Ruodong Zhi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Ruodong Zhi has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Gang Lv
Beijing Jiaotong University
9 shared publications - Leilei Cui
School of Electrical Engineering, Beijing Jiaotong University, Beijing, China
8 shared publications - Biao Liu
Beijing Jiaotong University
3 shared publications - Yaqing Liu
Beijing Jiaotong University
3 shared publications - Zhixuan Zhang
Beijing Jiaotong University
3 shared publications - Tong Zhou
Beijing Jiaotong University
2 shared publications
Latest Publications
- 22 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 61 (3) , 1-8
3-D Analytical Model of the End Effect in the Transverse Flux Linear Synchronous Motor for Maglev Vehicle With Pitch Angles
A 3-D analytical model of the linear synchronous motors with transverse flux is presented in this paper. First, the 3-D analytical model of the proposed motor is established by using the equivalent magnetic charge method. Then, the x -component, y -component and z -component flux density are obtained based on the analytical model. Besides, the end flux and end thrust of the motor are calculated combining the complex permeability model. Finally, the analytical model of the end flux density and end force is established on the condition that there is an angle between the stator and rotor. Moreover, the flux density and end force with different pitch angles are obtained. The effectiveness of the proposed analytical model is verified by comparing it with the finite element results.
- 22 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 61 (3) , 1-8
3-D Analytical Model of the End Effect in the Transverse Flux Linear Synchronous Motor for Maglev Vehicle With Pitch Angles
A 3-D analytical model of the linear synchronous motors with transverse flux is presented in this paper. First, the 3-D analytical model of the proposed motor is established by using the equivalent magnetic charge method. Then, the x -component, y -component and z -component flux density are obtained based on the analytical model. Besides, the end flux and end thrust of the motor are calculated combining the complex permeability model. Finally, the analytical model of the end flux density and end force is established on the condition that there is an angle between the stator and rotor. Moreover, the flux density and end force with different pitch angles are obtained. The effectiveness of the proposed analytical model is verified by comparing it with the finite element results.
- 7 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (3) , 6361-6369
Magnetic Field and Force Calculation of Transverse Flux Linear Synchronous Motor With Improved Analysis Model
The transverse flux linear synchronous motors (TFLSMs) has been received great attention and study due to high thrust density, flexible design, and diverse topology, as well as the features of integration with thrust, suspension, and guidance. The slotting of the motor iron core will affect the continuous magnetic field distribution. Moreover, accurately solving the magnetic field at the slot can effectively express the magnetic field and force characteristics. Therefore, an improved analysis model of permeability coefficient is proposed, the permeability distribution of stator and rotor are calculated separately. By introducing modification coefficient, the magnetic field is studied and a comparison is carried out with finite element method (FEM) result. Then, the propulsion force is analyzed and validated by the FEM result considering the armature magnetic field. Finally, the prototype and experiment are conducted and the correctness of the proposed model is verified. The calculation results help to grasp the relationship between motor structure and electromagnetic performance.
- 7 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (3) , 6361-6369
Magnetic Field and Force Calculation of Transverse Flux Linear Synchronous Motor With Improved Analysis Model
The transverse flux linear synchronous motors (TFLSMs) has been received great attention and study due to high thrust density, flexible design, and diverse topology, as well as the features of integration with thrust, suspension, and guidance. The slotting of the motor iron core will affect the continuous magnetic field distribution. Moreover, accurately solving the magnetic field at the slot can effectively express the magnetic field and force characteristics. Therefore, an improved analysis model of permeability coefficient is proposed, the permeability distribution of stator and rotor are calculated separately. By introducing modification coefficient, the magnetic field is studied and a comparison is carried out with finite element method (FEM) result. Then, the propulsion force is analyzed and validated by the FEM result considering the armature magnetic field. Finally, the prototype and experiment are conducted and the correctness of the proposed model is verified. The calculation results help to grasp the relationship between motor structure and electromagnetic performance.
- 9 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 59 (10) , 1-8
Analysis of 3-D Air-Gap Flux Density on Improved Double-Sided Linear Synchronous Motor
The accurate analysis and calculation of the three-dimensional air-gap flux density on double-sided linear synchronous motor is very important. It provides reference for evaluating the pulsation content of three-dimensional electromagnetic force and stability of linear synchronous motor. At the same time, it can also offer further support for the design and optimization in terms of reducing harmonic loss and electromagnetic vibration. Based on the novel magnetomotive force analytical model, the three-dimensional flux density on improved double-sided linear synchronous motor is analyzed and calculated. Firstly, the three-dimensional structure and flux density characteristics are investigated. Secondly, the three-dimensional flux density analytical expressions are derived by novel magnetomotive force model. Finally, the three-dimensional flux density waveform and variation rule under various secondary operating conditions are obtained through the analytical calculation model and finite element model.
- 9 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 59 (10) , 1-8
Analysis of 3-D Air-Gap Flux Density on Improved Double-Sided Linear Synchronous Motor
The accurate analysis and calculation of the three-dimensional air-gap flux density on double-sided linear synchronous motor is very important. It provides reference for evaluating the pulsation content of three-dimensional electromagnetic force and stability of linear synchronous motor. At the same time, it can also offer further support for the design and optimization in terms of reducing harmonic loss and electromagnetic vibration. Based on the novel magnetomotive force analytical model, the three-dimensional flux density on improved double-sided linear synchronous motor is analyzed and calculated. Firstly, the three-dimensional structure and flux density characteristics are investigated. Secondly, the three-dimensional flux density analytical expressions are derived by novel magnetomotive force model. Finally, the three-dimensional flux density waveform and variation rule under various secondary operating conditions are obtained through the analytical calculation model and finite element model.
- 29 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 38 (4) , 2938-2946
Steady-State Analysis and Modeling of a Special Modular Transverse Flux Linear Synchronous Motor
A special transverse flux linear synchronous(TFLS)motor with the advantages of integrated functions and simple modular structure is introduced in this paper, which is especially suitable for high-speed maglev trains. The main purpose of this paper is to establish the mathematical model of the TFLS motor. First, by analyzing the steady-state motion process of the motor, the mathematical model in the stator coordinate system is derived. Second, the mathematical model in the d-q coordinate system is obtained by coordinate transformation. Third, the theoretical analysis and the effectiveness of this model are verified by the finite-element analysis method (FEM). The prototype TFLS motor was fabricated to further verify the above findings.
- 29 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 38 (4) , 2938-2946
Steady-State Analysis and Modeling of a Special Modular Transverse Flux Linear Synchronous Motor
A special transverse flux linear synchronous(TFLS)motor with the advantages of integrated functions and simple modular structure is introduced in this paper, which is especially suitable for high-speed maglev trains. The main purpose of this paper is to establish the mathematical model of the TFLS motor. First, by analyzing the steady-state motion process of the motor, the mathematical model in the stator coordinate system is derived. Second, the mathematical model in the d-q coordinate system is obtained by coordinate transformation. Third, the theoretical analysis and the effectiveness of this model are verified by the finite-element analysis method (FEM). The prototype TFLS motor was fabricated to further verify the above findings.
- 10 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 72 (9) , 11428-11436
Characteristic Analysis of Improved Transverse Flux Linear Synchronous Motor Integrated Propulsion, Levitation and Guidance for Maglev Train
Propulsion, levitation and guidance (PLG) are the major technologies for maglev train. An improved structure of transverse flux linear synchronous motor (TFLSM) is presented in this paper, which can simultaneously realize the PLG functions of the maglev train by only one electromagnetic device. Firstly, the topological structure and the operating principle of the TFLSM are analyzed. Secondly, the three-dimensional (3-D) analytical model of TFLSM is proposed, in which the analytical expressions of inductance and electromagnetic forces are obtained. Finally, the 3-D force characteristics of the TFLSM at different supply current values, different air gap length and transverse offsets are calculated. The theoretical analysis results are compared with the experimental results of the test prototype, which verify the effectiveness and correctness of the analytical method.
- 10 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 72 (9) , 11428-11436
Characteristic Analysis of Improved Transverse Flux Linear Synchronous Motor Integrated Propulsion, Levitation and Guidance for Maglev Train
Propulsion, levitation and guidance (PLG) are the major technologies for maglev train. An improved structure of transverse flux linear synchronous motor (TFLSM) is presented in this paper, which can simultaneously realize the PLG functions of the maglev train by only one electromagnetic device. Firstly, the topological structure and the operating principle of the TFLSM are analyzed. Secondly, the three-dimensional (3-D) analytical model of TFLSM is proposed, in which the analytical expressions of inductance and electromagnetic forces are obtained. Finally, the 3-D force characteristics of the TFLSM at different supply current values, different air gap length and transverse offsets are calculated. The theoretical analysis results are compared with the experimental results of the test prototype, which verify the effectiveness and correctness of the analytical method.
- 6 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (1) , 769-776
Inductance Analysis of Transverse Flux Linear Synchronous Motor for Maglev Trains Considering Three-Dimensional Operating Conditions
Despite the availability of powerful finite element method (FEM) tools, an accurate and fast analysis method is needed in the early design stage to find an initial motor design structure with the expected performance. When it is applied to maglev trains, inductance of the transverse flux linear synchronous motor (TFLSM) is affected by the cogging structure, the change of air gap length and the variation of lateral offset. Therefore, the analytical method of inductance in the TFLSM is different compared to that in the conventional rotating field winding motors. The three-dimensional (3-D) analysis models for obtaining inductance parameters are comprehensively introduced in this paper. The results of the inductance analytical calculation are verified and evaluated in light of the FEM simulation results and the prototype measurements.
- 6 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (1) , 769-776
Inductance Analysis of Transverse Flux Linear Synchronous Motor for Maglev Trains Considering Three-Dimensional Operating Conditions
Despite the availability of powerful finite element method (FEM) tools, an accurate and fast analysis method is needed in the early design stage to find an initial motor design structure with the expected performance. When it is applied to maglev trains, inductance of the transverse flux linear synchronous motor (TFLSM) is affected by the cogging structure, the change of air gap length and the variation of lateral offset. Therefore, the analytical method of inductance in the TFLSM is different compared to that in the conventional rotating field winding motors. The three-dimensional (3-D) analysis models for obtaining inductance parameters are comprehensively introduced in this paper. The results of the inductance analytical calculation are verified and evaluated in light of the FEM simulation results and the prototype measurements.
- 16 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 9 (3) , 4113-4120
Investigation of the Transverse Flux Linear Synchronous Motor Integrated With Propulsion, Levitation and Guidance for the Maglev Train
Conventional electromagnetic suspension (EMS) high-speed trains adopt linear synchronous motors (LSMs) and electromagnets together to provide propulsion, levitation and guidance (PLG) forces. In this paper, a new transverse flux linear synchronous motor (TFLSM) is presented for high-speed maglev trains, which can concurrently provide PLG forces. First, the topology and operating principle of TFLSMs are introduced. Second, the electromagnetic characteristics in the TFLSMs and conventional LSMs applied in high-speed maglev trains under the same dimensional conditions are compared and analyzed using the three-dimensional (3-D) finite element method (FEM). A quantitative comparison of the two motors is carried out to show the feasibility of TFLSMs in maglev transportation system applications. Third, the variations of electromagnetic forces in TFLSM with different mechanical parameters and input currents are calculated and analyzed. Finally, the test platform of the prototype TFLSM is built and experiments are conducted to validate the simulation results. Compared with the conventional LSMs, the levitation force generated by TFLSM is increased by 55% and the propulsion force is increased by 21%.
- 16 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 9 (3) , 4113-4120
Investigation of the Transverse Flux Linear Synchronous Motor Integrated With Propulsion, Levitation and Guidance for the Maglev Train
Conventional electromagnetic suspension (EMS) high-speed trains adopt linear synchronous motors (LSMs) and electromagnets together to provide propulsion, levitation and guidance (PLG) forces. In this paper, a new transverse flux linear synchronous motor (TFLSM) is presented for high-speed maglev trains, which can concurrently provide PLG forces. First, the topology and operating principle of TFLSMs are introduced. Second, the electromagnetic characteristics in the TFLSMs and conventional LSMs applied in high-speed maglev trains under the same dimensional conditions are compared and analyzed using the three-dimensional (3-D) finite element method (FEM). A quantitative comparison of the two motors is carried out to show the feasibility of TFLSMs in maglev transportation system applications. Third, the variations of electromagnetic forces in TFLSM with different mechanical parameters and input currents are calculated and analyzed. Finally, the test platform of the prototype TFLSM is built and experiments are conducted to validate the simulation results. Compared with the conventional LSMs, the levitation force generated by TFLSM is increased by 55% and the propulsion force is increased by 21%.
- 24 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 9 (3) , 4104-4112
Characteristics Analysis of Novel Transverse Flux Linear Synchronous Motor for Maglev Transportation
The Maglev transportation mainly completes the propulsion, levitation and guidance functions, which generally require the application of linear motor. Based on this, a novel transverse flux linear synchronous motor is proposed in this paper which is integrated with propulsion, levitation and guidance. The whole structure and principle of the novel transverse flux linear synchronous motor are discussed. Then, the air gap magnetic flux density is calculated based on the equivalent current layer analysis method, and the propulsion and levitation are calculated with different operating times. Besides, the guidance force is calculated with different transverse displacements by using the Schwarz-Christoffel conformal mapping method. After the simulated of the finite element model, the analytical results of the forces are compared with the finite element method. Finally, all the calculated results of the propulsion, the levitation and the guidance are validated by an experimental prototype, which provide an electromagnetic theory analysis for electromagnetic suspension transportation that integrated with propulsion, levitation and guidance.
- 24 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 9 (3) , 4104-4112
Characteristics Analysis of Novel Transverse Flux Linear Synchronous Motor for Maglev Transportation
The Maglev transportation mainly completes the propulsion, levitation and guidance functions, which generally require the application of linear motor. Based on this, a novel transverse flux linear synchronous motor is proposed in this paper which is integrated with propulsion, levitation and guidance. The whole structure and principle of the novel transverse flux linear synchronous motor are discussed. Then, the air gap magnetic flux density is calculated based on the equivalent current layer analysis method, and the propulsion and levitation are calculated with different operating times. Besides, the guidance force is calculated with different transverse displacements by using the Schwarz-Christoffel conformal mapping method. After the simulated of the finite element model, the analytical results of the forces are compared with the finite element method. Finally, all the calculated results of the propulsion, the levitation and the guidance are validated by an experimental prototype, which provide an electromagnetic theory analysis for electromagnetic suspension transportation that integrated with propulsion, levitation and guidance.
- 13 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 59 (3) , 1-7
Analysis on the Air-Gap Magnetic Flux Density and Propulsion of the TFLSM Considering Cogging Effect
A novel transverse flux linear synchronous motor (TFLSM) is proposed which can realize propulsion, levitation and guidance functions in Maglev train. Considering the cogging effect, a novel analytical method for calculating the air gap magnetic flux density of the TFLSM is proposed. First, the overall configuration and operation principle of the TFLSM are discussed. Secondly, the model of the analytical method is proposed, and the magnetic permeability coefficients of the primary and secondary of the TFLSM are established and calculated, then the air gap magnetic flux density of the primary and the secondary are obtained respectively. Besides, the propulsion force is calculated considering the cogging effect. Finally, the finite element method (FEM) and experimental model of the motor is established, by comparing the propulsion force of the analytical results with the FEM and measurement results, the correctness and effectiveness of the analytical calculation method are verified, which provides a basis for further establishing the real-time motion control model of TFLSM.
- 13 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 59 (3) , 1-7
Analysis on the Air-Gap Magnetic Flux Density and Propulsion of the TFLSM Considering Cogging Effect
A novel transverse flux linear synchronous motor (TFLSM) is proposed which can realize propulsion, levitation and guidance functions in Maglev train. Considering the cogging effect, a novel analytical method for calculating the air gap magnetic flux density of the TFLSM is proposed. First, the overall configuration and operation principle of the TFLSM are discussed. Secondly, the model of the analytical method is proposed, and the magnetic permeability coefficients of the primary and secondary of the TFLSM are established and calculated, then the air gap magnetic flux density of the primary and the secondary are obtained respectively. Besides, the propulsion force is calculated considering the cogging effect. Finally, the finite element method (FEM) and experimental model of the motor is established, by comparing the propulsion force of the analytical results with the FEM and measurement results, the correctness and effectiveness of the analytical calculation method are verified, which provides a basis for further establishing the real-time motion control model of TFLSM.