HOHaoyu Ou

Haoyu Ou

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Haoyu Ou has a total of 4 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Investigation on High-Viscosity Chemical Waste Liquid Atomizer Based on VOF-DPM

    by Haoyu Ou, Lei Su, Yang Shi, Shijie Ruan

    The viscosity of adiponitrile waste liquid is as high as 1000 cp. It is challenging to spray and atomize the waste liquid normally. Based on the coaxial three-channel pneumatic atomizer, a two-stage supersonic steam atomizer is proposed in this paper, and the atomization process is simulated by Fluent software. Compared with the traditional atomization simulation method, the Volume-of-Fluid to Discrete-Phase-Model (VOF-DPM) bi-directional coupling model and Adaptive Mesh Refinement (AMR) technology can save mesh and improve the computational efficiency. The atomization processes of primary breakup and secondary breakup are entirely captured and analyzed. The results show that the Sauter Mean Diameter (SMD) is about 116–180 μm, the SMD decreases with the increase of steam inlet absolute pressure, and the atomization quality can meet the combustion requirements. This study can be used for the performance optimization of the high-viscosity liquid atomizers in the chemical and aerospace industry and shorten the time engineers spend in the simulation calculation to verify the rationality of the structure.


  • Open Access

    Study on Heat Transfer Characteristics and Performance of the Full Premixed Cauldron Stove with Porous Media

    by Dingming Zheng, Lei Su, Haoyu Ou, Shijie Ruan

    The cauldron stoves used in restaurants and canteens usually adopt the combustion mode of blast diffusion. Low combustion efficiency leads to low thermal efficiency and high CO and NOx emissions. To address these problems, a 52 kW fully premixed stove with porous media is designed, and the heat transfer characteristics of the stove are analyzed by theoretical analysis and numerical simulation. The results show that under the rated power, the thermal efficiency of the stove reaches 68.55%, which is more than twice the thermal efficiency of the traditional blast diffusion stove. Among them, the radiant heat efficiency of the stove reaches 47.16%; thus, radiation heat transfer has become an important way of heat transfer of the porous media stove. Moreover, increasing the diameter and emissivity of porous media will increase the radiant thermal efficiency of the stove, but it will significantly reduce the flame temperature. In addition, the influence of the diameter is greater than the emissivity. The increase of the thickness of porous media can significantly improve the preheating temperature of the premixed gas, thus improving the ignition performance of the stove. Additionally, the stove has an appropriate thickness (approximately 3 mm), which not only ensures the preheating temperature but also does not easily allow for breakage and damage of porous media. Increasing the pore density or reducing the porosity of porous media can enhance the ignition performance of the stove. Moreover, the results of numerical simulation verify the theoretical results to a certain extent and shows that there is an optimal flue position as well.