Yifeng Qin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yifeng Qin has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Chunxu Mao
South China University of Technology
4 shared publications - Hongyi Zhu
Department of Broadband Network, Shanghai Engineering Research Center for Broadband Technologies and Applications, Shanghai, China
4 shared publications - Long Zhang
College of Electronics and Information Engineering, Shenzhen University, Shenzhen 518060, China
4 shared publications Hongbin Li
State Key Laboratory of Photonics and Communications, School of Electronics, Peking University, Beijing, China
3 shared publications- Kun Xue
Peng Cheng Laboratory, Shenzhen, China
3 shared publications - Min Han
Institute of Systems Engineering, Academy of Military Sciences, Peoples Liberation Army of China, Beijing, China
3 shared publications
Latest Publications
- 14 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications
- Vol. PP (15361284) , 1-9
A Multi-Dimensional Multiplexing Intelligent Omni-Surface: Principles and Experiments
Future 6G networks demand a paradigm shift towards smart wireless environments with integrated communication, sensing, and security capabilities. Intelligent Omni-Surfaces (IOS) are emerging as a pivotal technology to realize this vision by offering full-space coverage and adaptive control of wireless signals. However, the practical realization and multi-functional potential of such surfaces remain largely unexplored. This article, for the first time, presents the design, fabrication, and comprehensive experimental validation of a novel multi-dimensional multiplexing IOS. A key distinction of our design is its inherent frequency-selective functionality, enabling different operational modes (e.g., reflection-dominant, transmission-dominant) across separate sub-bands. This spectral multiplexing, combined with spatial and temporal control, provides unprecedented flexibility. We showcase its transformative capabilities through three key application demonstrations: (1) high-fidelity full-space communication supporting 256-QAM; (2) a high-efficiency Integrated Sensing and Communications (ISAC) protocol for accurate target tracking; and (3) a multi-layered security framework uniquely enabled by the IOS’s frequency-selective modes and adaptive null steering. These pioneering experimental results provide tangible proof of the immense potential of multiplexing IOS, bridging the gap between theoretical concepts and real-world implementation, and paving the way for future intelligent, secure, and multi-functional wireless networks.
- 14 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications
- Vol. PP (15361284) , 1-9
A Multi-Dimensional Multiplexing Intelligent Omni-Surface: Principles and Experiments
Future 6G networks demand a paradigm shift towards smart wireless environments with integrated communication, sensing, and security capabilities. Intelligent Omni-Surfaces (IOS) are emerging as a pivotal technology to realize this vision by offering full-space coverage and adaptive control of wireless signals. However, the practical realization and multi-functional potential of such surfaces remain largely unexplored. This article, for the first time, presents the design, fabrication, and comprehensive experimental validation of a novel multi-dimensional multiplexing IOS. A key distinction of our design is its inherent frequency-selective functionality, enabling different operational modes (e.g., reflection-dominant, transmission-dominant) across separate sub-bands. This spectral multiplexing, combined with spatial and temporal control, provides unprecedented flexibility. We showcase its transformative capabilities through three key application demonstrations: (1) high-fidelity full-space communication supporting 256-QAM; (2) a high-efficiency Integrated Sensing and Communications (ISAC) protocol for accurate target tracking; and (3) a multi-layered security framework uniquely enabled by the IOS’s frequency-selective modes and adaptive null steering. These pioneering experimental results provide tangible proof of the immense potential of multiplexing IOS, bridging the gap between theoretical concepts and real-world implementation, and paving the way for future intelligent, secure, and multi-functional wireless networks.
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 25, 24299-24313
Overcoming Half-Space Blockage: Airy Beamforming for Radiative Near-Field Multiuser XL-MIMO Communications
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 25, 24299-24313
Overcoming Half-Space Blockage: Airy Beamforming for Radiative Near-Field Multiuser XL-MIMO Communications
- 23 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (3) , 1044-1048
EBG-Based Reconfigurable Multimode Antennas Analyzed by Multiconductor Transmission Line Theory
This letter presents an EBG-based coplanar multi-conductor composite right-/left-handed (CRLH) unit cell for multi-band, multi-mode antenna design. The unit cell features a central mushroom structure integrated with two coplanar parasitic microstrip lines, offering enhanced design flexibility compared to conventional structures. Theoretical analysis using multi-conductor transmission line theory and an equivalent circuit model investigates the unit cell's properties. Based on this principle, a mode/frequency reconfigurable antenna for variable radiation patterns is proposed. The measured results indicate that by controlling the switching states of the PIN diodes, the antenna's operating bands can be reconfigured from 2.45 GHz (2.42–2.48 GHz) and 4.3 GHz (4.26–4.36 GHz) to 3.5 GHz (3.44–3.51 GHz) and 4.1 GHz (4.07–4.11 GHz). Moreover, the antenna's radiation mode can be switched from an omnidirectional pattern to a directional one. The results confirmed the efficacy of the proposed methodologies for dual-band, dual-mode antenna development based on multi-conductor CRLH structures.
- 23 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (3) , 1044-1048
EBG-Based Reconfigurable Multimode Antennas Analyzed by Multiconductor Transmission Line Theory
This letter presents an EBG-based coplanar multi-conductor composite right-/left-handed (CRLH) unit cell for multi-band, multi-mode antenna design. The unit cell features a central mushroom structure integrated with two coplanar parasitic microstrip lines, offering enhanced design flexibility compared to conventional structures. Theoretical analysis using multi-conductor transmission line theory and an equivalent circuit model investigates the unit cell's properties. Based on this principle, a mode/frequency reconfigurable antenna for variable radiation patterns is proposed. The measured results indicate that by controlling the switching states of the PIN diodes, the antenna's operating bands can be reconfigured from 2.45 GHz (2.42–2.48 GHz) and 4.3 GHz (4.26–4.36 GHz) to 3.5 GHz (3.44–3.51 GHz) and 4.1 GHz (4.07–4.11 GHz). Moreover, the antenna's radiation mode can be switched from an omnidirectional pattern to a directional one. The results confirmed the efficacy of the proposed methodologies for dual-band, dual-mode antenna development based on multi-conductor CRLH structures.
- 23 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (11) , 3961-3965
Inverse Design of Dual-Layer Chiral Metasurfaces Through Tandem Deep Learning Network
This letter introduces a tandem cascade network model using deep learning for inverse design of dual-layer chiral metamaterials. We uniquely employ the chirality coefficient κ, a direct measure of magnetoelectric coupling, as the optimization target, providing a physically grounded approach to inverse design that offers a more comprehensive characterization of chiral responses compared to traditional transmission coefficients. Our model efficiently predicts chiral responses across six fundamental patterns at different rotation angles, demonstrating its generality. Using 22,000 training samples, both forward and inverse networks achieve computation speeds approximately 106 times faster than conventional simulations. Validated experimental results demonstrate high prediction accuracy with MSE values well within 7.5 × 10-3 for all test samples, and robust generalization across diverse dual-layer patterns.
- 23 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (11) , 3961-3965
Inverse Design of Dual-Layer Chiral Metasurfaces Through Tandem Deep Learning Network
This letter introduces a tandem cascade network model using deep learning for inverse design of dual-layer chiral metamaterials. We uniquely employ the chirality coefficient κ, a direct measure of magnetoelectric coupling, as the optimization target, providing a physically grounded approach to inverse design that offers a more comprehensive characterization of chiral responses compared to traditional transmission coefficients. Our model efficiently predicts chiral responses across six fundamental patterns at different rotation angles, demonstrating its generality. Using 22,000 training samples, both forward and inverse networks achieve computation speeds approximately 106 times faster than conventional simulations. Validated experimental results demonstrate high prediction accuracy with MSE values well within 7.5 × 10-3 for all test samples, and robust generalization across diverse dual-layer patterns.
- 30 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (5) , 3412-3417
A Reconfigurable Gain-Filtering Reflectarray Using 1-bit SRR-Based Magnetoelectric Dipole
This paper presents a novel broadband, highly frequency-selective reconfigurable reflectarray (RRA) utilizing magnetoelectric (ME) dipoles and a filtering bias network. The ME dipole employs a split-ring-resonator (SRR) structure, which inherently offers a high-band suppression characteristic. When combined with a wideband low-pass filtering bias network, the system achieves exceptional frequency selectivity. A PIN diode is strategically positioned at the virtual input port of the filtering network with high isolation between signal and DC bias, achieved through an integrated LC filter. By switching the PIN diode, a stable 180° phase difference is achieved across a broad bandwidth. The equivalent 1-bit manipulation, being highly band-selective, enables the RRA to demonstrate an outstanding capability of gain-filtering beamforming. To validate the proposed concept, a reflectarray with 28 × 32 cells was fabricated, and an FPGA board was used to control the states of each diode. Measurement results show that the RRA achieves a peak gain of 19.7 dBi and a 3dB gain bandwidth of 29.6% from 10.5GHz to 14.2 GHz, closely aligning with simulation results. Notably, the reflectarray maintains an excellent gain-filtering performance as the reflected beam is steered from 0° to 40°. The proposed reconfigurable gain-filtering reflectarray presents a promising solution for multi-spectrum coexistent wireless communications.
- 30 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (5) , 3412-3417
A Reconfigurable Gain-Filtering Reflectarray Using 1-bit SRR-Based Magnetoelectric Dipole
This paper presents a novel broadband, highly frequency-selective reconfigurable reflectarray (RRA) utilizing magnetoelectric (ME) dipoles and a filtering bias network. The ME dipole employs a split-ring-resonator (SRR) structure, which inherently offers a high-band suppression characteristic. When combined with a wideband low-pass filtering bias network, the system achieves exceptional frequency selectivity. A PIN diode is strategically positioned at the virtual input port of the filtering network with high isolation between signal and DC bias, achieved through an integrated LC filter. By switching the PIN diode, a stable 180° phase difference is achieved across a broad bandwidth. The equivalent 1-bit manipulation, being highly band-selective, enables the RRA to demonstrate an outstanding capability of gain-filtering beamforming. To validate the proposed concept, a reflectarray with 28 × 32 cells was fabricated, and an FPGA board was used to control the states of each diode. Measurement results show that the RRA achieves a peak gain of 19.7 dBi and a 3dB gain bandwidth of 29.6% from 10.5GHz to 14.2 GHz, closely aligning with simulation results. Notably, the reflectarray maintains an excellent gain-filtering performance as the reflected beam is steered from 0° to 40°. The proposed reconfigurable gain-filtering reflectarray presents a promising solution for multi-spectrum coexistent wireless communications.
- 5 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (11) , 3754-3758
Cost-Effective Dual-Polarized Millimeter-Wave Reconfigurable Reflect-Array Antenna
This letter presents a novel dual-polarized millimeter-wave reconfigurable reflect-array antenna (RRA) with a cost-effective design. The proposed RRA element features two sets of orthogonal and rotationally symmetrical dipoles, each integrating only one p-i-n diode, which reduces the cost of active components and simplifies the layout of biasing circuits. By controlling the states of the corresponding-polarized diode, independent 1-bit phase shifts can be achieved for dual-linear polarizations. A 16 × 16-element RRA prototype is simulated, fabricated, and tested, with measurement and simulation results showing a good agreement. Both polarizations demonstrate independent 2-D beam scanning capabilities, with a maximum scanning angle of 50° and a gain drop of 3.1 dB. The maximum measured realized gains for x- and y-polarization are 19.4 dBi and 20.1 dBi, corresponding to aperture efficiencies of 13.3% and 15.7%, respectively.
- 5 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (11) , 3754-3758
Cost-Effective Dual-Polarized Millimeter-Wave Reconfigurable Reflect-Array Antenna
This letter presents a novel dual-polarized millimeter-wave reconfigurable reflect-array antenna (RRA) with a cost-effective design. The proposed RRA element features two sets of orthogonal and rotationally symmetrical dipoles, each integrating only one p-i-n diode, which reduces the cost of active components and simplifies the layout of biasing circuits. By controlling the states of the corresponding-polarized diode, independent 1-bit phase shifts can be achieved for dual-linear polarizations. A 16 × 16-element RRA prototype is simulated, fabricated, and tested, with measurement and simulation results showing a good agreement. Both polarizations demonstrate independent 2-D beam scanning capabilities, with a maximum scanning angle of 50° and a gain drop of 3.1 dB. The maximum measured realized gains for x- and y-polarization are 19.4 dBi and 20.1 dBi, corresponding to aperture efficiencies of 13.3% and 15.7%, respectively.
- 1 April 2024
- Published by Elsevier in Optics & Laser Technology
- Vol. 176
Optically transparent meta-window for satellite signal reception
- 1 April 2024
- Published by Elsevier in Optics & Laser Technology
- Vol. 176
Optically transparent meta-window for satellite signal reception
- Top Cited PapersOpen Access
- 4 October 2023
- Published by Wiley in Nanophotonics
- Vol. 12 (20) , 3871-3881
Diffusion probabilistic model based accurate and high‐degree‐of‐freedom metasurface inverse design
Conventional meta‐atom designs rely heavily on researchers’ prior knowledge and trial‐and‐error searches using full‐wave simulations, resulting in time‐consuming and inefficient processes. Inverse design methods based on optimization algorithms, such as evolutionary algorithms, and topological optimizations, have been introduced to design metamaterials. However, none of these algorithms are general enough to fulfill multi‐objective tasks. Recently, deep learning methods represented by generative adversarial networks (GANs) have been applied to inverse design of metamaterials, which can directly generate high‐degree‐of‐freedom meta‐atoms based on S‐parameters requirements. However, the adversarial training process of GANs makes the network unstable and results in high modeling costs. This paper proposes a novel metamaterial inverse design method based on the diffusion probability theory. By learning the Markov process that transforms the original structure into a Gaussian distribution, the proposed method can gradually remove the noise starting from the Gaussian distribution and generate new high‐degree‐of‐freedom meta‐atoms that meet S‐parameters conditions, which avoids the model instability introduced by the adversarial training process of GANs and ensures more accurate and high‐quality generation results. Experiments have proven that our method is superior to representative methods of GANs in terms of model convergence speed, generation accuracy, and quality.
- 4 October 2023
- Published by Wiley in Nanophotonics
- Vol. 12 (20) , 3871-3881
Top Cited PapersOpen AccessDiffusion probabilistic model based accurate and high‐degree‐of‐freedom metasurface inverse design
Conventional meta‐atom designs rely heavily on researchers’ prior knowledge and trial‐and‐error searches using full‐wave simulations, resulting in time‐consuming and inefficient processes. Inverse design methods based on optimization algorithms, such as evolutionary algorithms, and topological optimizations, have been introduced to design metamaterials. However, none of these algorithms are general enough to fulfill multi‐objective tasks. Recently, deep learning methods represented by generative adversarial networks (GANs) have been applied to inverse design of metamaterials, which can directly generate high‐degree‐of‐freedom meta‐atoms based on S‐parameters requirements. However, the adversarial training process of GANs makes the network unstable and results in high modeling costs. This paper proposes a novel metamaterial inverse design method based on the diffusion probability theory. By learning the Markov process that transforms the original structure into a Gaussian distribution, the proposed method can gradually remove the noise starting from the Gaussian distribution and generate new high‐degree‐of‐freedom meta‐atoms that meet S‐parameters conditions, which avoids the model instability introduced by the adversarial training process of GANs and ensures more accurate and high‐quality generation results. Experiments have proven that our method is superior to representative methods of GANs in terms of model convergence speed, generation accuracy, and quality.
- Open Access
- 7 August 2023
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 59 (15)
Low‐profile broadband circularly polarized short‐circuited dipole antenna with backed cavity
A broadband circularly polarized (CP) dipole antenna with a backed cavity is presented in this letter. The proposed antenna consists of a pair of rotational symmetric short‐circuited branches and a Γ‐shaped feed structure. Each branch is designed to be axe‐shaped so that the antenna can achieve a broad 3‐dB axial ratio (AR) bandwidth. The coupled feeding method assures the antenna is wideband, and the shorting‐to‐the‐ground technique miniaturizes the lateral dimensions of the antenna. The profile of the proposed antenna is around 0.16 λ L ( λ L denotes the wavelength of the lower bound frequency). The introduction of a back cavity effectively enhances the boresight gain and improves the isolation level if the antenna is used to form an array. Finally, the design is prototyped, and the measurement results agree well with the simulation. The fractal voltage standing wave ratio (VSWR)<2 bandwidth and 3‐dB AR bandwidths are 61.15% (2.725–5.125 GHz) and 45.9% (3.15–5.03 GHz), respectively. The antenna's efficiency exceeds 91.5% over the target frequency band.
- 7 August 2023
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 59 (15)
Open AccessLow‐profile broadband circularly polarized short‐circuited dipole antenna with backed cavity
A broadband circularly polarized (CP) dipole antenna with a backed cavity is presented in this letter. The proposed antenna consists of a pair of rotational symmetric short‐circuited branches and a Γ‐shaped feed structure. Each branch is designed to be axe‐shaped so that the antenna can achieve a broad 3‐dB axial ratio (AR) bandwidth. The coupled feeding method assures the antenna is wideband, and the shorting‐to‐the‐ground technique miniaturizes the lateral dimensions of the antenna. The profile of the proposed antenna is around 0.16 λ L ( λ L denotes the wavelength of the lower bound frequency). The introduction of a back cavity effectively enhances the boresight gain and improves the isolation level if the antenna is used to form an array. Finally, the design is prototyped, and the measurement results agree well with the simulation. The fractal voltage standing wave ratio (VSWR)<2 bandwidth and 3‐dB AR bandwidths are 61.15% (2.725–5.125 GHz) and 45.9% (3.15–5.03 GHz), respectively. The antenna's efficiency exceeds 91.5% over the target frequency band.
- 17 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 72 (12) , 16742-16747
A Compact Dual-Band Omnidirectional Circularly Polarized Filtering Antenna for UAV Communications
A compact, low-profile, dual-band (2.4/5.8 GHz) omnidirectional circularly polarized (CP) antenna for consumer Unmanned Aerial Vehicle (UAV) communications is proposed. Given the constraints of UAV installation, we incorporate complex miniaturization etching techniques into the antenna design. The low-frequency resonance is primarily realized by four short-terminated arcs, while the high-frequency resonance is predominantly induced by four open-terminated branches. In addition, a dual-band coupled strip-line filter is cascaded to the radiator, enhancing the design's bandwidths. A prototype of the antenna is simulated, fabricated, and measured, resulting in final dimensions of 0.2 × 0.2 × 0.042λ 0 3 (λ 0 is the free-space wavelength at 2.4 GHz). The -10 dB | S 11 | and 3 dB Axial Ratio (AR) overlapped bandwidths reach 40 and 125 MHz for the low- and high-frequency bands, respectively. Lastly, we present an example of integrating the antenna into a quadcopter UAV and briefly discuss the potential of applying this antenna for a Multiple-Input, Multiple-Output (MIMO) system.
- 17 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 72 (12) , 16742-16747
A Compact Dual-Band Omnidirectional Circularly Polarized Filtering Antenna for UAV Communications
A compact, low-profile, dual-band (2.4/5.8 GHz) omnidirectional circularly polarized (CP) antenna for consumer Unmanned Aerial Vehicle (UAV) communications is proposed. Given the constraints of UAV installation, we incorporate complex miniaturization etching techniques into the antenna design. The low-frequency resonance is primarily realized by four short-terminated arcs, while the high-frequency resonance is predominantly induced by four open-terminated branches. In addition, a dual-band coupled strip-line filter is cascaded to the radiator, enhancing the design's bandwidths. A prototype of the antenna is simulated, fabricated, and measured, resulting in final dimensions of 0.2 × 0.2 × 0.042λ 0 3 (λ 0 is the free-space wavelength at 2.4 GHz). The -10 dB | S 11 | and 3 dB Axial Ratio (AR) overlapped bandwidths reach 40 and 125 MHz for the low- and high-frequency bands, respectively. Lastly, we present an example of integrating the antenna into a quadcopter UAV and briefly discuss the potential of applying this antenna for a Multiple-Input, Multiple-Output (MIMO) system.