Audrey Zahra
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Audrey Zahra has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
Soo-Jeong Shin
5 shared publications- Soo-Jeong Shin
Chungbuk National University
3 shared publications Jong-Moon Park
2 shared publicationsDa-Young Lim
1 shared publicationGae-Won Nam
1 shared publicationHyeon-A Seong
1 shared publication
Latest Publications
- Open Access
Impact of TEMPO-Oxidation Pretreatment of Red Ginseng Residual on Nanofibrillation
Red ginseng extract is one of the most widely used herbal medicines to prevent and cure various diseases. Among the processed products derived from red ginseng, the water-insoluble part as red ginseng residual (RGR) becomes waste, even though it contains important ingredients. TEMPO-oxidation (TO) can be used as a pre-treatment with different degrees of oxidation (DO) (0 to 0.4) in red ginseng residual (RGR-TO) by introducing chemical oxidation and high-pressure homogenizer (HPH) as a nanofibrillation process. 1H NMR was used to determine the carbohydrate composition and calculate DO, size was examined using a nanoparticle analyzer, and the zeta potential was used to determine surface charge density. RGR-TO with different concentrations had different compositions; glucose and uronic acid were the main ingredients. All treated RGR-TO showed higher oxidant levels than the untreated counterpart (RGR-TO 0). As the oxidant levels increased, the zeta potential and uronic acid increased, but the size of the nanofibril from RGR-TO decreased. The results of this study showed that TEMPO-oxidation pretreatment was effective in producing RGR cellulose nanofibril (CNF) with a variety of properties by adjusting the level of oxidation pretreatment and the number of HPH passes.
Open AccessImpact of TEMPO-Oxidation Pretreatment of Red Ginseng Residual on Nanofibrillation
Red ginseng extract is one of the most widely used herbal medicines to prevent and cure various diseases. Among the processed products derived from red ginseng, the water-insoluble part as red ginseng residual (RGR) becomes waste, even though it contains important ingredients. TEMPO-oxidation (TO) can be used as a pre-treatment with different degrees of oxidation (DO) (0 to 0.4) in red ginseng residual (RGR-TO) by introducing chemical oxidation and high-pressure homogenizer (HPH) as a nanofibrillation process. 1H NMR was used to determine the carbohydrate composition and calculate DO, size was examined using a nanoparticle analyzer, and the zeta potential was used to determine surface charge density. RGR-TO with different concentrations had different compositions; glucose and uronic acid were the main ingredients. All treated RGR-TO showed higher oxidant levels than the untreated counterpart (RGR-TO 0). As the oxidant levels increased, the zeta potential and uronic acid increased, but the size of the nanofibril from RGR-TO decreased. The results of this study showed that TEMPO-oxidation pretreatment was effective in producing RGR cellulose nanofibril (CNF) with a variety of properties by adjusting the level of oxidation pretreatment and the number of HPH passes.
- Open Access
- 22 January 2024
- Published by MDPI AG in Polysaccharides
- Vol. 5 (1) , 16-27
Characterization of Lignocellulose Nanofibril from Desilicated Rice Hull with Carboxymethylation Pretreatment
Rice hulls have a high-value potential, and the lignocellulose components are underutilized compared to other biomass resources. Pretreatments such as carboxymethylation of the degree of substitutions (DS) are used to prepare lignocellulose nanofibril (LCNF) from desilicated rice hull (DSRH). High-pressure homogenization (HPH) and grinding are used to process nano fibrillation. The composition of LCNF DS of desilicated rice hull was identified using 1H NMR for polysaccharide composition and DS determination, acetone and hot water extraction to evaluate extractives, and Klason lignin for lignin content. LCNF was prepared using various DS from 0.2 until DS 0.4. The results showed that LCNF DS has a more than −30 mV zeta potential, suitable for stable nanoemulsion formulations. The particle size of LCNF DS decreases with an increasing carboxyl content in the hydrogel and an increasing number of passes through grinding and high-pressure homogenization, of which LCNF DS 0.4 had the smallest width and length. Mechanical processes further reduced the size.
- 22 January 2024
- Published by MDPI AG in Polysaccharides
- Vol. 5 (1) , 16-27
Open AccessCharacterization of Lignocellulose Nanofibril from Desilicated Rice Hull with Carboxymethylation Pretreatment
Rice hulls have a high-value potential, and the lignocellulose components are underutilized compared to other biomass resources. Pretreatments such as carboxymethylation of the degree of substitutions (DS) are used to prepare lignocellulose nanofibril (LCNF) from desilicated rice hull (DSRH). High-pressure homogenization (HPH) and grinding are used to process nano fibrillation. The composition of LCNF DS of desilicated rice hull was identified using 1H NMR for polysaccharide composition and DS determination, acetone and hot water extraction to evaluate extractives, and Klason lignin for lignin content. LCNF was prepared using various DS from 0.2 until DS 0.4. The results showed that LCNF DS has a more than −30 mV zeta potential, suitable for stable nanoemulsion formulations. The particle size of LCNF DS decreases with an increasing carboxyl content in the hydrogel and an increasing number of passes through grinding and high-pressure homogenization, of which LCNF DS 0.4 had the smallest width and length. Mechanical processes further reduced the size.
- Open Access
- 14 December 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (24) , 12871
Properties of Green Tea Waste as Cosmetics Ingredients and Rheology Enhancers
Green tea waste (GTW) is a naturally abundant material, and it has not been widely reused into more valuable materials. The composition of GTW was identified using NMR for carbohydrate composition, an element analyzer for protein content, acetone and hot water extraction for evaluating extractives, and Klason lignin for lignin content. GTW can be converted into nanoparticles by carboxymethylation as pretreatment of the degree of substitutions (DS) and high-pressure homogenizer for nanoparticle making. GTW was prepared using various DS 0 until DS 0.4. The results showed that GTW DS has a more than −30 mV zeta potential, suitable for stable nanoemulsion formulations. The particle size of GTW DS decreases with increasing carboxyl content in the hydrogel, which has a width and length from GTW DS 0.3 to DS 0.4. As a humectant, the water retention value (WRV) of GTW with various DS was increased; DS 0.3 is the best. DS 0.4 has the highest viscosity, storage, and loss modulus as rheology modifiers.
- 14 December 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (24) , 12871
Open AccessProperties of Green Tea Waste as Cosmetics Ingredients and Rheology Enhancers
Green tea waste (GTW) is a naturally abundant material, and it has not been widely reused into more valuable materials. The composition of GTW was identified using NMR for carbohydrate composition, an element analyzer for protein content, acetone and hot water extraction for evaluating extractives, and Klason lignin for lignin content. GTW can be converted into nanoparticles by carboxymethylation as pretreatment of the degree of substitutions (DS) and high-pressure homogenizer for nanoparticle making. GTW was prepared using various DS 0 until DS 0.4. The results showed that GTW DS has a more than −30 mV zeta potential, suitable for stable nanoemulsion formulations. The particle size of GTW DS decreases with increasing carboxyl content in the hydrogel, which has a width and length from GTW DS 0.3 to DS 0.4. As a humectant, the water retention value (WRV) of GTW with various DS was increased; DS 0.3 is the best. DS 0.4 has the highest viscosity, storage, and loss modulus as rheology modifiers.
- 30 June 2022
- Published by Korea Technical Association of the Pulp and Paper Industry in Journal of Korea Technical Association of The Pulp and Paper Industry
- Vol. 54 (3) , 5-11
Apple nanofiber from apple-waste powder prepared by carboxymethylation and high-pressure homogenization
Apple powder residue obtained after a beverage-making process was evaluated to determine if it is suitable for making nanofibers by the carboxymethylation substitution reaction as pretreatment and high-pressure homogenization for nanofibrillation with three different cultivars. The sugar compositions of the three cultivars (Arisu, Busa, and Gamhong) were similar, but the uronic acid content (glucuronic acid, galacturonic acid) was lower and glucose content higher in the Gamhong cultivar than in the other cultivars. This characteristic resulted in a lower negative zeta potential of the Gamhong cultivar than of the other cultivars. In nanoparticle size analysis, the nanofiber width was 55.4-56.9 ㎚ for the Arisu and Busa cultivars, which was smaller than the nanofiber width of 84.3-84.4 ㎚ of the Gamhong cultivar for a 0.4 degree of substitution carboxymethylated apple nanofiber.
- 30 June 2022
- Published by Korea Technical Association of the Pulp and Paper Industry in Journal of Korea Technical Association of The Pulp and Paper Industry
- Vol. 54 (3) , 5-11
Apple nanofiber from apple-waste powder prepared by carboxymethylation and high-pressure homogenization
Apple powder residue obtained after a beverage-making process was evaluated to determine if it is suitable for making nanofibers by the carboxymethylation substitution reaction as pretreatment and high-pressure homogenization for nanofibrillation with three different cultivars. The sugar compositions of the three cultivars (Arisu, Busa, and Gamhong) were similar, but the uronic acid content (glucuronic acid, galacturonic acid) was lower and glucose content higher in the Gamhong cultivar than in the other cultivars. This characteristic resulted in a lower negative zeta potential of the Gamhong cultivar than of the other cultivars. In nanoparticle size analysis, the nanofiber width was 55.4-56.9 ㎚ for the Arisu and Busa cultivars, which was smaller than the nanofiber width of 84.3-84.4 ㎚ of the Gamhong cultivar for a 0.4 degree of substitution carboxymethylated apple nanofiber.
- 30 June 2022
- Published by Korea Technical Association of the Pulp and Paper Industry in Journal of Korea Technical Association of The Pulp and Paper Industry
- Vol. 54 (3) , 63-72
Impact of Carboxymethylation Pretreatment on the Rheology of Cellulose Nanofiber from Bleached Rice Hull
Rice is widely produced; however, large quantities of non-edible biomass are also generated during its production, mainly straw and hulls. These lignocellulosic materials have great value potential but are less used than other biomass resources. We produced cellulose nanofiber (CNF) from rice husks through delignification (as chlorine dioxide bleaching), pretreatment (as carboxymethylation substitution reaction), and nanofiber-making processes (as supermass-collider grinding and high-pressure homogenization). The rheological properties of rice-hull cellulose nanofiber were investigated to determine the relationship between carboxyl content, number of grinding, and high-pressure homogenization to rheological properties of rice-husk CNF gels. Increased carboxymethylation and mechanical treatments lead to higher viscosity, better hydrogel strength, and water retention value (WRV). Further mechanical processes decreased the viscosity and hydrogel strength after attaining the maximum value. For high-quality hydrogel production, optimum pretreatment and mechanical processes are required as pretreatment to DS 0.3 for carboxymethylation and optimum grinding and high-pressure homogenization combination.
- 30 June 2022
- Published by Korea Technical Association of the Pulp and Paper Industry in Journal of Korea Technical Association of The Pulp and Paper Industry
- Vol. 54 (3) , 63-72
Impact of Carboxymethylation Pretreatment on the Rheology of Cellulose Nanofiber from Bleached Rice Hull
Rice is widely produced; however, large quantities of non-edible biomass are also generated during its production, mainly straw and hulls. These lignocellulosic materials have great value potential but are less used than other biomass resources. We produced cellulose nanofiber (CNF) from rice husks through delignification (as chlorine dioxide bleaching), pretreatment (as carboxymethylation substitution reaction), and nanofiber-making processes (as supermass-collider grinding and high-pressure homogenization). The rheological properties of rice-hull cellulose nanofiber were investigated to determine the relationship between carboxyl content, number of grinding, and high-pressure homogenization to rheological properties of rice-husk CNF gels. Increased carboxymethylation and mechanical treatments lead to higher viscosity, better hydrogel strength, and water retention value (WRV). Further mechanical processes decreased the viscosity and hydrogel strength after attaining the maximum value. For high-quality hydrogel production, optimum pretreatment and mechanical processes are required as pretreatment to DS 0.3 for carboxymethylation and optimum grinding and high-pressure homogenization combination.
- 30 December 2021
- Published by Korea Technical Association of the Pulp and Paper Industry in Journal of Korea Technical Association of The Pulp and Paper Industry
- Vol. 53 (6) , 5-11
Effect of Cellulose-Nanofiber-Controlled Emulsion Size on Skin Delivery by Essence
Cellulose nanofibers were added to microemulsion and nanoemulsion to evaluate their effect on human skin delivery. A decrease in the size of the emulsion during the nanoemulsification using a high-pressure homogenizer, as well as the addition of cellulose nanofibers, increased the efficiency of skin delivery. Following the addition of the cellulose nanofibers, the nanoemulsification treatment using the high-pressure homogenizer was confirmed as the most effective for skin delivery. Because a cosmetic essence undiluted solution that adjusts the size of the emulsion by adding cellulose nanofiber, as a result of a skin clinical test, the product treated with a high-pressure homogenizer (SA2) and cellulose nanofiber were added than the product made with an emulsion using a conventional homomixer (SA1). In products SA3 and SA4, which was treated with the high-pressure homogenizer, following the addition of the cellulose nanofibers, the amount of skin moisture was significantly effective.
- 30 December 2021
- Published by Korea Technical Association of the Pulp and Paper Industry in Journal of Korea Technical Association of The Pulp and Paper Industry
- Vol. 53 (6) , 5-11
Effect of Cellulose-Nanofiber-Controlled Emulsion Size on Skin Delivery by Essence
Cellulose nanofibers were added to microemulsion and nanoemulsion to evaluate their effect on human skin delivery. A decrease in the size of the emulsion during the nanoemulsification using a high-pressure homogenizer, as well as the addition of cellulose nanofibers, increased the efficiency of skin delivery. Following the addition of the cellulose nanofibers, the nanoemulsification treatment using the high-pressure homogenizer was confirmed as the most effective for skin delivery. Because a cosmetic essence undiluted solution that adjusts the size of the emulsion by adding cellulose nanofiber, as a result of a skin clinical test, the product treated with a high-pressure homogenizer (SA2) and cellulose nanofiber were added than the product made with an emulsion using a conventional homomixer (SA1). In products SA3 and SA4, which was treated with the high-pressure homogenizer, following the addition of the cellulose nanofibers, the amount of skin moisture was significantly effective.
- 30 October 2021
- Published by Korea Technical Association of the Pulp and Paper Industry in Journal of Korea Technical Association of The Pulp and Paper Industry
- Vol. 53 (5) , 28-34
Separation of Cellulose from Rice Hull
Rice hull was proposed as an alternative raw material for cellulose production. Rice hull has cellulose (38.6+/-0.1%), xylan (12.8+/-0.1%), lignin (22.7+/-0.7%), extractives (7.9+/-0.4%), and inorganic (13.2+/-0.8%).Inorganic was selectively removed using moderate alkaline extraction, and lignin was degraded via oxidation with chlorine dioxide or hypochlorite. In this study, dilute acid hydrolysis was used to selectively remove hemicellulose, resulting in purer cellulose and better yield. Xylan was selectively removed using sulfuric acid at various acid concentrations (0.25–1 N), reaction time (60–120 min), and temperature (100–120°C) with desilicated and delignified biomass. The reaction conditions for >90% cellulose purity were 120°C and 1.0 N sulfuric acids. Increasing the reaction duration resulted in higher cellulose purity, with the greatest purity being 96.1% at 1.00 N sulfuric acid, 120°C, and 120-min reaction time.
- 30 October 2021
- Published by Korea Technical Association of the Pulp and Paper Industry in Journal of Korea Technical Association of The Pulp and Paper Industry
- Vol. 53 (5) , 28-34
Separation of Cellulose from Rice Hull
Rice hull was proposed as an alternative raw material for cellulose production. Rice hull has cellulose (38.6+/-0.1%), xylan (12.8+/-0.1%), lignin (22.7+/-0.7%), extractives (7.9+/-0.4%), and inorganic (13.2+/-0.8%).Inorganic was selectively removed using moderate alkaline extraction, and lignin was degraded via oxidation with chlorine dioxide or hypochlorite. In this study, dilute acid hydrolysis was used to selectively remove hemicellulose, resulting in purer cellulose and better yield. Xylan was selectively removed using sulfuric acid at various acid concentrations (0.25–1 N), reaction time (60–120 min), and temperature (100–120°C) with desilicated and delignified biomass. The reaction conditions for >90% cellulose purity were 120°C and 1.0 N sulfuric acids. Increasing the reaction duration resulted in higher cellulose purity, with the greatest purity being 96.1% at 1.00 N sulfuric acid, 120°C, and 120-min reaction time.
- 30 October 2021
- Published by Korea Technical Association of the Pulp and Paper Industry in Journal of Korea Technical Association of The Pulp and Paper Industry
- Vol. 53 (5) , 65-73
Dilute Acid Hydrolysis of Jute Bast Fiber for Selected Xylan Removal
Jute fiber was proposed as an alternative raw material for dissolving pulp production. Jute fiber had cellulose (71.8%±0.1%), xylan (10.8%±0.1%), lignin (13.7%±0.2%), and extractives (3.8%±0.0%). In this study, jute fiber was hydrolyzed with H₂SO₄ to remove xylan. To achieve the best conditions for removing hemicellulose and obtaining a high cellulose content, acid hydrolysis pretreatment was performed at various acid concentrations (0.25-1 N), reaction times (60-120 min), and temperatures (100°C-120°C). The results showed that the optimum condition of acid hydrolysis for higher dissolving pulp raw material yield within less than 5.0% xylan was cellulose (60.5±0.2) and xylan (2.9±0.2) at 1 N H₂SO₄, 100°C for 90 min. However, by increasing the reaction temperature to 120°C for 120 min, the chemical used was reduced to 0.25 N H₂SO₄ and the highest purity of cellulose was produced, with cellulose and xylan content of 56.1%±0.1% and 1.3%±0.1%, respectively.
- 30 October 2021
- Published by Korea Technical Association of the Pulp and Paper Industry in Journal of Korea Technical Association of The Pulp and Paper Industry
- Vol. 53 (5) , 65-73
Dilute Acid Hydrolysis of Jute Bast Fiber for Selected Xylan Removal
Jute fiber was proposed as an alternative raw material for dissolving pulp production. Jute fiber had cellulose (71.8%±0.1%), xylan (10.8%±0.1%), lignin (13.7%±0.2%), and extractives (3.8%±0.0%). In this study, jute fiber was hydrolyzed with H₂SO₄ to remove xylan. To achieve the best conditions for removing hemicellulose and obtaining a high cellulose content, acid hydrolysis pretreatment was performed at various acid concentrations (0.25-1 N), reaction times (60-120 min), and temperatures (100°C-120°C). The results showed that the optimum condition of acid hydrolysis for higher dissolving pulp raw material yield within less than 5.0% xylan was cellulose (60.5±0.2) and xylan (2.9±0.2) at 1 N H₂SO₄, 100°C for 90 min. However, by increasing the reaction temperature to 120°C for 120 min, the chemical used was reduced to 0.25 N H₂SO₄ and the highest purity of cellulose was produced, with cellulose and xylan content of 56.1%±0.1% and 1.3%±0.1%, respectively.