Arvid Åkerblom
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Arvid Åkerblom has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Christer Fureby
Lund University
5 shared publications - Alessandro Ercole
Department of Energy Sciences, Lund University, P.O. Box 118, SE 221-00 Lund, Sweden
1 shared publication Christer Fureby
Lund University
1 shared publication- Elna Johanna Kristina Nilsson
Combustion Physics, Department of Physics, Lund University, Lund, Sweden
1 shared publication - Francesco Pignatelli
Department of Energy Sciences, Lund University, P.O. Box 118, SE 221-00 Lund, Sweden
1 shared publication - Martin Passad
Department of Physics, Lund University, P.O. Box 118, SE 221-00 Lund, Sweden
1 shared publication
Latest Publications
- 1 May 2026
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 64 (5) , 2647-2659
Chemistry Mapping in Large-Eddy Simulations of Bluff-Body Flames Using Alternative Jet Fuels
In numerical combustion research, accurate chemical reaction mechanisms for heavy hydrocarbons are essential to investigate the flame dynamics of sustainable aviation fuels (SAF) relative to conventional jet fuels. However, accounting for hundreds or thousands of reactions makes finite-rate chemistry (FRC) large-eddy simulations (LES) impractical for realistic engineering scenarios. Here, a multidimensional chemistry coordinate mapping (CCM) approach is employed to reduce the computational expense of FRC-LES for jet fuel combustion. In the CCM methodology, the flow transport equations are directly integrated (DI) in the computational cells in physical space, whereas the chemical reactions are integrated in a phase space made up of a few principal variables, improving simulation efficiency. In a turbulent premixed bluff-body burner, the LES-CCM method is compared with experimental data and LES-DI results for conventional fuels Jet A (or A2) and JP5 (or A3) and alternative synthetic fuels, referred to as C1 and C5. The skeletal HyChem reaction mechanisms are utilized, ranging from 40 to 50 species and 200 to 300 reactions. A satisfying compromise is achieved between the accuracy of the results and the speedup factor, on average around three, depending on the CCM phase space dimension and the size of the reaction mechanism.
- 1 May 2026
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 64 (5) , 2647-2659
Chemistry Mapping in Large-Eddy Simulations of Bluff-Body Flames Using Alternative Jet Fuels
In numerical combustion research, accurate chemical reaction mechanisms for heavy hydrocarbons are essential to investigate the flame dynamics of sustainable aviation fuels (SAF) relative to conventional jet fuels. However, accounting for hundreds or thousands of reactions makes finite-rate chemistry (FRC) large-eddy simulations (LES) impractical for realistic engineering scenarios. Here, a multidimensional chemistry coordinate mapping (CCM) approach is employed to reduce the computational expense of FRC-LES for jet fuel combustion. In the CCM methodology, the flow transport equations are directly integrated (DI) in the computational cells in physical space, whereas the chemical reactions are integrated in a phase space made up of a few principal variables, improving simulation efficiency. In a turbulent premixed bluff-body burner, the LES-CCM method is compared with experimental data and LES-DI results for conventional fuels Jet A (or A2) and JP5 (or A3) and alternative synthetic fuels, referred to as C1 and C5. The skeletal HyChem reaction mechanisms are utilized, ranging from 40 to 50 species and 200 to 300 reactions. A satisfying compromise is achieved between the accuracy of the results and the speedup factor, on average around three, depending on the CCM phase space dimension and the size of the reaction mechanism.
- Open Access
- 3 April 2025
- Published by Springer Nature in Flow, Turbulence and Combustion
- Vol. 114 (4) , 1315-1339
LES Modeling of the DLR Generic Single-Cup Spray Combustor: Comparison of Exploratory Category C Jet Fuels
The combustion of conventional Jet A, alongside two alternative jet fuels, C1 and C5, is simulated with Large Eddy Simulations (LES) in a generic single-cup spray combustor during idle and cruise conditions. The spray is modeled using Lagrangian particle tracking and the combustion chemistry of each fuel is modeled by skeletal reaction mechanisms. The volatility and atomizability of each fuel directly affect the spray penetration depth, with Jet A having the longest spray and C5 the shortest. All fuels have qualitatively similar flames at idle conditions, but the Jet A flame is relatively lifted at cruise conditions. C1 and C5 have similar flames despite different spray lengths, likely due to the rapid breakup of C1. The fuels produce different emission profiles, which is connected to their respective H/C ratios, equivalence ratios, and aromatics contents. NOx emissions are particularly affected by the mixture fraction in the flame, resulting in high NOx emissions for the compact C1 and C5 flames. Thermoacoustic oscillations are observed in all simulations but are strongest for C1 and C5, which we hypothesize is a result of their high volatility.
- 3 April 2025
- Published by Springer Nature in Flow, Turbulence and Combustion
- Vol. 114 (4) , 1315-1339
Open AccessLES Modeling of the DLR Generic Single-Cup Spray Combustor: Comparison of Exploratory Category C Jet Fuels
The combustion of conventional Jet A, alongside two alternative jet fuels, C1 and C5, is simulated with Large Eddy Simulations (LES) in a generic single-cup spray combustor during idle and cruise conditions. The spray is modeled using Lagrangian particle tracking and the combustion chemistry of each fuel is modeled by skeletal reaction mechanisms. The volatility and atomizability of each fuel directly affect the spray penetration depth, with Jet A having the longest spray and C5 the shortest. All fuels have qualitatively similar flames at idle conditions, but the Jet A flame is relatively lifted at cruise conditions. C1 and C5 have similar flames despite different spray lengths, likely due to the rapid breakup of C1. The fuels produce different emission profiles, which is connected to their respective H/C ratios, equivalence ratios, and aromatics contents. NOx emissions are particularly affected by the mixture fraction in the flame, resulting in high NOx emissions for the compact C1 and C5 flames. Thermoacoustic oscillations are observed in all simulations but are strongest for C1 and C5, which we hypothesize is a result of their high volatility.
- Open Access
- 11 December 2024
- Published by Elsevier in Combustion and Flame
- Vol. 272
Large eddy simulations of turbulent premixed bluff body flames operated with ethanol, n-heptane, and jet fuels
- 11 December 2024
- Published by Elsevier in Combustion and Flame
- Vol. 272
Open AccessLarge eddy simulations of turbulent premixed bluff body flames operated with ethanol, n-heptane, and jet fuels
- Open Access
Numerical Modeling of Chemical Kinetics, Spray Dynamics, and Turbulent Combustion towards Sustainable Aviation
With growing interest in sustainable civil supersonic and hypersonic aviation, there is a need to model the combustion of alternative, sustainable jet fuels. This work presents numerical simulations of several related phenomena, including laminar flames, ignition, and spray flames. Two conventional jet fuels, Jet A and JP-5, and two alternative jet fuels, C1 and C5, are targeted. The laminar burning velocities of these fuels are predicted using skeletal and detailed reaction mechanisms. The ignition delay times are predicted in the context of dual-mode ramjet engines. Large Eddy Simulations (LES) of spray combustion in an aeroengine are carried out to investigate how the different thermodynamic and chemical properties of alternative fuels lead to different emergent behavior. A novel set of thermodynamic correlations are developed for the spray model. The laminar burning velocity predictions are normalized by heat of combustion to reveal a more distinct fuel trend, with C1 burning slowest and C5 fastest. The ignition results highlight the contributions of the Negative Temperature Coefficient (NTC) effect, equivalence ratio, and hydrogen enrichment in determining ignition time scales in dual-mode ramjet engines. The spray results reveal that the volatile alternative jet fuels have short penetration depths and that the flame of the most chemically divergent fuel (C1) stabilizes relatively close to the spray.
Open AccessNumerical Modeling of Chemical Kinetics, Spray Dynamics, and Turbulent Combustion towards Sustainable Aviation
With growing interest in sustainable civil supersonic and hypersonic aviation, there is a need to model the combustion of alternative, sustainable jet fuels. This work presents numerical simulations of several related phenomena, including laminar flames, ignition, and spray flames. Two conventional jet fuels, Jet A and JP-5, and two alternative jet fuels, C1 and C5, are targeted. The laminar burning velocities of these fuels are predicted using skeletal and detailed reaction mechanisms. The ignition delay times are predicted in the context of dual-mode ramjet engines. Large Eddy Simulations (LES) of spray combustion in an aeroengine are carried out to investigate how the different thermodynamic and chemical properties of alternative fuels lead to different emergent behavior. A novel set of thermodynamic correlations are developed for the spray model. The laminar burning velocity predictions are normalized by heat of combustion to reveal a more distinct fuel trend, with C1 burning slowest and C5 fastest. The ignition results highlight the contributions of the Negative Temperature Coefficient (NTC) effect, equivalence ratio, and hydrogen enrichment in determining ignition time scales in dual-mode ramjet engines. The spray results reveal that the volatile alternative jet fuels have short penetration depths and that the flame of the most chemically divergent fuel (C1) stabilizes relatively close to the spray.
- Open Access
- 11 December 2023
- Published by Springer Nature in Flow, Turbulence and Combustion
- Vol. 112 (2) , 557-585
LES Modeling of the DLR Generic Single-Cup Spray Combustor: Validation and the Impact of Combustion Chemistry
Turbulent spray combustion in a generic kerosene-fueled single-cup combustor at typical idle and cruise conditions of an aeroengine are studied with Large Eddy Simulations (LES) using Lagrangian spray and finite-rate chemistry combustion modeling. Three reaction mechanisms of varying complexity are used to model the combustion chemistry. The choice of turbulence-chemistry interaction model is shown to affect the results significantly. The impact of the choice of chemical reaction mechanism and the difference in operating conditions are gauged in terms of time-averaged flow, spray, and combustion characteristics as well as unsteady behavior. Good agreement between LES predictions and experimental results are generally observed but with a notable dependence on the choice of chemical reaction mechanism. The mechanism specifically targeting Jet A displays the best agreement. The choice of reaction mechanism is further demonstrated to influence the flow and thermoacoustics in the combustor, resulting in different thermoacoustic modes dominating. The spray cone is found to be too narrow and thin, an inaccuracy which could be remedied by either making the injection method more empirical or by introducing additional models.
- 11 December 2023
- Published by Springer Nature in Flow, Turbulence and Combustion
- Vol. 112 (2) , 557-585
Open AccessLES Modeling of the DLR Generic Single-Cup Spray Combustor: Validation and the Impact of Combustion Chemistry
Turbulent spray combustion in a generic kerosene-fueled single-cup combustor at typical idle and cruise conditions of an aeroengine are studied with Large Eddy Simulations (LES) using Lagrangian spray and finite-rate chemistry combustion modeling. Three reaction mechanisms of varying complexity are used to model the combustion chemistry. The choice of turbulence-chemistry interaction model is shown to affect the results significantly. The impact of the choice of chemical reaction mechanism and the difference in operating conditions are gauged in terms of time-averaged flow, spray, and combustion characteristics as well as unsteady behavior. Good agreement between LES predictions and experimental results are generally observed but with a notable dependence on the choice of chemical reaction mechanism. The mechanism specifically targeting Jet A displays the best agreement. The choice of reaction mechanism is further demonstrated to influence the flow and thermoacoustics in the combustor, resulting in different thermoacoustic modes dominating. The spray cone is found to be too narrow and thin, an inaccuracy which could be remedied by either making the injection method more empirical or by introducing additional models.
- Open Access
Numerical Simulations of Spray Combustion in Jet Engines
The aviation sector is facing a massive change in terms of replacing the currently used fossil jet fuels (Jet A, JP5, etc.) with non-fossil jet fuels from sustainable feedstocks. This involves several challenges and, among them, we have the fundamental issue of current jet engines being developed for the existing fossil jet fuels. To facilitate such a transformation, we need to investigate the sensitivity of jet engines to other fuels, having a wider range of thermophysical specifications. The combustion process is particularly important and difficult to characterize with respect to fuel characteristics. In this study, we examine premixed and pre-vaporized combustion of dodecane, Jet A, and a synthetic test fuel, C1, based on the alcohol-to-jet (ATJ) certified pathway behind an equilateral bluff-body flameholder, spray combustion of Jet A and C1 in a laboratory combustor, and spray combustion of Jet A and C1 in a single-sector model of a helicopter engine by means of numerical simulations. A finite rate chemistry (FRC) large eddy simulation (LES) approach is adopted and used together with small comprehensive reaction mechanisms of around 300 reversible reactions. Comparison with experimental data is performed for the bluff-body flameholder and laboratory combustor configurations. Good agreement is generally observed, and small to marginal differences in combustion behavior are observed between the different fuels.
Open AccessNumerical Simulations of Spray Combustion in Jet Engines
The aviation sector is facing a massive change in terms of replacing the currently used fossil jet fuels (Jet A, JP5, etc.) with non-fossil jet fuels from sustainable feedstocks. This involves several challenges and, among them, we have the fundamental issue of current jet engines being developed for the existing fossil jet fuels. To facilitate such a transformation, we need to investigate the sensitivity of jet engines to other fuels, having a wider range of thermophysical specifications. The combustion process is particularly important and difficult to characterize with respect to fuel characteristics. In this study, we examine premixed and pre-vaporized combustion of dodecane, Jet A, and a synthetic test fuel, C1, based on the alcohol-to-jet (ATJ) certified pathway behind an equilateral bluff-body flameholder, spray combustion of Jet A and C1 in a laboratory combustor, and spray combustion of Jet A and C1 in a single-sector model of a helicopter engine by means of numerical simulations. A finite rate chemistry (FRC) large eddy simulation (LES) approach is adopted and used together with small comprehensive reaction mechanisms of around 300 reversible reactions. Comparison with experimental data is performed for the bluff-body flameholder and laboratory combustor configurations. Good agreement is generally observed, and small to marginal differences in combustion behavior are observed between the different fuels.