Cheikh Dione
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Cheikh Dione has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
Jean-Charles Dupont
7 shared publicationsChristine Lac
CNRM, Université de Toulouse, Météo-France, CNRS, 31062 Toulouse, France
5 shared publications- Felipe Toledo
LATMOS, Observatoire de Versailles Saint-Quentin-en-Yvelines (OVSQ), Université Paris-Saclay, UVSQ, CNRS, Guyancourt, France
5 shared publications Frédéric Burnet
CNRM, Université de Toulouse, Météo-France, CNRS, 31062 Toulouse, France
5 shared publicationsGuylaine Canut
CNRM, Université de Toulouse, Météo-France, CNRS, 31062 Toulouse, France
5 shared publicationsJean-François Ribaud
Laboratoire de Météorologie Dynamique, École Polytechnique, Institut Polytechnique de Paris, 91128 Palaiseau, France
5 shared publications
Latest Publications
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Demonstrating the capability of instrumental synergy to characterize contrails at the SIRTA observatory in Paris
As part of the Climaviation project, which is funded by the French Direction Générale de l’Aviation Civile (DGAC) aiming to quantify the non-CO2 effect of civil aviation in the warming climate, this study aims to characterise the optical, macro and microphysical properties of contrails at the SIRTA observatory in Palaiseau, France. To detect contrail occurrence over the site, a co-localised instrumental synergy comprising the IPRAL Lidar (a multi-longwave lidar), a total sky camera, Sentinel-2 satellite data, and aircraft flight altitudes is used. The particular integration method is applied to the lidar backscatter coefficient to estimate the optical depth of contrails after their geometrical characteristics (base height and thickness) have been defined. The optical depth estimated with this method is validated using a CIMEL sun-photometer. The Trappes radiosoundings are used to characterise the atmospheric conditions in with the contrails form. The colour ratio and the volume and particle depolarisation ratios from the analog and photo counting signals are used to qualitatively estimate the crystal size distributions within the contrails. An analysis of ten identified contrails observed on 5 July 2019, will be presented.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessDemonstrating the capability of instrumental synergy to characterize contrails at the SIRTA observatory in Paris
As part of the Climaviation project, which is funded by the French Direction Générale de l’Aviation Civile (DGAC) aiming to quantify the non-CO2 effect of civil aviation in the warming climate, this study aims to characterise the optical, macro and microphysical properties of contrails at the SIRTA observatory in Palaiseau, France. To detect contrail occurrence over the site, a co-localised instrumental synergy comprising the IPRAL Lidar (a multi-longwave lidar), a total sky camera, Sentinel-2 satellite data, and aircraft flight altitudes is used. The particular integration method is applied to the lidar backscatter coefficient to estimate the optical depth of contrails after their geometrical characteristics (base height and thickness) have been defined. The optical depth estimated with this method is validated using a CIMEL sun-photometer. The Trappes radiosoundings are used to characterise the atmospheric conditions in with the contrails form. The colour ratio and the volume and particle depolarisation ratios from the analog and photo counting signals are used to qualitatively estimate the crystal size distributions within the contrails. An analysis of ten identified contrails observed on 5 July 2019, will be presented.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Estimation of optical and microphysical characteristics of contrails using Lidar at SIRTA observatory, Paris
Contrails are local and thin anthropogenic clouds that are difficult to predict by numerical weather forecasting models. Given their local radiative impact, it is urgent to properly document their characteristics in order to improve their parametrization in weather models and evaluate their contribution to global warming. In the framework of the Climaviation project (Funded by the French Direction Générale de l’Aviation Civile (DGAC)), this study aims to quantify the optical, geometrical and microphysical characteristics of contrails at the SIRTA observatory in Palaiseau, France. We used a co-localised instrumental synergy composed of the Lidar IPRAL (a multichannel raman Lidar), a total sky camera, and aircraft flight altitudes to detect the occurrence of contrails over the site during the 2018-2023 period. Based on three (3) case studies, the particular and molecular integration methods are applied on the Lidar backscatter, to estimate the optical depth of contrails. Vertical profiles of temperature and relative humidity from Trappes radiosoundings are used to characterize the atmospheric conditions classified into three (3) categories of contrail evolution (non-persistent, persistent, and spreading). The results show that the optical thickness of contrails can reach 0.3 for contrails formed in a thick persistent layer. It is lower for contrails developing in a non-persistent layer. During daytime, the contrails contribute to reducing the surface downwelling and upwelling measured shortwave radiation in the order of 218 and 50 W m-2 respectively. Their impact on longwave radiation is relatively negligible.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessEstimation of optical and microphysical characteristics of contrails using Lidar at SIRTA observatory, Paris
Contrails are local and thin anthropogenic clouds that are difficult to predict by numerical weather forecasting models. Given their local radiative impact, it is urgent to properly document their characteristics in order to improve their parametrization in weather models and evaluate their contribution to global warming. In the framework of the Climaviation project (Funded by the French Direction Générale de l’Aviation Civile (DGAC)), this study aims to quantify the optical, geometrical and microphysical characteristics of contrails at the SIRTA observatory in Palaiseau, France. We used a co-localised instrumental synergy composed of the Lidar IPRAL (a multichannel raman Lidar), a total sky camera, and aircraft flight altitudes to detect the occurrence of contrails over the site during the 2018-2023 period. Based on three (3) case studies, the particular and molecular integration methods are applied on the Lidar backscatter, to estimate the optical depth of contrails. Vertical profiles of temperature and relative humidity from Trappes radiosoundings are used to characterize the atmospheric conditions classified into three (3) categories of contrail evolution (non-persistent, persistent, and spreading). The results show that the optical thickness of contrails can reach 0.3 for contrails formed in a thick persistent layer. It is lower for contrails developing in a non-persistent layer. During daytime, the contrails contribute to reducing the surface downwelling and upwelling measured shortwave radiation in the order of 218 and 50 W m-2 respectively. Their impact on longwave radiation is relatively negligible.
- Open Access
- 9 February 2024
- Published by Springer Nature in Research Square
Characterization of diurnal cycle of rainfall over peanut basin in Senegal
The diurnal cycle and intra-seasonal variation of the rainfall amount, frequency and intensity, and durations are analysed using rainfall data from a dense network of 18 raingauges over Ndiaganiao in Thiès region in Senegal, during the 2007-2015 period. This study uses a high temporal resolution of rainfall data. Raingauge tilts are converted to precipitation rate per hour to further investigate the diurnal cycle across the study area. The results show that the mean rainfall amount and frequency peaks are observed around 18 00 GMT for the whole season, while the intensity peak occurred between 13 00 and 14 00 GMT. The rainfall intensity indicated the strongest spatial variability compared to rainfall amount and frequency. Most of the rainfall events had a short lifetime between 1 and 3 hours (up to 80\%). These short rainfall events contribute up to 75\% of the total rainfall over this region. However, the heavy rainfall are much longer with a lifetime between 4 and 5 hours. The intra-seasonal variability of the rainfall diurnal cycle indicates a strong variability between the start and end of the monsoon season. Indeed, rainfall events occur between 12 00 and 14 00 GMT during the onset phase of the West African Monsoon (WAM) in June-July. During the active phase of the WAM (August-September), rainfall amount and frequency show a similar pattern with a peak observed around 18 00 GMT. These results have important implications for the nowcasting early warning system over western Sahel and will contribute to the improvement of the parametrization of convection in the numerical weather prediction model.
- 9 February 2024
- Published by Springer Nature in Research Square
Open AccessCharacterization of diurnal cycle of rainfall over peanut basin in Senegal
The diurnal cycle and intra-seasonal variation of the rainfall amount, frequency and intensity, and durations are analysed using rainfall data from a dense network of 18 raingauges over Ndiaganiao in Thiès region in Senegal, during the 2007-2015 period. This study uses a high temporal resolution of rainfall data. Raingauge tilts are converted to precipitation rate per hour to further investigate the diurnal cycle across the study area. The results show that the mean rainfall amount and frequency peaks are observed around 18 00 GMT for the whole season, while the intensity peak occurred between 13 00 and 14 00 GMT. The rainfall intensity indicated the strongest spatial variability compared to rainfall amount and frequency. Most of the rainfall events had a short lifetime between 1 and 3 hours (up to 80\%). These short rainfall events contribute up to 75\% of the total rainfall over this region. However, the heavy rainfall are much longer with a lifetime between 4 and 5 hours. The intra-seasonal variability of the rainfall diurnal cycle indicates a strong variability between the start and end of the monsoon season. Indeed, rainfall events occur between 12 00 and 14 00 GMT during the onset phase of the West African Monsoon (WAM) in June-July. During the active phase of the WAM (August-September), rainfall amount and frequency show a similar pattern with a peak observed around 18 00 GMT. These results have important implications for the nowcasting early warning system over western Sahel and will contribute to the improvement of the parametrization of convection in the numerical weather prediction model.
- Open Access
- 21 December 2023
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 23 (24) , 15711-15731
Role of thermodynamic and turbulence processes on the fog life cycle during SOFOG3D experiment
In this study, we use a synergy of in situ and remote sensing measurements collected during the SOuthwest FOGs 3D experiment for processes study (SOFOG3D) field campaign in autumn and winter 2019–2020 to analyse the thermodynamic and turbulent processes related to fog formation, evolution, and dissipation across southwestern France. Based on a unique measurement dataset (synergy of cloud radar, microwave radiometer, wind lidar, and weather station data) combined with a fog conceptual model, an analysis of the four deepest fog episodes (two radiation fogs and two advection–radiation fogs) is conducted. The results show that radiation and advection–radiation fogs form under deep and thin temperature inversions, respectively. For both fog categories, the transition period from stable to adiabatic fog and the fog adiabatic phase are driven by vertical mixing associated with an increase in turbulence in the fog layer due to mechanical production (turbulence kinetic energy (TKE) up to 0.4 m2 s−2 and vertical velocity variance ( ) up to 0.04 m2 s−2) generated by increasing wind and wind shear. Our study reveals that fog liquid water path, fog top height, temperature, radar reflectivity profiles, and fog adiabaticity derived from the conceptual model evolve in a consistent manner to clearly characterise this transition. The dissipation time is observed at night for the advection–radiation fog case studies and after sunrise for the radiation fog case studies. Night-time dissipation is driven by horizontal advection generating mechanical turbulence (TKE at least 0.3 m2 s−2 and larger than 0.04 m2 s−2). Daytime dissipation is linked to the combination of thermal and mechanical turbulence related to solar heating (near-surface sensible heat flux larger than 10 W m−2) and wind shear, respectively. This study demonstrates the added value of monitoring fog liquid water content and depth (combined with wind, turbulence, and temperature profiles) and diagnostics such as fog liquid water reservoir and adiabaticity to better explain the drivers of the fog life cycle.- 21 December 2023
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 23 (24) , 15711-15731
Open AccessRole of thermodynamic and turbulence processes on the fog life cycle during SOFOG3D experiment
In this study, we use a synergy of in situ and remote sensing measurements collected during the SOuthwest FOGs 3D experiment for processes study (SOFOG3D) field campaign in autumn and winter 2019–2020 to analyse the thermodynamic and turbulent processes related to fog formation, evolution, and dissipation across southwestern France. Based on a unique measurement dataset (synergy of cloud radar, microwave radiometer, wind lidar, and weather station data) combined with a fog conceptual model, an analysis of the four deepest fog episodes (two radiation fogs and two advection–radiation fogs) is conducted. The results show that radiation and advection–radiation fogs form under deep and thin temperature inversions, respectively. For both fog categories, the transition period from stable to adiabatic fog and the fog adiabatic phase are driven by vertical mixing associated with an increase in turbulence in the fog layer due to mechanical production (turbulence kinetic energy (TKE) up to 0.4 m2 s−2 and vertical velocity variance ( ) up to 0.04 m2 s−2) generated by increasing wind and wind shear. Our study reveals that fog liquid water path, fog top height, temperature, radar reflectivity profiles, and fog adiabaticity derived from the conceptual model evolve in a consistent manner to clearly characterise this transition. The dissipation time is observed at night for the advection–radiation fog case studies and after sunrise for the radiation fog case studies. Night-time dissipation is driven by horizontal advection generating mechanical turbulence (TKE at least 0.3 m2 s−2 and larger than 0.04 m2 s−2). Daytime dissipation is linked to the combination of thermal and mechanical turbulence related to solar heating (near-surface sensible heat flux larger than 10 W m−2) and wind shear, respectively. This study demonstrates the added value of monitoring fog liquid water content and depth (combined with wind, turbulence, and temperature profiles) and diagnostics such as fog liquid water reservoir and adiabaticity to better explain the drivers of the fog life cycle. - Open Access
- 30 October 2023
- Published by Copernicus GmbH
- Vol. 2023, 1-46
Reply on RC1
In this study, we use a synergy of in-situ and remote sensing measurements collected during the Southwest FOGs 3D experiment for processes study (SOFOG3D) field campaign in autumn 2019 and winter 2020, to analyze the thermodynamic and turbulence processes related to fog formation, evolution, and dissipation across southwestern France. Based on a unique dataset with a very high resolution and a fog conceptual model, an analysis of the four heaviest fog episodes (two radiation fogs and two advection-radiation fogs) is conducted. The results show that radiation and advection-radiation fogs form under deep and thin temperature inversion, respectively. For both fog categories, the transition period from stable to adiabatic fog and the fog adiabatic phase are driven by vertical mixing associated with an increase in turbulence in the fog layer due to mechanical production (turbulence kinetic energy (TKE) up to 0.4 m2 s-2 and vertical velocity variance (σw2) up to 0.04 m2 s-2) generated by brisk wind at the supersite (advection). The dissipation time is observed at night for the advection-radiation fog case studies and during the day for the radiation fog case studies. Night-time dissipation is driven by horizontal advection generating mechanical turbulence (TKE at least 0.3 m2 s-2 and σw2 larger than 0.04 m2 s-2). Daytime dissipation is linked to the combination of thermal and mechanical turbulence related respectively to solar heating (near surface sensible heat flux larger than 10 W m-2) and advection. Through a deficit of the fog reservoir of liquid water path, the fog conceptual model estimates the dissipation time at least one hour before the observed dissipation for radiation fog cases. It gives a better estimate of the fog dissipation time for advection-radiation cases. This study also demonstrates the importance of using instrumental synergy (with microwave radiometer, wind lidar, weather station, and cloud radar) and a fog conceptual model to better predict fog characteristics and dissipation time at nowcasting ranges.
- 30 October 2023
- Published by Copernicus GmbH
- Vol. 2023, 1-46
Open AccessReply on RC1
In this study, we use a synergy of in-situ and remote sensing measurements collected during the Southwest FOGs 3D experiment for processes study (SOFOG3D) field campaign in autumn 2019 and winter 2020, to analyze the thermodynamic and turbulence processes related to fog formation, evolution, and dissipation across southwestern France. Based on a unique dataset with a very high resolution and a fog conceptual model, an analysis of the four heaviest fog episodes (two radiation fogs and two advection-radiation fogs) is conducted. The results show that radiation and advection-radiation fogs form under deep and thin temperature inversion, respectively. For both fog categories, the transition period from stable to adiabatic fog and the fog adiabatic phase are driven by vertical mixing associated with an increase in turbulence in the fog layer due to mechanical production (turbulence kinetic energy (TKE) up to 0.4 m2 s-2 and vertical velocity variance (σw2) up to 0.04 m2 s-2) generated by brisk wind at the supersite (advection). The dissipation time is observed at night for the advection-radiation fog case studies and during the day for the radiation fog case studies. Night-time dissipation is driven by horizontal advection generating mechanical turbulence (TKE at least 0.3 m2 s-2 and σw2 larger than 0.04 m2 s-2). Daytime dissipation is linked to the combination of thermal and mechanical turbulence related respectively to solar heating (near surface sensible heat flux larger than 10 W m-2) and advection. Through a deficit of the fog reservoir of liquid water path, the fog conceptual model estimates the dissipation time at least one hour before the observed dissipation for radiation fog cases. It gives a better estimate of the fog dissipation time for advection-radiation cases. This study also demonstrates the importance of using instrumental synergy (with microwave radiometer, wind lidar, weather station, and cloud radar) and a fog conceptual model to better predict fog characteristics and dissipation time at nowcasting ranges.
- Open Access
- 30 October 2023
- Published by Copernicus GmbH
- Vol. 2023, 1-46
Reply on RC2
In this study, we use a synergy of in-situ and remote sensing measurements collected during the Southwest FOGs 3D experiment for processes study (SOFOG3D) field campaign in autumn 2019 and winter 2020, to analyze the thermodynamic and turbulence processes related to fog formation, evolution, and dissipation across southwestern France. Based on a unique dataset with a very high resolution and a fog conceptual model, an analysis of the four heaviest fog episodes (two radiation fogs and two advection-radiation fogs) is conducted. The results show that radiation and advection-radiation fogs form under deep and thin temperature inversion, respectively. For both fog categories, the transition period from stable to adiabatic fog and the fog adiabatic phase are driven by vertical mixing associated with an increase in turbulence in the fog layer due to mechanical production (turbulence kinetic energy (TKE) up to 0.4 m2 s-2 and vertical velocity variance (σw2) up to 0.04 m2 s-2) generated by brisk wind at the supersite (advection). The dissipation time is observed at night for the advection-radiation fog case studies and during the day for the radiation fog case studies. Night-time dissipation is driven by horizontal advection generating mechanical turbulence (TKE at least 0.3 m2 s-2 and σw2 larger than 0.04 m2 s-2). Daytime dissipation is linked to the combination of thermal and mechanical turbulence related respectively to solar heating (near surface sensible heat flux larger than 10 W m-2) and advection. Through a deficit of the fog reservoir of liquid water path, the fog conceptual model estimates the dissipation time at least one hour before the observed dissipation for radiation fog cases. It gives a better estimate of the fog dissipation time for advection-radiation cases. This study also demonstrates the importance of using instrumental synergy (with microwave radiometer, wind lidar, weather station, and cloud radar) and a fog conceptual model to better predict fog characteristics and dissipation time at nowcasting ranges.
- 30 October 2023
- Published by Copernicus GmbH
- Vol. 2023, 1-46
Open AccessReply on RC2
In this study, we use a synergy of in-situ and remote sensing measurements collected during the Southwest FOGs 3D experiment for processes study (SOFOG3D) field campaign in autumn 2019 and winter 2020, to analyze the thermodynamic and turbulence processes related to fog formation, evolution, and dissipation across southwestern France. Based on a unique dataset with a very high resolution and a fog conceptual model, an analysis of the four heaviest fog episodes (two radiation fogs and two advection-radiation fogs) is conducted. The results show that radiation and advection-radiation fogs form under deep and thin temperature inversion, respectively. For both fog categories, the transition period from stable to adiabatic fog and the fog adiabatic phase are driven by vertical mixing associated with an increase in turbulence in the fog layer due to mechanical production (turbulence kinetic energy (TKE) up to 0.4 m2 s-2 and vertical velocity variance (σw2) up to 0.04 m2 s-2) generated by brisk wind at the supersite (advection). The dissipation time is observed at night for the advection-radiation fog case studies and during the day for the radiation fog case studies. Night-time dissipation is driven by horizontal advection generating mechanical turbulence (TKE at least 0.3 m2 s-2 and σw2 larger than 0.04 m2 s-2). Daytime dissipation is linked to the combination of thermal and mechanical turbulence related respectively to solar heating (near surface sensible heat flux larger than 10 W m-2) and advection. Through a deficit of the fog reservoir of liquid water path, the fog conceptual model estimates the dissipation time at least one hour before the observed dissipation for radiation fog cases. It gives a better estimate of the fog dissipation time for advection-radiation cases. This study also demonstrates the importance of using instrumental synergy (with microwave radiometer, wind lidar, weather station, and cloud radar) and a fog conceptual model to better predict fog characteristics and dissipation time at nowcasting ranges.
- Open Access
- 24 July 2023
- Published by Copernicus GmbH
- Vol. 2023, 1-46
Comment on egusphere-2023-1224
In this study, we use a synergy of in-situ and remote sensing measurements collected during the Southwest FOGs 3D experiment for processes study (SOFOG3D) field campaign in autumn 2019 and winter 2020, to analyze the thermodynamic and turbulence processes related to fog formation, evolution, and dissipation across southwestern France. Based on a unique dataset with a very high resolution and a fog conceptual model, an analysis of the four heaviest fog episodes (two radiation fogs and two advection-radiation fogs) is conducted. The results show that radiation and advection-radiation fogs form under deep and thin temperature inversion, respectively. For both fog categories, the transition period from stable to adiabatic fog and the fog adiabatic phase are driven by vertical mixing associated with an increase in turbulence in the fog layer due to mechanical production (turbulence kinetic energy (TKE) up to 0.4 m2 s-2 and vertical velocity variance (σw2) up to 0.04 m2 s-2) generated by brisk wind at the supersite (advection). The dissipation time is observed at night for the advection-radiation fog case studies and during the day for the radiation fog case studies. Night-time dissipation is driven by horizontal advection generating mechanical turbulence (TKE at least 0.3 m2 s-2 and σw2 larger than 0.04 m2 s-2). Daytime dissipation is linked to the combination of thermal and mechanical turbulence related respectively to solar heating (near surface sensible heat flux larger than 10 W m-2) and advection. Through a deficit of the fog reservoir of liquid water path, the fog conceptual model estimates the dissipation time at least one hour before the observed dissipation for radiation fog cases. It gives a better estimate of the fog dissipation time for advection-radiation cases. This study also demonstrates the importance of using instrumental synergy (with microwave radiometer, wind lidar, weather station, and cloud radar) and a fog conceptual model to better predict fog characteristics and dissipation time at nowcasting ranges.
- 24 July 2023
- Published by Copernicus GmbH
- Vol. 2023, 1-46
Open AccessComment on egusphere-2023-1224
In this study, we use a synergy of in-situ and remote sensing measurements collected during the Southwest FOGs 3D experiment for processes study (SOFOG3D) field campaign in autumn 2019 and winter 2020, to analyze the thermodynamic and turbulence processes related to fog formation, evolution, and dissipation across southwestern France. Based on a unique dataset with a very high resolution and a fog conceptual model, an analysis of the four heaviest fog episodes (two radiation fogs and two advection-radiation fogs) is conducted. The results show that radiation and advection-radiation fogs form under deep and thin temperature inversion, respectively. For both fog categories, the transition period from stable to adiabatic fog and the fog adiabatic phase are driven by vertical mixing associated with an increase in turbulence in the fog layer due to mechanical production (turbulence kinetic energy (TKE) up to 0.4 m2 s-2 and vertical velocity variance (σw2) up to 0.04 m2 s-2) generated by brisk wind at the supersite (advection). The dissipation time is observed at night for the advection-radiation fog case studies and during the day for the radiation fog case studies. Night-time dissipation is driven by horizontal advection generating mechanical turbulence (TKE at least 0.3 m2 s-2 and σw2 larger than 0.04 m2 s-2). Daytime dissipation is linked to the combination of thermal and mechanical turbulence related respectively to solar heating (near surface sensible heat flux larger than 10 W m-2) and advection. Through a deficit of the fog reservoir of liquid water path, the fog conceptual model estimates the dissipation time at least one hour before the observed dissipation for radiation fog cases. It gives a better estimate of the fog dissipation time for advection-radiation cases. This study also demonstrates the importance of using instrumental synergy (with microwave radiometer, wind lidar, weather station, and cloud radar) and a fog conceptual model to better predict fog characteristics and dissipation time at nowcasting ranges.
- Open Access
- 9 June 2023
- Published by Copernicus GmbH
- Vol. 2023, 1-46
Comment on egusphere-2023-1224
In this study, we use a synergy of in-situ and remote sensing measurements collected during the Southwest FOGs 3D experiment for processes study (SOFOG3D) field campaign in autumn 2019 and winter 2020, to analyze the thermodynamic and turbulence processes related to fog formation, evolution, and dissipation across southwestern France. Based on a unique dataset with a very high resolution and a fog conceptual model, an analysis of the four heaviest fog episodes (two radiation fogs and two advection-radiation fogs) is conducted. The results show that radiation and advection-radiation fogs form under deep and thin temperature inversion, respectively. For both fog categories, the transition period from stable to adiabatic fog and the fog adiabatic phase are driven by vertical mixing associated with an increase in turbulence in the fog layer due to mechanical production (turbulence kinetic energy (TKE) up to 0.4 m2 s-2 and vertical velocity variance (σw2) up to 0.04 m2 s-2) generated by brisk wind at the supersite (advection). The dissipation time is observed at night for the advection-radiation fog case studies and during the day for the radiation fog case studies. Night-time dissipation is driven by horizontal advection generating mechanical turbulence (TKE at least 0.3 m2 s-2 and σw2 larger than 0.04 m2 s-2). Daytime dissipation is linked to the combination of thermal and mechanical turbulence related respectively to solar heating (near surface sensible heat flux larger than 10 W m-2) and advection. Through a deficit of the fog reservoir of liquid water path, the fog conceptual model estimates the dissipation time at least one hour before the observed dissipation for radiation fog cases. It gives a better estimate of the fog dissipation time for advection-radiation cases. This study also demonstrates the importance of using instrumental synergy (with microwave radiometer, wind lidar, weather station, and cloud radar) and a fog conceptual model to better predict fog characteristics and dissipation time at nowcasting ranges.
- 9 June 2023
- Published by Copernicus GmbH
- Vol. 2023, 1-46
Open AccessComment on egusphere-2023-1224
In this study, we use a synergy of in-situ and remote sensing measurements collected during the Southwest FOGs 3D experiment for processes study (SOFOG3D) field campaign in autumn 2019 and winter 2020, to analyze the thermodynamic and turbulence processes related to fog formation, evolution, and dissipation across southwestern France. Based on a unique dataset with a very high resolution and a fog conceptual model, an analysis of the four heaviest fog episodes (two radiation fogs and two advection-radiation fogs) is conducted. The results show that radiation and advection-radiation fogs form under deep and thin temperature inversion, respectively. For both fog categories, the transition period from stable to adiabatic fog and the fog adiabatic phase are driven by vertical mixing associated with an increase in turbulence in the fog layer due to mechanical production (turbulence kinetic energy (TKE) up to 0.4 m2 s-2 and vertical velocity variance (σw2) up to 0.04 m2 s-2) generated by brisk wind at the supersite (advection). The dissipation time is observed at night for the advection-radiation fog case studies and during the day for the radiation fog case studies. Night-time dissipation is driven by horizontal advection generating mechanical turbulence (TKE at least 0.3 m2 s-2 and σw2 larger than 0.04 m2 s-2). Daytime dissipation is linked to the combination of thermal and mechanical turbulence related respectively to solar heating (near surface sensible heat flux larger than 10 W m-2) and advection. Through a deficit of the fog reservoir of liquid water path, the fog conceptual model estimates the dissipation time at least one hour before the observed dissipation for radiation fog cases. It gives a better estimate of the fog dissipation time for advection-radiation cases. This study also demonstrates the importance of using instrumental synergy (with microwave radiometer, wind lidar, weather station, and cloud radar) and a fog conceptual model to better predict fog characteristics and dissipation time at nowcasting ranges.
- Open Access
Projected Changes in Solar PV and Wind Energy Potential over West Africa: An Analysis of CORDEX-CORE Simulations
Renewable energy development is growing fast and is expected to expand in the next decades in West Africa as a contribution to addressing the power demand and climate change mitigation. However, the future impacts of climate change on solar PV and the wind energy potential in the region are still unclear. This study investigates the expected future impacts of climate change on solar PV and wind energy potential over West Africa using an ensemble of three regional climate models (RCMs). Each RCM is driven by three global climate models (GCMs) from the new coordinated high-resolution output for regional evaluations (CORDEX-CORE) under the RCP8.5 scenario. Two projection periods were used: the near future (2021–2050) and the far future (2071–2100). For the model evaluation, reanalysis data from ERA5 and satellite-based climate data (SARAH-2) were used. The models and their ensemble mean (hereafter Mean) show acceptable performance for the simulations of the solar PV potential, the wind power density, and related variables with some biases. The Mean predicts a general decrease in the solar PV potential over the region of about −2% in the near future and −4% in the far future. The wind power density (WPD) is expected to increase by about 20% in the near future and 40% in the far future. The changes for solar PV potential seem to be consistent, although the intensity differs according to the RCM used. For the WPD, there are some discrepancies among the RCMs in terms of intensity and direction. This study can guide governments and policymakers in decision making for future solar and wind energy projects in the region.
Open AccessProjected Changes in Solar PV and Wind Energy Potential over West Africa: An Analysis of CORDEX-CORE Simulations
Renewable energy development is growing fast and is expected to expand in the next decades in West Africa as a contribution to addressing the power demand and climate change mitigation. However, the future impacts of climate change on solar PV and the wind energy potential in the region are still unclear. This study investigates the expected future impacts of climate change on solar PV and wind energy potential over West Africa using an ensemble of three regional climate models (RCMs). Each RCM is driven by three global climate models (GCMs) from the new coordinated high-resolution output for regional evaluations (CORDEX-CORE) under the RCP8.5 scenario. Two projection periods were used: the near future (2021–2050) and the far future (2071–2100). For the model evaluation, reanalysis data from ERA5 and satellite-based climate data (SARAH-2) were used. The models and their ensemble mean (hereafter Mean) show acceptable performance for the simulations of the solar PV potential, the wind power density, and related variables with some biases. The Mean predicts a general decrease in the solar PV potential over the region of about −2% in the near future and −4% in the far future. The wind power density (WPD) is expected to increase by about 20% in the near future and 40% in the far future. The changes for solar PV potential seem to be consistent, although the intensity differs according to the RCM used. For the WPD, there are some discrepancies among the RCMs in terms of intensity and direction. This study can guide governments and policymakers in decision making for future solar and wind energy projects in the region.