Ercan Düzgün
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ercan Düzgün has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Gürsel Şefkat
Bursa Uludag Universitesi
2 shared publications - Osman Kopmaz
Aeronautical Engineering Department, Istanbul Gelisim University, Avcılar, 34310 Istanbul, Türkiye, Turkey (Türkiye)
2 shared publications
Latest Publications
- Open Access
- 12 August 2026
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 10 (8) , 293
Learning from Demonstration for Robotic Deburring and Polishing: A Systematic Mapping Study
Contact-rich manufacturing processes, such as surface cleaning, deburring, and polishing, require precise force regulation and complex trajectory tracking that are challenging to automate using conventional robot programming methods. Learning from Demonstration (LfD) offers a powerful alternative to transfer these expert skills from human operators to robotic systems. The objective of this study is to systematically map academic publications addressing LfD applications in robotic deburring and polishing between 2016 and 2026, classify the algorithmic structures, sensory modalities, and control configurations employed, and identify key industrial integration challenges. In accordance with the PRISMA 2020 guidelines, a systematic search was conducted across Scopus, Web of Science, IEEE Xplore, and Google Scholar databases. Out of the 288 initially retrieved records, duplicate removal and a two-stage screening process (Title/Abstract review, followed by full-text review) resulted in a final corpus of 24 primary studies included for qualitative synthesis. The included studies were classified into five algorithmic clusters: Dynamic Movement Primitives (DMPs) and variants (9 out of 24 studies, 38%), probabilistic and statistical models (8 out of 24 studies, 33%), deep learning and generative AI architectures (4 out of 24 studies, 17%), autonomous dynamical systems (2 out of 24 studies, 8%), and direct impedance control (1 out of 24 studies, 4%). Force/torque sensing remains the dominant modality; it was utilized exclusively in 71%—17 out of 24—of studies and in 87.5% of studies as any configuration (either as a sole modality or in multimodal setups). However, recent years have documented a trend toward multimodal perception and generative action policies (e.g., Diffusion Policies). The findings suggest that while LfD offers potential cost-reduction and flexibility benefits for small- and medium-sized enterprises (SMEs), technical barriers, such as the sim-to-real transfer gap, high-frequency impact dynamics in deburring, and the autonomous identification of local non-polishing areas (LNP areas), continue to limit widespread industrial deployment.
- 12 August 2026
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 10 (8) , 293
Open AccessLearning from Demonstration for Robotic Deburring and Polishing: A Systematic Mapping Study
Contact-rich manufacturing processes, such as surface cleaning, deburring, and polishing, require precise force regulation and complex trajectory tracking that are challenging to automate using conventional robot programming methods. Learning from Demonstration (LfD) offers a powerful alternative to transfer these expert skills from human operators to robotic systems. The objective of this study is to systematically map academic publications addressing LfD applications in robotic deburring and polishing between 2016 and 2026, classify the algorithmic structures, sensory modalities, and control configurations employed, and identify key industrial integration challenges. In accordance with the PRISMA 2020 guidelines, a systematic search was conducted across Scopus, Web of Science, IEEE Xplore, and Google Scholar databases. Out of the 288 initially retrieved records, duplicate removal and a two-stage screening process (Title/Abstract review, followed by full-text review) resulted in a final corpus of 24 primary studies included for qualitative synthesis. The included studies were classified into five algorithmic clusters: Dynamic Movement Primitives (DMPs) and variants (9 out of 24 studies, 38%), probabilistic and statistical models (8 out of 24 studies, 33%), deep learning and generative AI architectures (4 out of 24 studies, 17%), autonomous dynamical systems (2 out of 24 studies, 8%), and direct impedance control (1 out of 24 studies, 4%). Force/torque sensing remains the dominant modality; it was utilized exclusively in 71%—17 out of 24—of studies and in 87.5% of studies as any configuration (either as a sole modality or in multimodal setups). However, recent years have documented a trend toward multimodal perception and generative action policies (e.g., Diffusion Policies). The findings suggest that while LfD offers potential cost-reduction and flexibility benefits for small- and medium-sized enterprises (SMEs), technical barriers, such as the sim-to-real transfer gap, high-frequency impact dynamics in deburring, and the autonomous identification of local non-polishing areas (LNP areas), continue to limit widespread industrial deployment.
- Open Access
- 10 July 2026
- Published by MDPI AG in Preprints.org
Learning from Demonstration for Robotic Deburring and Polishing: A Systematic Mapping Study
Contact-rich manufacturing processes such as surface cleaning, deburring, and polishing require precise force regulation and complex trajectory tracking that are challenging to automate using conventional robot programming methods. Learning from Demonstration (LfD) offers a powerful alternative to transfer these expert skills from human operators to robotic systems. The objective of this study is to systematically map academic publications addressing LfD applications in robotic deburring and polishing between 2016 and 2026, classify the algorithmic structures, sensory modalities, and control configurations employed, and identify key industrial integration challenges. In accordance with the PRISMA 2020 guidelines, a systematic search was conducted across Scopus, Web of Science, IEEE Xplore, and Google Scholar databases. Out of 288 initially retrieved records, duplicate removal and a two-stage screening process (title/abstract followed by full-text review) resulted in a final corpus of 24 primary studies included for qualitative synthesis. The included studies were classified into five algorithmic clusters: Dynamic Movement Primitives (DMPs) and variants (37.5%), probabilistic and statistical models (33.3%), deep learning and generative AI architectures (16.7%), autonomous dynamical systems (8.3%), and direct impedance control (4.2%). Force/torque sensing remains the dominant modality (70.8%), though recent years document a trend toward multimodal perception and generative action policies (e.g., Diffusion Policies). The findings confirm that while LfD offers substantial cost-reduction and flexibility benefits for small and medium-sized enterprises (SMEs), technical barriers such as the sim-to-real transfer gap, high-frequency impact dynamics in deburring, and the autonomous identification of local non-polishing areas (LNP-areas) continue to limit widespread industrial deployment.
- 10 July 2026
- Published by MDPI AG in Preprints.org
Open AccessLearning from Demonstration for Robotic Deburring and Polishing: A Systematic Mapping Study
Contact-rich manufacturing processes such as surface cleaning, deburring, and polishing require precise force regulation and complex trajectory tracking that are challenging to automate using conventional robot programming methods. Learning from Demonstration (LfD) offers a powerful alternative to transfer these expert skills from human operators to robotic systems. The objective of this study is to systematically map academic publications addressing LfD applications in robotic deburring and polishing between 2016 and 2026, classify the algorithmic structures, sensory modalities, and control configurations employed, and identify key industrial integration challenges. In accordance with the PRISMA 2020 guidelines, a systematic search was conducted across Scopus, Web of Science, IEEE Xplore, and Google Scholar databases. Out of 288 initially retrieved records, duplicate removal and a two-stage screening process (title/abstract followed by full-text review) resulted in a final corpus of 24 primary studies included for qualitative synthesis. The included studies were classified into five algorithmic clusters: Dynamic Movement Primitives (DMPs) and variants (37.5%), probabilistic and statistical models (33.3%), deep learning and generative AI architectures (16.7%), autonomous dynamical systems (8.3%), and direct impedance control (4.2%). Force/torque sensing remains the dominant modality (70.8%), though recent years document a trend toward multimodal perception and generative action policies (e.g., Diffusion Policies). The findings confirm that while LfD offers substantial cost-reduction and flexibility benefits for small and medium-sized enterprises (SMEs), technical barriers such as the sim-to-real transfer gap, high-frequency impact dynamics in deburring, and the autonomous identification of local non-polishing areas (LNP-areas) continue to limit widespread industrial deployment.
- Open Access
- 23 September 2025
- Published by MDPI AG in Preprints.org
Vibrations of Mass Grounded by Spring and Damper in Series
This paper is concerned with the vibrations of a mass connected to a wall or ground via a linear spring and a viscous damper arranged in series. Discrete models used to investigate the vibrations of machinery and structures often consist of a mass supported by a spring and damper in parallel or a series combination of such a system. However, models in which the spring and damper are connected in series are rarely encountered. To the authors' knowledge, there are no publications solely focused on the vibrations of a mass supported by a spring and a damper in series. In this paper, we demonstrate that the vibrational behaviour of such a system is entirely different from a system that comprises a mass with a parallel spring and damper combination. In contrast to the parallel combination, vibrations occur in this system when the damping ratio is greater than one. Another distinct result is that when the ratio of excitation frequency to the natural frequency of the system is set to zero, the frequency response function of the system with a serial combination goes to infinity. Thus, it does not correspond to the static loading case, unlike the system with a parallel combination. Furthermore, the transmissibility curves in such a system do not intersect at a certain value of the ratio of frequencies, whereas in the system with a parallel combination, these curves intersect when the ratios of frequencies are equal to 2. The system under consideration can suppress natural vibrations even for very small damping ratios, implying that this system can be used to control horizontal vibrations of a structure.
- 23 September 2025
- Published by MDPI AG in Preprints.org
Open AccessVibrations of Mass Grounded by Spring and Damper in Series
This paper is concerned with the vibrations of a mass connected to a wall or ground via a linear spring and a viscous damper arranged in series. Discrete models used to investigate the vibrations of machinery and structures often consist of a mass supported by a spring and damper in parallel or a series combination of such a system. However, models in which the spring and damper are connected in series are rarely encountered. To the authors' knowledge, there are no publications solely focused on the vibrations of a mass supported by a spring and a damper in series. In this paper, we demonstrate that the vibrational behaviour of such a system is entirely different from a system that comprises a mass with a parallel spring and damper combination. In contrast to the parallel combination, vibrations occur in this system when the damping ratio is greater than one. Another distinct result is that when the ratio of excitation frequency to the natural frequency of the system is set to zero, the frequency response function of the system with a serial combination goes to infinity. Thus, it does not correspond to the static loading case, unlike the system with a parallel combination. Furthermore, the transmissibility curves in such a system do not intersect at a certain value of the ratio of frequencies, whereas in the system with a parallel combination, these curves intersect when the ratios of frequencies are equal to 2. The system under consideration can suppress natural vibrations even for very small damping ratios, implying that this system can be used to control horizontal vibrations of a structure.
- Open Access
- 21 December 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (24) , 11990
The Design and Analysis of a Proportional Solenoid with Experimental Validation of Static and Dynamic Behavior
This study presents the design and analysis of a proportional solenoid used in electro-pneumatic brake systems for heavy vehicles. The solenoid was designed using a traditional method, and its static and dynamic characteristics were investigated both theoretically and experimentally. ANSYS 2024 R1 Maxwell was employed for theoretical static analysis, focusing on the effects of the geometric dimension parameters in the fixed and moving pole contact regions on the force–displacement characteristics. The optimal dimensions for proportionality were determined under constraint parameters. The static analysis results provided the magnetization curve data, which were used to create Look-Up Tables for a dynamic model in MATLAB R2024b-Simulink, and this method reduced the simulation time and increased the dynamic simulation accuracy. Following static analysis, a prototype electromagnet was manufactured and tested. The solenoid achieved a constant magnetic force of 45 ± 3 N with a current of 1.3 A over a working range of 1–3 mm. The dynamic model, incorporating data from ANSYS, yielded results that closely matched the experimental findings.
- 21 December 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (24) , 11990
Open AccessThe Design and Analysis of a Proportional Solenoid with Experimental Validation of Static and Dynamic Behavior
This study presents the design and analysis of a proportional solenoid used in electro-pneumatic brake systems for heavy vehicles. The solenoid was designed using a traditional method, and its static and dynamic characteristics were investigated both theoretically and experimentally. ANSYS 2024 R1 Maxwell was employed for theoretical static analysis, focusing on the effects of the geometric dimension parameters in the fixed and moving pole contact regions on the force–displacement characteristics. The optimal dimensions for proportionality were determined under constraint parameters. The static analysis results provided the magnetization curve data, which were used to create Look-Up Tables for a dynamic model in MATLAB R2024b-Simulink, and this method reduced the simulation time and increased the dynamic simulation accuracy. Following static analysis, a prototype electromagnet was manufactured and tested. The solenoid achieved a constant magnetic force of 45 ± 3 N with a current of 1.3 A over a working range of 1–3 mm. The dynamic model, incorporating data from ANSYS, yielded results that closely matched the experimental findings.
- Open Access
- 23 October 2024
- Published by MDPI AG in Preprints.org
Design and Analysis of a Proportional Electromagnet with Experimental Validation for Static and Dynamic Behavior
This study presents the design and analysis of a proportional electromagnet used in electro-pneumatic brake systems for heavy vehicles. The solenoid was designed using a traditional method and its static and dynamic characteristics were investigated both theoretically and experimentally. ANSYS Maxwell was employed for theoretical static analysis, focusing on the effects of geometric dimension parameters in the fixed and moving pole contact region on the Force-Displacement characteristics. Optimal dimensions for proportionality were determined under suitable operating conditions. The static analysis results provided magnetization curve data, which were used to create look-up tables for a dynamic model in MATLAB-Simulink. Following static analysis, a prototype electromagnet was manufactured and tested. The solenoid achieved a constant magnetic force of 45 ± 3N with a current of 1.3A over a working range of 1-3 mm. The dynamic model, incorporating data from ANSYS, yielded results that closely matched experimental findings.
- 23 October 2024
- Published by MDPI AG in Preprints.org
Open AccessDesign and Analysis of a Proportional Electromagnet with Experimental Validation for Static and Dynamic Behavior
This study presents the design and analysis of a proportional electromagnet used in electro-pneumatic brake systems for heavy vehicles. The solenoid was designed using a traditional method and its static and dynamic characteristics were investigated both theoretically and experimentally. ANSYS Maxwell was employed for theoretical static analysis, focusing on the effects of geometric dimension parameters in the fixed and moving pole contact region on the Force-Displacement characteristics. Optimal dimensions for proportionality were determined under suitable operating conditions. The static analysis results provided magnetization curve data, which were used to create look-up tables for a dynamic model in MATLAB-Simulink. Following static analysis, a prototype electromagnet was manufactured and tested. The solenoid achieved a constant magnetic force of 45 ± 3N with a current of 1.3A over a working range of 1-3 mm. The dynamic model, incorporating data from ANSYS, yielded results that closely matched experimental findings.
- Open Access
- 13 December 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (24) , 12811
Two Practical Methods for the Forward Kinematics of 3-3 Type Spatial and 3-RRR Planar Parallel Manipulators
The forward kinematics in parallel manipulators is a mathematically challenging issue, unlike serial manipulators. Kinematic constraint equations are non-linear transcendental equations that can be reduced to algebraic equations with appropriate transformations. For this reason, sophisticated and time-consuming methods such as the Bezout method, the Groebner bases method, and the like, are used. In this paper, we demonstrate that these equations can be solved by non-complicated mathematical methods for some special types of manipulators such as the 3-3 and 6-3 types of Stewart platforms, and the 3-RRR planar parallel manipulator. Our first method is an analytical approach that exploits the special structure of kinematic constraint equations and yields polynomials of 32nd and 16th order, as mentioned in the previous works. In the second method, an error function is defined. This error function is employed to find the most appropriate initial values for the non-linear equation solver which is used for solving kinematic constraint equations. Determining the initial values in this manner saves computation time and guarantees fast convergence to real solutions.
- 13 December 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (24) , 12811
Open AccessTwo Practical Methods for the Forward Kinematics of 3-3 Type Spatial and 3-RRR Planar Parallel Manipulators
The forward kinematics in parallel manipulators is a mathematically challenging issue, unlike serial manipulators. Kinematic constraint equations are non-linear transcendental equations that can be reduced to algebraic equations with appropriate transformations. For this reason, sophisticated and time-consuming methods such as the Bezout method, the Groebner bases method, and the like, are used. In this paper, we demonstrate that these equations can be solved by non-complicated mathematical methods for some special types of manipulators such as the 3-3 and 6-3 types of Stewart platforms, and the 3-RRR planar parallel manipulator. Our first method is an analytical approach that exploits the special structure of kinematic constraint equations and yields polynomials of 32nd and 16th order, as mentioned in the previous works. In the second method, an error function is defined. This error function is employed to find the most appropriate initial values for the non-linear equation solver which is used for solving kinematic constraint equations. Determining the initial values in this manner saves computation time and guarantees fast convergence to real solutions.