Raúl Rojas-Luna
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Raúl Rojas-Luna has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Dolores Esquivel
Departamento de Química Orgánica, Instituto Químico para la Energía y el Medioambiente (IQUEMA), Facultad de Ciencias, Universidad de Córdoba, Campus de Rabanales, Edificio Marie Curie, 14071 Córdoba, Spain
12 shared publications - Francisco J. Romero-Salguero
Departamento de Química Orgánica, Instituto Químico para la Energía y el Medioambiente (IQUEMA), Facultad de Ciencias, Universidad de Córdoba, Campus de Rabanales, Edificio Marie Curie, 14071 Córdoba, Spain
11 shared publications - Souvik Roy
University of Lincoln
9 shared publications - Dolores G. Gil-Gavilán
Departamento de Química Orgánica, Instituto Químico para la Energía y el Medioambiente (IQUEMA), Facultad de Ciencias, Universidad de Córdoba, Campus de Rabanales, Edificio Marie Curie, 14071 Córdoba, Spain
7 shared publications - Juan Amaro-Gahete
Materiales Polifuncionales Basados en Carbono (UGR-Carbon), Departamento de Química Inorgánica, Unidad de Excelencia Química Aplicada a Biomedicina y Medioambiente, Universidad de Granada (UEQ-UGR), ES18071 Granada, Spain
6 shared publications - José Rafael Ruiz
Departamento de Química Orgánica, Instituto Químico para la Energía y el Medioambiente (IQUEMA), Facultad de Ciencias, Universidad de Córdoba, Campus de Rabanales, Edificio Marie Curie, 14071 Córdoba, Spain
5 shared publications
Latest Publications
- Open Access
- 25 March 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Co-Al LDH nanoclusters for enhanced visible-light-driven photocatalytic H2 production
The efficient conversion of solar energy into chemical energy represents one of the most significant challenges in contemporary society. Photocatalytic systems combining a catalyst, a photosensitizer (PS), and a sacrificial electron donor (ED) are widely explored for this purpose. Layered double hydroxides (LDHs) have shown great potential as catalysts. In this study, we demonstrate efficient photocatalytic hydrogen evolution using Co-Al LDH nanoclusters synthesized by the epoxide method in the presence of fluorescein as the photosensitizer and triethanolamine as the electron donor. Colloidal nanosized LDH display a remarkable hydrogen production of 28863 µmol H 2 g –1 after 3.5 h, while redispersed solid reached 12567 µmol H 2 g –1 . Increasing PS concentration to 1 mM further enhances the activity to 54105 µmol H 2 g –1 . By contrast, micrometric LDHs synthesized by the urea hydrolysis method produce only 2065 µmol H 2 g –1 . PL studies suggest that the acac layer on the nanosized LDH surface confers a hydrophobic environment, mitigating aggregation-induced quenching. Electrochemical experiments confirm a lower charge-transfer resistance in nanometric LDHs, explaining their superior charge transport and catalytic efficiency.
- 25 March 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessCo-Al LDH nanoclusters for enhanced visible-light-driven photocatalytic H2 production
The efficient conversion of solar energy into chemical energy represents one of the most significant challenges in contemporary society. Photocatalytic systems combining a catalyst, a photosensitizer (PS), and a sacrificial electron donor (ED) are widely explored for this purpose. Layered double hydroxides (LDHs) have shown great potential as catalysts. In this study, we demonstrate efficient photocatalytic hydrogen evolution using Co-Al LDH nanoclusters synthesized by the epoxide method in the presence of fluorescein as the photosensitizer and triethanolamine as the electron donor. Colloidal nanosized LDH display a remarkable hydrogen production of 28863 µmol H 2 g –1 after 3.5 h, while redispersed solid reached 12567 µmol H 2 g –1 . Increasing PS concentration to 1 mM further enhances the activity to 54105 µmol H 2 g –1 . By contrast, micrometric LDHs synthesized by the urea hydrolysis method produce only 2065 µmol H 2 g –1 . PL studies suggest that the acac layer on the nanosized LDH surface confers a hydrophobic environment, mitigating aggregation-induced quenching. Electrochemical experiments confirm a lower charge-transfer resistance in nanometric LDHs, explaining their superior charge transport and catalytic efficiency.
- Open Access
- 20 January 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (4) , 6937-6951
Coelectrolysis of PET and CO 2 Using an Electrochemically Restructured Co-MOF-74 Anode and a Polymeric Co-Phthalocyanine Cathode
Mitigating carbon emissions and plastic waste is a pressing societal challenge due to the disruptive environmental impact of incremental accumulation. A promising strategy to address both issues is coelectrolysis of CO2 and PET-plastic waste to high-value commodity chemicals. Here, we report electrocatalytic upcycling of polyethylene terephthalate (PET) plastic to formate and terephthalic acid using a cobalt-based metal-organic framework (Co-MOF-74). The electrocatalyst underwent oxidative restructuring to cobalt oxyhydroxide under operating conditions and exhibited near-unity faradaic efficiency (FE) for the ethylene glycol oxidation reaction (EGOR) to formate during short-term electrolysis. Notably, EGOR required 0.23 V lower potential compared to the conventional oxygen evolution reaction (OER) at a current density of 100 mA cm-2. When coupled with a CO2 reducing cathode, a maximum combined FE of 156% was achieved for formate (anode) and syngas (cathode) at a cell voltage (Ecell) of 1.6 V. Upon integration of the EGOR electrode in a CO2-fed flow cell, the coupled system required an Ecell of ∼2.3 V to operate at 75 mA cm-2. This work presents a promising integrated approach that offers a compelling solution for mitigating environmental pollution by enabling the electrochemical reforming of CO2 and plastic waste into valuable chemicals under cost-effective and energy-efficient conditions.
- 20 January 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (4) , 6937-6951
Open AccessCoelectrolysis of PET and CO 2 Using an Electrochemically Restructured Co-MOF-74 Anode and a Polymeric Co-Phthalocyanine Cathode
Mitigating carbon emissions and plastic waste is a pressing societal challenge due to the disruptive environmental impact of incremental accumulation. A promising strategy to address both issues is coelectrolysis of CO2 and PET-plastic waste to high-value commodity chemicals. Here, we report electrocatalytic upcycling of polyethylene terephthalate (PET) plastic to formate and terephthalic acid using a cobalt-based metal-organic framework (Co-MOF-74). The electrocatalyst underwent oxidative restructuring to cobalt oxyhydroxide under operating conditions and exhibited near-unity faradaic efficiency (FE) for the ethylene glycol oxidation reaction (EGOR) to formate during short-term electrolysis. Notably, EGOR required 0.23 V lower potential compared to the conventional oxygen evolution reaction (OER) at a current density of 100 mA cm-2. When coupled with a CO2 reducing cathode, a maximum combined FE of 156% was achieved for formate (anode) and syngas (cathode) at a cell voltage (Ecell) of 1.6 V. Upon integration of the EGOR electrode in a CO2-fed flow cell, the coupled system required an Ecell of ∼2.3 V to operate at 75 mA cm-2. This work presents a promising integrated approach that offers a compelling solution for mitigating environmental pollution by enabling the electrochemical reforming of CO2 and plastic waste into valuable chemicals under cost-effective and energy-efficient conditions.
- 13 January 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (3) , 1884-1899
Effect of Substituted Terpyridine Ligands on Magnetic and CO 2 Photoreduction Properties of High Spin Co(II)(tpy)Br 2
A series of monoligated cobalt terpyridine complexes, Co(R-tpy)Br2 (Co1-3), were synthesized and characterized via elemental analysis, thermogravimetric analysis, and spectroscopic techniques. The structure of Co1 was determined by single-crystal X-ray diffraction (SCXRD), showing a distorted square pyramidal geometry for Co(II). Magnetic susceptibility studies at different temperatures indicated high-spin Co(II) states, and zero-field splitting parameters (|D|>30) determined by computational techniques showed values similar to those reported for Co(tpy)Cl2, suggesting high magnetic anisotropy, which is dependent on the ligands. Co2 and Co3 gradually converted to bis-ligated cobalt complexes in solution, indicating greater instability of penta-coordinated Co compared to octahedral Co, confirmed by SCXRD of an oxidized Co(III)2b complex, formed under crystallization conditions. The complexes showed minimal electrochemical activity toward CO2 reduction in acetonitrile (icat/ip 0.4-1.2), while Co1-3 were active in CO2 photoreduction with an organic photosensitizer (TONCO ∼ 34-57). Introducing ferrocene substituents on the terpyridine ligand architecture impeded the catalytic activity, and the mechanistic insights were obtained from IR spectroelectrochemistry and in situ UV-vis spectroscopy. In summary, the CO2 photoreduction activity of Co1-3 was dependent on the substituents on the tpy ligands.
- 13 January 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (3) , 1884-1899
Effect of Substituted Terpyridine Ligands on Magnetic and CO 2 Photoreduction Properties of High Spin Co(II)(tpy)Br 2
A series of monoligated cobalt terpyridine complexes, Co(R-tpy)Br2 (Co1-3), were synthesized and characterized via elemental analysis, thermogravimetric analysis, and spectroscopic techniques. The structure of Co1 was determined by single-crystal X-ray diffraction (SCXRD), showing a distorted square pyramidal geometry for Co(II). Magnetic susceptibility studies at different temperatures indicated high-spin Co(II) states, and zero-field splitting parameters (|D|>30) determined by computational techniques showed values similar to those reported for Co(tpy)Cl2, suggesting high magnetic anisotropy, which is dependent on the ligands. Co2 and Co3 gradually converted to bis-ligated cobalt complexes in solution, indicating greater instability of penta-coordinated Co compared to octahedral Co, confirmed by SCXRD of an oxidized Co(III)2b complex, formed under crystallization conditions. The complexes showed minimal electrochemical activity toward CO2 reduction in acetonitrile (icat/ip 0.4-1.2), while Co1-3 were active in CO2 photoreduction with an organic photosensitizer (TONCO ∼ 34-57). Introducing ferrocene substituents on the terpyridine ligand architecture impeded the catalytic activity, and the mechanistic insights were obtained from IR spectroelectrochemistry and in situ UV-vis spectroscopy. In summary, the CO2 photoreduction activity of Co1-3 was dependent on the substituents on the tpy ligands.
- Open Access
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 13 (15) , 6515-6526
Covalent integration of photosensitizer and catalyst in the pore walls of periodic mesoporous organosilicas for efficient solar-driven CO 2 reduction
Dual-site periodic mesoporous organosilicas with a covalently integrated molecular photosensitiser and catalyst enable efficient visible-light-driven CO 2 -to-CO conversion through rapid photoinduced electron transfer.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 13 (15) , 6515-6526
Open AccessCovalent integration of photosensitizer and catalyst in the pore walls of periodic mesoporous organosilicas for efficient solar-driven CO 2 reduction
Dual-site periodic mesoporous organosilicas with a covalently integrated molecular photosensitiser and catalyst enable efficient visible-light-driven CO 2 -to-CO conversion through rapid photoinduced electron transfer.
- Open Access
- 23 June 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Co-Electrolysis of PET and CO2 using a Co-MOF-74-Derived Anode and a Polymeric Co-Phthalocyanine Cathode
Mitigating carbon emissions and plastic waste is a pressing societal challenge due to the disruptive environmental impact of incremental accumulation. A promising strategy to address both issues involves the development of coupled electrolysers that can utilise CO2 and PET-plastic waste as resources for electricity-driven manufacturing of high-value commodity chemicals. Here, we report electrocatalytic upcycling of polyethylene terephthalate (PET) plastic to formate and terephthalic acid using a cobalt-based metal-organic framework (Co-MOF-74). The electrocatalyst undergoes oxidative restructuring to cobalt oxyhydroxide (CoOOH) under operating conditions which is demonstrated using ex situ and in situ measurements. The MOF-derived electrocatalyst exhibited near-unity faradaic efficiency (FE) for oxidation of ethylene glycol to formate during short-term electrolysis and lowered the required potential by 0.23 V compared to the conventional oxygen evolution reaction (OER) at a current density of 100 mA cm–2. When coupled with a CO2R electrode containing a polymeric cobalt-phthalocyanine catalyst in a two-electrode configuration, a maximum combined FE of 156% was achieved for formate (anode) and syngas (cathode) at a cell voltage of 1.6 V. Upon integration of the EGOR electrode in a CO2-fed flow cell, the coupled system required a cell voltage of ~2.3 V to operate at 75 mA cm−2 current density. This work presents a promising integrated approach that offers a compelling solution for mitigating environmental pollution by enabling the electrochemical reforming of CO2 and plastic waste into valuable chemicals under cost-effective and energy-efficient conditions.
- 23 June 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessCo-Electrolysis of PET and CO2 using a Co-MOF-74-Derived Anode and a Polymeric Co-Phthalocyanine Cathode
Mitigating carbon emissions and plastic waste is a pressing societal challenge due to the disruptive environmental impact of incremental accumulation. A promising strategy to address both issues involves the development of coupled electrolysers that can utilise CO2 and PET-plastic waste as resources for electricity-driven manufacturing of high-value commodity chemicals. Here, we report electrocatalytic upcycling of polyethylene terephthalate (PET) plastic to formate and terephthalic acid using a cobalt-based metal-organic framework (Co-MOF-74). The electrocatalyst undergoes oxidative restructuring to cobalt oxyhydroxide (CoOOH) under operating conditions which is demonstrated using ex situ and in situ measurements. The MOF-derived electrocatalyst exhibited near-unity faradaic efficiency (FE) for oxidation of ethylene glycol to formate during short-term electrolysis and lowered the required potential by 0.23 V compared to the conventional oxygen evolution reaction (OER) at a current density of 100 mA cm–2. When coupled with a CO2R electrode containing a polymeric cobalt-phthalocyanine catalyst in a two-electrode configuration, a maximum combined FE of 156% was achieved for formate (anode) and syngas (cathode) at a cell voltage of 1.6 V. Upon integration of the EGOR electrode in a CO2-fed flow cell, the coupled system required a cell voltage of ~2.3 V to operate at 75 mA cm−2 current density. This work presents a promising integrated approach that offers a compelling solution for mitigating environmental pollution by enabling the electrochemical reforming of CO2 and plastic waste into valuable chemicals under cost-effective and energy-efficient conditions.
- 5 May 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (19) , 9134-9145
Zn–Cr LDH/Graphene Oxide Composites for Selective Photocatalytic CO2 Reduction toward CO under Visible Light Irradiation
- 5 May 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (19) , 9134-9145
Zn–Cr LDH/Graphene Oxide Composites for Selective Photocatalytic CO2 Reduction toward CO under Visible Light Irradiation
- Open Access
- 21 April 2025
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 9 (11) , 2961-2972
Immobilisation of a molecular iridium complex on periodic mesoporous organosilica for heterogeneous water oxidation catalysis
Heterogenised half-sandwich IrIII molecular catalysts as efficient heterogeneous water oxidation catalysts for artificial photosynthesis.
- 21 April 2025
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 9 (11) , 2961-2972
Open AccessImmobilisation of a molecular iridium complex on periodic mesoporous organosilica for heterogeneous water oxidation catalysis
Heterogenised half-sandwich IrIII molecular catalysts as efficient heterogeneous water oxidation catalysts for artificial photosynthesis.
- Open Access
- 7 August 2024
- Published by Wiley in ChemCatChem
- Vol. 16 (20)
Sulfonated Graphene‐Based Materials as Heterogeneous Acid Catalysts for Solketal Synthesis by Acetalization of Glycerol
Acid catalysis plays a pivotal role in the industrial landscape due to its multifaceted contributions to various chemical processes in numerous sectors, including petrochemicals, polymers, food processing, and biodiesel production, among others. Sulfonated graphenes hold notable relevance as heterogeneous acid catalysts due to their unique combination of graphene's structural properties and the introduction of sulfonic groups as catalytic acid sites. Herein, we report the preparation of three sulfonated graphene‐based materials – sulfonated reduced graphene oxide (rGO‐SO3H), chlorosulfonated reduced graphene oxide (rGO‐HSO3Cl) and sulfonated graphene oxide (GO‐SO3H) – by different synthetic approaches. Physicochemical, textural, morphological, and acidic properties of all materials were characterized in detail by different instrumental techniques. Innovatively, these materials have been evaluated as heterogeneous acid catalysts in the solketal synthesis by acetalization of glycerol, which is considered an interesting building block to produce added‐value products. The density of acidic active sites and hydrophobicity were found to be conditioning parameters of the resulting catalytic activity in terms of conversion and selectivity. The best catalytic performance was obtained by rGO‐SO3H, reaching the maximum conversion towards solketal in 15 minutes under mild reaction conditions. The reusability and stability of all materials were also examined after three consecutive acetalization reactions with only a slight loss of catalytic activity.
- 7 August 2024
- Published by Wiley in ChemCatChem
- Vol. 16 (20)
Open AccessSulfonated Graphene‐Based Materials as Heterogeneous Acid Catalysts for Solketal Synthesis by Acetalization of Glycerol
Acid catalysis plays a pivotal role in the industrial landscape due to its multifaceted contributions to various chemical processes in numerous sectors, including petrochemicals, polymers, food processing, and biodiesel production, among others. Sulfonated graphenes hold notable relevance as heterogeneous acid catalysts due to their unique combination of graphene's structural properties and the introduction of sulfonic groups as catalytic acid sites. Herein, we report the preparation of three sulfonated graphene‐based materials – sulfonated reduced graphene oxide (rGO‐SO3H), chlorosulfonated reduced graphene oxide (rGO‐HSO3Cl) and sulfonated graphene oxide (GO‐SO3H) – by different synthetic approaches. Physicochemical, textural, morphological, and acidic properties of all materials were characterized in detail by different instrumental techniques. Innovatively, these materials have been evaluated as heterogeneous acid catalysts in the solketal synthesis by acetalization of glycerol, which is considered an interesting building block to produce added‐value products. The density of acidic active sites and hydrophobicity were found to be conditioning parameters of the resulting catalytic activity in terms of conversion and selectivity. The best catalytic performance was obtained by rGO‐SO3H, reaching the maximum conversion towards solketal in 15 minutes under mild reaction conditions. The reusability and stability of all materials were also examined after three consecutive acetalization reactions with only a slight loss of catalytic activity.
- Open Access
- 29 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 7 (14) , 5924-5936
Manipulating the Coordination Structure of Molecular Cobalt Sites in Periodic Mesoporous Organosilica for CO2 Photoreduction
Photocatalytic CO2 reduction, including reaction rate, product selectivity, and longevity, is highly sensitive to the coordination structure of the catalytic active sites, and the precise design of the active site remains a challenge in heterogeneous catalysts. Herein, we report on the modulation of the coordination structure of MN x -type active sites (M = Co or Ni; x = 4 or 5) anchored on a periodic mesoporous organosilica (PMO) support to improve photocatalytic CO2 reduction. The PMO was functionalized with pendant 3,6-di(2'-pyridyl)pyridazine (dppz) groups to allow immobilization of molecular Co and Ni complexes with polypyridine ligands. A comparative analysis of CO2 photoreduction in the presence of an organic photosensitizer (4CzIPN, 1,2,3,5-tetrakis(carbazol-9-yl)-4,6-dicyanobenzene) and a conventional [Ru(bpy)3]Cl2 sensitizer revealed strong influence of the coordination environment on the catalytic performance. CoN5-PMO demonstrated a superior CO2 photoreduction activity than the other materials and displayed a cobalt-based turnover number (TONCO) of 92 for CO evolution at ∼75% selectivity after 3 h irradiation in the presence of 4CzIPN. The hybrid CoN5-PMO catalyst exhibited better activity than its homogeneous [CoN5] counterpart, indicating that the heterogenization promotes the formation of isolated active sites with improved longevity and faster catalytic rate.
- 29 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 7 (14) , 5924-5936
Open AccessManipulating the Coordination Structure of Molecular Cobalt Sites in Periodic Mesoporous Organosilica for CO2 Photoreduction
Photocatalytic CO2 reduction, including reaction rate, product selectivity, and longevity, is highly sensitive to the coordination structure of the catalytic active sites, and the precise design of the active site remains a challenge in heterogeneous catalysts. Herein, we report on the modulation of the coordination structure of MN x -type active sites (M = Co or Ni; x = 4 or 5) anchored on a periodic mesoporous organosilica (PMO) support to improve photocatalytic CO2 reduction. The PMO was functionalized with pendant 3,6-di(2'-pyridyl)pyridazine (dppz) groups to allow immobilization of molecular Co and Ni complexes with polypyridine ligands. A comparative analysis of CO2 photoreduction in the presence of an organic photosensitizer (4CzIPN, 1,2,3,5-tetrakis(carbazol-9-yl)-4,6-dicyanobenzene) and a conventional [Ru(bpy)3]Cl2 sensitizer revealed strong influence of the coordination environment on the catalytic performance. CoN5-PMO demonstrated a superior CO2 photoreduction activity than the other materials and displayed a cobalt-based turnover number (TONCO) of 92 for CO evolution at ∼75% selectivity after 3 h irradiation in the presence of 4CzIPN. The hybrid CoN5-PMO catalyst exhibited better activity than its homogeneous [CoN5] counterpart, indicating that the heterogenization promotes the formation of isolated active sites with improved longevity and faster catalytic rate.
- Open Access
- 22 April 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Manipulating the Coordination Structure of Molecular Cobalt Sites in Periodic Mesoporous Organosilica for CO2 Photoreduction
The catalytic activity towards CO2 photoreduction, including reaction rate, product selectivity, and longevity, is highly sensitive to the coordination structure of the catalytic active sites, and the precise design of the active site remains a challenge in heterogeneous catalysts. Herein, we report modulation of the coordination structure of MNx-type active sites (M = Co or Ni; x = 4 or 5) anchored on a periodic mesoporous organosilica (PMO) support to improve photocatalytic CO2 reduction. The PMO was functionalised with pendant 3,6-di(2′-pyridyl)pyridazine (dppz) groups to allow immobilisation of molecular Co and Ni complexes with polypyridine ligands. A comparative analysis of CO2 photoreduction in the presence of an organic photosensitizer (4CzIPN, 1,2,3,5-tetrakis(carbazol-9-yl)-4,6-dicyanobenzene) and a conventional [Ru(bpy)3]Cl2 sensitiser revealed strong influence of the coordination environment on the catalytic performance. CoN5-PMO demonstrated a superior CO2 photoreduction activity than the other materials and displayed a cobalt-based turnover number (TONCO) of 92 for CO evolution at ~75% selectivity after 3 h irradiation in the presence of 4CzIPN. The hybrid CoN5-PMO catalyst exhibited better activity than its homogeneous [CoN5] counterpart, indicating that the heterogenisation promotes the formation of isolated active sites with improved longevity and faster catalytic rate.
- 22 April 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessManipulating the Coordination Structure of Molecular Cobalt Sites in Periodic Mesoporous Organosilica for CO2 Photoreduction
The catalytic activity towards CO2 photoreduction, including reaction rate, product selectivity, and longevity, is highly sensitive to the coordination structure of the catalytic active sites, and the precise design of the active site remains a challenge in heterogeneous catalysts. Herein, we report modulation of the coordination structure of MNx-type active sites (M = Co or Ni; x = 4 or 5) anchored on a periodic mesoporous organosilica (PMO) support to improve photocatalytic CO2 reduction. The PMO was functionalised with pendant 3,6-di(2′-pyridyl)pyridazine (dppz) groups to allow immobilisation of molecular Co and Ni complexes with polypyridine ligands. A comparative analysis of CO2 photoreduction in the presence of an organic photosensitizer (4CzIPN, 1,2,3,5-tetrakis(carbazol-9-yl)-4,6-dicyanobenzene) and a conventional [Ru(bpy)3]Cl2 sensitiser revealed strong influence of the coordination environment on the catalytic performance. CoN5-PMO demonstrated a superior CO2 photoreduction activity than the other materials and displayed a cobalt-based turnover number (TONCO) of 92 for CO evolution at ~75% selectivity after 3 h irradiation in the presence of 4CzIPN. The hybrid CoN5-PMO catalyst exhibited better activity than its homogeneous [CoN5] counterpart, indicating that the heterogenisation promotes the formation of isolated active sites with improved longevity and faster catalytic rate.