JSJürgen Seidel

Jürgen Seidel

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jürgen Seidel has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Computational Analysis of a Towed Jumper During Static Line Airborne Operations: A Parametric Study Using Various Airdrop Configurations

    by Usbaldo Fraire, Mehdi Ghoreyshi, Adam Jirasek, Keith Bergeron, Jürgen Seidel

    This study uses the CREATETM-AV/Kestrel simulation software to model a towed jumper scenario using standard aircraft settings to quantify paratrooper stability and risk of contact during static line airborne operations. The focus areas of this study include a review of the technical build-up, which includes aircraft, paratrooper and static line modeling, plus preliminary functional checkouts executed to verify simulation performance. This research and simulation development effort is driven by the need to meet the analysis demands required to support the US Army Personnel Airdrop with static line length studies and the North Atlantic Treaty Organization (NATO) Joint Airdrop Capability Syndicate (JACS) with airdrop interoperability assessments. Each project requires the use of various aircraft types, static line lengths and exit procedures. To help meet this need and establish a baseline proof of concept (POC) simulation, simulation setups were developed for a towed jumper from both the C-130J and C-17 using a 20-ft static line to support US Army Personnel Airdrop efforts. Concurrently, the JACS is requesting analysis to support interoperability testing to help qualify the T-11 parachute from an Airbus A400M Atlas aircraft, operated by NATO nations. Due to the lack of an available A400M geometry, the C-17 was used to demonstrate the POC, and plans to substitute the geometry are in order when it becomes available. The results of a nominal Computational Fluid Dynamics (CFD) simulation run using a C-17 and C-130J will be reviewed with a sample of the output to help characterize performance differences for the aircraft settings selected. The US Army Combat Capabilities Development Command Soldier Center (DEVCOM-SC) Aerial Delivery Division (ADD) has partnered with the US Air Force Academy (USAFA) High Performance Computing Research Center (HPCRC) to enable Modeling and Simulation (M&S) capabilities that support the Warfighter and NATO airdrop interoperability efforts.


  • Open Access

    Design of Input Signal for System Identification of a Generic Fighter Configuration

    by Mehdi Ghoreyshi, Pooneh Aref, Jürgen Seidel

    This article investigates the design of time-accurate input signals in the angle-of-attack and pitch rate space to identify the aerodynamic characteristics of a generic triple-delta wing configuration at subsonic speeds. Regression models were created from the time history of signal simulations in DoD HPCMP CREATETM-AV/Kestrel software. The input signals included chirp, Schroeder, pseudorandom binary sequence (PRBS), random, and sinusoidal signals. Although similar in structure, the coefficients of these regression models were estimated based on the specific input signals. The signals covered a wide range of angle-of-attack and pitch rate space, resulting in varying regression coefficients for each signal. After creating and validating the models, they were used to predict static aerodynamic data at a wide range of angles of attack but with zero pitch rate. Next, slope coefficients and dynamic derivatives in the pitch direction were estimated from each signal. These predictions were compared with each other as well as with the ONERA wind tunnel data and some CFD calculations from the DLR TAU code provided by the NATO Science and Technology Organization research task group AVT-351. Subsequently, the models were used to predict different pitch oscillations at various mean angles of attack with given amplitudes and frequencies. Again, the model predictions were compared with wind tunnel data. Final predictions involved responses to new signals from different models. A feed-forward neural network was then used to model pressure coefficients on the upper surface of the vehicle at different spanwise sections for each signal and the validated models were used to predict pressure data at different angles of attack. Overall, the models predict similar integrated forces and moments, with the main discrepancies appearing at higher angles of attack. All models failed to predict the stall behavior observed in the measurements and CFD data. Regarding the pressure data, the PRBS signal provided the best accuracy among all the models.


  • Open Access

    High-Fidelity Simulations of Flight Dynamics and Trajectory of a Parachute–Payload System Leaving the C-17 Aircraft

    by Mehdi Ghoreyshi, Keith Bergeron, Jürgen Seidel

    This article examines the flight dynamics and trajectory analysis of a parachute–payload system deployed from a C-17 aircraft. The aircraft is modeled with an open cargo door, extended flaps, and four turbo-fan engines operating at an altitude of 2000 feet Above Ground Level (AGL) and an airspeed of 150 knots. The payloads consist of simplified CONEX containers measuring either 192 inches or 240 inches in length, 9 feet in width, and 5.3 feet in height, with their mass and moments of inertia specified. At positive deck angles, gravitational forces cause these payloads to begin a gradual descent from the rear of the aircraft. For aircraft at zero deck angle, a ring-slot parachute with approximately 20% geometric porosity is utilized to extract the payload from the aircraft. This study specifically employs the CREATE-AV Kestrel simulation software to model the chute-payload system. The extraction and suspension lines are represented using Kestrel’s Catenary capability, with the extraction line connected to the floating confluence points of the CONEX container and the chute. The chute and payload will experience coupled motion, allowing for an in-depth analysis of the flight dynamics and trajectory of both elements. The trajectory data obtained will be compared to that of a payload (without chute and cables) exiting the aircraft at positive deck angles. An adaptive mesh refinement technique is applied to accurately capture the engine exhaust flow and the wake generated by the C-17, chute, and payloads. Friction and ejector forces are estimated to align the exit velocity and timing with those recorded during flight testing. The results indicate that the simulation of extracted payloads aligns with expected trends observed in flight tests. Notably, higher deck angles result in longer distances from the ramp, leading to increased exit velocities and reduced payload rotation rates. All payloads exhibit clockwise rotation upon leaving the ramp. The parachute extraction method yields significantly higher exit velocities and shorter exit times, while the payload-chute acceleration correlates with the predicted drag of the chute as demonstrated in prior studies.


  • Vortex Interaction Characteristics of Multiswept Wings at Subsonic Speeds

    by Mehdi Ghoreyshi, Casey Fagley, Jürgen Seidel

    Despite the sufficient knowledge on the physics of vortices formed over slender delta wings, there is a lack of understanding about how corotating and counter-rotating vortices near the wing leading edge interact with each other. The vortex interaction will depend on the wing planform, leading-edge sweeps, leading-edge shapes, angle of attack, angle of sideslip, and the Reynolds number. In this study, experiments were performed on a range of planform configurations to determine the influence of multisweep wing configurations on the vortex interactions and breakdown thereof. Force/moment measurements were conducted to understand globally the effect of the planform configuration, whereas particle tracking surface oil flow and stereoscopic particle image velocimetry were employed to detect interactions locally in the flowfield. Results were validated against corresponding numerical simulations and past experiments. Comprehensive results indicated a strong correlation between the chord ratios of the initial sweep on the suppression of vortex breakdown. Specifically, two cases with varying chord ratios were identified that exhibited unique vortex breakdown progression (gradual and rapid). Flowfield measurements elucidated key flow features responsible for the differing breakdown progression.


  • Computational investigation of quiet propeller designs for small unmanned aerial vehicles

    by Mehdi Ghoreyshi, Pooneh Aref, Charles F. Wisniewski, Jürgen Seidel, Kenneth W. Van Treuren


  • Computational validation and system identification modeling for stability and control predictions

    by M. Ghoreyshi, A. Jirasek, J. Seidel

    This article presents the results of the first AIAA Stability and Control Prediction Workshop obtained at the U.S. Air Force Academy using the kCFD flow solver of the ${\rm{HPCMP}}\;{\rm{CREAT}}{{\rm{E}}^{{\rm{TM}}}}$ -AV Kestrel simulation tools. The test case considered is a large-scale Common Research Model (CRM) tested at the ONERA S1MA wind tunnel at different transonic speeds and fixed lift coefficient values at zero and non-zero side-slip angles. The computational results include a grid sensitivity analysis and validation with available experimental data. In addition, the Mach number and sting effects on the predicted stability and control values of the test case are investigated. Finally, a system identification method using a regression model is developed and used for prediction of stability and control data. The regression coefficients are estimated from an input signal with varying-frequency changes in the angle-of-attack, pitch rate, and side-slip angle. Once the model was created, it was used to predict the static and dynamic aerodynamic data of the test cases. The results show that the model predictions match very well with calculated CFD data at discrete flow conditions.