Sylvain Combrié
Research Subjects
Sylvain Combrié has a total of 127 co-authors. Here are the top co-authors by number of shared publications:
- Alfredo De Rossi
Thales Research and Technology
18 shared publications Alfredo De Rossi
Thales Research and Technology, Campus Polytechnique, 1 avenue Augustin Fresnel, 91767 Palaiseau, France
7 shared publications- Pierre Colman
Laboratoire Interdisciplinaire Carnot de Bourgogne UMR CNRS 6303, Université Bourgogne–Franche-Comté, 9 avenue Savary, 21000 Dijon, France
4 shared publications - Fabrice Raineri
Université Côte d’Azur, CNRS, Institut de Physique de Nice, 06200, Nice, France
3 shared publications - Gadi Eisenstein
Technion—Israel Institute of Technology
3 shared publications - Gregory Moille
Joint Quantum Institute NIST/University of Maryland College Park USA
3 shared publications
Latest Publications
- Open Access
- 20 November 2025
- Published by Springer Nature in Communications Physics
- Vol. 8 (1)
Mode-locking in a semiconductor photonic bandgap laser
- 20 November 2025
- Published by Springer Nature in Communications Physics
- Vol. 8 (1)
Open AccessMode-locking in a semiconductor photonic bandgap laser
- 6 February 2024
- Published by Springer Nature in Nature Photonics
- Vol. 18 (2) , 112-113
The dawn of chimera optical resonators
- 6 February 2024
- Published by Springer Nature in Nature Photonics
- Vol. 18 (2) , 112-113
The dawn of chimera optical resonators
- Open Access
- 10 July 2023
- Published by Wiley in Advanced Electronic Materials
- Vol. 9 (10)
High‐Speed Optoelectronic Graphene Sampler at 1.55 µm Reaching Intrinsic Performances
Optoelectronic sampling is the ultimate method to perform ultra‐high frequency analog‐to‐digital conversion. Thanks to the ps photo‐thermo‐bolometric effect in high mobility hexagonal boron nitride (h‐BN) encapsulated graphene, a state‐of‐the‐art optoelectronic sampler over a 40 GHz bandwidth using a 4 ps pulsed laser is demonstrated. The superior transport and optoelectronic linearities of this graphene sampler lead to very high harmonic rejections below –43 dB above 20 GHz. With a physics‐based microscopic model, it is shown that harmonics are generated by optoelectronics saturation effects and only appear when carrier energy reaches that of optical phonons, which is very high in h‐BN encapsulated graphene. This device is the first ultra‐fast optoelectronic sampler based on the bolometric effect.
- 10 July 2023
- Published by Wiley in Advanced Electronic Materials
- Vol. 9 (10)
Open AccessHigh‐Speed Optoelectronic Graphene Sampler at 1.55 µm Reaching Intrinsic Performances
Optoelectronic sampling is the ultimate method to perform ultra‐high frequency analog‐to‐digital conversion. Thanks to the ps photo‐thermo‐bolometric effect in high mobility hexagonal boron nitride (h‐BN) encapsulated graphene, a state‐of‐the‐art optoelectronic sampler over a 40 GHz bandwidth using a 4 ps pulsed laser is demonstrated. The superior transport and optoelectronic linearities of this graphene sampler lead to very high harmonic rejections below –43 dB above 20 GHz. With a physics‐based microscopic model, it is shown that harmonics are generated by optoelectronics saturation effects and only appear when carrier energy reaches that of optical phonons, which is very high in h‐BN encapsulated graphene. This device is the first ultra‐fast optoelectronic sampler based on the bolometric effect.
- Open Access
- 1 July 2023
- Published by AIP Publishing in APL Photonics
- Vol. 8 (7)
Mid-infrared integrated silicon–germanium ring resonator with high Q-factor
We report the realization of a silicon–germanium on silicon ring resonator with high Q-factor at mid-infrared wavelengths. The fabricated ring exhibits a loaded Q-factor of 236 000 at the operating wavelength of 4.18 µm. Considering the combined waveguide propagation losses and bending losses, which are measured to be below 0.2 dB/cm, even higher Q-factors could be achieved on this platform. Furthermore, our dispersion engineering of the waveguides should make these microrings suitable for nonlinear optical applications. These results pave the way for sensing applications and nonlinear optics in the mid-infrared range.
- 1 July 2023
- Published by AIP Publishing in APL Photonics
- Vol. 8 (7)
Open AccessMid-infrared integrated silicon–germanium ring resonator with high Q-factor
We report the realization of a silicon–germanium on silicon ring resonator with high Q-factor at mid-infrared wavelengths. The fabricated ring exhibits a loaded Q-factor of 236 000 at the operating wavelength of 4.18 µm. Considering the combined waveguide propagation losses and bending losses, which are measured to be below 0.2 dB/cm, even higher Q-factors could be achieved on this platform. Furthermore, our dispersion engineering of the waveguides should make these microrings suitable for nonlinear optical applications. These results pave the way for sensing applications and nonlinear optics in the mid-infrared range.
- 14 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. PP (1077260X) , 1-13
Canonical Resonant Four-Wave-Mixing in Photonic Crystal Cavities : tuning, tolerances and scaling
We refer to Canonical Resonant Four-Wave-Mixing when only four (three in the degenerate case) modes of the cavity are able to interact through this parametric process; thereby inhibiting competing parametric processes. This condition is achieved in the recently introduced photonic crystal parametric oscillator, Marty et al. Nat. Photonics, 15 , 53 (2021). Here, we discuss extensively the properties of this parametric source and compare the design with other geometries of photonic crystal resonators. Based on a statistical study over more than 100 resonators and 10 parametric oscillators, robustness against fabrication tolerances is assessed, performances are evaluated in terms of average values and their dispersion, and the dependence on the main parameters is shown to follow the theoretical scaling. The lowest pump power at threshold is $\approx$ 40 $\mu$ W and we show the existence of a minimum value of the cavity photon lifetime as a condition for parametric oscillation, which is related to three photon absorption.
- 14 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. PP (1077260X) , 1-13
Canonical Resonant Four-Wave-Mixing in Photonic Crystal Cavities : tuning, tolerances and scaling
We refer to Canonical Resonant Four-Wave-Mixing when only four (three in the degenerate case) modes of the cavity are able to interact through this parametric process; thereby inhibiting competing parametric processes. This condition is achieved in the recently introduced photonic crystal parametric oscillator, Marty et al. Nat. Photonics, 15 , 53 (2021). Here, we discuss extensively the properties of this parametric source and compare the design with other geometries of photonic crystal resonators. Based on a statistical study over more than 100 resonators and 10 parametric oscillators, robustness against fabrication tolerances is assessed, performances are evaluated in terms of average values and their dispersion, and the dependence on the main parameters is shown to follow the theoretical scaling. The lowest pump power at threshold is $\approx$ 40 $\mu$ W and we show the existence of a minimum value of the cavity photon lifetime as a condition for parametric oscillation, which is related to three photon absorption.
- 1 January 2022
- Published by Optica Publishing Group
- p. JW3B.184
Quasi-Phase Matched Second Harmonic Generation in Orientation-Patterned Gallium Phosphide Waveguides
We demonstrate continuous-wave second-harmonic generation from 1.5 µm lasers in orientation-patterned gallium phosphide waveguides with 200 %/W.cm2 efficiency, to our knowledge the highest reported conversion efficiency in this platform.
- 1 January 2022
- Published by Optica Publishing Group
- p. JW3B.184
Quasi-Phase Matched Second Harmonic Generation in Orientation-Patterned Gallium Phosphide Waveguides
We demonstrate continuous-wave second-harmonic generation from 1.5 µm lasers in orientation-patterned gallium phosphide waveguides with 200 %/W.cm2 efficiency, to our knowledge the highest reported conversion efficiency in this platform.
- Open Access
- 1 December 2019
- Published by AIP Publishing in APL Photonics
- Vol. 4 (12) , 120801
Hybrid InGaP nanobeam on silicon photonics for efficient four wave mixing
We report the design, fabrication, and characterization of a photonic crystal microresonator exhibiting a constant free spectral range. More than 50 resonances with Q > 2 × 105 are observed in a 200 μm long and 650 nm wide III–V semiconductor cavity heterogeneously integrated on a silicon photonic circuit (Silicon on Insulator). We measured stimulated four wave mixing with a −12 dB signal to idler conversion. Two photon absorption is prevented owing to the wide electronic bandgap of the III–V semiconductor (indium gallium phosphide) enabling the possibility to use sufficiently large optical power densities for efficient nonlinear parametric interactions.
- 1 December 2019
- Published by AIP Publishing in APL Photonics
- Vol. 4 (12) , 120801
Open AccessHybrid InGaP nanobeam on silicon photonics for efficient four wave mixing
We report the design, fabrication, and characterization of a photonic crystal microresonator exhibiting a constant free spectral range. More than 50 resonances with Q > 2 × 105 are observed in a 200 μm long and 650 nm wide III–V semiconductor cavity heterogeneously integrated on a silicon photonic circuit (Silicon on Insulator). We measured stimulated four wave mixing with a −12 dB signal to idler conversion. Two photon absorption is prevented owing to the wide electronic bandgap of the III–V semiconductor (indium gallium phosphide) enabling the possibility to use sufficiently large optical power densities for efficient nonlinear parametric interactions.
- Open Access
- 17 April 2019
- Published by Optica Publishing Group in Optics Express
- Vol. 27 (9) , 12182
High frequency optomechanical disk resonators in III–V ternary semiconductors: erratum
An erratum is presented to correct for a typo in the appendix of the original article.
- 17 April 2019
- Published by Optica Publishing Group in Optics Express
- Vol. 27 (9) , 12182
Open AccessHigh frequency optomechanical disk resonators in III–V ternary semiconductors: erratum
An erratum is presented to correct for a typo in the appendix of the original article.
- 1 January 2018
- Published by Optica Publishing Group
- p. STh3A.1
CMOS-Compatible High-Q Photonic Crystal Cavities
All-Solid Cladding Photonic Crystal Cavities have been fabricated in CMOS foundry. A recent design concept resulted into a measured Q-factor of 0.6 million (4.1 × 105 in average). Statistical analysis leads to an estimate of the fabrication disorder of 1.2 nm.
- 1 January 2018
- Published by Optica Publishing Group
- p. STh3A.1
CMOS-Compatible High-Q Photonic Crystal Cavities
All-Solid Cladding Photonic Crystal Cavities have been fabricated in CMOS foundry. A recent design concept resulted into a measured Q-factor of 0.6 million (4.1 × 105 in average). Statistical analysis leads to an estimate of the fabrication disorder of 1.2 nm.
- 19 November 2017
- Published by Springer Nature
- p. 107-137
Nanophotonic Approach to Energy-Efficient Ultra-Fast All-Optical Gates
- 19 November 2017
- Published by Springer Nature
- p. 107-137
Nanophotonic Approach to Energy-Efficient Ultra-Fast All-Optical Gates