HXHanhua Xu

Hanhua Xu

*This is an algorithmically generated author record based on publicly available information.

Hanhua Xu has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Finite Element Analysis of Combined Bearing Characteristics of Pile–Soil Interaction in Composite Foundation

    by Sugang Sui, Xiaoyan Zhang, Kaiyu Lu, Ze Li, Wenlian Liu, Hanhua Xu, Pengwei Han

    Composite foundations have been widely used and promoted in practical engineering applications. However, research on the joint-bearing mechanism of piles and soil within composite foundations is still not comprehensive enough. This paper proposes a method for calculating the additional internal forces of piles and soil within composite foundations. Based on a three-dimensional finite element analysis, this study investigates the variation patterns of the stress, displacement, and additional internal forces of piles and soil in the depth direction under the action of upper loads when using friction piles and end-bearing piles. This research aims to reveal the bearing performance of piles and soil. The results showed that, under the same conditions and due to the presence of end-bearing effects, the internal forces experienced by the entire pile body of the end-bearing piles were more uniform, exhibiting significant advantages in resisting deformation and being able to withstand larger loads. Additionally, the diffusion mechanism of the vertical forces, stresses, and displacements of piles and soil is discussed. Due to the negative frictional resistance of soil and the influence of pile end-bearing effects, the distribution of internal forces and the displacements of piles and soil exhibited different characteristics. This study provides a scientific reference for the theoretical analysis and design of composite foundations.


  • Open Access

    Study on the Corrosion Behavior of Cemented Organic Soil in Dianchi Lake, China

    by Wenlian Liu, Jing Cao, Yunfei Song, Sugang Sui, Hanhua Xu, Yongfa Guo, Wenyun Ding, Siyang Huang

    To study the corrosion behavior of cement soil in peat soil, the experiment involves the preparation of peat soil by incorporating humic acid into cohesive soil with a lower organic matter content. Cement soil samples are then prepared by adding cement to the mixture. These samples are subjected to immersion in fulvic acid solution and deionized water to simulate different working environments of cement soil. The experiment considers immersion time as the variable factor. It conducts observations of apparent phenomena, ion leaching tests, and unconfined compression strength tests on the cement soil. The experiment results are as follows: (1) With increasing immersion time, the surface of the cement soil in the peat soil environment experiences the disappearance of Ca(OH)2 and calcium aluminate hydrate. Additionally, large amounts of bird dropping crystals precipitate on the surface and within the specimen. The cement soil undergoes localized disintegration due to extensive erosion caused by swelling forces. (2) In the peat soil environment, fulvic acid reacts with the hydration products of cement, resulting in partial leaching of ions such as Ca2+, Mg2+, Al3+, and Fe3+ into the immersion solution. The lower the pH of the fulvic acid immersion (indicating higher concentration), the more significant the ion leaching. Increasing the ratio of humic acid to cement can slow down the leaching of ions. The cement soil undergoes dissolutive erosion in the peat soil environment. (3) The peat soil environment exerts both strengthening and corrosive effects on the cement soil. Cement soil without humic acid exhibits noticeable corrosion in the peat soil environment, gradually decreasing strength as immersion time increases. The strength decreases by 83% from 28 to 365 days. In contrast, cement soil with humic acid experiences an initial period of strengthening, leading to a significant increase in strength in the short term (34% increase from 28 to 90 days). However, the corrosive effects gradually dominate, resulting in a decrease in strength over time. The strength decreases by 80% from 90 to 365 days. This study also explores the strengthening effects of peat soil on cement soil. It identifies phenomena such as extensive erosion and new substance precipitation in cement soil.


  • Open Access

    Experimental Study on the Corrosion of Fulvic Acid to Cement-Soil and Its Microstructures in the Peat Soil Environment

    by Jing Cao, Shuyu Lei, Wenlian Liu, Yunfei Song, Sugang Sui, Hanhua Xu, Yongfa Guo, Wenyun Ding

    In underground engineering, cement-soil reinforcement beneath a peat soil environment is a significant challenge. To investigate the corrosiveness of fulvic acid on cement-soil and its micro and fine structure changes under the peat soil environment (PSE), an experiment was conducted to prepare peat soil by mixing humic acid (HA) into an alluvial clayey soil and then adding cement to make a cement-soil specimen, which was soaked in a fulvic acid (FA) solution and deionized water to simulate the different working of the cement-soil. The experiment was carried out by a scanning electron microscopy (SEM) test, mercury intrusion porosimetry (MIP) test, pore (particle) and fracture image recognition and analysis (PCAS), and unconfined compressive strength (UCS) test on cement-soil with soaking time as the variation factor. The results show that: In the deionized water environment, the structural characteristics of the cement-soil exhibited a gradual enhancement followed by a slight weakening. Conversely, when placed in a peat soil environment, the strength of the cement-soil initially increased at a slow rate due to the gelling and filling impact of fulvic acid. However, in the later stages, the corrosive influence of fulvic acid became dominant. This led to an enlargement of the pore space within the cement-soil, resulting in a gradual deterioration of its structure. Consequently, the strength of the cement-soil displayed a pattern of slow initial increase followed by a rapid decrease.


  • Open Access

    Bearing Capacity of Karst Cave Roof under Pile Foundation Load Using Limit Analysis

    by Ze Li, Kaiyu Lu, Wenlian Liu, Hebo Wang, Pu Peng, Hanhua Xu

    Reducing the computational workload by simplifying the analysis of karst foundations into a plane strain problem can yield significant advantages. Yet, such an approach fails in reproducing the engineering situation in a rigorous manner. In this regard, this paper proposes an upper-bound method that can effectively analyze the bearing capacity of three-dimensional karst foundations. This method is utilized to investigate the impact of various pile diameters, the ratio of roof thickness to pile diameter, and the ratio of cave width to pile diameter on the stability of karst foundations. The validity of this method is established through an illustrative example. The outcomes illustrate that when subjected to both tensile and compressive horizontal stresses if the maximum horizontal stress surpasses the tensile strength of the rock mass, the roof rock mass may suffer damage. Increasing the ratio of roof thickness to pile diameter can bring down the horizontal stress value. The stability factor is largely influenced by the ratio of roof thickness to pile diameter. The most prominent growth trend of the stability factor is observed when the ratio is less than 3. If the ratio of the roof thickness to pile diameter exceeds 3, the prediction of the bearing capacity estimation for the karst foundation in three-dimensional circumstances is more conservative than that in two-dimensional circumstances.


  • Open Access

    Slope Failure Risk Assessment Considering Both the Randomness of Groundwater Level and Soil Shear Strength Parameters

    by Pu Peng, Ze Li, Xiaoyan Zhang, Wenlian Liu, Sugang Sui, Hanhua Xu

    Conducting research on slope failure risk assessment is beneficial for the sustainable development of slopes. There will be various failure modes considering both the randomness of the groundwater level and soil shear strength parameters. Based on the integrated failure probability (IFP), the traditional failure risk analysis needs to count all failure modes, including the failure probability (Pf) and failure risk coefficient (C), one-by-one. A new slope failure risk assessment method that uses the sum of the element failure risk to calculate the overall failure risk is proposed in this paper and considers both the randomness of the groundwater level and soil shear strength parameters. The element failure probability is determined by their location information and failure situation; the element failure risk coefficient is determined by their area. It transforms the complex overall failure risk problem into a simple element failure risk problem, which simplifies the calculation process and improves the calculation efficiency greatly. The correctness is verified with the systematic analysis of a classical case. The results show that the slope failure probability and failure risk are greatly increased from 1.40% to 3.30% and 0.829 m2 to 2.094 m2 with rising groundwater level, respectively.


  • Open Access

    Lower Bound Limit Analysis of Non-Persistent Jointed Rock Masses Using Mixed Numerical Discretization

    by Wenlian Liu, Hanhua Xu, Sugang Sui, Ze Li, Xiaoyan Zhang, Pu Peng

    The bearing capacity of a non-persistent jointed rock mass containing a rock bridge is investigated by combining the lower bound limit analysis theory, a mixed numerical discrete method, and linear mathematical programming. A mixed numerical discrete method is proposed to divide non-persistent jointed rock masses in which rigid block elements are used to simulate the rock blocks, whereas the finite element method is used to simulate the intact rock bridges. A linear mathematical programming model for the ultimate bearing capacity is constructed and solved using the interior point algorithm. The proposed formulation is validated by application to three rock slopes.