Thomas Frasson

Flux de chaleur hétérogène dans des simulations de convection mantellique : impact sur la géodynamo et les inversions magnétiques: Le champ magnétique terrestre est généré par la convection du fer liquide dans le noyau, éléctriquementconducteur, produisant un effet dynamo. Ce processus, appelé géodynamo, maintientun champ magnétique depuis des milliards d’années. Les données paléomagnétiques montrent quele comportement de la géodynamo a changé au cours des temps géologiques. Ces changementsde comportement sont visibles à travers les variations de l’amplitude et de la stabilité du dipôlemagnétique. Les variations du flux de chaleur à la limite entre le noyau et le manteau (CMB) duesà la convection mantellique ont été suggérées comme un mécanisme capable d’entraîner un telchangement de comportement.Les modèles numériques de convection mantellique et de la géodynamo ont connu des améliorationssignificatives ces dernières années. Le couplage entre ces deux types de modèle peutdonner des indications sur la façon dont la géodynamo réagit aux variations de flux de chaleurà la CMB. Notre compréhension actuelle de ce couplage entre le manteau et le noyau est néanmoinsrestreinte par les limitations des modèles numériques. Du côté du manteau, l’orientationdu manteau par rapport à l’axe de rotation doit être mieux contrainte afin d’exploiter les récentessimulations reproduisant environ 1 Gyr de convection mantellique. Pour contraindre cette orientation,l’axe de plus grand moment d’inertie du manteau doit être aligné avec l’axe de rotation de laTerre, ce qui provoque des rotations du manteau appelées "true polar wander" (TPW). Du côté dunoyau, les simulations numériques sont encore loin du régime de paramètre de la Terre, et il n’estpas certain que le mécanisme d’inversion observé dans ces modèles soit pertinent pour le noyaude la Terre.Ce travail vise à mieux contraindre la façon dont les hétérogénéités de flux de chaleur à laCMB affectent la géodynamo. Dans une première partie, nous explorons l’impact du TPW surle flux de chaleur à la CMB en utilisant deux modèles de convection mantellique récemmentpubliés : un modèle contraint par une reconstruction de plaque et un second produisant de manièreautocohèrente un comportement de tectonique des plaques. Le géoïde est calculé pour corriger leTPW. Une alternative à la correction du TPW est utilisée pour le modèle contraint par la positiondes plaques en repositionnant simplement le manteau dans le référentiel paléomagnétique. Dansce modèle, l’axe de plus grand moment d’inertie n’est pas cohérent avec la position du dipôlemagnétique déduite du paléomagnétisme. Le TPW joue un rôle important dans la redistributiondu flux de chaleur, notamment à des échelles de temps courtes (≤ 10 Myr). Ces variations rapidesmodifient la distribution latitudinale du flux de chaleur à la CMB. Une analyse en composantesprincipales est effectuée pour obtenir les motifs de flux de chaleur dominant dans les modèles.Dans une deuxième partie, nous étudions l’impact des conditions hétérogènes de flux de chaleurau sommet du noyau dans des modèles de géodynamo qui s’étendent vers des régimes deparamètres plus proches de celui de la Terre que ce qui a été fait précédemment. L’effet de ladistribution du flux de chaleur en latitude est notamment étudié. Des motifs de flux complexes extraitsdes modèles de convection mantellique sont également utilisés. Nous montrons qu’un refroidissementéquatorial du noyau est le plus efficace pour déstabiliser le dipôle magnétique, tandisqu’un refroidissement polaire tend à stabiliser le dipôle. Les effets observés des flux de chaleurhétérogènes s’expliquent par la compatibilité entre les motifs de flux et les écoulements zonaux.Notamment, les motifs de flux de chaleur ont un effet plus modéré lorsque les écoulements zoiinaux vers l’ouest sont forts, avec une déstabilisation du dipôle seulement pour des amplitudesimprobables. Un paramètre contrôlant l’amplitude et la stabilité du dipôle magnétique, cohérentavec l’existence d’inversions magnétiques pour la Terre, est proposé.

The heat flux across the core–mantle boundary (CMB) is a fundamental variable for Earth evolution and internal dynamics. Seismic tomography provides access to seismic heterogeneities in the lower mantle, which can be related to present-day thermal heterogeneities. Alternatively, mantle convection models can be used to either infer past CMB heat flux or to produce statistically realistic CMB heat flux patterns in self-consistent models. Mantle dynamics modifies the inertia tensor of the Earth, which implies a rotation of the Earth with respect to its spin axis, a phenomenon called true polar wander (TPW). This rotation must be taken into account to link the dynamics of the mantle to the dynamics of the core. In this study, we explore the impact of TPW on the CMB heat flux over long timescales (∼1 Gyr) using two recently published mantle convection models: one model driven by a plate reconstruction and a second that self-consistently produces a plate-like behaviour. We compute the geoid in both models to correct for TPW. In the plate-driven model, we compute a total geoid and a geoid in which lateral variations of viscosity and density are suppressed above 350 km depth. An alternative to TPW correction is used for the plate-driven model by simply repositioning the model in the original paleomagnetic reference frame of the plate reconstruction. The average TPW rates range between 0.4 and 1.8° Myr⁻¹, but peaks up to 10° Myr⁻¹ are observed. We find that in the plate-driven mantle convection model used in this study, the maximum inertia axis produced by the model does not show a long-term consistency with the position of the magnetic dipole inferred from paleomagnetism. TPW plays an important role in redistributing the CMB heat flux, notably at short timescales (≤10 Myr). Those rapid variations modify the latitudinal distribution of the CMB heat flux, which is known to affect the stability of the magnetic dipole in geodynamo simulations. A principal component analysis (PCA) is computed to obtain the dominant CMB heat flux pattern in the different cases. These heat flux patterns are representative of the mantle convection cases studied here and can be used as boundary conditions for geodynamo models.

Heat flux across the core-mantle boundary (CMB) is an important variable of Earth's thermal evolution and dynamics. Seismic tomography provides access to seismic heterogeneities in the lower mantle, which can be related to present-day thermal heterogeneities. Alternatively, mantle convection models can be used to either infer past CMB heat flux or to produce statistically realistic CMB heat flux patterns in self-consistent models. Mantle dynamics modifies the inertia tensor of the Earth, which implies a rotation of the Earth with respect to its spin axis, a phenomenon called true polar wander (TPW). This rotation must be taken into account to link the dynamics of the mantle to the dynamics of the core. In this study, we use two recently published mantle convection models to explore the impact of TPW on the CMB heat flux over long timescales (~ 1 Gyr). One of the mantle convection models is driven by a plate reconstruction, while the other self-consistently produces a plate-like behavior. We compute the geoid in both models to correct for TPW. In the plate-driven model, we compute a total geoid and a geoid in which lateral variations of viscosity and temperature are suppressed above 350 km depth. We show that TPW plays an important role in redistributing the CMB heat flux, notably at short time scales (≤ 10 Myr). Those rapid variations modify the latitudinal distribution of the CMB heat flux, which is known to affect the stability of the magnetic dipole in geodynamo simulations. A principal component analysis (PCA) is computed to obtain the dominant CMB heat flux pattern in the different cases. These heat flux patterns can be used as boundary conditions for geodynamo models as representative of the mantle convection cases studied here. We note that the geoids produced by the two models are widely different from each other and from the observed present-day geoid. Work thus still needs to be done to improve the computation of the geoid in mantle convection models related to plate-tectonics.

Heat flux across the core-mantle boundary (CMB) is an important variable of Earth's thermal evolution and dynamics. Seismic tomography provides access to seismic heterogeneities in the lower mantle, which can be related to present-day thermal heterogeneities. Alternatively, mantle convection models can be used to either infer past CMB heat flux or to produce statistically realistic CMB heat flux patterns in self-consistent models. Mantle dynamics modifies the inertia tensor of the Earth, which implies a rotation of the Earth with respect to its spin axis, a phenomenon called true polar wander (TPW). This rotation must be taken into account to link the dynamics of the mantle to the dynamics of the core. In this study, we use two recently published mantle convection models to explore the impact of TPW on the CMB heat flux over long timescales (~ 1 Gyr). One of the mantle convection models is driven by a plate reconstruction, while the other self-consistently produces a plate-like behavior. We compute the geoid in both models to correct for TPW. In the plate-driven model, we compute a total geoid and a geoid in which lateral variations of viscosity and temperature are suppressed above 350 km depth. We show that TPW plays an important role in redistributing the CMB heat flux, notably at short time scales (≤ 10 Myr). Those rapid variations modify the latitudinal distribution of the CMB heat flux, which is known to affect the stability of the magnetic dipole in geodynamo simulations. A principal component analysis (PCA) is computed to obtain the dominant CMB heat flux pattern in the different cases. These heat flux patterns can be used as boundary conditions for geodynamo models as representative of the mantle convection cases studied here. We note that the geoids produced by the two models are widely different from each other and from the observed present-day geoid. Work thus still needs to be done to improve the computation of the geoid in mantle convection models related to plate-tectonics.

Heat flux across the core-mantle boundary (CMB) is an important variable of Earth's thermal evolution and dynamics. Seismic tomography provides access to seismic heterogeneities in the lower mantle, which can be related to present-day thermal heterogeneities. Alternatively, mantle convection models can be used to either infer past CMB heat flux or to produce statistically realistic CMB heat flux patterns in self-consistent models. Mantle dynamics modifies the inertia tensor of the Earth, which implies a rotation of the Earth with respect to its spin axis, a phenomenon called true polar wander (TPW). This rotation must be taken into account to link the dynamics of the mantle to the dynamics of the core. In this study, we use two recently published mantle convection models to explore the impact of TPW on the CMB heat flux over long timescales (~ 1 Gyr). One of the mantle convection models is driven by a plate reconstruction, while the other self-consistently produces a plate-like behavior. We compute the geoid in both models to correct for TPW. In the plate-driven model, we compute a total geoid and a geoid in which lateral variations of viscosity and temperature are suppressed above 350 km depth. We show that TPW plays an important role in redistributing the CMB heat flux, notably at short time scales (≤ 10 Myr). Those rapid variations modify the latitudinal distribution of the CMB heat flux, which is known to affect the stability of the magnetic dipole in geodynamo simulations. A principal component analysis (PCA) is computed to obtain the dominant CMB heat flux pattern in the different cases. These heat flux patterns can be used as boundary conditions for geodynamo models as representative of the mantle convection cases studied here. We note that the geoids produced by the two models are widely different from each other and from the observed present-day geoid. Work thus still needs to be done to improve the computation of the geoid in mantle convection models related to plate-tectonics.

Heat flux across the core-mantle boundary (CMB) is an important variable of Earth's thermal evolution and dynamics. Seismic tomography provides access to seismic heterogeneities in the lower mantle, which can be related to present-day thermal heterogeneities. Alternatively, mantle convection models can be used to either infer past CMB heat flux or to produce statistically realistic CMB heat flux patterns in self-consistent models. Mantle dynamics modifies the inertia tensor of the Earth, which implies a rotation of the Earth with respect to its spin axis, a phenomenon called true polar wander (TPW). This rotation must be taken into account to link the dynamics of the mantle to the dynamics of the core. In this study, we use two recently published mantle convection models to explore the impact of TPW on the CMB heat flux over long timescales (~ 1 Gyr). One of the mantle convection models is driven by a plate reconstruction, while the other self-consistently produces a plate-like behavior. We compute the geoid in both models to correct for TPW. In the plate-driven model, we compute a total geoid and a geoid in which lateral variations of viscosity and temperature are suppressed above 350 km depth. We show that TPW plays an important role in redistributing the CMB heat flux, notably at short time scales (≤ 10 Myr). Those rapid variations modify the latitudinal distribution of the CMB heat flux, which is known to affect the stability of the magnetic dipole in geodynamo simulations. A principal component analysis (PCA) is computed to obtain the dominant CMB heat flux pattern in the different cases. These heat flux patterns can be used as boundary conditions for geodynamo models as representative of the mantle convection cases studied here. We note that the geoids produced by the two models are widely different from each other and from the observed present-day geoid. Work thus still needs to be done to improve the computation of the geoid in mantle convection models related to plate-tectonics.

Heat flux across the core-mantle boundary (CMB) is an important variable of Earth's thermal evolution and dynamics. Seismic tomography provides access to seismic heterogeneities in the lower mantle, which can be related to present-day thermal heterogeneities. Alternatively, mantle convection models can be used to either infer past CMB heat flux or to produce statistically realistic CMB heat flux patterns in self-consistent models. Mantle dynamics modifies the inertia tensor of the Earth, which implies a rotation of the Earth with respect to its spin axis, a phenomenon called true polar wander (TPW). This rotation must be taken into account to link the dynamics of the mantle to the dynamics of the core. In this study, we use two recently published mantle convection models to explore the impact of TPW on the CMB heat flux over long timescales (~ 1 Gyr). One of the mantle convection models is driven by a plate reconstruction, while the other self-consistently produces a plate-like behavior. We compute the geoid in both models to correct for TPW. In the plate-driven model, we compute a total geoid and a geoid in which lateral variations of viscosity and temperature are suppressed above 350 km depth. We show that TPW plays an important role in redistributing the CMB heat flux, notably at short time scales (≤ 10 Myr). Those rapid variations modify the latitudinal distribution of the CMB heat flux, which is known to affect the stability of the magnetic dipole in geodynamo simulations. A principal component analysis (PCA) is computed to obtain the dominant CMB heat flux pattern in the different cases. These heat flux patterns can be used as boundary conditions for geodynamo models as representative of the mantle convection cases studied here. We note that the geoids produced by the two models are widely different from each other and from the observed present-day geoid. Work thus still needs to be done to improve the computation of the geoid in mantle convection models related to plate-tectonics.

Heat flux across the core-mantle boundary (CMB) is an important variable of Earth's thermal evolution and dynamics. Seismic tomography provides access to seismic heterogeneities in the lower mantle, which can be related to present-day thermal heterogeneities. Alternatively, mantle convection models can be used to either infer past CMB heat flux or to produce statistically realistic CMB heat flux patterns in self-consistent models. Mantle dynamics modifies the inertia tensor of the Earth, which implies a rotation of the Earth with respect to its spin axis, a phenomenon called true polar wander (TPW). This rotation must be taken into account to link the dynamics of the mantle to the dynamics of the core. In this study, we use two recently published mantle convection models to explore the impact of TPW on the CMB heat flux over long timescales (~ 1 Gyr). One of the mantle convection models is driven by a plate reconstruction, while the other self-consistently produces a plate-like behavior. We compute the geoid in both models to correct for TPW. In the plate-driven model, we compute a total geoid and a geoid in which lateral variations of viscosity and temperature are suppressed above 350 km depth. We show that TPW plays an important role in redistributing the CMB heat flux, notably at short time scales (≤ 10 Myr). Those rapid variations modify the latitudinal distribution of the CMB heat flux, which is known to affect the stability of the magnetic dipole in geodynamo simulations. A principal component analysis (PCA) is computed to obtain the dominant CMB heat flux pattern in the different cases. These heat flux patterns can be used as boundary conditions for geodynamo models as representative of the mantle convection cases studied here. We note that the geoids produced by the two models are widely different from each other and from the observed present-day geoid. Work thus still needs to be done to improve the computation of the geoid in mantle convection models related to plate-tectonics.