Wenjuan Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Wenjuan Wang has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Minan Tang
Lanzhou Jiaotong University
9 shared publications - Yaqi Zhang
School of Automation and Electrical Engineering Lanzhou Jiaotong University Lanzhou China
7 shared publications - Bo An
School of Automation and Electrical Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China
5 shared publications - Yaguang Yan
School of Automation and Electrical Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China
5 shared publications - Bo An2 shared publications
- Jiandong Qiu
Lanzhou Jiaotong University
2 shared publications
Latest Publications
- Open Access
- 31 October 2024
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 110 (4) , 1-15
Longitudinal and Lateral Cooperative Control of Preview Intelligent Vehicles with Stabilization
Aiming at the highly nonlinear and coupled longitudinal and transverse motion control problems of intelligent vehicle path tracking control, a new method of preview MPC path tracking control is proposed by combining visual preview model and model predictive control theory. The method first locally linearizes the nonlinear prediction model and transforms the MPC optimization solution problem into a quadratic programming problem. The longitudinal vehicle speed and the preview distance are then treated as known in each control time domain, an exponential model is applied to characterize the longitudinal vehicle speed, and a transverse angular velocity-center of mass lateral deflection ( $$r-\beta $$ ) phase plane plot is applied to characterize the vehicle stability. Finally, proportional integral differential stability controller is designed to improve vehicle stability. Simulation and test results show that: Compared with the MPC tracking control method, the preview MPC control method proposed in this paper can optimize the vehicle tracking performance on different adhesion coefficient road surfaces and improve the tracking accuracy, and this enhancement effect is more obvious at high speeds.- 31 October 2024
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 110 (4) , 1-15
Open AccessLongitudinal and Lateral Cooperative Control of Preview Intelligent Vehicles with Stabilization
Aiming at the highly nonlinear and coupled longitudinal and transverse motion control problems of intelligent vehicle path tracking control, a new method of preview MPC path tracking control is proposed by combining visual preview model and model predictive control theory. The method first locally linearizes the nonlinear prediction model and transforms the MPC optimization solution problem into a quadratic programming problem. The longitudinal vehicle speed and the preview distance are then treated as known in each control time domain, an exponential model is applied to characterize the longitudinal vehicle speed, and a transverse angular velocity-center of mass lateral deflection ( $$r-\beta $$ ) phase plane plot is applied to characterize the vehicle stability. Finally, proportional integral differential stability controller is designed to improve vehicle stability. Simulation and test results show that: Compared with the MPC tracking control method, the preview MPC control method proposed in this paper can optimize the vehicle tracking performance on different adhesion coefficient road surfaces and improve the tracking accuracy, and this enhancement effect is more obvious at high speeds. - Open Access
Yaw Stability Control of Unmanned Emergency Supplies Transportation Vehicle Considering Two-Layer Model Predictive Control
The transportation of emergency supplies is characterized by real-time, urgent, and non-contact, which constitute the basic guarantee for emergency rescue and disposal. To improve the yaw stability of the four-wheel-drive unmanned emergency supplies transportation vehicle (ESTV) during operation, a two-layer model predictive controller (MPC) method based on a Kalman filter is proposed in this paper. Firstly, the dynamics model of the ESTV is established. Secondly, the improved Sage–Husa adaptive extended Kalman filter (SHAEKF) is used to decrease the impact of noise on the ESTV system. Thirdly, a two-layer MPC is designed for the yaw stability control of the ESTV. The upper-layer controller solves the yaw moment and the front wheel steering angle of the ESTV. The lower-layer controller optimizes the torque distribution of the four tires of the ESTV to ensure the self-stabilization of the ESTV operation. Finally, analysis and verification are carried out. The simulation results have verified that the improved SHAEKF can decrease the state estimation error by more than 78% and achieve the noise reduction of the ESTV state. Under extreme conditions of high velocity and low adhesion, the average relative error is within 6.77%. The proposed control method can effectively prevent the instability of the ESTV and maintain good yaw stability.
Open AccessYaw Stability Control of Unmanned Emergency Supplies Transportation Vehicle Considering Two-Layer Model Predictive Control
The transportation of emergency supplies is characterized by real-time, urgent, and non-contact, which constitute the basic guarantee for emergency rescue and disposal. To improve the yaw stability of the four-wheel-drive unmanned emergency supplies transportation vehicle (ESTV) during operation, a two-layer model predictive controller (MPC) method based on a Kalman filter is proposed in this paper. Firstly, the dynamics model of the ESTV is established. Secondly, the improved Sage–Husa adaptive extended Kalman filter (SHAEKF) is used to decrease the impact of noise on the ESTV system. Thirdly, a two-layer MPC is designed for the yaw stability control of the ESTV. The upper-layer controller solves the yaw moment and the front wheel steering angle of the ESTV. The lower-layer controller optimizes the torque distribution of the four tires of the ESTV to ensure the self-stabilization of the ESTV operation. Finally, analysis and verification are carried out. The simulation results have verified that the improved SHAEKF can decrease the state estimation error by more than 78% and achieve the noise reduction of the ESTV state. Under extreme conditions of high velocity and low adhesion, the average relative error is within 6.77%. The proposed control method can effectively prevent the instability of the ESTV and maintain good yaw stability.
- Open Access
A Dual-Layer MPC of Coordinated Control of Battery Load Demand and Grid-Side Supply Matching at Electric Vehicle Swapping Stations
The uncontrolled charging of electric vehicles may cause damage to the electrical system as the number of electric vehicles continues to rise. This paper aims to construct a new model of the power system and investigates the rational regulation and efficient control of electric vehicle battery charging at electric vehicle exchange battery stations in response to the real-time grid-side supply situation. Firstly, a multi-objective optimization strategy is established to meet the day-ahead forecasted swap demand and grid-side supply with the maximization of day-ahead electric vehicle battery swapping station (BSS) revenue in the core. Secondly, considering the variable tariff strategy, a two-layer Model Predictive Control (MPC) coordinated control system under real-time conditions is constructed with the objective function of maximizing the revenue of BSS and smoothing the load fluctuation of the power system. Then, the day-ahead optimization results are adopted as the reference value for in-day rolling optimization, and the reference value for in-day optimization is dynamically adjusted according to the real-time number of electric car changes and power system demand. Finally, verified by experimental simulation, the results show that the day-ahead-intraday optimization model can increase the economic benefits of BSS and reduce the pressure on the grid to a certain extent, and it can ensure the fast, accurate, and reasonable allocation of batteries in BSS, and realize the flexible, efficient, and reasonable distribution of batteries in BSS.
Open AccessA Dual-Layer MPC of Coordinated Control of Battery Load Demand and Grid-Side Supply Matching at Electric Vehicle Swapping Stations
The uncontrolled charging of electric vehicles may cause damage to the electrical system as the number of electric vehicles continues to rise. This paper aims to construct a new model of the power system and investigates the rational regulation and efficient control of electric vehicle battery charging at electric vehicle exchange battery stations in response to the real-time grid-side supply situation. Firstly, a multi-objective optimization strategy is established to meet the day-ahead forecasted swap demand and grid-side supply with the maximization of day-ahead electric vehicle battery swapping station (BSS) revenue in the core. Secondly, considering the variable tariff strategy, a two-layer Model Predictive Control (MPC) coordinated control system under real-time conditions is constructed with the objective function of maximizing the revenue of BSS and smoothing the load fluctuation of the power system. Then, the day-ahead optimization results are adopted as the reference value for in-day rolling optimization, and the reference value for in-day optimization is dynamically adjusted according to the real-time number of electric car changes and power system demand. Finally, verified by experimental simulation, the results show that the day-ahead-intraday optimization model can increase the economic benefits of BSS and reduce the pressure on the grid to a certain extent, and it can ensure the fast, accurate, and reasonable allocation of batteries in BSS, and realize the flexible, efficient, and reasonable distribution of batteries in BSS.
- Open Access
MPPT Strategy of Waterborne Bifacial Photovoltaic Power Generation System Based on Economic Model Predictive Control
At present, the new energy industry represented by photovoltaics has become the main force to realize the optimization of China’s energy structure and the goal of “double carbon”; with the absence of land resources, the waterborne bifacial photovoltaic has ushered in a new opportunity. Therefore, in order to address the problem that the maximum power point tracking (MPPT) of photovoltaics (PV) could not take into account, the dynamic economic performance in the control process, an economic model predictive control (EMPC), is proposed in this work to realize the MPPT of the waterborne bifacial PV power generation system. Firstly, the model of the bifacial PV module is constructed by combining the ray-tracing irradiance model and considering the effect of water surface albedo on the irradiance absorbed by the module. Secondly, the EMPC controller is designed based on the state-space model of the system to maximize the power generation as the economic performance index, and to solve the optimal input variables time by time to achieve a rolling optimization with the operational requirements of the system itself as the constraints. Thirdly, the MATLAB/Simulink (R2022a) simulation experimental results verify that the EMPC strategy could be utilized to achieve MPPT of the waterborne bifacial PV power generation system, according to the changes of environment. Finally, it is also demonstrated that the bifacial PV power generation system that employed the EMPC strategy outperformed the traditional MPPT algorithm, with respect to both output power tracking velocity and accuracy, and the power generation could be improved by about 6% to 14.5%, which significantly enhances the system’s dynamic process economics.
Open AccessMPPT Strategy of Waterborne Bifacial Photovoltaic Power Generation System Based on Economic Model Predictive Control
At present, the new energy industry represented by photovoltaics has become the main force to realize the optimization of China’s energy structure and the goal of “double carbon”; with the absence of land resources, the waterborne bifacial photovoltaic has ushered in a new opportunity. Therefore, in order to address the problem that the maximum power point tracking (MPPT) of photovoltaics (PV) could not take into account, the dynamic economic performance in the control process, an economic model predictive control (EMPC), is proposed in this work to realize the MPPT of the waterborne bifacial PV power generation system. Firstly, the model of the bifacial PV module is constructed by combining the ray-tracing irradiance model and considering the effect of water surface albedo on the irradiance absorbed by the module. Secondly, the EMPC controller is designed based on the state-space model of the system to maximize the power generation as the economic performance index, and to solve the optimal input variables time by time to achieve a rolling optimization with the operational requirements of the system itself as the constraints. Thirdly, the MATLAB/Simulink (R2022a) simulation experimental results verify that the EMPC strategy could be utilized to achieve MPPT of the waterborne bifacial PV power generation system, according to the changes of environment. Finally, it is also demonstrated that the bifacial PV power generation system that employed the EMPC strategy outperformed the traditional MPPT algorithm, with respect to both output power tracking velocity and accuracy, and the power generation could be improved by about 6% to 14.5%, which significantly enhances the system’s dynamic process economics.
- Open Access
Dynamic Parameter Identification of Collaborative Robot Based on WLS-RWPSO Algorithm
Parameter identification of the dynamic model of collaborative robots is the basis of the development of collaborative robot motion state control, path tracking, state monitoring, fault diagnosis, and fault tolerance systems, and is one of the core contents of collaborative robot research. Aiming at the identification of dynamic parameters of the collaborative robot, this paper proposes an identification algorithm based on weighted least squares and random weighted particle swarm optimization (WLS-RWPSO). Firstly, the dynamics mathematical model of the robot is established using the Lagrangian method, the dynamic parameters of the robot to be identified are determined, and the linear form of the dynamics model of the robot is derived taking into account the joint friction characteristics. Secondly, the weighted least squares method is used to obtain the initial solution of the parameters to be identified. Based on the traditional particle swarm optimization algorithm, a random weight particle swarm optimization algorithm is proposed for the local optimal problem to identify the dynamic parameters of the robot. Thirdly, the fifth-order Fourier series is designed as the excitation trajectory, and the original data collected by the sensor are denoised and smoothed by the Kalman filter algorithm. Finally, the experimental verification on a six-degree-of-freedom collaborative robot proves that the predicted torque obtained by the identification algorithm in this paper has a high degree of matching with the measured torque, and the established model can reflect the dynamic characteristics of the robot, effectively improving the identification accuracy.
Open AccessDynamic Parameter Identification of Collaborative Robot Based on WLS-RWPSO Algorithm
Parameter identification of the dynamic model of collaborative robots is the basis of the development of collaborative robot motion state control, path tracking, state monitoring, fault diagnosis, and fault tolerance systems, and is one of the core contents of collaborative robot research. Aiming at the identification of dynamic parameters of the collaborative robot, this paper proposes an identification algorithm based on weighted least squares and random weighted particle swarm optimization (WLS-RWPSO). Firstly, the dynamics mathematical model of the robot is established using the Lagrangian method, the dynamic parameters of the robot to be identified are determined, and the linear form of the dynamics model of the robot is derived taking into account the joint friction characteristics. Secondly, the weighted least squares method is used to obtain the initial solution of the parameters to be identified. Based on the traditional particle swarm optimization algorithm, a random weight particle swarm optimization algorithm is proposed for the local optimal problem to identify the dynamic parameters of the robot. Thirdly, the fifth-order Fourier series is designed as the excitation trajectory, and the original data collected by the sensor are denoised and smoothed by the Kalman filter algorithm. Finally, the experimental verification on a six-degree-of-freedom collaborative robot proves that the predicted torque obtained by the identification algorithm in this paper has a high degree of matching with the measured torque, and the established model can reflect the dynamic characteristics of the robot, effectively improving the identification accuracy.
- 8 February 2023
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 101 (10) , 5818-5831
Predictive control of SCR denitrification system in thermal power plants based on GA‐BP and PSO
Aiming at the characteristics of strong non‐linearity and large inertia in the reaction process of a selective catalytic reduction (SCR) denitrification system, a predictive control algorithm based on a back propagation neural network optimized by genetic algorithm (GA‐BP) and particle swarm optimization (PSO) is proposed. First, the prediction model of a SCR denitrification system is established by GA‐BP. Second, output feedback and bias correction are used to reduce the prediction error. Third, the optimal inlet ammonia concentration is obtained by PSO. At the same time, in order to solve the problems of high dimension, large noise, and strong coupling in the original data of the SCR system in the process of establishing the prediction model, the least absolute shrinkage selection operator (LASSO) algorithm and the local outlier factor (LOF) detection algorithm are used to screen important variables and samples in the original data set of the SCR system to remove redundant variables and outliers. Finally, the simulation results show that the prediction model has good prediction accuracy and that the proposed predictive control method can achieve accurate control of ammonia injection concentration. This method improves the denitrification efficiency and reduces the NOx emission concentration, which can provide good guidance for on‐site production.
- 8 February 2023
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 101 (10) , 5818-5831
Predictive control of SCR denitrification system in thermal power plants based on GA‐BP and PSO
Aiming at the characteristics of strong non‐linearity and large inertia in the reaction process of a selective catalytic reduction (SCR) denitrification system, a predictive control algorithm based on a back propagation neural network optimized by genetic algorithm (GA‐BP) and particle swarm optimization (PSO) is proposed. First, the prediction model of a SCR denitrification system is established by GA‐BP. Second, output feedback and bias correction are used to reduce the prediction error. Third, the optimal inlet ammonia concentration is obtained by PSO. At the same time, in order to solve the problems of high dimension, large noise, and strong coupling in the original data of the SCR system in the process of establishing the prediction model, the least absolute shrinkage selection operator (LASSO) algorithm and the local outlier factor (LOF) detection algorithm are used to screen important variables and samples in the original data set of the SCR system to remove redundant variables and outliers. Finally, the simulation results show that the prediction model has good prediction accuracy and that the proposed predictive control method can achieve accurate control of ammonia injection concentration. This method improves the denitrification efficiency and reduces the NOx emission concentration, which can provide good guidance for on‐site production.
- 1 January 2023
- Published by American Institute of Mathematical Sciences (AIMS) in Journal of Industrial and Management Optimization
- Vol. 19 (10) , 7616-7639
Trajectory tracking control of emergency supplies transport robots based on fuzzy MPC
'Contactless' distribution plays an important role in emergency supplies transportation, and the trajectory tracking control of emergency supplies transport robots is the key technology to achieving 'contactless' distribution precision. In this paper, a trajectory tracking control method for emergency supplies transport robots was proposed based on fuzzy MPC. Firstly, a kinematic model of the emergency supplies transport robots was established, and the motion parameters were identified by the recursive least square algorithm. Secondly, aiming at the velocity problem of trajectory tracking of emergency supplies transport robots, a fuzzy control method was proposed to optimize the velocity error dynamically. Thirdly, the model predictive control theory was introduced, and an expanded state observer was designed for the total disturbances to optimize the control of the tracking trajectory of the emergency supplies transport robots. Finally, a simulation model was built in Simulink, and the performance of the trajectory tracking controller was verified by co-simulation using CarSim/ Simulink. The simulation results show that, compared with the classical MPC trajectory tracking controller, the optimized velocity error MPC trajectory tracking controller improves the operational stability of the robots and the trajectory tracking accuracy by 13.18%.
- 1 January 2023
- Published by American Institute of Mathematical Sciences (AIMS) in Journal of Industrial and Management Optimization
- Vol. 19 (10) , 7616-7639
Trajectory tracking control of emergency supplies transport robots based on fuzzy MPC
'Contactless' distribution plays an important role in emergency supplies transportation, and the trajectory tracking control of emergency supplies transport robots is the key technology to achieving 'contactless' distribution precision. In this paper, a trajectory tracking control method for emergency supplies transport robots was proposed based on fuzzy MPC. Firstly, a kinematic model of the emergency supplies transport robots was established, and the motion parameters were identified by the recursive least square algorithm. Secondly, aiming at the velocity problem of trajectory tracking of emergency supplies transport robots, a fuzzy control method was proposed to optimize the velocity error dynamically. Thirdly, the model predictive control theory was introduced, and an expanded state observer was designed for the total disturbances to optimize the control of the tracking trajectory of the emergency supplies transport robots. Finally, a simulation model was built in Simulink, and the performance of the trajectory tracking controller was verified by co-simulation using CarSim/ Simulink. The simulation results show that, compared with the classical MPC trajectory tracking controller, the optimized velocity error MPC trajectory tracking controller improves the operational stability of the robots and the trajectory tracking accuracy by 13.18%.
- 1 January 2023
- Published by American Institute of Mathematical Sciences (AIMS) in Journal of Industrial and Management Optimization
- Vol. 19 (10) , 7401-7422
Motion control of photovoltaic module dust cleaning robotic arm based on model predictive control
Carbon neutralization has become a global consensus for green development, and solar photovoltaic power generation has become one of the key technologies for carbon reduction. The presence of dust on a photovoltaic module affects power generation, so the trajectory tracking control of dust removal robotic arm for photovoltaic modules is of great significance for improving power generation efficiency. In this study, a composite trajectory tracking strategy based on model predictive control is designed to track the desired angle of each joint, which is the control objective for the trajectory tracking of the photovoltaic module's dust cleaning robotic arm. The control strategy consists of a model predictive controller and a disturbance observer. Firstly, when there is no external disturbance acting on the system, and the robotic arm model is accurate, the trajectory tracking prediction optimization problem is constructed, and an error feedback correction mechanism is introduced so that the dust cleaning robotic arm tracks the desired trajectory asymptotically. Secondly, when there are model parameter deviations, system time variation, external disturbances, or other uncertain factors, a composite control strategy is established by combining the disturbance observer and model predictive control to compensate for the effects of disturbances through feedback, thus improving the stability and accuracy of the robotic arm control system. Finally, the feasibility of the composite control tracking strategy is verified by numerical simulation. The results show that the designed predictive controller has high error control accuracy and fast solution speed, and it can realize real-time and robust trajectory tracking of the robotic arm with a constrained dust cleaning assembly.
- 1 January 2023
- Published by American Institute of Mathematical Sciences (AIMS) in Journal of Industrial and Management Optimization
- Vol. 19 (10) , 7401-7422
Motion control of photovoltaic module dust cleaning robotic arm based on model predictive control
Carbon neutralization has become a global consensus for green development, and solar photovoltaic power generation has become one of the key technologies for carbon reduction. The presence of dust on a photovoltaic module affects power generation, so the trajectory tracking control of dust removal robotic arm for photovoltaic modules is of great significance for improving power generation efficiency. In this study, a composite trajectory tracking strategy based on model predictive control is designed to track the desired angle of each joint, which is the control objective for the trajectory tracking of the photovoltaic module's dust cleaning robotic arm. The control strategy consists of a model predictive controller and a disturbance observer. Firstly, when there is no external disturbance acting on the system, and the robotic arm model is accurate, the trajectory tracking prediction optimization problem is constructed, and an error feedback correction mechanism is introduced so that the dust cleaning robotic arm tracks the desired trajectory asymptotically. Secondly, when there are model parameter deviations, system time variation, external disturbances, or other uncertain factors, a composite control strategy is established by combining the disturbance observer and model predictive control to compensate for the effects of disturbances through feedback, thus improving the stability and accuracy of the robotic arm control system. Finally, the feasibility of the composite control tracking strategy is verified by numerical simulation. The results show that the designed predictive controller has high error control accuracy and fast solution speed, and it can realize real-time and robust trajectory tracking of the robotic arm with a constrained dust cleaning assembly.
- Open Access
Active Power Cooperative Control for Wind Power Clusters with Multiple Temporal and Spatial Scales
To improve the control of active power in wind power clusters, an active power hierarchical predictive control method with multiple temporal and spatial scales is proposed. First, the method from the spatial scale divides the wind power clusters into the cluster control layer, sub-cluster coordination layer and single wind farm power regulation layer. Simultaneously, from the temporal scale, the predicted data are divided layer by layer: the 15 min power prediction is deployed for the first layer; the 5 min power prediction is employed for the second layer; the 1 min power prediction is adopted for the third layer. Secondly, the prediction model was developed, and each hierarchical prediction was optimized using MPC. Thirdly, wind farms are dynamically clustered, and then the output power priority of wind farms is established. In addition, the active power of each wind farm is controlled according to the error between the dispatch value and the real-time power with feedback correction so that each wind farm achieves cooperative control with optimal power output. Finally, combined with the simulation of practical wind power clusters, the results show that the wind abandonment rate was reduced by 2.13%, and the dispatch of the blindness was overcome compared with the fixed proportional strategy. Therefore, this method can improve the efficiency of cooperative power generation.
Open AccessActive Power Cooperative Control for Wind Power Clusters with Multiple Temporal and Spatial Scales
To improve the control of active power in wind power clusters, an active power hierarchical predictive control method with multiple temporal and spatial scales is proposed. First, the method from the spatial scale divides the wind power clusters into the cluster control layer, sub-cluster coordination layer and single wind farm power regulation layer. Simultaneously, from the temporal scale, the predicted data are divided layer by layer: the 15 min power prediction is deployed for the first layer; the 5 min power prediction is employed for the second layer; the 1 min power prediction is adopted for the third layer. Secondly, the prediction model was developed, and each hierarchical prediction was optimized using MPC. Thirdly, wind farms are dynamically clustered, and then the output power priority of wind farms is established. In addition, the active power of each wind farm is controlled according to the error between the dispatch value and the real-time power with feedback correction so that each wind farm achieves cooperative control with optimal power output. Finally, combined with the simulation of practical wind power clusters, the results show that the wind abandonment rate was reduced by 2.13%, and the dispatch of the blindness was overcome compared with the fixed proportional strategy. Therefore, this method can improve the efficiency of cooperative power generation.