Gianluca Ciarleglio
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gianluca Ciarleglio has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Maria Gabriella Santonicola
Department of Chemical Engineering Materials Environment, Sapienza University of Rome, Via del Castro Laurenziano 7, 00161 Rome, Italy
14 shared publications - Elisa Toto
Department of Chemical Engineering Materials Environment, Sapienza University of Rome, Via del Castro Laurenziano 7, 00161 Rome, Italy
9 shared publications Elisa Toto
5 shared publicationsMaria Gabriella Santonicola
Department of Chemical Engineering Materials Environment, Sapienza University of Rome
4 shared publications- Susanna Laurenzi
Sapienza Aerospace Structures Laboratory, Sapienza University of Rome, Via Salaria 851, 00138 Rome, Italy
3 shared publications - Letizia Pagani
Department of Chemical Engineering Materials Environment SAPIENZA University of Rome Rome Italy
2 shared publications
Latest Publications
- Open Access
Electrospun Polymer Nanofibers for Biomedical Interfaces: Polymer Selection, Architecture, Bioactivation, and Translational Challenges
Electrospun nanofibers provide high surface area, interconnected porosity, and extracellular-matrix-like architectures that can be combined with controlled degradation, local therapeutic delivery, and surface biofunctionalization. This review examines bioactive electrospun materials from a materials-design perspective, focusing on the relationships among polymer selection, electrospinning conditions, fiber architecture, bioactive-agent localization, and application-specific performance. Synthetic biodegradable polymers, natural and bio-derived polymers, and hybrid systems are discussed together with random, aligned, multilayer, and core–shell architectures. Bioactivation strategies include direct incorporation of therapeutic agents or functional nanophases, core–shell localization for payload protection and release control, surface functionalization, endogenous-factor recruitment, and stimulus-responsive activation. Three biomedical interfaces are considered as contrasting application models: wound dressings, urological repair, and implant or biomedical-device coatings. Their comparison highlights distinct requirements related to hydration, mechanical loading, microbial exposure, tissue interaction, coating–substrate integrity, and functional lifetime. Particular attention is given to wet-state stability, preservation of bioactive function, sterilization, manufacturing reproducibility, and validation against application-specific failure modes. Overall, the assessment of electrospun biomedical materials should extend beyond as-fabricated morphology and bioactive-agent incorporation to establish whether structural, interfacial, and biological functions are retained under application-relevant conditions.
Open AccessElectrospun Polymer Nanofibers for Biomedical Interfaces: Polymer Selection, Architecture, Bioactivation, and Translational Challenges
Electrospun nanofibers provide high surface area, interconnected porosity, and extracellular-matrix-like architectures that can be combined with controlled degradation, local therapeutic delivery, and surface biofunctionalization. This review examines bioactive electrospun materials from a materials-design perspective, focusing on the relationships among polymer selection, electrospinning conditions, fiber architecture, bioactive-agent localization, and application-specific performance. Synthetic biodegradable polymers, natural and bio-derived polymers, and hybrid systems are discussed together with random, aligned, multilayer, and core–shell architectures. Bioactivation strategies include direct incorporation of therapeutic agents or functional nanophases, core–shell localization for payload protection and release control, surface functionalization, endogenous-factor recruitment, and stimulus-responsive activation. Three biomedical interfaces are considered as contrasting application models: wound dressings, urological repair, and implant or biomedical-device coatings. Their comparison highlights distinct requirements related to hydration, mechanical loading, microbial exposure, tissue interaction, coating–substrate integrity, and functional lifetime. Particular attention is given to wet-state stability, preservation of bioactive function, sterilization, manufacturing reproducibility, and validation against application-specific failure modes. Overall, the assessment of electrospun biomedical materials should extend beyond as-fabricated morphology and bioactive-agent incorporation to establish whether structural, interfacial, and biological functions are retained under application-relevant conditions.
- Open Access
- 2 October 2026
- Published by Frontiers Media SA in Frontiers in Bioengineering and Biotechnology
- Vol. 14, 1946755
Electrospun poly(vinyl alcohol)/hyaluronic acid nanofiber mats for wound care in space: cytocompatibility and effects of UV-C treatment and simulated microgravity
Electrospun nanofibrous dressings are attractive for wound-care applications in space-related healthcare; however, limited information is available on the stability of UV-C-treated, water-stabilized nanofiber mats after exposure to simulated microgravity and on their cytocompatibility after pre-use treatment. To address this gap, fully aqueous poly(vinyl alcohol) (PVA) and poly (vinyl alcohol)/hyaluronic acid (PVA/HA) electrospun mats were stabilized through citric acid-mediated ester crosslinking and evaluated after UV-C treatment followed by 48 h incubation under static or simulated microgravity conditions. Both x-PVA and x-PVA/HA retained a continuous fibrous architecture without network collapse, although simulated microgravity was associated with formulation-dependent morphological remodeling. x-PVA showed a more pronounced increase in fiber diameter and a coarser network, whereas x-PVA/HA exhibited a more moderate diameter increase while retaining a highly interconnected fibrous organization. Water vapor transmission rates of 2,552.6 ± 66.7 and 2,492.6 ± 21.6 g m −2 day −1 were measured for x-PVA and x-PVA/HA, respectively, indicating substantial vapor transport under the investigated conditions. FTIR-ATR analysis showed preservation of the characteristic bands of the ester-crosslinked PVA-based networks, without evidence of marked chemical degradation. DSC revealed treatment-dependent changes in thermal transitions, whereas simulated microgravity produced no pronounced additional shift compared with the corresponding static controls. In vitro assays performed on UV-C-treated x-PVA/HA supported cytocompatibility across the tested cell models, including human keratinocytes. Overall, citric-acid-crosslinked x-PVA/HA nanofibrous mats combined breathable vapor-regulating behavior with preserved fibrous architecture and physicochemical stability after UV-C treatment and short-term simulated microgravity exposure. Together with the observed in vitro cytocompatibility, these findings support their further investigation as wound-contact materials for space-related healthcare.
- 2 October 2026
- Published by Frontiers Media SA in Frontiers in Bioengineering and Biotechnology
- Vol. 14, 1946755
Open AccessElectrospun poly(vinyl alcohol)/hyaluronic acid nanofiber mats for wound care in space: cytocompatibility and effects of UV-C treatment and simulated microgravity
Electrospun nanofibrous dressings are attractive for wound-care applications in space-related healthcare; however, limited information is available on the stability of UV-C-treated, water-stabilized nanofiber mats after exposure to simulated microgravity and on their cytocompatibility after pre-use treatment. To address this gap, fully aqueous poly(vinyl alcohol) (PVA) and poly (vinyl alcohol)/hyaluronic acid (PVA/HA) electrospun mats were stabilized through citric acid-mediated ester crosslinking and evaluated after UV-C treatment followed by 48 h incubation under static or simulated microgravity conditions. Both x-PVA and x-PVA/HA retained a continuous fibrous architecture without network collapse, although simulated microgravity was associated with formulation-dependent morphological remodeling. x-PVA showed a more pronounced increase in fiber diameter and a coarser network, whereas x-PVA/HA exhibited a more moderate diameter increase while retaining a highly interconnected fibrous organization. Water vapor transmission rates of 2,552.6 ± 66.7 and 2,492.6 ± 21.6 g m −2 day −1 were measured for x-PVA and x-PVA/HA, respectively, indicating substantial vapor transport under the investigated conditions. FTIR-ATR analysis showed preservation of the characteristic bands of the ester-crosslinked PVA-based networks, without evidence of marked chemical degradation. DSC revealed treatment-dependent changes in thermal transitions, whereas simulated microgravity produced no pronounced additional shift compared with the corresponding static controls. In vitro assays performed on UV-C-treated x-PVA/HA supported cytocompatibility across the tested cell models, including human keratinocytes. Overall, citric-acid-crosslinked x-PVA/HA nanofibrous mats combined breathable vapor-regulating behavior with preserved fibrous architecture and physicochemical stability after UV-C treatment and short-term simulated microgravity exposure. Together with the observed in vitro cytocompatibility, these findings support their further investigation as wound-contact materials for space-related healthcare.
- Open Access
- 7 July 2026
- Published by Elsevier in Materials Today Communications
- Vol. 54
Flexible and lead-free X-ray shielding materials made of electrospun poly(vinyl alcohol)/tungsten trioxide nanofibers
- 7 July 2026
- Published by Elsevier in Materials Today Communications
- Vol. 54
Open AccessFlexible and lead-free X-ray shielding materials made of electrospun poly(vinyl alcohol)/tungsten trioxide nanofibers
- Open Access
A Green Binary Solvent System for the PLA Nanofiber Electrospinning Process: Optimization of Parameters
Electrospinning of poly(lactic acid) (PLA) commonly relies on toxic organic solvents, which limit its sustainability and biomedical applicability. In this work, a green electrospinning process was developed using dimethyl carbonate (DMC), a biodegradable and low-toxicity solvent, combined with acetone as a volatile co-solvent to promote efficient jet solidification. Three commercial PLA grades were evaluated for solubility and spinnability, and PLA 4043D was identified as the most suitable for DMC and acetone systems. The electrospinning parameters, including solvent ratio, flow rate, and applied voltage, were systematically optimized to achieve stable jet formation and uniform fiber morphology. Under optimized conditions, the process produced continuous, bead-free nanofibers with a mean diameter of ~1 µm and uniform nanoscale surface porosity resulting from differential solvent evaporation. The resulting fibers were characterized in terms of morphology, structure, thermal behavior, and mechanical performance, confirming increased amorphous content, high porosity (about 78%), and tensile strength of ~3 MPa for the selected electrospinning condition. This study demonstrates that DMC-based solvent systems enable a sustainable and potentially biocompatible route, considering the lower toxicity of the solvents employed, offering a green alternative to conventional toxic processes for the fabrication of medical scaffolds.
Open AccessA Green Binary Solvent System for the PLA Nanofiber Electrospinning Process: Optimization of Parameters
Electrospinning of poly(lactic acid) (PLA) commonly relies on toxic organic solvents, which limit its sustainability and biomedical applicability. In this work, a green electrospinning process was developed using dimethyl carbonate (DMC), a biodegradable and low-toxicity solvent, combined with acetone as a volatile co-solvent to promote efficient jet solidification. Three commercial PLA grades were evaluated for solubility and spinnability, and PLA 4043D was identified as the most suitable for DMC and acetone systems. The electrospinning parameters, including solvent ratio, flow rate, and applied voltage, were systematically optimized to achieve stable jet formation and uniform fiber morphology. Under optimized conditions, the process produced continuous, bead-free nanofibers with a mean diameter of ~1 µm and uniform nanoscale surface porosity resulting from differential solvent evaporation. The resulting fibers were characterized in terms of morphology, structure, thermal behavior, and mechanical performance, confirming increased amorphous content, high porosity (about 78%), and tensile strength of ~3 MPa for the selected electrospinning condition. This study demonstrates that DMC-based solvent systems enable a sustainable and potentially biocompatible route, considering the lower toxicity of the solvents employed, offering a green alternative to conventional toxic processes for the fabrication of medical scaffolds.
- Open Access
Poly(Vinyl Alcohol)/Hyaluronic Acid Nanofibers for Biomedical Use Under Physiological Conditions: Electrospinning Fabrication and Stabilization via Solvent-Free Citric Acid Crosslinking
Electrospun polymeric nanofibers have emerged as promising materials for wound management owing to their high surface area, efficient exudate absorption and gas exchange, and extracellular-matrix-like architecture. This study investigates the fabrication of nanofiber dressings from poly(vinyl alcohol) (PVA) and hyaluronic acid (HA), prepared by fully aqueous electrospinning (without organic solvents) for potential wound-care applications. HA incorporation is expected to influence hydration and matrix interactions, properties that have been associated with modulation of wound healing in previous studies. However, the high solubility of PVA-based NFs in aqueous environments limits their use in biological applications. To address this issue, PVA/HA nanofibers were chemically crosslinked through a solid-state esterification process at 150 °C using biocompatible citric acid (CA). The electrospinning parameters were optimized to obtain PVA/HA fibers with diameters ranging from 130 to 200 nm, which were assembled to form mats with different porosity and intersection density. FTIR confirmed the formation of ester bonds, while DSC analysis showed an increase in Tg from 41 °C to about 55 °C and a slight decrease in Tm after crosslinking. Swelling and degradation analyses demonstrated a significant enhancement in hydrolytic stability, as the weight loss of the nanofiber mats decreased from ~90% in the non-crosslinked samples to less than 10% after 2 h of crosslinking. Dynamic mechanical analysis (DMA) showed an increase in Young’s modulus from ~70 MPa to 230 MPa after crosslinking. Overall, the results demonstrate the stabilizing effect of citric-acid crosslinking on PVA/HA nanofibers and support their potential use in wound dressings under physiological conditions.
Open AccessPoly(Vinyl Alcohol)/Hyaluronic Acid Nanofibers for Biomedical Use Under Physiological Conditions: Electrospinning Fabrication and Stabilization via Solvent-Free Citric Acid Crosslinking
Electrospun polymeric nanofibers have emerged as promising materials for wound management owing to their high surface area, efficient exudate absorption and gas exchange, and extracellular-matrix-like architecture. This study investigates the fabrication of nanofiber dressings from poly(vinyl alcohol) (PVA) and hyaluronic acid (HA), prepared by fully aqueous electrospinning (without organic solvents) for potential wound-care applications. HA incorporation is expected to influence hydration and matrix interactions, properties that have been associated with modulation of wound healing in previous studies. However, the high solubility of PVA-based NFs in aqueous environments limits their use in biological applications. To address this issue, PVA/HA nanofibers were chemically crosslinked through a solid-state esterification process at 150 °C using biocompatible citric acid (CA). The electrospinning parameters were optimized to obtain PVA/HA fibers with diameters ranging from 130 to 200 nm, which were assembled to form mats with different porosity and intersection density. FTIR confirmed the formation of ester bonds, while DSC analysis showed an increase in Tg from 41 °C to about 55 °C and a slight decrease in Tm after crosslinking. Swelling and degradation analyses demonstrated a significant enhancement in hydrolytic stability, as the weight loss of the nanofiber mats decreased from ~90% in the non-crosslinked samples to less than 10% after 2 h of crosslinking. Dynamic mechanical analysis (DMA) showed an increase in Young’s modulus from ~70 MPa to 230 MPa after crosslinking. Overall, the results demonstrate the stabilizing effect of citric-acid crosslinking on PVA/HA nanofibers and support their potential use in wound dressings under physiological conditions.
- Open Access
- 23 November 2025
- Published by Springer Nature in MRS Communications
- Vol. 16 (2) , 498-504
Biocompatible PLA/nHAp coatings for titanium implants fabricated by green electrospinning
Electrospun coatings are emerging as an alternative to conventional titanium-based implant surface modifications. Here, we developed poly (lactic acid) (PLA)/nano-hydroxyapatite (nHAp) nanofibrous coatings deposited on titanium by electrospinning. A dimethyl carbonate/acetone (1:1 ratio) solvent system was adopted as a safer and sustainable alternative to toxic solvents. Scanning electron microscopy showed uniform fibers with diameters below 550 nm and coating thicknesses of 35–45 µm. FTIR spectra confirmed nHAp incorporation through characteristic phosphate bands. In vitro degradation revealed greater weight loss and more pronounced pH reduction for PLA/nHAp coatings. These green-fabricated bioactive coatings represent a promising strategy to enhance titanium implant integration. Graphical abstract
- 23 November 2025
- Published by Springer Nature in MRS Communications
- Vol. 16 (2) , 498-504
Open AccessBiocompatible PLA/nHAp coatings for titanium implants fabricated by green electrospinning
Electrospun coatings are emerging as an alternative to conventional titanium-based implant surface modifications. Here, we developed poly (lactic acid) (PLA)/nano-hydroxyapatite (nHAp) nanofibrous coatings deposited on titanium by electrospinning. A dimethyl carbonate/acetone (1:1 ratio) solvent system was adopted as a safer and sustainable alternative to toxic solvents. Scanning electron microscopy showed uniform fibers with diameters below 550 nm and coating thicknesses of 35–45 µm. FTIR spectra confirmed nHAp incorporation through characteristic phosphate bands. In vitro degradation revealed greater weight loss and more pronounced pH reduction for PLA/nHAp coatings. These green-fabricated bioactive coatings represent a promising strategy to enhance titanium implant integration. Graphical abstract
- Open Access
- 11 November 2025
- Published by Wiley in Macromolecular Symposia
- Vol. 414 (6)
Nanofibrous Coatings of Poly(Lactic Acid) and Nano‐Hydroxyapatite for Enhanced Biocompatibility of Titanium Implants
Electrospun nanofibrous coatings based on poly(lactic acid) (PLA) and bioactive nano‐hydroxyapatite (nHAp) are developed to enhance the biocompatibility and corrosion resistance of titanium implants for medical applications. The electrospinning process parameters are optimized to achieve a uniform morphology of PLA nanofibers and PLA/nHAp composite fibers. The morphology and porosity of the fiber coatings were investigated by scanning electron microscopy. FTIR spectroscopy confirms the successful incorporation of nHAp into the PLA fibers, while electrochemical impedance spectroscopy demonstrates a significant improvement in corrosion resistance for the nanocomposite‐coated titanium. Results show that the PLA/nHAp composite coatings prepared by electrospinning have promising features for applications in orthopedic and dental implantology.
- 11 November 2025
- Published by Wiley in Macromolecular Symposia
- Vol. 414 (6)
Open AccessNanofibrous Coatings of Poly(Lactic Acid) and Nano‐Hydroxyapatite for Enhanced Biocompatibility of Titanium Implants
Electrospun nanofibrous coatings based on poly(lactic acid) (PLA) and bioactive nano‐hydroxyapatite (nHAp) are developed to enhance the biocompatibility and corrosion resistance of titanium implants for medical applications. The electrospinning process parameters are optimized to achieve a uniform morphology of PLA nanofibers and PLA/nHAp composite fibers. The morphology and porosity of the fiber coatings were investigated by scanning electron microscopy. FTIR spectroscopy confirms the successful incorporation of nHAp into the PLA fibers, while electrochemical impedance spectroscopy demonstrates a significant improvement in corrosion resistance for the nanocomposite‐coated titanium. Results show that the PLA/nHAp composite coatings prepared by electrospinning have promising features for applications in orthopedic and dental implantology.
- Open Access
Multilayer pH-Responsive Hydrogels Fabricated via Two-Step Ionic Crosslinking: Towards Advanced Wound Dressing Materials
The design of hydrogel-based materials for wound care management requires the integration of multiple functionalities, including the capacity to maintain hydration, to prevent infection, and to adapt to the dynamic wound microenvironment. In this study, we fabricated innovative pH-reactive multilayer hydrogel patches based on ionically crosslinked alginate and incorporated with bioactive compounds, including Manuka honey, hyaluronic acid, and Ribes nigrum extract. The multilayer structure is coated with chitosan to improve water affinity and pH response. The patches are designed to respond to variable pH conditions typical of wound environments, with potential applicability to burn wounds. The hydrogel materials are characterized in terms of water content, swelling behavior, and water vapor transmission rate (WVTR). The chitosan-coated multilayer hydrogel exhibited high water uptake (swelling ratio up to 22.11 ± 0.25; water content 95.48 ± 0.05%) and controlled WVTR (~3450–3850 g/m2·day−1), while degradation remained below 42% at pH 8 compared to >80% in single layers. Microstructural analysis is performed via optical microscopy to assess the morphology and uniformity of the multilayer system, while chemical characterization is conducted using Fourier-transform infrared (FTIR) spectroscopy. The results highlight the ability of the designed material to respond to pH variations and to accommodate bioactive agents within a structurally stable and hydrated network, suggesting its suitability for future investigations into controlled release applications.
Open AccessMultilayer pH-Responsive Hydrogels Fabricated via Two-Step Ionic Crosslinking: Towards Advanced Wound Dressing Materials
The design of hydrogel-based materials for wound care management requires the integration of multiple functionalities, including the capacity to maintain hydration, to prevent infection, and to adapt to the dynamic wound microenvironment. In this study, we fabricated innovative pH-reactive multilayer hydrogel patches based on ionically crosslinked alginate and incorporated with bioactive compounds, including Manuka honey, hyaluronic acid, and Ribes nigrum extract. The multilayer structure is coated with chitosan to improve water affinity and pH response. The patches are designed to respond to variable pH conditions typical of wound environments, with potential applicability to burn wounds. The hydrogel materials are characterized in terms of water content, swelling behavior, and water vapor transmission rate (WVTR). The chitosan-coated multilayer hydrogel exhibited high water uptake (swelling ratio up to 22.11 ± 0.25; water content 95.48 ± 0.05%) and controlled WVTR (~3450–3850 g/m2·day−1), while degradation remained below 42% at pH 8 compared to >80% in single layers. Microstructural analysis is performed via optical microscopy to assess the morphology and uniformity of the multilayer system, while chemical characterization is conducted using Fourier-transform infrared (FTIR) spectroscopy. The results highlight the ability of the designed material to respond to pH variations and to accommodate bioactive agents within a structurally stable and hydrated network, suggesting its suitability for future investigations into controlled release applications.
- Open Access
- 10 October 2025
- Published by Elsevier in Surfaces and Interfaces
- Vol. 76
Electrospun PLA/nano-hydroxyapatite fiber coatings for improved corrosion protection of titanium implants
- 10 October 2025
- Published by Elsevier in Surfaces and Interfaces
- Vol. 76
Open AccessElectrospun PLA/nano-hydroxyapatite fiber coatings for improved corrosion protection of titanium implants
- Open Access
- 14 January 2025
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 333
Retention and capillary flow dynamics assessment of Fatty Acid Methyl Esters (FAMEs) in Carrara marble
- 14 January 2025
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 333
Open AccessRetention and capillary flow dynamics assessment of Fatty Acid Methyl Esters (FAMEs) in Carrara marble