Alcino Matos de Azevedo Pontes Neto
Research Subjects
Alcino Matos de Azevedo Pontes Neto has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
Dhessyca Maria Vitoria Gonçalves Soares
Graduate Program in Chemical Engineering, Institute of Technology
2 shared publications- Marlice Cruz Martelli
Faculdade de Engenharia Química, Instituto de Tecnologia, Universidade Federal do Pará, Rua Augusto Corrêa 01, 66075-110 Belém, Brasil
2 shared publications Anderson Yuri Martins da Silva
1 shared publicationDavi Do Socorro Barros Brasil
Graduate Program in Chemical Engineering, Institute of Technology
1 shared publication- Isabelle Cristina Cruz Pereira
Universidade federal do Pará
1 shared publication Marlice Cruz Martelli
Graduate Program in Chemical Engineering, Institute of Technology
1 shared publication
Latest Publications
- Open Access
- 28 May 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (22) , 32862-32872
Spouted Bed Drying of Fresh Papaya Seeds ( Carica papaya L.): Hydrodynamic Behavior and Statistical Analysis
The processing of papaya (Carica papaya L.) generates substantial volumes of bioactive-rich seed residues that require efficient drying to prevent degradation. However, the hydrodynamic behavior of fresh seeds, characterized by high surface moisture and mucilaginous adhesion, remains poorly documented under spouted bed conditions. This study systematically investigated the drying performance of papaya seeds using a Box–Behnken experimental design. Initial trials showed that removing the sarcotesta drastically reduced the minimum spouting velocity (ums) from 1.94 to 0.98 ms–1 and the peak pressure dropped from 1200 to 490 Pa, highlighting the dominant role of surface cohesion. A 15 min flash-drying pretreatment at 4 m3 min–1 was essential to reduce surface stickiness and enable stable spouting. The experimental design evaluated air temperature (40–60 °C), processing time (20–60 min), and airflow rate (1.0–2.0 m3 min–1). Quadratic regression models for moisture content and water activity (aw) exhibited excellent fit (R2 > 0.99; Radj2 > 0.97) with no significant lack of fit (p > 0.05). Multiresponse optimization via desirability profile (≈60 °C, ≈60 min, and 1.61 m3 min–1) converged with experimental results (U = 7.2% and aw = 0.57), reaching the thermodynamic safety threshold (aw < 0.60) for microbial inhibition. These findings demonstrate the potential of spouted bed technology for the scalable and sustainable valorization of sticky agro-industrial residues, ensuring material stability for future bioactive compound extraction.
- 28 May 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (22) , 32862-32872
Open AccessSpouted Bed Drying of Fresh Papaya Seeds ( Carica papaya L.): Hydrodynamic Behavior and Statistical Analysis
The processing of papaya (Carica papaya L.) generates substantial volumes of bioactive-rich seed residues that require efficient drying to prevent degradation. However, the hydrodynamic behavior of fresh seeds, characterized by high surface moisture and mucilaginous adhesion, remains poorly documented under spouted bed conditions. This study systematically investigated the drying performance of papaya seeds using a Box–Behnken experimental design. Initial trials showed that removing the sarcotesta drastically reduced the minimum spouting velocity (ums) from 1.94 to 0.98 ms–1 and the peak pressure dropped from 1200 to 490 Pa, highlighting the dominant role of surface cohesion. A 15 min flash-drying pretreatment at 4 m3 min–1 was essential to reduce surface stickiness and enable stable spouting. The experimental design evaluated air temperature (40–60 °C), processing time (20–60 min), and airflow rate (1.0–2.0 m3 min–1). Quadratic regression models for moisture content and water activity (aw) exhibited excellent fit (R2 > 0.99; Radj2 > 0.97) with no significant lack of fit (p > 0.05). Multiresponse optimization via desirability profile (≈60 °C, ≈60 min, and 1.61 m3 min–1) converged with experimental results (U = 7.2% and aw = 0.57), reaching the thermodynamic safety threshold (aw < 0.60) for microbial inhibition. These findings demonstrate the potential of spouted bed technology for the scalable and sustainable valorization of sticky agro-industrial residues, ensuring material stability for future bioactive compound extraction.
- Open Access
- 26 June 2023
- Published by Editora e-Publicar
- p. 146-159
CARVÃO ATIVADO OBTIDO DA CASCA DE COCO VERDE PARA REMOÇÃO DE CORANTE AM EM MEIO AQUOSO: CARACTERIZAÇÃO E CINÉTICA DE ADSORÇÃO
- 26 June 2023
- Published by Editora e-Publicar
- p. 146-159
Open AccessCARVÃO ATIVADO OBTIDO DA CASCA DE COCO VERDE PARA REMOÇÃO DE CORANTE AM EM MEIO AQUOSO: CARACTERIZAÇÃO E CINÉTICA DE ADSORÇÃO
- Open Access
- 27 November 2022
- Published by Research, Society and Development in Research, Society and Development
- Vol. 11 (16)
O uso de compostos zeolíticos como adsorventes para a remoção de metais pesados (Pb, Cu, Cr e Mn): uma revisão
Industrial disposal of heavy metals, especially lead, copper, chromium and manganese, promotes environmental contamination and directly affects human health. In order to minimize the impact generated by these contaminants, adsorption has been a practice used due to its simplicity and low cost/benefit ratio. Thus, natural materials such as zeolite compounds are highly efficient in removing these metals. the objective of this work is to expose the results of a systematic literature review on the use of zeolite as an adsorbent in the process of removing lead, chromium, manganese and copper ions from industrial effluents. The research was carried out in journals of national and international databases, in the last six years, with adsorption efficiency of contaminating metals greater than 70%. In the research carried out, it was possible to verify the high efficiency of removal of cations by means of zeolites, largely due to their geomorphology and the physicochemical treatments performed.
- 27 November 2022
- Published by Research, Society and Development in Research, Society and Development
- Vol. 11 (16)
Open AccessO uso de compostos zeolíticos como adsorventes para a remoção de metais pesados (Pb, Cu, Cr e Mn): uma revisão
Industrial disposal of heavy metals, especially lead, copper, chromium and manganese, promotes environmental contamination and directly affects human health. In order to minimize the impact generated by these contaminants, adsorption has been a practice used due to its simplicity and low cost/benefit ratio. Thus, natural materials such as zeolite compounds are highly efficient in removing these metals. the objective of this work is to expose the results of a systematic literature review on the use of zeolite as an adsorbent in the process of removing lead, chromium, manganese and copper ions from industrial effluents. The research was carried out in journals of national and international databases, in the last six years, with adsorption efficiency of contaminating metals greater than 70%. In the research carried out, it was possible to verify the high efficiency of removal of cations by means of zeolites, largely due to their geomorphology and the physicochemical treatments performed.