Thrust Coordinated Assignment and Ripple Suppression of a Multiple-Modular Permanent Magnet Linear Synchronous Motor Based on Model Predictive Thrust Control
This paper presents a model predictive thrust force control (MPTFC) method for a multiple-modular permanent magnet synchronous linear motor (PMSLM). It focuses on the thrust assignment and thrust ripple of the motor drive system with a multiple-branch inverter. A discrete time model of the PMSLM is established, and the driving system structure and operation principle of the motor are studied. A multi-mode cost function is designed according to the requirements of the different load conditions, and the optimal voltage vector action time is determined. The operation mode is analyzed to determine the distribution factor, so as to reduce the thrust pulsation during operation and improve the performance of the drive system. The results indicate that the proposed MPTFC method is effective in different operating modes, and the drive system has high efficiency and safer performance compared to a conventional drive system.
Open AccessThrust Coordinated Assignment and Ripple Suppression of a Multiple-Modular Permanent Magnet Linear Synchronous Motor Based on Model Predictive Thrust Control
This paper presents a model predictive thrust force control (MPTFC) method for a multiple-modular permanent magnet synchronous linear motor (PMSLM). It focuses on the thrust assignment and thrust ripple of the motor drive system with a multiple-branch inverter. A discrete time model of the PMSLM is established, and the driving system structure and operation principle of the motor are studied. A multi-mode cost function is designed according to the requirements of the different load conditions, and the optimal voltage vector action time is determined. The operation mode is analyzed to determine the distribution factor, so as to reduce the thrust pulsation during operation and improve the performance of the drive system. The results indicate that the proposed MPTFC method is effective in different operating modes, and the drive system has high efficiency and safer performance compared to a conventional drive system.
- Open Access
Application of Microwave Transmission Sensors for Water Cut Metering under Varying Salinity Conditions: Device, Algorithm and Uncertainty Analysis
The measurement of water cut in crude oil is an essential procedure in petroleum production and it is desirable to obtain these data through an automatic and real-time method. Microwave sensors can be used for the task, and they are safe, robust and can cover the whole water cut range. However, they are relatively susceptible to the water conductivity and temperature, and the algorithms for addressing these problems are still rare in the literature. In this paper, a microwave transmission sensor that can measure the water cut under varying salinity conditions is proposed, and the algorithm for solving the water cut and salinity simultaneously with the measured amplitude and phase is described in detail. Experiments under different water cut and salinity conditions are conducted, and the results are used to verify the model and algorithm. Finally, a simplified and fast method for uncertainty analysis is proposed and applied to the iteration algorithm under test conditions. It can be concluded that accuracy higher than 95% in the water cut measurements can be expected under the 0~100% water cut range, and an error of about 10% in the water conductivity is achievable under water-continuous flow conditions. The uncertainty analysis shows that the calculated water cut and salinity results are negatively correlated, and the water salinity uncertainty tends to be larger than the water cut uncertainty. When the water salinity is high, the water cut uncertainty tends to be high whereas the water salinity uncertainty tends to be low.
Open AccessApplication of Microwave Transmission Sensors for Water Cut Metering under Varying Salinity Conditions: Device, Algorithm and Uncertainty Analysis
The measurement of water cut in crude oil is an essential procedure in petroleum production and it is desirable to obtain these data through an automatic and real-time method. Microwave sensors can be used for the task, and they are safe, robust and can cover the whole water cut range. However, they are relatively susceptible to the water conductivity and temperature, and the algorithms for addressing these problems are still rare in the literature. In this paper, a microwave transmission sensor that can measure the water cut under varying salinity conditions is proposed, and the algorithm for solving the water cut and salinity simultaneously with the measured amplitude and phase is described in detail. Experiments under different water cut and salinity conditions are conducted, and the results are used to verify the model and algorithm. Finally, a simplified and fast method for uncertainty analysis is proposed and applied to the iteration algorithm under test conditions. It can be concluded that accuracy higher than 95% in the water cut measurements can be expected under the 0~100% water cut range, and an error of about 10% in the water conductivity is achievable under water-continuous flow conditions. The uncertainty analysis shows that the calculated water cut and salinity results are negatively correlated, and the water salinity uncertainty tends to be larger than the water cut uncertainty. When the water salinity is high, the water cut uncertainty tends to be high whereas the water salinity uncertainty tends to be low.