Kangneoung Lee
Kangneoung Lee has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Kiju Lee
Department of Engineering Technology and Industrial Distribution, Texas A&M University, College Station, TX 77840, USA
2 shared publications - Chuanqi Zheng
Department of Mechanical Engineering, Texas A&M University, College Station, USA
1 shared publication - Heon Kang
Department of Chemistry Seoul National University Seoul South Korea
1 shared publication Hyunjong Ha
School of Mechanical Engineering, Sungkyunkwan University, Suwon-si, Republic of Korea
1 shared publication- Hyunsoo Kim
School of Mechanical Engineering, Sungkyunkwan University, Suwon-si 16419, Korea
1 shared publication - Sangah Ahn
Department of Digital Health, Samsung Advanced Institute for Health Sciences & Technology (SAIHST), Sungkyunkwan University, Seoul 06355, Republic of Korea
1 shared publication
Latest Publications
- Open Access
- 8 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 5503-5516
Adaptive Centroidal Voronoi Tessellation With Agent Dropout and Reinsertion for Multi-Agent Non-Convex Area Coverage
Voronoi diagrams are widely used for area partitioning and coverage control. Nevertheless, their utilization in non-convex domains often necessitates additional computational procedures, such as diffeomorphism application, geodesic distance calculations, or the integration of local markers. Extending these techniques across diverse non-convex domains proves challenging. This paper introduces the adaptive centroidal Voronoi tessellation ($\alpha $ CVT) algorithm, which combines iterative centroidal Voronoi tessellation ($i$ CVT) with an innovative agent dropout and reinsertion strategy. This integration aims to enhance area coverage control in non-convex domains while maintaining adaptability across varied environments without the need for complex computational processes. The efficacy of this approach is validated through simulations involving non-convex domains with disjoint target areas, obstacles, and shape constraints for both homogeneous and heterogeneous agents. Additionally, the$\alpha $ CVT algorithm is extended for real-time coverage control scenarios. Performance metrics are employed to assess the distribution of partitioned Voronoi regions and the overall coverage of the target areas. Results demonstrate improved performance compared to methods that do not incorporate the agent dropout and reinsertion strategy.- 8 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 5503-5516
Open AccessAdaptive Centroidal Voronoi Tessellation With Agent Dropout and Reinsertion for Multi-Agent Non-Convex Area Coverage
Voronoi diagrams are widely used for area partitioning and coverage control. Nevertheless, their utilization in non-convex domains often necessitates additional computational procedures, such as diffeomorphism application, geodesic distance calculations, or the integration of local markers. Extending these techniques across diverse non-convex domains proves challenging. This paper introduces the adaptive centroidal Voronoi tessellation ($\alpha $ CVT) algorithm, which combines iterative centroidal Voronoi tessellation ($i$ CVT) with an innovative agent dropout and reinsertion strategy. This integration aims to enhance area coverage control in non-convex domains while maintaining adaptability across varied environments without the need for complex computational processes. The efficacy of this approach is validated through simulations involving non-convex domains with disjoint target areas, obstacles, and shape constraints for both homogeneous and heterogeneous agents. Additionally, the$\alpha $ CVT algorithm is extended for real-time coverage control scenarios. Performance metrics are employed to assess the distribution of partitioned Voronoi regions and the overall coverage of the target areas. Results demonstrate improved performance compared to methods that do not incorporate the agent dropout and reinsertion strategy. - Open Access
- 14 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 39 (2) , 941-958
$\mathbf{\alpha }$-WaLTR: Adaptive Wheel-and-Leg Transformable Robot for Versatile Multiterrain Locomotion
Adaptability is a fundamental yet challenging requirement for mobile robot locomotion. This article presents $\alpha$ -WaLTR, a new adaptive wheel-and-leg transformable robot for versatile multiterrain mobility. The robot has four passively transformable wheels, where each wheel consists of a central gear and multiple leg segments with embedded spring suspension for vibration reduction. These wheels enable the robot to traverse various terrains, obstacles, and stairs while retaining the simplicity in primary control and operation principles of conventional wheeled robots. The chassis dimensions and the center of gravity location were determined by a multiobjective design optimization process aimed at minimizing the weight and maximizing the robot's pitch angle for obstacle climbing. Unity-based simulations guided the selection of the design variables associated with the transformable wheels. Following the design process, $\alpha$ -WaLTR with an embedded sensing and control system was developed. Experiments showed that the spring suspension on the wheels effectively reduced the vibrations when operated in the legged mode and verified that the robot's versatile locomotion capabilities were highly consistent with the simulations. The system-level integration with an embedded control system was demonstrated via autonomous stair detection, navigation, and climbing capabilities.
- 14 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 39 (2) , 941-958
Open Access$\mathbf{\alpha }$-WaLTR: Adaptive Wheel-and-Leg Transformable Robot for Versatile Multiterrain Locomotion
Adaptability is a fundamental yet challenging requirement for mobile robot locomotion. This article presents $\alpha$ -WaLTR, a new adaptive wheel-and-leg transformable robot for versatile multiterrain mobility. The robot has four passively transformable wheels, where each wheel consists of a central gear and multiple leg segments with embedded spring suspension for vibration reduction. These wheels enable the robot to traverse various terrains, obstacles, and stairs while retaining the simplicity in primary control and operation principles of conventional wheeled robots. The chassis dimensions and the center of gravity location were determined by a multiobjective design optimization process aimed at minimizing the weight and maximizing the robot's pitch angle for obstacle climbing. Unity-based simulations guided the selection of the design variables associated with the transformable wheels. Following the design process, $\alpha$ -WaLTR with an embedded sensing and control system was developed. Experiments showed that the spring suspension on the wheels effectively reduced the vibrations when operated in the legged mode and verified that the robot's versatile locomotion capabilities were highly consistent with the simulations. The system-level integration with an embedded control system was demonstrated via autonomous stair detection, navigation, and climbing capabilities.
- Open Access
- 9 May 2018
- Published by SAGE Publications in Advances in Mechanical Engineering
- Vol. 10 (5)
Development of a pressure control algorithm without a pressure sensor for a four-wheel drive unit
This article proposes a pressure control algorithm without a pressure sensor for a four-wheel-drive unit. To develop the control algorithm, dynamic models of the four-wheel-drive unit were obtained, including the motor, pump, and clutch. For feedback control, a first-order adaptive transfer function of the modified motor speed was proposed to fulfill the transient response characteristics, and the motor input voltage generated the demanded pressure at steady state in the feedforward control. The coefficient of the adaptive transfer function was obtained with weight factors and considering the pressure difference and temperature. The performance of the proposed pressure control algorithm without a pressure sensor was evaluated by experiments at various operating temperatures. It was found that the actual pressure closely followed the demanded pressure with an acceptable error at steady state and within an acceptable rising time in a transient state.- 9 May 2018
- Published by SAGE Publications in Advances in Mechanical Engineering
- Vol. 10 (5)
Open AccessDevelopment of a pressure control algorithm without a pressure sensor for a four-wheel drive unit
This article proposes a pressure control algorithm without a pressure sensor for a four-wheel-drive unit. To develop the control algorithm, dynamic models of the four-wheel-drive unit were obtained, including the motor, pump, and clutch. For feedback control, a first-order adaptive transfer function of the modified motor speed was proposed to fulfill the transient response characteristics, and the motor input voltage generated the demanded pressure at steady state in the feedforward control. The coefficient of the adaptive transfer function was obtained with weight factors and considering the pressure difference and temperature. The performance of the proposed pressure control algorithm without a pressure sensor was evaluated by experiments at various operating temperatures. It was found that the actual pressure closely followed the demanded pressure with an acceptable error at steady state and within an acceptable rising time in a transient state.