OFOndřej Ferčák

Ondřej Ferčák

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ondřej Ferčák has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Sweep Angle Effects of Flow Over a Seal Whisker-Inspired Undulated Cylinder

    by Trevor Dunt, Christin T Murphy, Ondrej Fercak, Raúl Bayoán Cal, Jennifer A Franck

    Flow over a seal whisker-inspired undulated cylinder at swept back angles is computationally investigated, comparing the vortex shedding, forces, and wake characteristics to those of an equivalent smooth geometry. Numerous prior studies have demonstrated that undulated cylinders can reduce mean drag and unsteady lift oscillations; however, none have isolated the effects of the sweep angle resulting from whisker positioning in flow. Inspired by the active control seals exert over their whiskers while navigating and sensing in unsteady aquatic environments, this study investigates how such orientation influences the hydrodynamic performance of the geometry. Simulations are performed of flow across a rigid, infinite-span, undulated cylinder at sweep angles from 0 to 60° and at Reynolds numbers of 250 and 500. At zero sweep, the undulated cylinder breaks up coherent two-dimensional vortices, having the effect of reducing drag by 11.4% and root mean square lift by 90.8% compared to a smooth elliptical cylinder. With sweep added, the prominence of spanwise vortex breakup and force suppression is reduced, approximating flow over smooth ellipse geometry as sweep increases. At low sweep angles of 15 and 30 degrees, lift is still suppressed by 72.4% and 47.6% while drag results in a smaller difference of 5.7 and 1.6% reduction from a smooth ellipse. These results reinforce that sweep angle is a significant parameter both mechanically and biologically in the flow physics of whisker-inspired undulated geometries.


  • Wave-phase dependence of Reynolds shear stress in the wake of fixed-bottom offshore wind turbine via quadrant analysis

    by C. Mouchref, B. Viggiano, O. Ferčák, J. Bossuyt, N. Ali, C. Meneveau, D. Gayme, R. B Cal

    There has been an increase in recognition of the important role that the boundary layer turbulent flow structure has on wake recovery and concomitant wind farm efficiency. Most research thus far has focused on onshore wind farms, in which the ground surface is static. With the expected growth of offshore wind farms, there is increased interest in turbulent flow structures above wavy, moving surfaces and their effects on offshore wind farms. In this study, experiments are performed to analyze the turbulent structure above the waves in the wake of a fixed-bottom model wind farm, with special emphasis on the conditional averaged Reynolds stresses, using a quadrant analysis. Phase-averaged profiles show a correlation between the Reynolds shear stresses and the curvature of the waves. Using a quadrant analysis, Reynolds stress dependence on the wave phase is observed in the phase-dependent vertical position of the turbulence events. This trend is primarily seen in quadrants 1 and 3 (correlated outward and inward interactions). Quantification of the correlation between the Reynolds shear stress events and the surface waves provides insight into the turbulent flow mechanisms that influence wake recovery throughout the wake region and should be taken into consideration in wind turbine operation and placement.


  • Floating wind farm experiments through scaling for wake characterization, power extraction, and turbine dynamics

    by Juliaan Bossuyt, Ondřej Ferčák, Zein Sadek, Charles Meneveau, Dennice F. Gayme, Raúl Bayoán Cal

    In this study, wind and water tunnel experiments of turbulent wakes in a scaled floating wind farm are performed. Scaling of a floating wind farm with a scaling ratio of 1:400 is made possible by relaxing geometric scaling of the turbine platform system, such that the dynamic response can be correctly matched, and to allow for relaxing Froude scaling such that the Reynolds number can be kept large enough. Four dimensionless parameters, describing the relative importance of wind and wave loads compared to turbine inertia, are used to guide the scaled floater design. Free decay tests of the pitch and heave response confirm that the dimensionless natural frequency of the scaled model is in the typical range for full-scale floating turbines when matching the proposed four dimensionless parameters. The response and performance of a single turbine scaled model are characterized for different wind and wave conditions. Subsequently, a wind farm experiment is performed with twelve floating turbine models, organized in four rows and three columns. Particle image velocimetry measurements of the wake of the middle turbine in the third row reveal distinct differences in wake properties for different wave conditions. Conditional averaging confirms a synchronization of wake deflection with the traveling waves in the wind farm. The power outputs show distinct peaks at the wave frequencies and its harmonics, due to motions triggered by complex wave-turbine-wake interactions. The power spectrum of the aggregate power of three streamwise aligned turbines exhibits anticorrelation of motions at the wave frequency due to wave speed induced phase lag, and spatiotemporal correlations of power outputs at the frequency corresponding to the wind-convective time between two rows. These experiments using an appropriately scaled floating wind farm in a wind tunnel setup confirm distinct impacts of turbine motion on wake recovery and meandering, and measurement results highlight the intricate interactions between wave topology and wake meandering.


  • Open Access

    Multicolor dye-based flow structure visualization for seal-whisker geometry characterized by computer vision

    by Ondřej Ferčák, Kathleen M Lyons, Christin T Murphy, Kristina M Kamensky, Raúl Bayoán Cal, Jennifer A Franck

    Pinniped vibrissae possess a unique and complex three-dimensional topography, which has beneficial fluid flow characteristics such as substantial reductions in drag, lift, and vortex induced vibration. To understand and leverage these effects, the downstream vortex dynamics must be studied. Dye visualization is a traditional qualitative method of capturing these downstream effects, specifically in comparative biological investigations where complex equipment can be prohibitive. High-fidelity numerical simulations or experimental particle image velocimetry are commonplace for quantitative high-resolution flow measurements, but are computationally expensive, require costly equipment, and can have limited measurement windows. This study establishes a method for extracting quantitative data from standard dye visualization experiments on seal whisker geometries by leveraging novel but intuitive computer vision techniques, which maintain simplicity and an advantageous large experimental viewing window while automating the extraction of vortex frequency, position, and advection. Results are compared to direct numerical simulation (DNS) data for comparable geometries. Power spectra and Strouhal numbers show consistent behavior between methods for a Reynolds number of 500, with minima at the canonical geometry wavelength of 3.43 and a peak frequency of 0.2 for a Reynolds number of 250. The vortex tracking reveals a clear increase in velocity from roll-up to 3.5 whisker diameters downstream, with a strong overlap with the DNS data but shows steady results beyond the limited DNS window. This investigation provides insight into a valuable bio-inspired engineering model while advancing an analytical methodology that can readily be applied to a broad range of comparative biological studies.