Konstantinos Chatzimanolis
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Konstantinos Chatzimanolis has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Emmanuel Kymakis
Department of Electrical & Computer Engineering Hellenic Mediterranean University (HMU) Heraklion Greece
4 shared publications - Dimitris Tsikritzis
Department of Electrical & Computer Engineering, Hellenic Mediterranean University (HMU), Heraklion 71410, Crete, Greece
2 shared publications - Boxu Feng
The Soft2D Lab State Key Laboratory of Metal Matrix Composites Shanghai Key Laboratory of Electrical Insulation and Thermal Ageing School of Chemistry and Chemical Engineering Shanghai Jiao Tong University Shanghai 200240 China
1 shared publication - Christos A. Polyzoidis
Department of Electrical & Computer Engineering, Hellenic Mediterranean University, 71410 Heraklion, Greece
1 shared publication - Christos Zervos
Brandenburg University of Technology Cottbus-Senftenberg (BTU), Cottbus, Germany
1 shared publication - George Psaltakis
Department of Electrical and Computer Engineering, Hellenic Mediterranean University (HMU), Heraklion, Greece
1 shared publication
Latest Publications
- 18 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Flexible Electronics
- Vol. 3 (8) , 363-367
Dataset of Perovskite Memristive Current–Voltage Characteristics for Pattern Recognition
The ever-increasing number of Internet of Thing devices requires the development of edge-computing platforms to address at low power consumption the associated demand for big data processing while minimizing cloud communication latency. Neuromorphic computation is a viable solution to avoid an unsustainable energy cost, however, achieving stable memristive switching is a complex process. Mixed-halide perovskite resistive memories is a promising technology that usually requires an extensive experimental characterization procedure till a stable operation mode is reached, resulting in an abundance of data that should be manually processed. In this study we build a dataset for pattern recognition based on thousands of images of experimental current-voltage (I-V) characteristics of solution-processed, and thus printable, mixed halide perovskite memristors. We have categorized our experimental data into seven distinct categories of memristive behaviour depending on the shape of the I-V curves. A machine learning (ML) approach is implemented using a convolutional neural network (CNN) trained using this image-based dataset. After the training phase, the CNN is able to categorize any new experimental I-V across the seven generic types, while a binary categorization process, by splitting the experimental data into those exhibiting good or bad switching characteristics, is demonstrated with validation accuracies of up to 91%. Overall, it is shown that this ML-based pattern recognition approach can assist in identifying how many of the tested memristive devices exhibit stable, optimum switching dynamics, and upon expanding the model, it could predict which characterization parameters are most influential toward achieving an efficient device operation.
- 18 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Flexible Electronics
- Vol. 3 (8) , 363-367
Dataset of Perovskite Memristive Current–Voltage Characteristics for Pattern Recognition
The ever-increasing number of Internet of Thing devices requires the development of edge-computing platforms to address at low power consumption the associated demand for big data processing while minimizing cloud communication latency. Neuromorphic computation is a viable solution to avoid an unsustainable energy cost, however, achieving stable memristive switching is a complex process. Mixed-halide perovskite resistive memories is a promising technology that usually requires an extensive experimental characterization procedure till a stable operation mode is reached, resulting in an abundance of data that should be manually processed. In this study we build a dataset for pattern recognition based on thousands of images of experimental current-voltage (I-V) characteristics of solution-processed, and thus printable, mixed halide perovskite memristors. We have categorized our experimental data into seven distinct categories of memristive behaviour depending on the shape of the I-V curves. A machine learning (ML) approach is implemented using a convolutional neural network (CNN) trained using this image-based dataset. After the training phase, the CNN is able to categorize any new experimental I-V across the seven generic types, while a binary categorization process, by splitting the experimental data into those exhibiting good or bad switching characteristics, is demonstrated with validation accuracies of up to 91%. Overall, it is shown that this ML-based pattern recognition approach can assist in identifying how many of the tested memristive devices exhibit stable, optimum switching dynamics, and upon expanding the model, it could predict which characterization parameters are most influential toward achieving an efficient device operation.
- Open Access
- 26 February 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13 (5) , 883
A Low-Cost and Lithium-Free Hole Transport Layer for Efficient and Stable Normal Perovskite Solar Cells
The most widely used material as a hole-transport layer (HTL) for effective normal perovskite solar cells (PSCs) is still 2,2′,7,7′-Tetrakis[N, N-di(4-methoxyphenyl)amino]-9,9′-spirobifluorene (Spiro-OMeTAD), which requires heavy doping with the hydroscopic Lithium bis(trifluoromethanesulfonyl)imide (Li-ΤFSI). However, the long-term stability and performance of PCSs are frequently hampered by the residual insoluble dopants in the HTL, Li+ diffusion throughout the device, dopant by-products, and the hygroscopic nature of Li-TFSI. Due to the high cost of Spiro-OMeTAD, alternative efficient low-cost HTLs, such as octakis(4-methoxyphenyl)spiro[fluorene-9,9′-xanthene]-2,2′,7,7′-tetraamine) (X60), have attracted attention. However, they require doping with Li-TFSI, and the devices develop the same Li-TFSI-derived problems. Here, we propose Li-free 1-Ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (EMIM-TFSI) as an efficient p-type dopant of X60, resulting in a high-quality HTL with enhanced conductivity and deeper energy levels The optimized X60:EMIM-TFSI-enabled devices exhibit a higher efficiency of 21.85% and improved stability, compared to the Li-TFSI-doped X60 devices. The stability of the optimized EMIM-TFSI-doped PSCs is greatly improved, and after 1200 hr of storage under ambient conditions, the resulting PSCs maintain 85% of the initial PCE. These findings offer a fresh method for doping the cost effective X60 as the HTL with a Li-free alternative dopant for efficient, cheaper, and reliable planar PSCs.
- 26 February 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13 (5) , 883
Open AccessA Low-Cost and Lithium-Free Hole Transport Layer for Efficient and Stable Normal Perovskite Solar Cells
The most widely used material as a hole-transport layer (HTL) for effective normal perovskite solar cells (PSCs) is still 2,2′,7,7′-Tetrakis[N, N-di(4-methoxyphenyl)amino]-9,9′-spirobifluorene (Spiro-OMeTAD), which requires heavy doping with the hydroscopic Lithium bis(trifluoromethanesulfonyl)imide (Li-ΤFSI). However, the long-term stability and performance of PCSs are frequently hampered by the residual insoluble dopants in the HTL, Li+ diffusion throughout the device, dopant by-products, and the hygroscopic nature of Li-TFSI. Due to the high cost of Spiro-OMeTAD, alternative efficient low-cost HTLs, such as octakis(4-methoxyphenyl)spiro[fluorene-9,9′-xanthene]-2,2′,7,7′-tetraamine) (X60), have attracted attention. However, they require doping with Li-TFSI, and the devices develop the same Li-TFSI-derived problems. Here, we propose Li-free 1-Ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (EMIM-TFSI) as an efficient p-type dopant of X60, resulting in a high-quality HTL with enhanced conductivity and deeper energy levels The optimized X60:EMIM-TFSI-enabled devices exhibit a higher efficiency of 21.85% and improved stability, compared to the Li-TFSI-doped X60 devices. The stability of the optimized EMIM-TFSI-doped PSCs is greatly improved, and after 1200 hr of storage under ambient conditions, the resulting PSCs maintain 85% of the initial PCE. These findings offer a fresh method for doping the cost effective X60 as the HTL with a Li-free alternative dopant for efficient, cheaper, and reliable planar PSCs.
- Open Access
- 14 December 2022
- Published by Wiley in Energy Technology
- Vol. 11 (2)
Performance and Stability Improvement of Inverted Perovskite Solar Cells by Interface Modification of Charge Transport Layers Using an Azulene–Pyridine Molecule
Herein, an azulene–pyridine molecule (AzPy) is implemented in inverted perovskite solar cells (PSCs) for increasing the power conversion efficiency (PCE) and the stability of the devices. The first goal is achieved by depositing a thin layer of AzPy on top of the hole charge transport layer (HTL). The surface engineering of HTL with AzPy improves the perovskite layer formation, thus increasing light absorption and reducing bulk nonradiative recombination while protecting the perovskite from degradation species from the HTL. This approach increases the mean PCE by approximately 6%. The second goal of improving the stability of the devices is mainly achieved by replacing the hydrophilic bathocuproine (BCP) with the more hydrophobic AzPy. By the development of an AzPy layer over the electron transport layer (ETL), the stability of the PSCs is increased under ambient conditions and thermal or light stress, without affecting the PCE. The two proposed interface engineering approaches are both implemented in the device in conjunction with the perovskite surface treatment with n‐hexylammonium bromide, resulting in devices that deliver a PCE of 20.42% and increased thermal and light stability, thus retaining 90% of their initial PCE for more than 1200 h under ambient conditions.
- 14 December 2022
- Published by Wiley in Energy Technology
- Vol. 11 (2)
Open AccessPerformance and Stability Improvement of Inverted Perovskite Solar Cells by Interface Modification of Charge Transport Layers Using an Azulene–Pyridine Molecule
Herein, an azulene–pyridine molecule (AzPy) is implemented in inverted perovskite solar cells (PSCs) for increasing the power conversion efficiency (PCE) and the stability of the devices. The first goal is achieved by depositing a thin layer of AzPy on top of the hole charge transport layer (HTL). The surface engineering of HTL with AzPy improves the perovskite layer formation, thus increasing light absorption and reducing bulk nonradiative recombination while protecting the perovskite from degradation species from the HTL. This approach increases the mean PCE by approximately 6%. The second goal of improving the stability of the devices is mainly achieved by replacing the hydrophilic bathocuproine (BCP) with the more hydrophobic AzPy. By the development of an AzPy layer over the electron transport layer (ETL), the stability of the PSCs is increased under ambient conditions and thermal or light stress, without affecting the PCE. The two proposed interface engineering approaches are both implemented in the device in conjunction with the perovskite surface treatment with n‐hexylammonium bromide, resulting in devices that deliver a PCE of 20.42% and increased thermal and light stability, thus retaining 90% of their initial PCE for more than 1200 h under ambient conditions.
- Open Access
- 22 April 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 8 (21) , 7143-7148
Evaluating the role of phenethylamine iodide as a novel anti-solvent for enhancing performance of inverted planar perovskite solar cells
An alternate use of PEAI for enhancing the performance of inverted perovskite solar cells is demonstrated, by employing it as an anti-solvent during the perovskite fabrication process. The results show an enhancement of the open-circuit voltage as compared to the PEAI post treatment.
- 22 April 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 8 (21) , 7143-7148
Open AccessEvaluating the role of phenethylamine iodide as a novel anti-solvent for enhancing performance of inverted planar perovskite solar cells
An alternate use of PEAI for enhancing the performance of inverted perovskite solar cells is demonstrated, by employing it as an anti-solvent during the perovskite fabrication process. The results show an enhancement of the open-circuit voltage as compared to the PEAI post treatment.