HGHao Guo

Hao Guo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hao Guo has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Investigating the Rheological Impact of USP Warm Mix Modifier on Asphalt Binder

    by Yali Liu, Jingfei Ping, Hao Guo, Yikai Kang, Yali Ye

    USP (usual temperature pitch)-modified asphalt optimizes its rheological properties through reactions between the modifier and the asphalt. This significantly enhances the high- and low-temperature adaptability and environmental friendliness of asphalt. It has now become an important research direction in the field of highway engineering. This article systematically investigates the impact of different dosages of USP warm mix modifier on asphalt binders through rheological and microstructural analysis. Base asphalt and SBS-modified asphalt were blended with USP at varying ratios. Conventional tests (penetration, softening point, ductility) were combined with dynamic shear rheometry (DSR, AASHTO T315) and bending beam rheometry (BBR, AASHTO T313) to characterize temperature/frequency-dependent viscoelasticity. High-temperature performance was quantified via multiple stress creep recovery (MSCR, ASTM D7405), while fluorescence microscopy and FTIR spectroscopy elucidated modification mechanisms. Key findings reveal that (1) optimal USP thresholds exist at 4.0% for base asphalt and 4.5% for SBS modified asphalt, beyond which the rutting resistance factor (G*/sin δ) decreases by 20–31% due to plasticization effects; (2) USP significantly improves low-temperature flexibility, reducing creep stiffness at −12 °C by 38% (USP-modified) and 35% (USP/SBS composite) versus controls; (3) infrared spectroscopy displays that no new characteristic peaks appeared in the functional group region of 4000–1300 cm−1 for the two types of modified asphalt after the incorporation of USP, indicating that no chemical changes occurred in the asphalt; and (4) fluorescence imaging confirmed that the incorporation of USP led to disintegration of the spatial network structure of the control asphalt, explaining the reason for the deterioration of high-temperature performance.


  • Open Access

    Study on Adhesion Performance and Aging Strength Degradation Mechanism of SBS Modified Asphalt with Different Anti-Aging Additive

    by Chuanyi Zhuang, Hao Guo, Fengxiang Li, Yan Hao, Kun Chen, Gen Li, Yali Ye

    After aging, the adhesiveness of asphalt deteriorates, leading to a reduction in the durability of asphalt mixtures and affecting the service life of asphalt pavements. To enhance the anti-aging performance of asphalt, this study employed the method of melt blending to prepare three types of modified asphalt: graphene/SBS modified asphalt (G/SBSMA), crumb rubber/SBS modified asphalt (CR/SBSMA), and petroleum resin/SBS modified asphalt (PR/SBSMA). Different dosages of the three types of modified asphalt were tested for changes in conventional performance indicators. The optimal dosages of graphene, crumb rubber, and C9 petroleum resin were determined to be 2%, 15%, and 5%, respectively. Based on the theory of surface free energy, the effects of anti-aging agents on the microscopic properties of SBS modified asphalt before and after aging were analyzed using the three-liquid method. The mechanisms of strength attenuation at the asphalt–aggregate interface under water exposure and aging were revealed. The results showed that with the increase of aging gradient, the asphalt-aggregate biphasic system became more active. The cohesive energy and peel energy of SBS modified asphalt increased continuously, while the adhesive energy decreased continuously, leading to a decrease in the energy ratio parameter. Resin-based anti-aging agents exhibited the most significant improvement in asphalt adhesion performance, while graphene demonstrated a more stable enhancement in asphalt’s water stability during the aging stage.


  • Open Access

    Study of Anti-Stripping Measures to Improve the Adhesion of Asphalt to Granite Aggregates

    by Shiqi Shu, Chuanyi Zhuang, Shuqian Zhao, Yan Hao, Hao Guo, Yali Ye

    Granite is very widely distributed in the world, but granite is an acidic aggregate with poor adhesion to asphalt. In untreated asphalt mixtures, asphalt pavement water damage and loose disease are more prominent, affecting the service life of the pavement and service level. Enhancing the road performance of granite asphalt mixture generally improves the adhesion properties of asphalt and granite. Qingchuan rock asphalt, anti-stripping agent KH5, aliphatic amine anti-stripping agent AJ-1 and two groups of the composite anti-stripping agents were used to modify the asphalt and analyze the effect of different anti-stripping agents on the improvement of asphalt-granite aggregate adhesion properties based on the surface free energy (SFE) theory. Second, the effect of anti-stripping agents on the rheological properties of asphalt were analyzed by rheological tests, and the modification effect of granite asphalt mixture road performance was evaluated by Marshall tests. The aging of asphalt and asphalt mixture was simulated by thermal oxygen aging, and the durability of different anti-stripping agents was investigated by comparing the performance of asphalt and asphalt mixtures before and after aging. The results showed that Qingchuan rock asphalt can effectively enhance the high-temperature stability and anti-aging properties of asphalt mixes, but the low temperature performance was relatively poor. KH5 and AJ-1 can make up for the lack of low temperature performance of rock asphalt, but the water stability of asphalt mixes decreases after aging. All five groups of anti-stripping agents improve the adhesion of granite-asphalt and the water stability of the asphalt mixture to some extent. Considering the aging effect, the order of granite-asphalt mixture water stability is: KH/RAMA > AJ/RAMA > RAMA > KHMA > AJMA.