Anes Kazagic
Research Subjects
Anes Kazagic has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Nihad Hodzic
University of Sarajevo
4 shared publications - Kenan Kadic
Elektroprivreda BiH d.d. - Sarajevo Power utility, Power plant Kakanj - Kakanj, 72240 Kakanj, Bosnia and Herzegovina
3 shared publications - Abiodun Emmanuel Onile
22Department of Software Science, Tallinn University of Technology, Akadeemia tee 15A, Tallinn 12618, Estonia
1 shared publication Ajla Merzic
Power utility JP Elektroprivreda BiH d.d. Sarajevo, Strategic development department Sarajevo, Bosnia and Herzegovina
1 shared publication- Alberto Cuoci
Politecnico di Milano P.zza Leonardo da Vinci 32
1 shared publication - Alessandro Della Rocca
MOX -Modelling and Scientific Computing Dipartimento di Matematica Politecnico di Milano Via Bonardi 9 20133 Milano Italy
1 shared publication
Latest Publications
- 17 July 2026
- Published by Springer Nature
- p. 391-399
Characteristics of Pulverized Co-firing of Brown Coal and Black Pellets
- 17 July 2026
- Published by Springer Nature
- p. 391-399
Characteristics of Pulverized Co-firing of Brown Coal and Black Pellets
- Open Access
- 2 May 2026
- Published by IOP Publishing in Journal of Physics: Energy
- Vol. 8 (2)
A roadmap for decarbonizing energy-intensive industries with renewable synthetic fuels and digital technologies
Decarbonizing energy-intensive and other hard-to-abate sectors remains essential for meeting climate targets, yet these sectors continue to depend on fuels for high-temperature heat, chemical feedstocks, and energy-dense transport applications. This roadmap assesses the potential role of renewable synthetic fuels (RSFs) in supporting this transition, with a primary focus on the European context and on sectors including steel, cement, glass, aviation, shipping, and power generation. It reviews the current status of RSF combustion science, the high-fidelity experimental and numerical data needed to understand fuel behavior under relevant conditions, and the emerging hybrid physics-based and data-driven modeling approaches that can accelerate progress. Particular attention is given to digital twins and related cyber-physical tools as enabling technologies for process optimization, monitoring, scale-bridging, and industrial implementation. The roadmap also examines practical deployment barriers, including fuel availability, infrastructure, safety, regulatory frameworks, policy barriers, and data integration challenges. Developed in the framework of the CYPHER COST Action, it highlights that large-scale RSF deployment will require coordinated action across research, industry, and policy, together with stronger business cases, demand-stimulating policies, and workforce development.
- 2 May 2026
- Published by IOP Publishing in Journal of Physics: Energy
- Vol. 8 (2)
Open AccessA roadmap for decarbonizing energy-intensive industries with renewable synthetic fuels and digital technologies
Decarbonizing energy-intensive and other hard-to-abate sectors remains essential for meeting climate targets, yet these sectors continue to depend on fuels for high-temperature heat, chemical feedstocks, and energy-dense transport applications. This roadmap assesses the potential role of renewable synthetic fuels (RSFs) in supporting this transition, with a primary focus on the European context and on sectors including steel, cement, glass, aviation, shipping, and power generation. It reviews the current status of RSF combustion science, the high-fidelity experimental and numerical data needed to understand fuel behavior under relevant conditions, and the emerging hybrid physics-based and data-driven modeling approaches that can accelerate progress. Particular attention is given to digital twins and related cyber-physical tools as enabling technologies for process optimization, monitoring, scale-bridging, and industrial implementation. The roadmap also examines practical deployment barriers, including fuel availability, infrastructure, safety, regulatory frameworks, policy barriers, and data integration challenges. Developed in the framework of the CYPHER COST Action, it highlights that large-scale RSF deployment will require coordinated action across research, industry, and policy, together with stronger business cases, demand-stimulating policies, and workforce development.
- 1 January 2023
- Published by University Library in Kragujevac in Energija Ekonomija Ekologija
- Vol. XXV (1) , 1-9
Primjenom otpadne drvne biomase i Miscanthusa do održivog sektora termoenergetike u vremenu energetske tranzicije / Sustainable Energy Sector Using Waste Woody Biomass and Miscanthus in the Energy Transition
The thermal energy sector is very important at this time of global energy transition. From the aspect of stable energy independence, this is especially important in countries whose energy system is based on fossil fuels, especially coal. This is why decarbonisation of the energy sector is necessary, with a partial and gradual substitution of coal with renewable fuels. However, the use of these fuels is not always possible in existing plants. This refers to the establishment of energy, economic and environmentally acceptable proportion of the co-firing of these fuels, i.e. a mixture of coal and renewable fuels. The success of the establishment of this process is a function of several variables, the dominant of which are the aggregate properties of the fuel, basic and their mixtures, including the ash properties of those fuels. With the motive of contributing to a more successful implementation of the energy transition in the thermal energy sector, and with the aim of obtaining new scientific knowledge about the characteristics of the combustion of lignite and brown coal with different renewable fuels, laboratory research was carried out. In particular, different mixtures of lignite and brown coal, waste woody biomass and Miscanthus as a fast-growing energy crop were subjected to co-firing with variable process conditions. In addition to changing the composition of fuel mixtures, the test regimes included a significant change in process temperature (1250-1450 °C) and the primary measure of staged air supply to the furnace. In these combustion conditions, the emission of undesirable and harmful components into the environment, the efficiency of combustion, and the tendency of the ash from the fuel mixture to possible soiling of the heating surfaces in the furnace were evaluated - an analysis of the characteristics of the ash samples from the reaction zone and samples of the slag and ash to the furnace. Here, in both cases of co-firing, lignite and brown coal with different types of biomass, it was shown that in real conditions it is possible to establish a sustainable primary energy conversion process from fuel with a low unburnt carbon content in the slag (unburnt carbon content, UBC<1%) as well as low CO emission, below 350 mg/mn 3. At the same time, the NOx emission is below 320 mg/mn 3 during the co-firing of lignite mixtures at 1250 °C, and in the case of brown coal mixtures below 740 mg/mn 3 at 1450 °C. In both cases, the net CO2 emission decreases in proportion to the proportion of biomass in the mixture, while the SO2 emission is still high, at a level of up to 2500 mg/mn 3 for lignite mixtures and up to 6400 mg/mn 3 for brown coal mixtures. None of the treated types of biomass, up to the level of applicable content in the mixture with lignite and brown coal, does not worsen the progress of the process from the aspect of possible slagging/fouling heating surfaces in the boiler.
- 1 January 2023
- Published by University Library in Kragujevac in Energija Ekonomija Ekologija
- Vol. XXV (1) , 1-9
Primjenom otpadne drvne biomase i Miscanthusa do održivog sektora termoenergetike u vremenu energetske tranzicije / Sustainable Energy Sector Using Waste Woody Biomass and Miscanthus in the Energy Transition
The thermal energy sector is very important at this time of global energy transition. From the aspect of stable energy independence, this is especially important in countries whose energy system is based on fossil fuels, especially coal. This is why decarbonisation of the energy sector is necessary, with a partial and gradual substitution of coal with renewable fuels. However, the use of these fuels is not always possible in existing plants. This refers to the establishment of energy, economic and environmentally acceptable proportion of the co-firing of these fuels, i.e. a mixture of coal and renewable fuels. The success of the establishment of this process is a function of several variables, the dominant of which are the aggregate properties of the fuel, basic and their mixtures, including the ash properties of those fuels. With the motive of contributing to a more successful implementation of the energy transition in the thermal energy sector, and with the aim of obtaining new scientific knowledge about the characteristics of the combustion of lignite and brown coal with different renewable fuels, laboratory research was carried out. In particular, different mixtures of lignite and brown coal, waste woody biomass and Miscanthus as a fast-growing energy crop were subjected to co-firing with variable process conditions. In addition to changing the composition of fuel mixtures, the test regimes included a significant change in process temperature (1250-1450 °C) and the primary measure of staged air supply to the furnace. In these combustion conditions, the emission of undesirable and harmful components into the environment, the efficiency of combustion, and the tendency of the ash from the fuel mixture to possible soiling of the heating surfaces in the furnace were evaluated - an analysis of the characteristics of the ash samples from the reaction zone and samples of the slag and ash to the furnace. Here, in both cases of co-firing, lignite and brown coal with different types of biomass, it was shown that in real conditions it is possible to establish a sustainable primary energy conversion process from fuel with a low unburnt carbon content in the slag (unburnt carbon content, UBC<1%) as well as low CO emission, below 350 mg/mn 3. At the same time, the NOx emission is below 320 mg/mn 3 during the co-firing of lignite mixtures at 1250 °C, and in the case of brown coal mixtures below 740 mg/mn 3 at 1450 °C. In both cases, the net CO2 emission decreases in proportion to the proportion of biomass in the mixture, while the SO2 emission is still high, at a level of up to 2500 mg/mn 3 for lignite mixtures and up to 6400 mg/mn 3 for brown coal mixtures. None of the treated types of biomass, up to the level of applicable content in the mixture with lignite and brown coal, does not worsen the progress of the process from the aspect of possible slagging/fouling heating surfaces in the boiler.
- 1 January 2022
- Published by University Library in Kragujevac in Energija Ekonomija Ekologija
- Vol. XXIV (3) , 1-6
Effects of Natural Gas Application in Combustion of Pulverized Solid Fuels – Reburning Technology
The energy transition basically implies a phased and significant reduction in the use of fossil fuels, until the final cessation of use in the near future. Renewable energy sources and alternative fuels are an increasingly important part of the energy transition. At the same time, it is necessary that energy systems increase energy efficiency and environmental acceptability. In this regard, great efforts are being made to expand the portfolio of primary fuels in existing large energy systems, e.g. thermal power plants. Therefore, today in large boilers, in order to reduce NOx emission, staged air supply for combustion is inevitably used as the primary measure in the furnace (air staging). In addition to the previous measure, there are many examples of staged fuel supply to the combustion zone (fuel staging), and still a small number of examples of the use of third or additional fuel, e.g. application of biogas or natural gas in combustion of pulverized solid fuels (reburning technology). General, these measures simultaneously increase the efficiency of primary energy conversion from fuel and reduce the emission of undesirable components into the environment. The results of this paper show the extent to which the effects of the use of natural gas in the co-firing of Bosnian coal and waste wood biomass are expressed. In this process there is an additional reduction of NOx in proportion to the share of gas - at a process temperature of 1350 °C and at 10% of the energy content of gas in combustion with coal, compared to emissions without additional fuel, recorded reduction of NOx emissions by more than 250 mg/mn 3.
- 1 January 2022
- Published by University Library in Kragujevac in Energija Ekonomija Ekologija
- Vol. XXIV (3) , 1-6
Effects of Natural Gas Application in Combustion of Pulverized Solid Fuels – Reburning Technology
The energy transition basically implies a phased and significant reduction in the use of fossil fuels, until the final cessation of use in the near future. Renewable energy sources and alternative fuels are an increasingly important part of the energy transition. At the same time, it is necessary that energy systems increase energy efficiency and environmental acceptability. In this regard, great efforts are being made to expand the portfolio of primary fuels in existing large energy systems, e.g. thermal power plants. Therefore, today in large boilers, in order to reduce NOx emission, staged air supply for combustion is inevitably used as the primary measure in the furnace (air staging). In addition to the previous measure, there are many examples of staged fuel supply to the combustion zone (fuel staging), and still a small number of examples of the use of third or additional fuel, e.g. application of biogas or natural gas in combustion of pulverized solid fuels (reburning technology). General, these measures simultaneously increase the efficiency of primary energy conversion from fuel and reduce the emission of undesirable components into the environment. The results of this paper show the extent to which the effects of the use of natural gas in the co-firing of Bosnian coal and waste wood biomass are expressed. In this process there is an additional reduction of NOx in proportion to the share of gas - at a process temperature of 1350 °C and at 10% of the energy content of gas in combustion with coal, compared to emissions without additional fuel, recorded reduction of NOx emissions by more than 250 mg/mn 3.
- Open Access
Co-Combustion of Low-Rank Coal with Woody Biomass and Miscanthus: An Experimental Study
This paper presents a research on ash-related problems and emissions during co-firing low-rank Bosnian coals with different kinds of biomass; in this case woody sawdust and herbaceous energy crops Miscanthus. An entrained-flow drop tube furnace was used for the tests, varying fuel portions at a high co-firing ratio up to 30%wt woody sawdust and 10%wt Miscanthus in a fuel blend. The tests were supposed to optimize the process temperature, air distribution (including OFA) and fuel distributions (reburning) as function of SO2 and NOx emissions as well as efficiency of combustion process estimated through the ash deposits behaviors, CO emissions and unburnt. The results for 12 co-firing fuel combinations impose a reasonable expectation that the coal/biomass/Miscanthus blends could be successfully run under certain conditions not producing any serious ash-related problems. SO2 emissions were slightly higher when higher content of woody biomass was used. Oppositely, higher Miscanthus percentage in the fuel mix slightly decreases SO2 emissions. NOx emissions generally decrease with an increase of biomass co-firing rate. The study suggests that co-firing Bosnian coals with woody sawdust and Miscanthus shows promise at higher co-firing ratios for pulverized combustion, giving some directions for further works in co-firing similar multi-fuel combinations.
Open AccessCo-Combustion of Low-Rank Coal with Woody Biomass and Miscanthus: An Experimental Study
This paper presents a research on ash-related problems and emissions during co-firing low-rank Bosnian coals with different kinds of biomass; in this case woody sawdust and herbaceous energy crops Miscanthus. An entrained-flow drop tube furnace was used for the tests, varying fuel portions at a high co-firing ratio up to 30%wt woody sawdust and 10%wt Miscanthus in a fuel blend. The tests were supposed to optimize the process temperature, air distribution (including OFA) and fuel distributions (reburning) as function of SO2 and NOx emissions as well as efficiency of combustion process estimated through the ash deposits behaviors, CO emissions and unburnt. The results for 12 co-firing fuel combinations impose a reasonable expectation that the coal/biomass/Miscanthus blends could be successfully run under certain conditions not producing any serious ash-related problems. SO2 emissions were slightly higher when higher content of woody biomass was used. Oppositely, higher Miscanthus percentage in the fuel mix slightly decreases SO2 emissions. NOx emissions generally decrease with an increase of biomass co-firing rate. The study suggests that co-firing Bosnian coals with woody sawdust and Miscanthus shows promise at higher co-firing ratios for pulverized combustion, giving some directions for further works in co-firing similar multi-fuel combinations.
- 24 November 2016
- Published by Springer Nature
- p. 187-194
Bosnia and Herzegovina’s Power System: From the First Luminaires to the Modern Power System. Part I: History
- 24 November 2016
- Published by Springer Nature
- p. 187-194
Bosnia and Herzegovina’s Power System: From the First Luminaires to the Modern Power System. Part I: History