SSSarot Srang

Sarot Srang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sarot Srang has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    PI Backstepping Control of a Surface-Mounted Permanent Magnet Synchronous Motors

    by Sros Nhek, Sarot Srang, Channareth Srun, Chivon Choeung, Horchhong Cheng

    Backstepping control is a systematic technique for stabilizing nonlinear systems, particularly Permanent Magnet Synchronous Motors (PMSMs), by addressing their coupled electrical and mechanical dynamics. This Lyapunov-based approach allows for the design of control laws in a step-by-step manner, enhancing stability and performance under uncertainties. This paper presents a comprehensive evaluation of the PI Backstepping (PI-BS) Controller for speed regulation of PMSMs, showing significant improvements in dynamic performance, stability, and disturbance rejection compared to the Gain-Scheduled PI (GSPI) Controller. The control design focuses on rotor speed regulation through q-axis current, ensuring global asymptotic stability via Lyapunov criteria. Simulation results demonstrate the PI-BS controller's superior performance: during a step change from 0.2 PU to 0.9 PU, it achieves a rise time of 19.26ms and minimal overshoot of 0.50%, outperforming the GSPI controller's 22.83ms rise time and 1.53% overshoot. Under nonlinear load disturbances at 1.0 second, the PI-BS controller recovers faster with fewer oscillations, and in a speed reversal from 0.9 PU to -0.8 PU, it outperforms the GSPI controller with a fall time of 17.92ms and an overshoot of 0.50%. By decoupling the electrical and mechanical subsystems, the PI-BS controller offers precise speed and torque regulation under varying conditions. Its Lyapunov-based stability analysis ensures global asymptotic stability, enhancing robustness against disturbances and parameter variations. The controller’s faster response times, reduced overshoot, and improved disturbance rejection make it a highly reliable solution for high-performance motor control, particularly in industrial and automotive applications.


  • Open Access

    Simulation and Modeling of Position Control for an X-Configuration Quadcopter Using PID Controller

    by Sereyvatha Sarin, Chivon Choeung, Sophyn Srey, Sarot Srang

    Quadcopters are gaining popularity in UAV platforms within the control community because of their intricate dynamics and significant potential in outside applications, owing to their advantages over conventional aerial vehicles. This work introduces the mathematical modeling of a basic quadcopter using an X-configuration and simulates its target position using MATLAB. A Proportional-Integral-Derivative (PID) controller is designed for controlling the position and stabilizing the attitude of the quadcopter. The quadcopter's underactuated nature allows this PID controller to maneuver the vehicle in three dimensions and adjust the yaw angle to the required values while stabilizing the pitch and roll angles. The controller's performance and robustness are assessed through simulations using MATLAB and Simulink. The results illustrate the efficacy and quality of PID control in the positioning regulation of a quadcopter.


  • Open Access

    Symmetrical components‐based robust stabilizing control of a grid‐connected inverter under unbalanced voltage sag

    by Chivon Choeung, Yahya Danayiyen, Sarot Srang, Young‐Il Lee

    This study presents an approach for robust current and power control for a three‐phase grid‐connected inverter set up with an L‐filter that operates under an unbalanced AC grid‐voltage source. This control method consists of two paralleled current control for the positive and negative sequences to accomplish one of three selective control targets: a) supplying balanced three‐phase current; b) supplying non‐oscillated real power; and c) supplying non‐oscillated imaginary power to the AC grid for a given reference value utilizing the identical control gains. The real and imaginary power references, together with the measured grid voltages, are used in the computation of the reference current for each control target. In addition, the proposed dual‐current control system has a control law that comprises state feedback to offer stability and an integral effect to get rid of the offset error in the dq ‐frame. To reduce settling time under uncertain system conditions, an optimization problem based on linear matrix inequalities is solved to determine a set of robust stabilizing gains. Simulation and experimental results using a TMS320F28377D digital signal processor validate the proposed control performance under three control targets.


  • Open Access

    Robust Voltage Control of a Single-Phase UPS Inverter Utilizing LMI-Based Optimization with All-Pass Filter Under System Uncertainty

    by Heng Tang, Chivon Choeung, Sarot Srang, Bunne So, Socheat Yay, Panha Soth, Horchhong Cheng

    This paper proposes a systematic control design for a single-phase LC-filtered inverter considering uncertain system parameters. One major difficulty in controlling single-phase power converters is the lack of a direct conversion method for transforming single-phase signals into dq-frame signals. By employing an all-pass filter in this proposed approach, it is possible to control the output voltage in terms of DC quantity or the dq-rotating frame. Furthermore, voltage stability and harmonic distortion (THD) minimization of the uninterruptible power supply (UPS) are major concerns in inverter design. Therefore, this controller uses integral action to get rid of steady-state errors and stabilize the closed-loop system by the state feedback control. In order to enlarge and guarantee the stability range in the presence of potential parameter fluctuations, an uncertainty model is being considered. In this context, the uncertainty models refer to the potential model with variations in the filter's inductance and capacitance caused by operating temperature, aging, and various external factors. The efficacy of the control approach is assessed through simulations and experiments, with the objective of comparing its results with those of the PI control using a control board featuring a TMS320F28335 digital signal processor. Consequently, the proposed approach offers lower THD at every load step with lesser afford in performance tuning in comparison to the PI method.


  • Open Access

    Adaptive Controller Based on Estimated Parameters for Quadcopter Trajectory Tracking

    by Sophyn Srey, Sarot Srang

    This paper presents a trajectory control system design for a quadcopter, an unmanned aerial vehicle (UAV), which is based on estimated parameters that are assumed to exhibit random walk behavior. Initially, the rotational dynamic model of the UAV is formulated using the Newton Euler method in terms of angular velocity about the x, y, and z axes. This model is then simplified into three separated-first-order linear differential equations, with coefficients derived from the combined effects of inertia, aerodynamic drag, and gyroscopic effects, referred to as lumped parameters. A Proportional-Integral (PI) controller with feed-forward design is then developed to control this simplified model. To adapt the controller to the lumped parameters that exhibit random walk behavior, each simplified equation is restructured into a processing and measurement model. The states of these models are estimated by using the Unscented Kalman Filter (UKF). These estimated values are then utilized to adjust the PI gains and compensate the signal of the designed angular velocity controller, transforming it into an adaptive controller. The entire UAV controller comprises two main parts, an inner loop for adaptive angular rate control and an outer loop serving as an attitude-thrust controller. The proposed controller is simulated using Simulink, with circular and square trajectories. The simulation results demonstrate that the quadcopter successfully follows the desired circular and square paths. The steady-state error for the x and y axes in the square trajectory is less than 0.05 meters within 5 seconds, and for the z axis, it is less than 0.02 meters within 2.5 seconds. The controller gains do not require adjustment when changing trajectories. Moreover, the estimated parameters remain nearly constant at steady state.


  • Open Access

    Performance Investigation of Low-Cost Dual-Axis Solar Tracker using Light Dependent Resistor

    by Chivorn Keo, Sarot Srang, Rattana Seng

    To generate power, the solar tracker mechanism can be mounted on a stationary or mobile platform. Moving platforms include boats, ground vehicles, and aerial vehicles. The solar tracker must be a mechanism that can keep the solar panel perpendicular to the direction of the sun at an appropriate level of precision in order to be more effective. Therefore, this research is going to investigate the performance of a low-cost dual-axis solar tracker (parallel mechanism) installed on a moving platform. This work describes the simulation and experiment of a dual-axis solar tracker that is mounted on a rotating support plate with rotational axis. This simulation uses the method of controlling linear actuators to adjust the solar panel perpendicular to the direction of sunlight. Both actuators were controlled by proportional and integral controllers (PI), which will make the system have a faster response time. The tracker is equipped with a type of low-cost sunlight sensor to provide the information for determining the orientation of the sunlight vector with respect to the solar panel. The sunlight sensor was designed and fabricated on our own by adding four light-dependent resistors in the four different quadrants. For the purpose of tracking the sun, the mathematical models of the tracker mechanism, sun sensor, and control architecture are defined. The results of simulation and experiment demonstrate that the tracker control system can follow the sun with some tracking error (about 2 degrees) at its final alignment. In real-time applications, solar trackers can be used on vehicles or boats to adjust solar panels on their surfaces and increase their exposure to sunlight and electrical output.


  • Open Access

    Comparison between Compensated and Uncompensated PD with Cascade Controller Design of PMDC Motor: Real Experiments

    by Sopheak Yean, Sarot Srang

    In this paper, we compare two different kinds of position controllers, namely PD (both compensated and uncompensated PD) and Cascade controller (both compensated and uncompensated Cascade). SIMULINK software is used to implement lumped parameters estimation with UKF. The Proportional-Derivative (PD) controller design by root locus and Cascade controller design have been chosen for our feedback system, and coulomb friction as disturbance is taken into account in the estimation model. The aim of this paper is to find out which controller is better (both compensated and uncompensated PD controller vs. both compensated and uncompensated Cascade controller). Therefore, the objective is to show how useful the parameter estimation for controller design with compensation. Through comparing two position controller designs, the experiment results show that both Compensated Proportional Derivative (PD) controller and Cascade controller Design have much better performance than the Uncompensated ones.

  • Open Access

    Evaluating Text-to-Image GANs Performance: A Comparative Analysis of Evaluation Metrics

    by K. Dinesh Kumar, Sarot Srang, Dona Valy

    Generative Adversarial Networks (GANs) have emerged as powerful techniques for generating high-quality images in various domains but assessing how realistic the generated images are is a challenging task. To address this issue, researchers have proposed a variety of evaluation metrics for GANs, each with its own strengths and limitations. This paper presents a comprehensive analysis of popular GAN evaluation metrics, including FID, Mode Score, Inception Score, MMD, PSNR, and SSIM. The strengths, weaknesses, and calculation processes of these metrics are discussed, focusing on assessing image fidelity and diversity. Two approaches, pixel distance, and feature distance, are employed to measure image similarity, while the importance of evaluating individual objects using input captions is emphasized. Experimental results on a basic GAN trained on the MNIST dataset demonstrate improvement in various metrics across different epochs. The FID score decreases from 497.54594 at Epoch 0 to 136.91156 at Epoch 100, indicating improved differentiation between real and generated images. In addition, the Inception Score increases from 1.1533 to 1.6408, reflecting enhanced image quality and diversity. These findings highlight the effectiveness of the GAN model in generating more realistic and diverse images with training progression. However, when it comes to evaluating GANs on complex datasets, challenges arise, highlighting the need to combine evaluation metrics with visual inspection and subjective measures of image quality. By adopting a comprehensive evaluation approach, researchers can gain a deeper understanding of GAN performance and guide the development of advanced models.