Akbar Tufail
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Akbar Tufail has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Ahmed Abdel Khalek Ebid
Structural Engineering & Construction Management Department, Future University in Egypt, Cairo 11835, Egypt
1 shared publication - Ehtesham Mehmood
Department of Civil Engineering, University of Engineering and Technology, Lahore 54890, Pakistan
1 shared publication - Imtiaz Rashid
Department of Civil Engineering, University of Engineering and Technology, Lahore 54890, Pakistan
1 shared publication - Khalid Farooq
Department of Civil Engineering, University of Engineering and Technology, Lahore, Pakistan
1 shared publication - Muhammad Farooq Ahmed
Department of Geological Engineering, University of Engineering and Technology, G.T. Road, Lahore, Pakistan
1 shared publication
Latest Publications
- Open Access
- 14 December 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (24) , 16740
Hydrogeotechnical Predictive Approach for Rockfall Mountain Hazard Using Elastic Modulus and Peak Shear Stress at Soil–Rock Interface in Dry and Wet Phases at KKH Pakistan
Predicting the susceptibility of rockfall mountain hazards for block-in-matrix soils is challenging for critical steep cuts. This research illustrates a hydrogeotechnical approach for the prediction of rockfall triggering by performing laboratory tests on low-cohesive-matrix soil collected from steep slopes with 85° to 88° angles at the Tatta Pani site, Karakorum Highway (KKH), and then real-scale moisture-induced rockfall was conducted on site for the validation of laboratory data. Laboratory data of forty quick direct shear tests on samples collected from the field depicted a 3-fold drop in peak shear stress (PS) at the soil–soil interface and a 9.3-fold drop at the soil–rock interface by varying the moisture content from 1% (taken as dry phase) to a critical laboratory moisture content (MC)LC of 21% (taken as wet phase). Similarly, a drop in the elastic modulus (ES) was observed to be 5.7-fold at the soil–soil interface and 10-fold at the soil–rock interface for a variation of moisture content from 1 % to 21% for the matrix with a permeability (k) range of 3 × 10−4 to 5.6 × 10−4 m/s, which depicts the criticality of moisture content for the rockfall phenomenon. The critical moisture content evaluated in laboratory is validated by an innovative field-inundation method for thirty-two moisture-induced real-scale forced rockfall cases, which showed the rock-block triggering at field dry density (γd)f and the critical field moisture content (MC)FC of the matrix ranging from 1.78 g/cm3 to 1.92 g/cm3, and 1.3% to 25.4%, respectively. Hydrogeotechnical relations, i.e., MC versus PS and ES, at the soil–rock interface are developed for the prediction of rockfall triggering. The proposed correlations may be helpful in the prediction of rockfall hazards by using expected rainfall in the field for disaster warning and landslide disaster prevention at ecological geotechnical engineering projects. The results revealed that the critical (MC)FC and (MC)LC are within 20%, depicting a good confidence level of the outcomes of this research.
- 14 December 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (24) , 16740
Open AccessHydrogeotechnical Predictive Approach for Rockfall Mountain Hazard Using Elastic Modulus and Peak Shear Stress at Soil–Rock Interface in Dry and Wet Phases at KKH Pakistan
Predicting the susceptibility of rockfall mountain hazards for block-in-matrix soils is challenging for critical steep cuts. This research illustrates a hydrogeotechnical approach for the prediction of rockfall triggering by performing laboratory tests on low-cohesive-matrix soil collected from steep slopes with 85° to 88° angles at the Tatta Pani site, Karakorum Highway (KKH), and then real-scale moisture-induced rockfall was conducted on site for the validation of laboratory data. Laboratory data of forty quick direct shear tests on samples collected from the field depicted a 3-fold drop in peak shear stress (PS) at the soil–soil interface and a 9.3-fold drop at the soil–rock interface by varying the moisture content from 1% (taken as dry phase) to a critical laboratory moisture content (MC)LC of 21% (taken as wet phase). Similarly, a drop in the elastic modulus (ES) was observed to be 5.7-fold at the soil–soil interface and 10-fold at the soil–rock interface for a variation of moisture content from 1 % to 21% for the matrix with a permeability (k) range of 3 × 10−4 to 5.6 × 10−4 m/s, which depicts the criticality of moisture content for the rockfall phenomenon. The critical moisture content evaluated in laboratory is validated by an innovative field-inundation method for thirty-two moisture-induced real-scale forced rockfall cases, which showed the rock-block triggering at field dry density (γd)f and the critical field moisture content (MC)FC of the matrix ranging from 1.78 g/cm3 to 1.92 g/cm3, and 1.3% to 25.4%, respectively. Hydrogeotechnical relations, i.e., MC versus PS and ES, at the soil–rock interface are developed for the prediction of rockfall triggering. The proposed correlations may be helpful in the prediction of rockfall hazards by using expected rainfall in the field for disaster warning and landslide disaster prevention at ecological geotechnical engineering projects. The results revealed that the critical (MC)FC and (MC)LC are within 20%, depicting a good confidence level of the outcomes of this research.